hwmon/w83627hf: Preliminary cleanups

Some preliminary cleanups to the w83627hf hardware monitoring driver,
to make its conversion to a platform driver easier:

* Add missing include ioport.h
* Drop unused enum value any_chip
* Group module parameters
* Define and use DRVNAME
* Drop unused struct member lm75
* Move the handling of force_addr and device activation to
  w83627hf_find
* Consistently use local type in w83627hf_init_client

Signed-off-by: Jean Delvare <khali@linux-fr.org>

diff --git a/drivers/hwmon/w83627hf.c b/drivers/hwmon/w83627hf.c
index 3ed67a5..7738d30 100644 (file)
--- a/drivers/hwmon/w83627hf.c
+++ b/drivers/hwmon/w83627hf.c
@@ -48,9 +48,16 @@
 #include <linux/hwmon-vid.h>
 #include <linux/err.h>
 #include <linux/mutex.h>
+#include <linux/ioport.h>
 #include <asm/io.h>
 #include "lm75.h"
 
+/* The actual ISA address is read from Super-I/O configuration space */
+static unsigned short address;
+
+#define DRVNAME "w83627hf"
+enum chips { w83627hf, w83627thf, w83697hf, w83637hf, w83687thf };
+
 static u16 force_addr;
 module_param(force_addr, ushort, 0);
 MODULE_PARM_DESC(force_addr,
@@ -60,12 +67,6 @@ module_param(force_i2c, byte, 0);
 MODULE_PARM_DESC(force_i2c,
                 "Initialize the i2c address of the sensors");
 
-/* The actual ISA address is read from Super-I/O configuration space */
-static unsigned short address;
-
-/* Insmod parameters */
-enum chips { any_chip, w83627hf, w83627thf, w83697hf, w83637hf, w83687thf };
-
 static int reset;
 module_param(reset, bool, 0);
 MODULE_PARM_DESC(reset, "Set to one to reset chip on load");
@@ -298,9 +299,6 @@ struct w83627hf_data {
        char valid;             /* !=0 if following fields are valid */
        unsigned long last_updated;     /* In jiffies */
 
-       struct i2c_client *lm75;        /* for secondary I2C addresses */
-       /* pointer to array of 2 subclients */
-
        u8 in[9];               /* Register value */
        u8 in_max[9];           /* Register value */
        u8 in_min[9];           /* Register value */
@@ -339,7 +337,7 @@ static void w83627hf_init_client(struct i2c_client *client);
 static struct i2c_driver w83627hf_driver = {
        .driver = {
                .owner  = THIS_MODULE,
-               .name   = "w83627hf",
+               .name   = DRVNAME,
        },
        .attach_adapter = w83627hf_detect,
        .detach_client  = w83627hf_detach_client,
@@ -931,6 +929,7 @@ sysfs_sensor(3);
 
 static int __init w83627hf_find(int sioaddr, unsigned short *addr)
 {
+       int err = -ENODEV;
        u16 val;
 
        REG = sioaddr;
@@ -943,21 +942,37 @@ static int __init w83627hf_find(int sioaddr, unsigned short *addr)
           val != W697_DEVID &&
           val != W637_DEVID &&
           val != W687THF_DEVID) {
-               superio_exit();
-               return -ENODEV;
+               goto exit;
        }
 
        superio_select(W83627HF_LD_HWM);
+       force_addr &= WINB_ALIGNMENT;
+       if (force_addr) {
+               printk(KERN_WARNING DRVNAME ": Forcing address 0x%x\n",
+                      force_addr);
+               superio_outb(WINB_BASE_REG, force_addr >> 8);
+               superio_outb(WINB_BASE_REG + 1, force_addr & 0xff);
+       }
        val = (superio_inb(WINB_BASE_REG) << 8) |
               superio_inb(WINB_BASE_REG + 1);
        *addr = val & WINB_ALIGNMENT;
-       if (*addr == 0 && force_addr == 0) {
-               superio_exit();
-               return -ENODEV;
+       if (*addr == 0) {
+               printk(KERN_WARNING DRVNAME ": Base address not set, "
+                      "skipping\n");
+               goto exit;
+       }
+
+       val = superio_inb(WINB_ACT_REG);
+       if (!(val & 0x01)) {
+               printk(KERN_WARNING DRVNAME ": Enabling HWM logical device\n");
+               superio_outb(WINB_ACT_REG, val | 0x01);
        }
 
