- model : Model of the device. Can be "TSEC", "eTSEC", or "FEC"
- compatible : Should be "gianfar"
- reg : Offset and length of the register set for the device
- - address : List of bytes representing the ethernet address of
+ - mac-address : List of bytes representing the ethernet address of
this controller
- interrupts : <a b> where a is the interrupt number and b is a
field that represents an encoding of the sense and level
model = "TSEC";
compatible = "gianfar";
reg = <24000 1000>;
- address = [ 00 E0 0C 00 73 00 ];
+ mac-address = [ 00 E0 0C 00 73 00 ];
interrupts = <d 3 e 3 12 3>;
interrupt-parent = <40000>;
phy-handle = <2452000>
model = "TSEC";
compatible = "gianfar";
reg = <24000 1000>;
- address = [ 00 E0 0C 00 73 00 ];
+ mac-address = [ 00 E0 0C 00 73 00 ];
interrupts = <d 3 e 3 12 3>;
interrupt-parent = <40000>;
phy-handle = <2452000>;
model = "TSEC";
compatible = "gianfar";
reg = <25000 1000>;
- address = [ 00 E0 0C 00 73 01 ];
+ mac-address = [ 00 E0 0C 00 73 01 ];
interrupts = <13 3 14 3 18 3>;
interrupt-parent = <40000>;
phy-handle = <2452001>;
model = "FEC";
compatible = "gianfar";
reg = <26000 1000>;
- address = [ 00 E0 0C 00 73 02 ];
+ mac-address = [ 00 E0 0C 00 73 02 ];
interrupts = <19 3>;
interrupt-parent = <40000>;
phy-handle = <2452002>;
bool
config PCI
- bool "PCI support" if 40x || CPM2 || PPC_83xx || PPC_85xx || PPC_MPC52xx || (EMBEDDED && PPC_ISERIES) \
- || MPC7448HPC2
- default y if !40x && !CPM2 && !8xx && !APUS && !PPC_83xx && !PPC_85xx && !PPC_86xx
+ bool "PCI support" if 40x || CPM2 || PPC_83xx || PPC_85xx || PPC_86xx \
+ || PPC_MPC52xx || (EMBEDDED && PPC_ISERIES) || MPC7448HPC2
+ default y if !40x && !CPM2 && !8xx && !APUS && !PPC_83xx \
+ && !PPC_85xx && !PPC_86xx
default PCI_PERMEDIA if !4xx && !CPM2 && !8xx && APUS
default PCI_QSPAN if !4xx && !CPM2 && 8xx
help
--- /dev/null
+/*
+ * MPC8540 ADS Device Tree Source
+ *
+ * Copyright 2006 Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+
+/ {
+ model = "MPC8540ADS";
+ compatible = "MPC85xxADS";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ linux,phandle = <100>;
+
+ cpus {
+ #cpus = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ linux,phandle = <200>;
+
+ PowerPC,8540@0 {
+ device_type = "cpu";
+ reg = <0>;
+ d-cache-line-size = <20>; // 32 bytes
+ i-cache-line-size = <20>; // 32 bytes
+ d-cache-size = <8000>; // L1, 32K
+ i-cache-size = <8000>; // L1, 32K
+ timebase-frequency = <0>; // 33 MHz, from uboot
+ bus-frequency = <0>; // 166 MHz
+ clock-frequency = <0>; // 825 MHz, from uboot
+ 32-bit;
+ linux,phandle = <201>;
+ };
+ };
+
+ memory {
+ device_type = "memory";
+ linux,phandle = <300>;
+ reg = <00000000 08000000>; // 128M at 0x0
+ };
+
+ soc8540@e0000000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ #interrupt-cells = <2>;
+ device_type = "soc";
+ ranges = <0 e0000000 00100000>;
+ reg = <e0000000 00100000>; // CCSRBAR 1M
+ bus-frequency = <0>;
+
+ i2c@3000 {
+ device_type = "i2c";
+ compatible = "fsl-i2c";
+ reg = <3000 100>;
+ interrupts = <1b 2>;
+ interrupt-parent = <40000>;
+ dfsrr;
+ };
+
+ mdio@24520 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ device_type = "mdio";
+ compatible = "gianfar";
+ reg = <24520 20>;
+ linux,phandle = <24520>;
+ ethernet-phy@0 {
+ linux,phandle = <2452000>;
+ interrupt-parent = <40000>;
+ interrupts = <35 1>;
+ reg = <0>;
+ device_type = "ethernet-phy";
+ };
+ ethernet-phy@1 {
+ linux,phandle = <2452001>;
+ interrupt-parent = <40000>;
+ interrupts = <35 1>;
+ reg = <1>;
+ device_type = "ethernet-phy";
+ };
+ ethernet-phy@3 {
+ linux,phandle = <2452003>;
+ interrupt-parent = <40000>;
+ interrupts = <37 1>;
+ reg = <3>;
+ device_type = "ethernet-phy";
+ };
+ };
+
+ ethernet@24000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ device_type = "network";
+ model = "TSEC";
+ compatible = "gianfar";
+ reg = <24000 1000>;
+ address = [ 00 E0 0C 00 73 00 ];
+ local-mac-address = [ 00 E0 0C 00 73 00 ];
+ interrupts = <d 2 e 2 12 2>;
+ interrupt-parent = <40000>;
+ phy-handle = <2452000>;
+ };
+
+ ethernet@25000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ device_type = "network";
+ model = "TSEC";
+ compatible = "gianfar";
+ reg = <25000 1000>;
+ address = [ 00 E0 0C 00 73 01 ];
+ local-mac-address = [ 00 E0 0C 00 73 01 ];
+ interrupts = <13 2 14 2 18 2>;
+ interrupt-parent = <40000>;
+ phy-handle = <2452001>;
+ };
+
+ ethernet@26000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ device_type = "network";
+ model = "FEC";
+ compatible = "gianfar";
+ reg = <26000 1000>;
+ address = [ 00 E0 0C 00 73 02 ];
+ local-mac-address = [ 00 E0 0C 00 73 02 ];
+ interrupts = <19 2>;
+ interrupt-parent = <40000>;
+ phy-handle = <2452003>;
+ };
+
+ serial@4500 {
+ device_type = "serial";
+ compatible = "ns16550";
+ reg = <4500 100>; // reg base, size
+ clock-frequency = <0>; // should we fill in in uboot?
+ interrupts = <1a 2>;
+ interrupt-parent = <40000>;
+ };
+
+ serial@4600 {
+ device_type = "serial";
+ compatible = "ns16550";
+ reg = <4600 100>; // reg base, size
+ clock-frequency = <0>; // should we fill in in uboot?
