Ktest: Use dodie for critical falures

Users should get emails when the script dies because of a critical failure.
Critical failures are defined as any errors that could abnormally terminate
the script.

In order to add email support, this patch converts all die() to dodie() except:
 * when '-v' is used as an option to get the version of the script.
 * in Sig-Int handeler because it's not a fatal error to cancel the script.
 * errors happen during parsing config

Link: http://lkml.kernel.org/r/1522094884-22718-4-git-send-email-tianyang.chen@oracle.com
Suggested-by: Dhaval Giani <dhaval.giani@oracle.com>
Signed-off-by: Tim Tianyang Chen <tianyang.chen@oracle.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>

diff --git a/tools/testing/ktest/ktest.pl b/tools/testing/ktest/ktest.pl
index 1646af5..30a4c05 100755 (executable)
--- a/tools/testing/ktest/ktest.pl
+++ b/tools/testing/ktest/ktest.pl
@@ -1506,7 +1506,7 @@ sub exec_console {
     close($pts);
 
     exec $console or
-       die "Can't open console $console";
+       dodie "Can't open console $console";
 }
 
 sub open_console {
@@ -1657,7 +1657,7 @@ sub save_logs {
 
        if (!-d $dir) {
            mkpath($dir) or
-               die "can't create $dir";
+               dodie "can't create $dir";
        }
 
        my %files = (
@@ -1670,7 +1670,7 @@ sub save_logs {
        while (my ($name, $source) = each(%files)) {
                if (-f "$source") {
                        cp "$source", "$dir/$name" or
-                               die "failed to copy $source";
+                               dodie "failed to copy $source";
                }
        }
 
@@ -1852,7 +1852,7 @@ sub get_grub2_index {
     $ssh_grub =~ s,\$SSH_COMMAND,cat $grub_file,g;
 
     open(IN, "$ssh_grub |")
-       or die "unable to get $grub_file";
+       or dodie "unable to get $grub_file";
 
     my $found = 0;
 
@@ -1867,7 +1867,7 @@ sub get_grub2_index {
     }
     close(IN);
 
-    die "Could not find '$grub_menu' in $grub_file on $machine"
+    dodie "Could not find '$grub_menu' in $grub_file on $machine"
        if (!$found);
     doprint "$grub_number\n";
     $last_grub_menu = $grub_menu;
@@ -1895,7 +1895,7 @@ sub get_grub_index {
     $ssh_grub =~ s,\$SSH_COMMAND,cat /boot/grub/menu.lst,g;
 
     open(IN, "$ssh_grub |")
-       or die "unable to get menu.lst";
+       or dodie "unable to get menu.lst";
 
     my $found = 0;
 
@@ -1910,7 +1910,7 @@ sub get_grub_index {
     }
     close(IN);
 
-    die "Could not find '$grub_menu' in /boot/grub/menu on $machine"
+    dodie "Could not find '$grub_menu' in /boot/grub/menu on $machine"
        if (!$found);
     doprint "$grub_number\n";
     $last_grub_menu = $grub_menu;
@@ -2023,7 +2023,7 @@ sub monitor {
     my $full_line = "";
 
     open(DMESG, "> $dmesg") or
-       die "unable to write to $dmesg";
+       dodie "unable to write to $dmesg";
 
     reboot_to;
 
@@ -2902,7 +2902,7 @@ sub run_bisect {
 sub update_bisect_replay {
     my $tmp_log = "$tmpdir/ktest_bisect_log";
     run_command "git bisect log > $tmp_log" or
-       die "can't create bisect log";
+       dodie "can't create bisect log";
     return $tmp_log;
 }
 
@@ -2911,9 +2911,9 @@ sub bisect {
 
     my $result;
 
-    die "BISECT_GOOD[$i] not defined\n"        if (!defined($bisect_good));
-    die "BISECT_BAD[$i] not defined\n" if (!defined($bisect_bad));
-    die "BISECT_TYPE[$i] not defined\n"        if (!defined($bisect_type));
+    dodie "BISECT_GOOD[$i] not defined\n"      if (!defined($bisect_good));
+    dodie "BISECT_BAD[$i] not defined\n"       if (!defined($bisect_bad));
+    dodie "BISECT_TYPE[$i] not defined\n"      if (!defined($bisect_type));
 
     my $good = $bisect_good;
     my $bad = $bisect_bad;
@@ -2976,7 +2976,7 @@ sub bisect {
        if ($check ne "good") {
            doprint "TESTING BISECT BAD [$bad]\n";
            run_command "git checkout $bad" or
-               die "Failed to checkout $bad";
+               dodie "Failed to checkout $bad";
 