+       err = 0;
+
+ exit:
        superio_exit();
-       return 0;
+       return err;
 }
 
 static struct attribute *w83627hf_attributes[] = {
@@ -1047,24 +1062,12 @@ static int w83627hf_detect(struct i2c_adapter *adapter)
        int err = 0;
        const char *client_name = "";
 
-       if(force_addr)
-               address = force_addr & WINB_ALIGNMENT;
-
        if (!request_region(address + WINB_REGION_OFFSET, WINB_REGION_SIZE,
                            w83627hf_driver.driver.name)) {
                err = -EBUSY;
                goto ERROR0;
        }
 
-       if(force_addr) {
-               printk("w83627hf.o: forcing ISA address 0x%04X\n", address);
-               superio_enter();
-               superio_select(W83627HF_LD_HWM);
-               superio_outb(WINB_BASE_REG, address >> 8);
-               superio_outb(WINB_BASE_REG+1, address & 0xff);
-               superio_exit();
-       }
-
        superio_enter();
        val= superio_inb(DEVID);
        if(val == W627_DEVID)
@@ -1082,10 +1085,6 @@ static int w83627hf_detect(struct i2c_adapter *adapter)
                         "Unsupported chip (dev_id=0x%02X).\n", val);
                goto ERROR1;
        }
-
-       superio_select(W83627HF_LD_HWM);
-       if((val = 0x01 & superio_inb(WINB_ACT_REG)) == 0)
-               superio_outb(WINB_ACT_REG, 1);
        superio_exit();
 
        /* OK. For now, we presume we have a valid client. We now create the
@@ -1128,8 +1127,6 @@ static int w83627hf_detect(struct i2c_adapter *adapter)
        if ((err = i2c_attach_client(new_client)))
                goto ERROR2;
 
-       data->lm75 = NULL;
-
        /* Initialize the chip */
        w83627hf_init_client(new_client);
 
@@ -1374,7 +1371,7 @@ static void w83627hf_init_client(struct i2c_client *client)
 {
        struct w83627hf_data *data = i2c_get_clientdata(client);
        int i;
-       int type = data->type;
+       enum chips type = data->type;
        u8 tmp;
 
        if (reset) {
@@ -1407,19 +1404,18 @@ static void w83627hf_init_client(struct i2c_client *client)
        w83627hf_write_value(client, W83781D_REG_I2C_ADDR, force_i2c);
 
        /* Read VID only once */
-       if (w83627hf == data->type || w83637hf == data->type) {
+       if (type == w83627hf || type == w83637hf) {
                int lo = w83627hf_read_value(client, W83781D_REG_VID_FANDIV);
                int hi = w83627hf_read_value(client, W83781D_REG_CHIPID);
                data->vid = (lo & 0x0f) | ((hi & 0x01) << 4);
-       } else if (w83627thf == data->type) {
+       } else if (type == w83627thf) {
                data->vid = w83627thf_read_gpio5(client);
-       } else if (w83687thf == data->type) {
+       } else if (type == w83687thf) {
                data->vid = w83687thf_read_vid(client);
        }
 
        /* Read VRM & OVT Config only once */
-       if (w83627thf == data->type || w83637hf == data->type
-        || w83687thf == data->type) {
+       if (type == w83627thf || type == w83637hf || type == w83687thf) {
                data->vrm_ovt = 
                        w83627hf_read_value(client, W83627THF_REG_VRM_OVT_CFG);
        }