+ interrupts = <1a 2>;
+ interrupt-parent = <40000>;
+ };
+ pci@8000 {
+ linux,phandle = <8000>;
+ interrupt-map-mask = <f800 0 0 7>;
+ interrupt-map = <
+
+ /* IDSEL 0x02 */
+ 1000 0 0 1 40000 31 1
+ 1000 0 0 2 40000 32 1
+ 1000 0 0 3 40000 33 1
+ 1000 0 0 4 40000 34 1
+
+ /* IDSEL 0x03 */
+ 1800 0 0 1 40000 34 1
+ 1800 0 0 2 40000 31 1
+ 1800 0 0 3 40000 32 1
+ 1800 0 0 4 40000 33 1
+
+ /* IDSEL 0x04 */
+ 2000 0 0 1 40000 33 1
+ 2000 0 0 2 40000 34 1
+ 2000 0 0 3 40000 31 1
+ 2000 0 0 4 40000 32 1
+
+ /* IDSEL 0x05 */
+ 2800 0 0 1 40000 32 1
+ 2800 0 0 2 40000 33 1
+ 2800 0 0 3 40000 34 1
+ 2800 0 0 4 40000 31 1
+
+ /* IDSEL 0x0c */
+ 6000 0 0 1 40000 31 1
+ 6000 0 0 2 40000 32 1
+ 6000 0 0 3 40000 33 1
+ 6000 0 0 4 40000 34 1
+
+ /* IDSEL 0x0d */
+ 6800 0 0 1 40000 34 1
+ 6800 0 0 2 40000 31 1
+ 6800 0 0 3 40000 32 1
+ 6800 0 0 4 40000 33 1
+
+ /* IDSEL 0x0e */
+ 7000 0 0 1 40000 33 1
+ 7000 0 0 2 40000 34 1
+ 7000 0 0 3 40000 31 1
+ 7000 0 0 4 40000 32 1
+
+ /* IDSEL 0x0f */
+ 7800 0 0 1 40000 32 1
+ 7800 0 0 2 40000 33 1
+ 7800 0 0 3 40000 34 1
+ 7800 0 0 4 40000 31 1
+
+ /* IDSEL 0x12 */
+ 9000 0 0 1 40000 31 1
+ 9000 0 0 2 40000 32 1
+ 9000 0 0 3 40000 33 1
+ 9000 0 0 4 40000 34 1
+
+ /* IDSEL 0x13 */
+ 9800 0 0 1 40000 34 1
+ 9800 0 0 2 40000 31 1
+ 9800 0 0 3 40000 32 1
+ 9800 0 0 4 40000 33 1
+
+ /* IDSEL 0x14 */
+ a000 0 0 1 40000 33 1
+ a000 0 0 2 40000 34 1
+ a000 0 0 3 40000 31 1
+ a000 0 0 4 40000 32 1
+
+ /* IDSEL 0x15 */
+ a800 0 0 1 40000 32 1
+ a800 0 0 2 40000 33 1
+ a800 0 0 3 40000 34 1
+ a800 0 0 4 40000 31 1>;
+ interrupt-parent = <40000>;
+ interrupts = <08 2>;
+ bus-range = <0 0>;
+ ranges = <02000000 0 80000000 80000000 0 20000000
+ 01000000 0 00000000 e2000000 0 00100000>;
+ clock-frequency = <3f940aa>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ reg = <8000 1000>;
+ compatible = "85xx";
+ device_type = "pci";
+ };
+
+ pic@40000 {
+ linux,phandle = <40000>;
+ clock-frequency = <0>;
+ interrupt-controller;
+ #address-cells = <0>;
+ #interrupt-cells = <2>;
+ reg = <40000 40000>;
+ built-in;
+ compatible = "chrp,open-pic";
+ device_type = "open-pic";
+ big-endian;
+ };
+ };
+};
--- /dev/null
+/*
+ * MPC8541 CDS Device Tree Source
+ *
+ * Copyright 2006 Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+
+/ {
+ model = "MPC8541CDS";
+ compatible = "MPC85xxCDS";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ linux,phandle = <100>;
+
+ cpus {
+ #cpus = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ linux,phandle = <200>;
+
+ PowerPC,8541@0 {
+ device_type = "cpu";
+ reg = <0>;
+ d-cache-line-size = <20>; // 32 bytes
+ i-cache-line-size = <20>; // 32 bytes
+ d-cache-size = <8000>; // L1, 32K
+ i-cache-size = <8000>; // L1, 32K
+ timebase-frequency = <0>; // 33 MHz, from uboot
+ bus-frequency = <0>; // 166 MHz
+ clock-frequency = <0>; // 825 MHz, from uboot
+ 32-bit;
+ linux,phandle = <201>;
+ };
+ };
+
+ memory {
+ device_type = "memory";
+ linux,phandle = <300>;
+ reg = <00000000 08000000>; // 128M at 0x0
+ };
+
+ soc8541@e0000000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ #interrupt-cells = <2>;
+ device_type = "soc";
+ ranges = <0 e0000000 00100000>;
+ reg = <e0000000 00100000>; // CCSRBAR 1M
+ bus-frequency = <0>;
+
+ i2c@3000 {
+ device_type = "i2c";
+ compatible = "fsl-i2c";
+ reg = <3000 100>;
+ interrupts = <1b 2>;
+ interrupt-parent = <40000>;
+ dfsrr;
+ };
+
+ mdio@24520 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ device_type = "mdio";
+ compatible = "gianfar";
+ reg = <24520 20>;
+ linux,phandle = <24520>;
+ ethernet-phy@0 {
+ linux,phandle = <2452000>;
+ interrupt-parent = <40000>;
+ interrupts = <35 0>;
+ reg = <0>;
+ device_type = "ethernet-phy";
+ };
+ ethernet-phy@1 {
+ linux,phandle = <2452001>;
+ interrupt-parent = <40000>;
+ interrupts = <35 0>;
+ reg = <1>;
+ device_type = "ethernet-phy";
+ };
+ };
+
+ ethernet@24000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ device_type = "network";
+ model = "TSEC";
+ compatible = "gianfar";
+ reg = <24000 1000>;
+ local-mac-address = [ 00 E0 0C 00 73 00 ];
+ interrupts = <d 2 e 2 12 2>;
+ interrupt-parent = <40000>;
+ phy-handle = <2452000>;
+ };
+
+ ethernet@25000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ device_type = "network";
+ model = "TSEC";
+ compatible = "gianfar";
+ reg = <25000 1000>;
+ local-mac-address = [ 00 E0 0C 00 73 01 ];
+ interrupts = <13 2 14 2 18 2>;
+ interrupt-parent = <40000>;
+ phy-handle = <2452001>;
+ };
+
+ serial@4500 {
+ device_type = "serial";
+ compatible = "ns16550";
+ reg = <4500 100>; // reg base, size
+ clock-frequency = <0>; // should we fill in in uboot?
+ interrupts = <1a 2>;
+ interrupt-parent = <40000>;
+ };
+
+ serial@4600 {
+ device_type = "serial";
+ compatible = "ns16550";
+ reg = <4600 100>; // reg base, size
+ clock-frequency = <0>; // should we fill in in uboot?
+ interrupts = <1a 2>;
+ interrupt-parent = <40000>;
+ };
+
+ pci@8000 {
+ linux,phandle = <8000>;
+ interrupt-map-mask = <1f800 0 0 7>;
+ interrupt-map = <
+
+ /* IDSEL 0x10 */
+ 08000 0 0 1 40000 30 1
+ 08000 0 0 2 40000 31 1
+ 08000 0 0 3 40000 32 1
+ 08000 0 0 4 40000 33 1
+
+ /* IDSEL 0x11 */
+ 08800 0 0 1 40000 30 1
+ 08800 0 0 2 40000 31 1
+ 08800 0 0 3 40000 32 1
+ 08800 0 0 4 40000 33 1
+
+ /* IDSEL 0x12 (Slot 1) */
+ 09000 0 0 1 40000 30 1
+ 09000 0 0 2 40000 31 1
+ 09000 0 0 3 40000 32 1
+ 09000 0 0 4 40000 33 1
+
+ /* IDSEL 0x13 (Slot 2) */
+ 09800 0 0 1 40000 31 1
+ 09800 0 0 2 40000 32 1
+ 09800 0 0 3 40000 33 1
+ 09800 0 0 4 40000 30 1
+
+ /* IDSEL 0x14 (Slot 3) */
+ 0a000 0 0 1 40000 32 1
+ 0a000 0 0 2 40000 33 1
+ 0a000 0 0 3 40000 30 1
+ 0a000 0 0 4 40000 31 1
+
+ /* IDSEL 0x15 (Slot 4) */
+ 0a800 0 0 1 40000 33 1
+ 0a800 0 0 2 40000 30 1
+ 0a800 0 0 3 40000 31 1
+ 0a800 0 0 4 40000 32 1
+
+ /* Bus 1 (Tundra Bridge) */
+ /* IDSEL 0x12 (ISA bridge) */
+ 19000 0 0 1 40000 30 1
+ 19000 0 0 2 40000 31 1
+ 19000 0 0 3 40000 32 1
+ 19000 0 0 4 40000 33 1>;
+ interrupt-parent = <40000>;
+ interrupts = <08 2>;
+ bus-range = <0 0>;
+ ranges = <02000000 0 80000000 80000000 0 20000000
+ 01000000 0 00000000 e2000000 0 00100000>;
+ clock-frequency = <3f940aa>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ reg = <8000 1000>;
+ compatible = "85xx";
+ device_type = "pci";
+
+ i8259@19000 {
+ clock-frequency = <0>;
+ interrupt-controller;
+ device_type = "interrupt-controller";
+ reg = <19000 0 0 0 1>;
+ #address-cells = <0>;
+ #interrupt-cells = <2>;
+ built-in;
+ compatible = "chrp,iic";
+ big-endian;
+ interrupts = <1>;
+ interrupt-parent = <8000>;
+ };
+ };
+
+ pci@9000 {
+ linux,phandle = <9000>;
+ interrupt-map-mask = <f800 0 0 7>;
+ interrupt-map = <
+
+ /* IDSEL 0x15 */
+ a800 0 0 1 40000 3b 1
+ a800 0 0 2 40000 3b 1
+ a800 0 0 3 40000 3b 1
+ a800 0 0 4 40000 3b 1>;
+ interrupt-parent = <40000>;
+ interrupts = <09 2>;
+ bus-range = <0 0>;
+ ranges = <02000000 0 a0000000 a0000000 0 20000000
+ 01000000 0 00000000 e3000000 0 00100000>;
+ clock-frequency = <3f940aa>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ reg = <9000 1000>;
+ compatible = "85xx";
+ device_type = "pci";
+ };
+
+ pic@40000 {
+ linux,phandle = <40000>;
+ clock-frequency = <0>;
+ interrupt-controller;
+ #address-cells = <0>;
+ #interrupt-cells = <2>;
+ reg = <40000 40000>;
+ built-in;
+ compatible = "chrp,open-pic";
+ device_type = "open-pic";
+ big-endian;
+ };
+ };
+};
--- /dev/null
+/*
+ * MPC8555 CDS Device Tree Source
+ *
+ * Copyright 2006 Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+
+/ {
+ model = "MPC8548CDS";
+ compatible = "MPC85xxCDS";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ linux,phandle = <100>;
+
+ cpus {
+ #cpus = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ linux,phandle = <200>;
+
+ PowerPC,8548@0 {
+ device_type = "cpu";
+ reg = <0>;
+ d-cache-line-size = <20>; // 32 bytes
+ i-cache-line-size = <20>; // 32 bytes
+ d-cache-size = <8000>; // L1, 32K
+ i-cache-size = <8000>; // L1, 32K
+ timebase-frequency = <0>; // 33 MHz, from uboot
