[PATCH] PCMCIA: fix drivers broken by recent cleanup
authorDaniel Ritz <daniel.ritz-ml@swissonline.ch>
Fri, 8 Dec 2006 17:07:01 +0000 (18:07 +0100)
committerLinus Torvalds <torvalds@woody.osdl.org>
Fri, 12 Jan 2007 02:24:39 +0000 (18:24 -0800)
Setting .ConfigBase and .Present is now done at the pcmcia core.

The driver cleanup missed a few places where the driver did set .Present
to PRESENT_OPTION and later to the values from the CIS.  Setting to
PRESENT_OPTION now overrides the values from the CIS.  So just remove
those lines.

Signed-off-by: Daniel Ritz <daniel.ritz@gmx.ch>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
drivers/net/pcmcia/3c574_cs.c
drivers/net/pcmcia/3c589_cs.c
drivers/net/pcmcia/com20020_cs.c
drivers/net/pcmcia/xirc2ps_cs.c
drivers/net/wireless/netwave_cs.c
drivers/net/wireless/ray_cs.c
drivers/net/wireless/wl3501_cs.c
drivers/scsi/pcmcia/nsp_cs.c
drivers/scsi/pcmcia/sym53c500_cs.c

index 794cc61..448bf4a 100644 (file)
@@ -281,7 +281,6 @@ static int tc574_probe(struct pcmcia_device *link)
        link->conf.Attributes = CONF_ENABLE_IRQ;
        link->conf.IntType = INT_MEMORY_AND_IO;
        link->conf.ConfigIndex = 1;
-       link->conf.Present = PRESENT_OPTION;
 
        /* The EL3-specific entries in the device structure. */
        dev->hard_start_xmit = &el3_start_xmit;
index 1e73ff7..342f406 100644 (file)
@@ -195,7 +195,6 @@ static int tc589_probe(struct pcmcia_device *link)
     link->conf.Attributes = CONF_ENABLE_IRQ;
     link->conf.IntType = INT_MEMORY_AND_IO;
     link->conf.ConfigIndex = 1;
-    link->conf.Present = PRESENT_OPTION;
 
     /* The EL3-specific entries in the device structure. */
     SET_MODULE_OWNER(dev);
index 91f65e9..0d1c7a4 100644 (file)
@@ -173,7 +173,6 @@ static int com20020_probe(struct pcmcia_device *p_dev)
     p_dev->irq.IRQInfo1 = IRQ_LEVEL_ID;
     p_dev->conf.Attributes = CONF_ENABLE_IRQ;
     p_dev->conf.IntType = INT_MEMORY_AND_IO;
-    p_dev->conf.Present = PRESENT_OPTION;
 
     p_dev->irq.Instance = info->dev = dev;
     p_dev->priv = info;
index 8478dca..5879e7c 100644 (file)
@@ -576,7 +576,6 @@ xirc2ps_probe(struct pcmcia_device *link)
     link->conf.Attributes = CONF_ENABLE_IRQ;
     link->conf.IntType = INT_MEMORY_AND_IO;
     link->conf.ConfigIndex = 1;
-    link->conf.Present = PRESENT_OPTION;
     link->irq.Handler = xirc2ps_interrupt;
     link->irq.Instance = dev;
 
index 644b474..a009ab5 100644 (file)
@@ -406,7 +406,6 @@ static int netwave_probe(struct pcmcia_device *link)
     link->conf.Attributes = CONF_ENABLE_IRQ;
     link->conf.IntType = INT_MEMORY_AND_IO;
     link->conf.ConfigIndex = 1;
-    link->conf.Present = PRESENT_OPTION;
 
     /* Netwave private struct init. link/dev/node already taken care of,
      * other stuff zero'd - Jean II */
index 88e10c9..47b2ccb 100644 (file)
@@ -331,7 +331,6 @@ static int ray_probe(struct pcmcia_device *p_dev)
     p_dev->conf.Attributes = CONF_ENABLE_IRQ;
     p_dev->conf.IntType = INT_MEMORY_AND_IO;
     p_dev->conf.ConfigIndex = 1;
-    p_dev->conf.Present = PRESENT_OPTION;
 
     p_dev->priv = dev;
     p_dev->irq.Instance = dev;
index 583e0d6..c250f08 100644 (file)
@@ -1928,7 +1928,6 @@ static int wl3501_probe(struct pcmcia_device *p_dev)
        p_dev->conf.Attributes  = CONF_ENABLE_IRQ;
        p_dev->conf.IntType     = INT_MEMORY_AND_IO;
        p_dev->conf.ConfigIndex = 1;
-       p_dev->conf.Present     = PRESENT_OPTION;
 
        dev = alloc_etherdev(sizeof(struct wl3501_card));
        if (!dev)
index d72df5d..e16fe36 100644 (file)
@@ -1629,7 +1629,6 @@ static int nsp_cs_probe(struct pcmcia_device *link)
        /* General socket configuration */
        link->conf.Attributes    = CONF_ENABLE_IRQ;
        link->conf.IntType       = INT_MEMORY_AND_IO;
-       link->conf.Present       = PRESENT_OPTION;
 
        ret = nsp_cs_config(link);
 
index fb7acea..9fb0ea5 100644 (file)
@@ -895,7 +895,6 @@ SYM53C500_probe(struct pcmcia_device *link)
        link->irq.IRQInfo1 = IRQ_LEVEL_ID;
        link->conf.Attributes = CONF_ENABLE_IRQ;
        link->conf.IntType = INT_MEMORY_AND_IO;
-       link->conf.Present = PRESENT_OPTION;
 
        return SYM53C500_config(link);
 } /* SYM53C500_attach */