            $result = run_bisect $type;
 
@@ -2988,7 +2988,7 @@ sub bisect {
        if ($check ne "bad") {
            doprint "TESTING BISECT GOOD [$good]\n";
            run_command "git checkout $good" or
-               die "Failed to checkout $good";
+               dodie "Failed to checkout $good";
 
            $result = run_bisect $type;
 
@@ -2999,7 +2999,7 @@ sub bisect {
 
        # checkout where we started
        run_command "git checkout $head" or
-           die "Failed to checkout $head";
+           dodie "Failed to checkout $head";
     }
 
     run_command "git bisect start$start_files" or
@@ -3316,9 +3316,9 @@ sub patchcheck_reboot {
 sub patchcheck {
     my ($i) = @_;
 
-    die "PATCHCHECK_START[$i] not defined\n"
+    dodie "PATCHCHECK_START[$i] not defined\n"
        if (!defined($patchcheck_start));
-    die "PATCHCHECK_TYPE[$i] not defined\n"
+    dodie "PATCHCHECK_TYPE[$i] not defined\n"
        if (!defined($patchcheck_type));
 
     my $start = $patchcheck_start;
@@ -3332,7 +3332,7 @@ sub patchcheck {
     if (defined($patchcheck_end)) {
        $end = $patchcheck_end;
     } elsif ($cherry) {
-       die "PATCHCHECK_END must be defined with PATCHCHECK_CHERRY\n";
+       dodie "PATCHCHECK_END must be defined with PATCHCHECK_CHERRY\n";
     }
 
     # Get the true sha1's since we can use things like HEAD~3
@@ -3396,7 +3396,7 @@ sub patchcheck {
        doprint "\nProcessing commit \"$item\"\n\n";
 
        run_command "git checkout $sha1" or
-           die "Failed to checkout $sha1";
+           dodie "Failed to checkout $sha1";
 
        # only clean on the first and last patch
        if ($item eq $list[0] ||
@@ -3487,7 +3487,7 @@ sub read_kconfig {
     }
 
     open(KIN, "$kconfig")
-       or die "Can't open $kconfig";
+       or dodie "Can't open $kconfig";
     while (<KIN>) {
        chomp;
 
@@ -3648,7 +3648,7 @@ sub get_depends {
 
            $dep =~ s/^[^$valid]*[$valid]+//;
        } else {
-           die "this should never happen";
+           dodie "this should never happen";
        }
     }
 
@@ -3909,7 +3909,7 @@ sub make_min_config {
            # update new ignore configs
            if (defined($ignore_config)) {
                open (OUT, ">$temp_config")
-                   or die "Can't write to $temp_config";
+                   or dodie "Can't write to $temp_config";
                foreach my $config (keys %save_configs) {
                    print OUT "$save_configs{$config}\n";
                }
@@ -3937,7 +3937,7 @@ sub make_min_config {
 
            # Save off all the current mandatory configs
            open (OUT, ">$temp_config")
-               or die "Can't write to $temp_config";
+               or dodie "Can't write to $temp_config";
            foreach my $config (keys %keep_configs) {
                print OUT "$keep_configs{$config}\n";
            }
@@ -4177,11 +4177,11 @@ for (my $i = 1; $i <= $opt{"NUM_TESTS"}; $i++) {
     $outputdir = set_test_option("OUTPUT_DIR", $i);
     $builddir = set_test_option("BUILD_DIR", $i);
 
-    chdir $builddir || die "can't change directory to $builddir";
+    chdir $builddir || dodie "can't change directory to $builddir";
 
     if (!-d $outputdir) {
        mkpath($outputdir) or
-           die "can't create $outputdir";
+           dodie "can't create $outputdir";
     }
 
     $make = "$makecmd O=$outputdir";
@@ -4218,7 +4218,7 @@ for (my $i = 1; $i <= $opt{"NUM_TESTS"}; $i++) {
 
     if (!-d $tmpdir) {
        mkpath($tmpdir) or
-           die "can't create $tmpdir";
+           dodie "can't create $tmpdir";
     }
 
     $ENV{"SSH_USER"} = $ssh_user;
@@ -4291,7 +4291,7 @@ for (my $i = 1; $i <= $opt{"NUM_TESTS"}; $i++) {
 
     if (defined($checkout)) {
        run_command "git checkout $checkout" or
-           die "failed to checkout $checkout";
+           dodie "failed to checkout $checkout";
     }
 
     $no_reboot = 0;