+ bus-frequency = <0>; // 166 MHz
+ clock-frequency = <0>; // 825 MHz, from uboot
+ 32-bit;
+ linux,phandle = <201>;
+ };
+ };
+
+ memory {
+ device_type = "memory";
+ linux,phandle = <300>;
+ reg = <00000000 08000000>; // 128M at 0x0
+ };
+
+ soc8548@e0000000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ #interrupt-cells = <2>;
+ device_type = "soc";
+ ranges = <0 e0000000 00100000>;
+ reg = <e0000000 00100000>; // CCSRBAR 1M
+ bus-frequency = <0>;
+
+ i2c@3000 {
+ device_type = "i2c";
+ compatible = "fsl-i2c";
+ reg = <3000 100>;
+ interrupts = <1b 2>;
+ interrupt-parent = <40000>;
+ dfsrr;
+ };
+
+ mdio@24520 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ device_type = "mdio";
+ compatible = "gianfar";
+ reg = <24520 20>;
+ linux,phandle = <24520>;
+ ethernet-phy@0 {
+ linux,phandle = <2452000>;
+ interrupt-parent = <40000>;
+ interrupts = <35 0>;
+ reg = <0>;
+ device_type = "ethernet-phy";
+ };
+ ethernet-phy@1 {
+ linux,phandle = <2452001>;
+ interrupt-parent = <40000>;
+ interrupts = <35 0>;
+ reg = <1>;
+ device_type = "ethernet-phy";
+ };
+
+ ethernet-phy@2 {
+ linux,phandle = <2452002>;
+ interrupt-parent = <40000>;
+ interrupts = <35 0>;
+ reg = <2>;
+ device_type = "ethernet-phy";
+ };
+ ethernet-phy@3 {
+ linux,phandle = <2452003>;
+ interrupt-parent = <40000>;
+ interrupts = <35 0>;
+ reg = <3>;
+ device_type = "ethernet-phy";
+ };
+ };
+
+ ethernet@24000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ device_type = "network";
+ model = "eTSEC";
+ compatible = "gianfar";
+ reg = <24000 1000>;
+ local-mac-address = [ 00 E0 0C 00 73 00 ];
+ interrupts = <d 2 e 2 12 2>;
+ interrupt-parent = <40000>;
+ phy-handle = <2452000>;
+ };
+
+ ethernet@25000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ device_type = "network";
+ model = "eTSEC";
+ compatible = "gianfar";
+ reg = <25000 1000>;
+ local-mac-address = [ 00 E0 0C 00 73 01 ];
+ interrupts = <13 2 14 2 18 2>;
+ interrupt-parent = <40000>;
+ phy-handle = <2452001>;
+ };
+
+ ethernet@26000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ device_type = "network";
+ model = "eTSEC";
+ compatible = "gianfar";
+ reg = <26000 1000>;
+ local-mac-address = [ 00 E0 0C 00 73 02 ];
+ interrupts = <f 2 10 2 11 2>;
+ interrupt-parent = <40000>;
+ phy-handle = <2452001>;
+ };
+
+/* eTSEC 4 is currently broken
+ ethernet@27000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ device_type = "network";
+ model = "eTSEC";
+ compatible = "gianfar";
+ reg = <27000 1000>;
+ local-mac-address = [ 00 E0 0C 00 73 03 ];
+ interrupts = <15 2 16 2 17 2>;
+ interrupt-parent = <40000>;
+ phy-handle = <2452001>;
+ };
+ */
+
+ serial@4500 {
+ device_type = "serial";
+ compatible = "ns16550";
+ reg = <4500 100>; // reg base, size
+ clock-frequency = <0>; // should we fill in in uboot?
+ interrupts = <1a 2>;
+ interrupt-parent = <40000>;
+ };
+
+ serial@4600 {
+ device_type = "serial";
+ compatible = "ns16550";
+ reg = <4600 100>; // reg base, size
+ clock-frequency = <0>; // should we fill in in uboot?
+ interrupts = <1a 2>;
+ interrupt-parent = <40000>;
+ };
+
+ pci@8000 {
+ linux,phandle = <8000>;
+ interrupt-map-mask = <1f800 0 0 7>;
+ interrupt-map = <
+
+ /* IDSEL 0x10 */
+ 08000 0 0 1 40000 30 1
+ 08000 0 0 2 40000 31 1
+ 08000 0 0 3 40000 32 1
+ 08000 0 0 4 40000 33 1
+
+ /* IDSEL 0x11 */
+ 08800 0 0 1 40000 30 1
+ 08800 0 0 2 40000 31 1
+ 08800 0 0 3 40000 32 1
+ 08800 0 0 4 40000 33 1
+
+ /* IDSEL 0x12 (Slot 1) */
+ 09000 0 0 1 40000 30 1
+ 09000 0 0 2 40000 31 1
+ 09000 0 0 3 40000 32 1
+ 09000 0 0 4 40000 33 1
+
+ /* IDSEL 0x13 (Slot 2) */
+ 09800 0 0 1 40000 31 1
+ 09800 0 0 2 40000 32 1
+ 09800 0 0 3 40000 33 1
+ 09800 0 0 4 40000 30 1
+
+ /* IDSEL 0x14 (Slot 3) */
+ 0a000 0 0 1 40000 32 1
+ 0a000 0 0 2 40000 33 1
+ 0a000 0 0 3 40000 30 1
+ 0a000 0 0 4 40000 31 1
+
+ /* IDSEL 0x15 (Slot 4) */
+ 0a800 0 0 1 40000 33 1
+ 0a800 0 0 2 40000 30 1
+ 0a800 0 0 3 40000 31 1
+ 0a800 0 0 4 40000 32 1
+
+ /* Bus 1 (Tundra Bridge) */
+ /* IDSEL 0x12 (ISA bridge) */
+ 19000 0 0 1 40000 30 1
+ 19000 0 0 2 40000 31 1
+ 19000 0 0 3 40000 32 1
+ 19000 0 0 4 40000 33 1>;
+ interrupt-parent = <40000>;
+ interrupts = <08 2>;
+ bus-range = <0 0>;
+ ranges = <02000000 0 80000000 80000000 0 20000000
+ 01000000 0 00000000 e2000000 0 00100000>;
+ clock-frequency = <3f940aa>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ reg = <8000 1000>;
+ compatible = "85xx";
+ device_type = "pci";
+
+ i8259@19000 {
+ clock-frequency = <0>;
+ interrupt-controller;
+ device_type = "interrupt-controller";
+ reg = <19000 0 0 0 1>;
+ #address-cells = <0>;
+ #interrupt-cells = <2>;
+ built-in;
+ compatible = "chrp,iic";
+ big-endian;
+ interrupts = <1>;
+ interrupt-parent = <8000>;
+ };
+ };
+
+ pci@9000 {
+ linux,phandle = <9000>;
+ interrupt-map-mask = <f800 0 0 7>;
+ interrupt-map = <
+
+ /* IDSEL 0x15 */
+ a800 0 0 1 40000 3b 1
+ a800 0 0 2 40000 3b 1
+ a800 0 0 3 40000 3b 1
+ a800 0 0 4 40000 3b 1>;
+ interrupt-parent = <40000>;
+ interrupts = <09 2>;
+ bus-range = <0 0>;
+ ranges = <02000000 0 a0000000 a0000000 0 20000000
+ 01000000 0 00000000 e3000000 0 00100000>;
+ clock-frequency = <3f940aa>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ reg = <9000 1000>;
+ compatible = "85xx";
+ device_type = "pci";
+ };
+
+ pic@40000 {
+ linux,phandle = <40000>;
+ clock-frequency = <0>;
+ interrupt-controller;
+ #address-cells = <0>;
+ #interrupt-cells = <2>;
+ reg = <40000 40000>;
+ built-in;
+ compatible = "chrp,open-pic";
+ device_type = "open-pic";
+ big-endian;
+ };
+ };
+};
--- /dev/null
+/*
+ * MPC8555 CDS Device Tree Source
+ *
+ * Copyright 2006 Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+
+/ {
+ model = "MPC8555CDS";
+ compatible = "MPC85xxCDS";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ linux,phandle = <100>;
+
+ cpus {
+ #cpus = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ linux,phandle = <200>;
+
+ PowerPC,8555@0 {
+ device_type = "cpu";
+ reg = <0>;
+ d-cache-line-size = <20>; // 32 bytes
+ i-cache-line-size = <20>; // 32 bytes
+ d-cache-size = <8000>; // L1, 32K
+ i-cache-size = <8000>; // L1, 32K
+ timebase-frequency = <0>; // 33 MHz, from uboot
+ bus-frequency = <0>; // 166 MHz
+ clock-frequency = <0>; // 825 MHz, from uboot
+ 32-bit;
+ linux,phandle = <201>;
+ };
+ };
+
+ memory {
+ device_type = "memory";
+ linux,phandle = <300>;
+ reg = <00000000 08000000>; // 128M at 0x0
+ };
+
+ soc8555@e0000000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ #interrupt-cells = <2>;
+ device_type = "soc";
+ ranges = <0 e0000000 00100000>;
+ reg = <e0000000 00100000>; // CCSRBAR 1M
+ bus-frequency = <0>;
+
+ i2c@3000 {
+ device_type = "i2c";
+ compatible = "fsl-i2c";
+ reg = <3000 100>;
+ interrupts = <1b 2>;
+ interrupt-parent = <40000>;
+ dfsrr;
+ };
+
+ mdio@24520 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ device_type = "mdio";
+ compatible = "gianfar";
+ reg = <24520 20>;
+ linux,phandle = <24520>;
+ ethernet-phy@0 {
+ linux,phandle = <2452000>;
+ interrupt-parent = <40000>;
+ interrupts = <35 0>;
+ reg = <0>;
+ device_type = "ethernet-phy";
+ };
+ ethernet-phy@1 {
+ linux,phandle = <2452001>;
+ interrupt-parent = <40000>;
+ interrupts = <35 0>;
+ reg = <1>;
+ device_type = "ethernet-phy";
+ };
+ };
+
+ ethernet@24000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ device_type = "network";
+ model = "TSEC";
+ compatible = "gianfar";
+ reg = <24000 1000>;
+ local-mac-address = [ 00 E0 0C 00 73 00 ];
+ interrupts = <0d 2 0e 2 12 2>;
+ interrupt-parent = <40000>;
+ phy-handle = <2452000>;
+ };
+
+ ethernet@25000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ device_type = "network";
+ model = "TSEC";
+ compatible = "gianfar";
+ reg = <25000 1000>;
+ local-mac-address = [ 00 E0 0C 00 73 01 ];
+ interrupts = <13 2 14 2 18 2>;
+ interrupt-parent = <40000>;
+ phy-handle = <2452001>;
+ };
+
+ serial@4500 {
+ device_type = "serial";
+ compatible = "ns16550";
+ reg = <4500 100>; // reg base, size
+ clock-frequency = <0>; // should we fill in in uboot?
+ interrupts = <1a 2>;
+ interrupt-parent = <40000>;
+ };
+
+ serial@4600 {
+ device_type = "serial";
+ compatible = "ns16550";
+ reg = <4600 100>; // reg base, size
+ clock-frequency = <0>; // should we fill in in uboot?
+ interrupts = <1a 2>;
+ interrupt-parent = <40000>;
+ };
+
+ pci@8000 {
+ linux,phandle = <8000>;
+ interrupt-map-mask = <1f800 0 0 7>;
+ interrupt-map = <
+
+ /* IDSEL 0x10 */
+ 08000 0 0 1 40000 30 1
+ 08000 0 0 2 40000 31 1
+ 08000 0 0 3 40000 32 1
+ 08000 0 0 4 40000 33 1
+
+ /* IDSEL 0x11 */
+ 08800 0 0 1 40000 30 1
+ 08800 0 0 2 40000 31 1
+ 08800 0 0 3 40000 32 1
+ 08800 0 0 4 40000 33 1
+
+ /* IDSEL 0x12 (Slot 1) */
+ 09000 0 0 1 40000 30 1
+ 09000 0 0 2 40000 31 1
+ 09000 0 0 3 40000 32 1
+ 09000 0 0 4 40000 33 1
+
+ /* IDSEL 0x13 (Slot 2) */
+ 09800 0 0 1 40000 31 1
+ 09800 0 0 2 40000 32 1
+ 09800 0 0 3 40000 33 1
+ 09800 0 0 4 40000 30 1
+
+ /* IDSEL 0x14 (Slot 3) */
+ 0a000 0 0 1 40000 32 1
+ 0a000 0 0 2 40000 33 1
+ 0a000 0 0 3 40000 30 1
+ 0a000 0 0 4 40000 31 1
+
+ /* IDSEL 0x15 (Slot 4) */
+ 0a800 0 0 1 40000 33 1
+ 0a800 0 0 2 40000 30 1
+ 0a800 0 0 3 40000 31 1
+ 0a800 0 0 4 40000 32 1
+
+ /* Bus 1 (Tundra Bridge) */
+ /* IDSEL 0x12 (ISA bridge) */
+ 19000 0 0 1 40000 30 1
+ 19000 0 0 2 40000 31 1
+ 19000 0 0 3 40000 32 1
+ 19000 0 0 4 40000 33 1>;
+ interrupt-parent = <40000>;
+ interrupts = <08 2>;
+ bus-range = <0 0>;
+ ranges = <02000000 0 80000000 80000000 0 20000000
+ 01000000 0 00000000 e2000000 0 00100000>;
+ clock-frequency = <3f940aa>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ reg = <8000 1000>;
+ compatible = "85xx";
+ device_type = "pci";
+
+ i8259@19000 {
+ clock-frequency = <0>;
+ interrupt-controller;
+ device_type = "interrupt-controller";
+ reg = <19000 0 0 0 1>;
+ #address-cells = <0>;
+ #interrupt-cells = <2>;
+ built-in;
+ compatible = "chrp,iic";
+ big-endian;
+ interrupts = <1>;
+ interrupt-parent = <8000>;
+ };
+ };
+
+ pci@9000 {
+ linux,phandle = <9000>;
+ interrupt-map-mask = <f800 0 0 7>;
+ interrupt-map = <
+
+ /* IDSEL 0x15 */
+ a800 0 0 1 40000 3b 1
+ a800 0 0 2 40000 3b 1
+ a800 0 0 3 40000 3b 1
+ a800 0 0 4 40000 3b 1>;
+ interrupt-parent = <40000>;
+ interrupts = <09 2>;
+ bus-range = <0 0>;
+ ranges = <02000000 0 a0000000 a0000000 0 20000000
+ 01000000 0 00000000 e3000000 0 00100000>;
+ clock-frequency = <3f940aa>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ reg = <9000 1000>;
+ compatible = "85xx";
+ device_type = "pci";
+ };
+
+ pic@40000 {
+ linux,phandle = <40000>;
+ clock-frequency = <0>;
+ interrupt-controller;
+ #address-cells = <0>;
+ #interrupt-cells = <2>;
+ reg = <40000 40000>;
+ built-in;
+ compatible = "chrp,open-pic";
+ device_type = "open-pic";
+ big-endian;
+ };
+ };
+};
f800 0 0 4 4d0 0 0
>;
i8259@4d0 {
+ linux,phandle = <4d0>;
clock-frequency = <0>;
interrupt-controller;
device_type = "interrupt-controller";
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.17-rc1
-# Wed Apr 19 13:24:37 2006
+# Linux kernel version: 2.6.18-rc3
+# Tue Aug 8 09:12:29 2006
#
CONFIG_PPC64=y
CONFIG_64BIT=y
CONFIG_PPC_MERGE=y
CONFIG_MMU=y
CONFIG_GENERIC_HARDIRQS=y
+CONFIG_IRQ_PER_CPU=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_PPC=y
CONFIG_EARLY_PRINTK=y
CONFIG_COMPAT=y
CONFIG_VIRT_CPU_ACCOUNTING=y
CONFIG_SMP=y
CONFIG_NR_CPUS=4
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# Code maturity level options
CONFIG_SYSVIPC=y
CONFIG_POSIX_MQUEUE=y
# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
CONFIG_IKCONFIG=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
+CONFIG_RT_MUTEXES=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SHMEM=y
CONFIG_SLAB=y
+CONFIG_VM_EVENT_COUNTERS=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
# CONFIG_SLOB is not set
CONFIG_PPC_PMAC64=y
# CONFIG_PPC_MAPLE is not set
# CONFIG_PPC_CELL is not set
+# CONFIG_PPC_CELL_NATIVE is not set
+# CONFIG_PPC_IBM_CELL_BLADE is not set
+# CONFIG_UDBG_RTAS_CONSOLE is not set
CONFIG_U3_DART=y
CONFIG_MPIC=y
# CONFIG_PPC_RTAS is not set
# CONFIG_MMIO_NVRAM is not set
CONFIG_MPIC_BROKEN_U3=y
# CONFIG_PPC_MPC106 is not set
+CONFIG_PPC_970_NAP=y
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_TABLE=y
# CONFIG_CPU_FREQ_DEBUG is not set
CONFIG_FORCE_MAX_ZONEORDER=13
CONFIG_IOMMU_VMERGE=y
# CONFIG_HOTPLUG_CPU is not set
+CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_KEXEC=y
# CONFIG_CRASH_DUMP is not set
CONFIG_IRQ_ALL_CPUS=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_RESOURCES_64BIT=y
# CONFIG_PPC_64K_PAGES is not set
# CONFIG_SCHED_SMT is not set
CONFIG_PROC_DEVICETREE=y
# CONFIG_PPC_INDIRECT_PCI is not set
CONFIG_PCI=y
CONFIG_PCI_DOMAINS=y
+# CONFIG_PCIEPORTBUS is not set
# CONFIG_PCI_DEBUG is not set
#
CONFIG_INET_IPCOMP=m
CONFIG_INET_XFRM_TUNNEL=m
CONFIG_INET_TUNNEL=y
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
# CONFIG_IPV6 is not set
# CONFIG_INET6_XFRM_TUNNEL is not set
# CONFIG_INET6_TUNNEL is not set
+# CONFIG_NETWORK_SECMARK is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
CONFIG_IP_NF_AMANDA=m
# CONFIG_IP_NF_PPTP is not set
# CONFIG_IP_NF_H323 is not set
+# CONFIG_IP_NF_SIP is not set
CONFIG_IP_NF_QUEUE=m
#
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_SYS_HYPERVISOR is not set
#
# Connector - unified userspace <-> kernelspace linker
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=65536
+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
CONFIG_BLK_DEV_INITRD=y
CONFIG_CDROM_PKTCDVD=m
CONFIG_CDROM_PKTCDVD_BUFFERS=8
CONFIG_BLK_DEV_IDE_PMAC=y
CONFIG_BLK_DEV_IDE_PMAC_ATA100FIRST=y
CONFIG_BLK_DEV_IDEDMA_PMAC=y
-# CONFIG_BLK_DEV_IDE_PMAC_BLINK is not set
# CONFIG_IDE_ARM is not set
CONFIG_BLK_DEV_IDEDMA=y
# CONFIG_IDEDMA_IVB is not set
# CONFIG_SCSI_SATA_MV is not set
# CONFIG_SCSI_SATA_NV is not set
# CONFIG_SCSI_PDC_ADMA is not set
+# CONFIG_SCSI_HPTIOP is not set
# CONFIG_SCSI_SATA_QSTOR is not set
# CONFIG_SCSI_SATA_PROMISE is not set
# CONFIG_SCSI_SATA_SX4 is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_IPR is not set
-# CONFIG_SCSI_QLOGIC_FC is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
# CONFIG_SCSI_QLA_FC is not set
# CONFIG_SCSI_LPFC is not set
CONFIG_MD_RAID0=y
CONFIG_MD_RAID1=y
CONFIG_MD_RAID10=m
-CONFIG_MD_RAID5=y
-# CONFIG_MD_RAID5_RESHAPE is not set
-CONFIG_MD_RAID6=m
+# CONFIG_MD_RAID456 is not set
CONFIG_MD_MULTIPATH=m
CONFIG_MD_FAULTY=m
CONFIG_BLK_DEV_DM=y
#
CONFIG_IEEE1394_VIDEO1394=m
CONFIG_IEEE1394_SBP2=m
-# CONFIG_IEEE1394_SBP2_PHYS_DMA is not set
CONFIG_IEEE1394_ETH1394=m
CONFIG_IEEE1394_DV1394=m
CONFIG_IEEE1394_RAWIO=y
# Macintosh device drivers
#
CONFIG_ADB_PMU=y
+# CONFIG_ADB_PMU_LED is not set
CONFIG_PMAC_SMU=y
CONFIG_THERM_PM72=y
CONFIG_WINDFARM=y
# CONFIG_CHELSIO_T1 is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
+# CONFIG_MYRI10GE is not set
#
# Token Ring devices
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
# CONFIG_SERIAL_NONSTANDARD is not set
#
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_BRIQ_PANEL is not set
#
# IPMI
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
+# CONFIG_HW_RANDOM is not set
CONFIG_GEN_RTC=y
# CONFIG_GEN_RTC_X is not set
# CONFIG_DTLK is not set
# Ftape, the floppy tape device driver
#
CONFIG_AGP=m
+# CONFIG_AGP_SIS is not set
# CONFIG_AGP_VIA is not set
CONFIG_AGP_UNINORTH=m
# CONFIG_DRM is not set
# CONFIG_I2C_PIIX4 is not set
CONFIG_I2C_POWERMAC=y
# CONFIG_I2C_NFORCE2 is not set
+# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_PROSAVAGE is not set
# CONFIG_I2C_SAVAGE4 is not set
#
# Dallas's 1-wire bus
#
-# CONFIG_W1 is not set
#
# Hardware Monitoring support
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
+CONFIG_VIDEO_V4L2=y
#
# Digital Video Broadcasting Devices
#
# Graphics support
#
+CONFIG_FIRMWARE_EDID=y
CONFIG_FB=y
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
CONFIG_FB_MACMODES=y
-CONFIG_FB_FIRMWARE_EDID=y
+# CONFIG_FB_BACKLIGHT is not set
CONFIG_FB_MODE_HELPERS=y
CONFIG_FB_TILEBLITTING=y
# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
CONFIG_FB_OF=y
-# CONFIG_FB_CONTROL is not set
-# CONFIG_FB_PLATINUM is not set
-# CONFIG_FB_VALKYRIE is not set
-# CONFIG_FB_CT65550 is not set
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
# CONFIG_FB_VGA16 is not set
# CONFIG_SND_CMIPCI is not set
# CONFIG_SND_CS4281 is not set
# CONFIG_SND_CS46XX is not set
+# CONFIG_SND_DARLA20 is not set
+# CONFIG_SND_GINA20 is not set
+# CONFIG_SND_LAYLA20 is not set
+# CONFIG_SND_DARLA24 is not set
+# CONFIG_SND_GINA24 is not set
+# CONFIG_SND_LAYLA24 is not set
+# CONFIG_SND_MONA is not set
+# CONFIG_SND_MIA is not set
+# CONFIG_SND_ECHO3G is not set
+# CONFIG_SND_INDIGO is not set
+# CONFIG_SND_INDIGOIO is not set
+# CONFIG_SND_INDIGODJ is not set
# CONFIG_SND_EMU10K1 is not set
# CONFIG_SND_EMU10K1X is not set
# CONFIG_SND_ENS1370 is not set
CONFIG_SND_POWERMAC=m
CONFIG_SND_POWERMAC_AUTO_DRC=y
+#
+# Apple Onboard Audio driver
+#
+CONFIG_SND_AOA=m
+CONFIG_SND_AOA_FABRIC_LAYOUT=m
+CONFIG_SND_AOA_ONYX=m
+CONFIG_SND_AOA_TAS=m
+CONFIG_SND_AOA_TOONIE=m
+CONFIG_SND_AOA_SOUNDBUS=m
+CONFIG_SND_AOA_SOUNDBUS_I2S=m
+
#
# USB devices
#
CONFIG_USB_EHCI_HCD=y
# CONFIG_USB_EHCI_SPLIT_ISO is not set
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
+# CONFIG_USB_EHCI_TT_NEWSCHED is not set
# CONFIG_USB_ISP116X_HCD is not set
CONFIG_USB_OHCI_HCD=y
# CONFIG_USB_OHCI_BIG_ENDIAN is not set
# CONFIG_USB_ACECAD is not set
# CONFIG_USB_KBTAB is not set
# CONFIG_USB_POWERMATE is not set
-# CONFIG_USB_MTOUCH is not set
-# CONFIG_USB_ITMTOUCH is not set
-# CONFIG_USB_EGALAX is not set
+# CONFIG_USB_TOUCHSCREEN is not set
# CONFIG_USB_YEALINK is not set
# CONFIG_USB_XPAD is not set
# CONFIG_USB_ATI_REMOTE is not set
CONFIG_USB_SERIAL_GENERIC=y
# CONFIG_USB_SERIAL_AIRPRIME is not set
# CONFIG_USB_SERIAL_ANYDATA is not set
+# CONFIG_USB_SERIAL_ARK3116 is not set
CONFIG_USB_SERIAL_BELKIN=m
# CONFIG_USB_SERIAL_WHITEHEAT is not set
CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
CONFIG_USB_SERIAL_CYPRESS_M8=m
CONFIG_USB_SERIAL_EMPEG=m
CONFIG_USB_SERIAL_FTDI_SIO=m
+# CONFIG_USB_SERIAL_FUNSOFT is not set
CONFIG_USB_SERIAL_VISOR=m
CONFIG_USB_SERIAL_IPAQ=m
CONFIG_USB_SERIAL_IR=m
# CONFIG_USB_SERIAL_HP4X is not set
CONFIG_USB_SERIAL_SAFE=m
CONFIG_USB_SERIAL_SAFE_PADDED=y
+# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
CONFIG_USB_SERIAL_TI=m
CONFIG_USB_SERIAL_CYBERJACK=m
CONFIG_USB_SERIAL_XIRCOM=m
+# CONFIG_USB_SERIAL_OPTION is not set
CONFIG_USB_SERIAL_OMNINET=m
CONFIG_USB_EZUSB=y
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_PHIDGETKIT is not set
# CONFIG_USB_PHIDGETSERVO is not set
# CONFIG_USB_IDMOUSE is not set
+CONFIG_USB_APPLEDISPLAY=m
# CONFIG_USB_SISUSBVGA is not set
# CONFIG_USB_LD is not set
# CONFIG_USB_TEST is not set
#
# CONFIG_NEW_LEDS is not set
+#
+# LED drivers
+#
+
+#
+# LED Triggers
+#
+
#
# InfiniBand support
#
#
# CONFIG_RTC_CLASS is not set
+#
+# DMA Engine support
+#
+# CONFIG_DMA_ENGINE is not set
+
+#
+# DMA Clients
+#
+
+#
+# DMA Devices
+#
+
#
# File systems
#
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
CONFIG_XFS_FS=m
-CONFIG_XFS_EXPORT=y
# CONFIG_XFS_QUOTA is not set
CONFIG_XFS_SECURITY=y
CONFIG_XFS_POSIX_ACL=y
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
CONFIG_DNOTIFY=y
CONFIG_AUTOFS_FS=m
# CONFIG_SMB_FS is not set
CONFIG_CIFS=m
# CONFIG_CIFS_STATS is not set
+# CONFIG_CIFS_WEAK_PW_HASH is not set
# CONFIG_CIFS_XATTR is not set
+# CONFIG_CIFS_DEBUG2 is not set
# CONFIG_CIFS_EXPERIMENTAL is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
CONFIG_LIBCRC32C=m
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=m
+CONFIG_TEXTSEARCH=y
+CONFIG_TEXTSEARCH_KMP=m
+CONFIG_PLIST=y
#
# Instrumentation Support
#
# CONFIG_PRINTK_TIME is not set
CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_KERNEL=y
CONFIG_LOG_BUF_SHIFT=17
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_DEBUG_SLAB is not set
-CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
+CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_RWSEMS is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_INFO is not set
CONFIG_DEBUG_FS=y
# CONFIG_DEBUGGER is not set
CONFIG_IRQSTACKS=y
CONFIG_BOOTX_TEXT=y
-# CONFIG_PPC_EARLY_DEBUG_LPAR is not set
-# CONFIG_PPC_EARLY_DEBUG_G5 is not set
-# CONFIG_PPC_EARLY_DEBUG_RTAS is not set
-# CONFIG_PPC_EARLY_DEBUG_MAPLE is not set
-# CONFIG_PPC_EARLY_DEBUG_ISERIES is not set
+# CONFIG_PPC_EARLY_DEBUG is not set
#
# Security options
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.17-rc1
-# Wed Apr 19 11:46:44 2006
+# Linux kernel version: 2.6.18-rc3
+# Tue Aug 8 09:15:46 2006
#
CONFIG_PPC64=y
CONFIG_64BIT=y
CONFIG_PPC_MERGE=y
CONFIG_MMU=y
CONFIG_GENERIC_HARDIRQS=y
+CONFIG_IRQ_PER_CPU=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_PPC=y
CONFIG_EARLY_PRINTK=y
CONFIG_COMPAT=y
CONFIG_VIRT_CPU_ACCOUNTING=y
CONFIG_SMP=y
CONFIG_NR_CPUS=32
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# Code maturity level options
CONFIG_SYSVIPC=y
CONFIG_POSIX_MQUEUE=y
# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
CONFIG_SYSCTL=y
CONFIG_AUDIT=y
CONFIG_AUDITSYSCALL=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
+CONFIG_RT_MUTEXES=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SHMEM=y
CONFIG_SLAB=y
+CONFIG_VM_EVENT_COUNTERS=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
# CONFIG_SLOB is not set
CONFIG_PPC_ISERIES=y
# CONFIG_EMBEDDED6xx is not set
# CONFIG_APUS is not set
+# CONFIG_PPC_CELL is not set
+# CONFIG_PPC_CELL_NATIVE is not set
+# CONFIG_UDBG_RTAS_CONSOLE is not set
# CONFIG_PPC_RTAS is not set
# CONFIG_MMIO_NVRAM is not set
CONFIG_IBMVIO=y
# CONFIG_PPC_MPC106 is not set
+# CONFIG_PPC_970_NAP is not set
# CONFIG_CPU_FREQ is not set
# CONFIG_WANT_EARLY_SERIAL is not set
# CONFIG_BINFMT_MISC is not set
CONFIG_FORCE_MAX_ZONEORDER=13
CONFIG_IOMMU_VMERGE=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_IRQ_ALL_CPUS=y
CONFIG_LPARCFG=y
# CONFIG_NUMA is not set
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_RESOURCES_64BIT=y
# CONFIG_PPC_64K_PAGES is not set
# CONFIG_SCHED_SMT is not set
CONFIG_PROC_DEVICETREE=y
# CONFIG_PPC_INDIRECT_PCI is not set
CONFIG_PCI=y
CONFIG_PCI_DOMAINS=y
+# CONFIG_PCIEPORTBUS is not set
# CONFIG_PCI_DEBUG is not set
#
CONFIG_INET_IPCOMP=m
CONFIG_INET_XFRM_TUNNEL=m
CONFIG_INET_TUNNEL=y
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
# CONFIG_IPV6 is not set
# CONFIG_INET6_XFRM_TUNNEL is not set
# CONFIG_INET6_TUNNEL is not set
+# CONFIG_NETWORK_SECMARK is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
# CONFIG_NETFILTER_XT_MATCH_POLICY is not set
# CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set
CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
+# CONFIG_NETFILTER_XT_MATCH_QUOTA is not set
CONFIG_NETFILTER_XT_MATCH_REALM=m
CONFIG_NETFILTER_XT_MATCH_SCTP=m
CONFIG_NETFILTER_XT_MATCH_STATE=m
+# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set
CONFIG_NETFILTER_XT_MATCH_STRING=m
CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
CONFIG_IP_NF_AMANDA=m
# CONFIG_IP_NF_PPTP is not set
# CONFIG_IP_NF_H323 is not set
+# CONFIG_IP_NF_SIP is not set
CONFIG_IP_NF_QUEUE=m
CONFIG_IP_NF_IPTABLES=m
CONFIG_IP_NF_MATCH_IPRANGE=m
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=m
# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_SYS_HYPERVISOR is not set
#
# Connector - unified userspace <-> kernelspace linker
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=65536
+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
CONFIG_BLK_DEV_INITRD=y
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
# CONFIG_SCSI_SATA is not set
+# CONFIG_SCSI_HPTIOP is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_IPR is not set
-# CONFIG_SCSI_QLOGIC_FC is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
# CONFIG_SCSI_QLA_FC is not set
# CONFIG_SCSI_LPFC is not set
CONFIG_MD_RAID0=y
CONFIG_MD_RAID1=y
CONFIG_MD_RAID10=m
-CONFIG_MD_RAID5=y
-# CONFIG_MD_RAID5_RESHAPE is not set
-CONFIG_MD_RAID6=m
+# CONFIG_MD_RAID456 is not set
CONFIG_MD_MULTIPATH=m
CONFIG_MD_FAULTY=m
CONFIG_BLK_DEV_DM=y
# CONFIG_CHELSIO_T1 is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
+# CONFIG_MYRI10GE is not set
#
# Token Ring devices
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_BRIQ_PANEL is not set
#
# IPMI
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
+# CONFIG_HW_RANDOM is not set
CONFIG_GEN_RTC=y
# CONFIG_GEN_RTC_X is not set
# CONFIG_DTLK is not set
#
# Dallas's 1-wire bus
#
-# CONFIG_W1 is not set
#
# Hardware Monitoring support
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
+CONFIG_VIDEO_V4L2=y
#
# Digital Video Broadcasting Devices
#
# Graphics support
#
+CONFIG_FIRMWARE_EDID=y
# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Sound
#
# CONFIG_NEW_LEDS is not set
+#
+# LED drivers
+#
+
+#
+# LED Triggers
+#
+
#
# InfiniBand support
#
#
# CONFIG_RTC_CLASS is not set
+#
+# DMA Engine support
+#
+# CONFIG_DMA_ENGINE is not set
+
+#
+# DMA Clients
+#
+
+#
+# DMA Devices
+#
+
#
# File systems
#
# CONFIG_JFS_STATISTICS is not set
CONFIG_FS_POSIX_ACL=y
CONFIG_XFS_FS=m
-CONFIG_XFS_EXPORT=y
# CONFIG_XFS_QUOTA is not set
CONFIG_XFS_SECURITY=y
CONFIG_XFS_POSIX_ACL=y
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
CONFIG_DNOTIFY=y
CONFIG_AUTOFS_FS=m
# CONFIG_SMB_FS is not set
CONFIG_CIFS=m
# CONFIG_CIFS_STATS is not set
+# CONFIG_CIFS_WEAK_PW_HASH is not set
CONFIG_CIFS_XATTR=y
CONFIG_CIFS_POSIX=y
+# CONFIG_CIFS_DEBUG2 is not set
# CONFIG_CIFS_EXPERIMENTAL is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
CONFIG_TEXTSEARCH_KMP=m
CONFIG_TEXTSEARCH_BM=m
CONFIG_TEXTSEARCH_FSM=m
+CONFIG_PLIST=y
#
# Instrumentation Support
#
+# CONFIG_PROFILING is not set
# CONFIG_KPROBES is not set
#
#
# CONFIG_PRINTK_TIME is not set
CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_KERNEL=y
CONFIG_LOG_BUF_SHIFT=17
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_RWSEMS is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_INFO is not set
CONFIG_DEBUG_FS=y
CONFIG_DEBUG_STACK_USAGE=y
# CONFIG_DEBUGGER is not set
CONFIG_IRQSTACKS=y
-# CONFIG_PPC_EARLY_DEBUG_LPAR is not set
-# CONFIG_PPC_EARLY_DEBUG_G5 is not set
-# CONFIG_PPC_EARLY_DEBUG_RTAS is not set
-# CONFIG_PPC_EARLY_DEBUG_MAPLE is not set
-# CONFIG_PPC_EARLY_DEBUG_ISERIES is not set
+# CONFIG_PPC_EARLY_DEBUG is not set
#
# Security options
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.17-rc4
-# Sun May 28 07:26:56 2006
+# Linux kernel version: 2.6.18-rc3
+# Tue Aug 8 09:14:48 2006
#
CONFIG_PPC64=y
CONFIG_64BIT=y
CONFIG_PPC_MERGE=y
CONFIG_MMU=y
CONFIG_GENERIC_HARDIRQS=y
+CONFIG_IRQ_PER_CPU=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_VIRT_CPU_ACCOUNTING=y
CONFIG_SMP=y
CONFIG_NR_CPUS=128
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# Code maturity level options
CONFIG_SYSVIPC=y
CONFIG_POSIX_MQUEUE=y
# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
CONFIG_SYSCTL=y
CONFIG_AUDIT=y
CONFIG_AUDITSYSCALL=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
+CONFIG_RT_MUTEXES=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SHMEM=y
CONFIG_SLAB=y
+CONFIG_VM_EVENT_COUNTERS=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
# CONFIG_SLOB is not set
# CONFIG_PPC_PMAC is not set
# CONFIG_PPC_MAPLE is not set
# CONFIG_PPC_CELL is not set
+# CONFIG_PPC_CELL_NATIVE is not set
+# CONFIG_PPC_IBM_CELL_BLADE is not set
+# CONFIG_UDBG_RTAS_CONSOLE is not set
CONFIG_XICS=y
# CONFIG_U3_DART is not set
CONFIG_MPIC=y
CONFIG_FORCE_MAX_ZONEORDER=13
CONFIG_IOMMU_VMERGE=y
CONFIG_HOTPLUG_CPU=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_KEXEC=y
# CONFIG_CRASH_DUMP is not set
CONFIG_IRQ_ALL_CPUS=y
# CONFIG_MEMORY_HOTPLUG is not set
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_MIGRATION=y
+CONFIG_RESOURCES_64BIT=y
CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID=y
# CONFIG_PPC_64K_PAGES is not set
CONFIG_SCHED_SMT=y
# CONFIG_PPC_INDIRECT_PCI is not set
CONFIG_PCI=y
CONFIG_PCI_DOMAINS=y
+# CONFIG_PCIEPORTBUS is not set
# CONFIG_PCI_DEBUG is not set
#
CONFIG_INET_IPCOMP=m
CONFIG_INET_XFRM_TUNNEL=m
CONFIG_INET_TUNNEL=y
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
# CONFIG_IPV6 is not set
# CONFIG_INET6_XFRM_TUNNEL is not set
# CONFIG_INET6_TUNNEL is not set
+# CONFIG_NETWORK_SECMARK is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
CONFIG_IP_NF_AMANDA=m
# CONFIG_IP_NF_PPTP is not set
# CONFIG_IP_NF_H323 is not set
+# CONFIG_IP_NF_SIP is not set
CONFIG_IP_NF_QUEUE=m
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
+# CONFIG_NET_TCPPROBE is not set
# CONFIG_HAMRADIO is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_SYS_HYPERVISOR is not set
#
# Connector - unified userspace <-> kernelspace linker
# CONFIG_PARPORT_PC_FIFO is not set
# CONFIG_PARPORT_PC_SUPERIO is not set
# CONFIG_PARPORT_GSC is not set
+# CONFIG_PARPORT_AX88796 is not set
# CONFIG_PARPORT_1284 is not set
#
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=65536
+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
CONFIG_BLK_DEV_INITRD=y
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
# CONFIG_SCSI_SATA is not set
+# CONFIG_SCSI_HPTIOP is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_EATA is not set
CONFIG_SCSI_IPR_DUMP=y
# CONFIG_SCSI_QLOGIC_1280 is not set
CONFIG_SCSI_QLA_FC=m
-CONFIG_SCSI_QLA2XXX_EMBEDDED_FIRMWARE=y
-CONFIG_SCSI_QLA21XX=m
-CONFIG_SCSI_QLA22XX=m
-CONFIG_SCSI_QLA2300=m
-CONFIG_SCSI_QLA2322=m
-CONFIG_SCSI_QLA24XX=m
CONFIG_SCSI_LPFC=m
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
CONFIG_MD_RAID0=y
CONFIG_MD_RAID1=y
CONFIG_MD_RAID10=m
-CONFIG_MD_RAID5=y
-CONFIG_MD_RAID5_RESHAPE=y
-CONFIG_MD_RAID6=m
+# CONFIG_MD_RAID456 is not set
CONFIG_MD_MULTIPATH=m
CONFIG_MD_FAULTY=m
CONFIG_BLK_DEV_DM=y
# CONFIG_IXGB_NAPI is not set
CONFIG_S2IO=m
# CONFIG_S2IO_NAPI is not set
+# CONFIG_MYRI10GE is not set
#
# Token Ring devices
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
# CONFIG_SERIAL_NONSTANDARD is not set
#
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_BRIQ_PANEL is not set
# CONFIG_PRINTER is not set
# CONFIG_PPDEV is not set
# CONFIG_TIPAR is not set
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
+# CONFIG_HW_RANDOM is not set
CONFIG_GEN_RTC=y
# CONFIG_GEN_RTC_X is not set
# CONFIG_DTLK is not set
# CONFIG_I2C_I810 is not set
# CONFIG_I2C_PIIX4 is not set
# CONFIG_I2C_NFORCE2 is not set
+# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_PARPORT is not set
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_PROSAVAGE is not set
#
# Dallas's 1-wire bus
#
-# CONFIG_W1 is not set
#
# Hardware Monitoring support
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
+CONFIG_VIDEO_V4L2=y
#
# Digital Video Broadcasting Devices
#
# Graphics support
#
+CONFIG_FIRMWARE_EDID=y
CONFIG_FB=y
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
CONFIG_FB_MACMODES=y
-CONFIG_FB_FIRMWARE_EDID=y
+# CONFIG_FB_BACKLIGHT is not set
CONFIG_FB_MODE_HELPERS=y
CONFIG_FB_TILEBLITTING=y
# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
CONFIG_FB_OF=y
-# CONFIG_FB_CT65550 is not set
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
# CONFIG_FB_VGA16 is not set
CONFIG_USB_EHCI_HCD=y
# CONFIG_USB_EHCI_SPLIT_ISO is not set
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
+# CONFIG_USB_EHCI_TT_NEWSCHED is not set
# CONFIG_USB_ISP116X_HCD is not set
CONFIG_USB_OHCI_HCD=y
# CONFIG_USB_OHCI_BIG_ENDIAN is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_PHIDGETKIT is not set
# CONFIG_USB_PHIDGETSERVO is not set
# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_APPLEDISPLAY is not set
# CONFIG_USB_SISUSBVGA is not set
# CONFIG_USB_LD is not set
# CONFIG_USB_TEST is not set
CONFIG_INFINIBAND=m
CONFIG_INFINIBAND_USER_MAD=m
CONFIG_INFINIBAND_USER_ACCESS=m
+CONFIG_INFINIBAND_ADDR_TRANS=y
CONFIG_INFINIBAND_MTHCA=m
CONFIG_INFINIBAND_MTHCA_DEBUG=y
CONFIG_INFINIBAND_IPOIB=m
CONFIG_INFINIBAND_IPOIB_DEBUG=y
# CONFIG_INFINIBAND_IPOIB_DEBUG_DATA is not set
CONFIG_INFINIBAND_SRP=m
+# CONFIG_INFINIBAND_ISER is not set
#
# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
#
# CONFIG_RTC_CLASS is not set
+#
+# DMA Engine support
+#
+# CONFIG_DMA_ENGINE is not set
+
+#
+# DMA Clients
+#
+
+#
+# DMA Devices
+#
+
#
# File systems
#
# CONFIG_JFS_STATISTICS is not set
CONFIG_FS_POSIX_ACL=y
CONFIG_XFS_FS=m
-CONFIG_XFS_EXPORT=y
# CONFIG_XFS_QUOTA is not set
CONFIG_XFS_SECURITY=y
CONFIG_XFS_POSIX_ACL=y
# CONFIG_XFS_RT is not set
CONFIG_OCFS2_FS=m
+CONFIG_OCFS2_DEBUG_MASKLOG=y
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
# CONFIG_SMB_FS is not set
CONFIG_CIFS=m
# CONFIG_CIFS_STATS is not set
+# CONFIG_CIFS_WEAK_PW_HASH is not set
CONFIG_CIFS_XATTR=y
CONFIG_CIFS_POSIX=y
+# CONFIG_CIFS_DEBUG2 is not set
# CONFIG_CIFS_EXPERIMENTAL is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
CONFIG_LIBCRC32C=m
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=m
+CONFIG_TEXTSEARCH=y
+CONFIG_TEXTSEARCH_KMP=m
+CONFIG_PLIST=y
#
# Instrumentation Support
#
# CONFIG_PRINTK_TIME is not set
CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_KERNEL=y
CONFIG_LOG_BUF_SHIFT=17
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_RWSEMS is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_INFO is not set
CONFIG_DEBUG_FS=y
pci_direct_iommu.o iomap.o
pci32-$(CONFIG_PPC32) := pci_32.o
obj-$(CONFIG_PCI) += $(pci64-y) $(pci32-y)
-kexec-$(CONFIG_PPC64) := machine_kexec_64.o crash.o
+kexec-$(CONFIG_PPC64) := machine_kexec_64.o
kexec-$(CONFIG_PPC32) := machine_kexec_32.o
-obj-$(CONFIG_KEXEC) += machine_kexec.o $(kexec-y)
+obj-$(CONFIG_KEXEC) += machine_kexec.o crash.o $(kexec-y)
ifeq ($(CONFIG_PPC_ISERIES),y)
$(obj)/head_64.o: $(obj)/lparmap.s
mfspr r0,SPRN_HID0
li r11,5 /* clear DOZE and SLEEP */
rldimi r0,r11,52,8 /* set NAP and DPM */
+ li r11,0
+ rldimi r0,r11,32,31 /* clear EN_ATTN */
mtspr SPRN_HID0,r0
mfspr r0,SPRN_HID0
mfspr r0,SPRN_HID0
/* This keeps a track of which one is crashing cpu. */
int crashing_cpu = -1;
static cpumask_t cpus_in_crash = CPU_MASK_NONE;
+cpumask_t cpus_in_sr = CPU_MASK_NONE;
static u32 *append_elf_note(u32 *buf, char *name, unsigned type, void *data,
size_t data_len)
if (ppc_md.kexec_cpu_down)
ppc_md.kexec_cpu_down(1, 1);
+
+#ifdef CONFIG_PPC64
kexec_smp_wait();
+#else
+ for (;;); /* FIXME */
+#endif
+
/* NOTREACHED */
}
*
* do this if kexec in setup.c ?
*/
+#ifdef CONFIG_PPC64
smp_release_cpus();
+#else
+ /* FIXME */
+#endif
}
void crash_kexec_secondary(struct pt_regs *regs)
/* If not there, try to insert it */
virq = irq_find_mapping(host, hwirq);
if (virq != NO_IRQ)
- radix_tree_insert(tree, virq, &irq_map[virq]);
+ radix_tree_insert(tree, hwirq, &irq_map[virq]);
bail:
spin_unlock_irqrestore(&irq_big_lock, flags);
return virq;
if (!ret) {
memcpy(p->ainsn.insn, p->addr, MAX_INSN_SIZE * sizeof(kprobe_opcode_t));
p->opcode = *p->addr;
+ flush_icache_range((unsigned long)p->ainsn.insn,
+ (unsigned long)p->ainsn.insn + sizeof(kprobe_opcode_t));
}
return ret;
u64 addr;
const u32 *addrp;
upf_t flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_SHARE_IRQ;
+ struct device_node *tsi = of_get_parent(np);
/* We only support ports that have a clock frequency properly
* encoded in the device-tree.
/* Add port, irq will be dealt with later. We passed a translated
* IO port value. It will be fixed up later along with the irq
*/
- return add_legacy_port(np, -1, UPIO_MEM, addr, addr, NO_IRQ, flags, 0);
+ if (tsi && !strcmp(tsi->type, "tsi-bridge"))
+ return add_legacy_port(np, -1, UPIO_TSI, addr, addr, NO_IRQ, flags, 0);
+ else
+ return add_legacy_port(np, -1, UPIO_MEM, addr, addr, NO_IRQ, flags, 0);
}
static int __init add_legacy_isa_port(struct device_node *np,
fixup_port_irq(i, np, port);
if (port->iotype == UPIO_PORT)
fixup_port_pio(i, np, port);
- if (port->iotype == UPIO_MEM)
+ if ((port->iotype == UPIO_MEM) || (port->iotype == UPIO_TSI))
fixup_port_mmio(i, np, port);
}
#include <linux/reboot.h>
#include <linux/threads.h>
#include <asm/machdep.h>
+#include <asm/lmb.h>
void machine_crash_shutdown(struct pt_regs *regs)
{
}
for(;;);
}
+
+static int __init early_parse_crashk(char *p)
+{
+ unsigned long size;
+
+ if (!p)
+ return 1;
+
+ size = memparse(p, &p);
+
+ if (*p == '@')
+ crashk_res.start = memparse(p + 1, &p);
+ else
+ crashk_res.start = KDUMP_KERNELBASE;
+
+ crashk_res.end = crashk_res.start + size - 1;
+
+ return 0;
+}
+early_param("crashkernel", early_parse_crashk);
+
+void __init reserve_crashkernel(void)
+{
+ unsigned long size;
+
+ if (crashk_res.start == 0)
+ return;
+
+ /* We might have got these values via the command line or the
+ * device tree, either way sanitise them now. */
+
+ size = crashk_res.end - crashk_res.start + 1;
+
+ if (crashk_res.start != KDUMP_KERNELBASE)
+ printk("Crash kernel location must be 0x%x\n",
+ KDUMP_KERNELBASE);
+
+ crashk_res.start = KDUMP_KERNELBASE;
+ size = PAGE_ALIGN(size);
+ crashk_res.end = crashk_res.start + size - 1;
+
+ /* Crash kernel trumps memory limit */
+ if (memory_limit && memory_limit <= crashk_res.end) {
+ memory_limit = crashk_res.end + 1;
+ printk("Adjusted memory limit for crashkernel, now 0x%lx\n",
+ memory_limit);
+ }
+
+ lmb_reserve(crashk_res.start, size);
+}
+
+int overlaps_crashkernel(unsigned long start, unsigned long size)
+{
+ return (start + size) > crashk_res.start && start <= crashk_res.end;
+}
*/
-#include <linux/cpumask.h>
#include <linux/kexec.h>
#include <linux/smp.h>
#include <linux/thread_info.h>
#include <asm/machdep.h>
#include <asm/cacheflush.h>
#include <asm/paca.h>
-#include <asm/lmb.h>
#include <asm/mmu.h>
#include <asm/sections.h> /* _end */
#include <asm/prom.h>
return 0;
}
__initcall(kexec_setup);
-
-static int __init early_parse_crashk(char *p)
-{
- unsigned long size;
-
- if (!p)
- return 1;
-
- size = memparse(p, &p);
-
- if (*p == '@')
- crashk_res.start = memparse(p + 1, &p);
- else
- crashk_res.start = KDUMP_KERNELBASE;
-
- crashk_res.end = crashk_res.start + size - 1;
-
- return 0;
-}
-early_param("crashkernel", early_parse_crashk);
-
-void __init reserve_crashkernel(void)
-{
- unsigned long size;
-
- if (crashk_res.start == 0)
- return;
-
- /* We might have got these values via the command line or the
- * device tree, either way sanitise them now. */
-
- size = crashk_res.end - crashk_res.start + 1;
-
- if (crashk_res.start != KDUMP_KERNELBASE)
- printk("Crash kernel location must be 0x%x\n",
- KDUMP_KERNELBASE);
-
- crashk_res.start = KDUMP_KERNELBASE;
- size = PAGE_ALIGN(size);
- crashk_res.end = crashk_res.start + size - 1;
-
- /* Crash kernel trumps memory limit */
- if (memory_limit && memory_limit <= crashk_res.end) {
- memory_limit = crashk_res.end + 1;
- printk("Adjusted memory limit for crashkernel, now 0x%lx\n",
- memory_limit);
- }
-
- lmb_reserve(crashk_res.start, size);
-}
-
-int overlaps_crashkernel(unsigned long start, unsigned long size)
-{
- return (start + size) > crashk_res.start && start <= crashk_res.end;
-}
return p;
}
-static u8 of_irq_pci_swizzle(u8 slot, u8 pin)
-{
- return (((pin - 1) + slot) % 4) + 1;
-}
-
/* This doesn't need to be called if you don't have any special workaround
* flags to pass
*/
}
EXPORT_SYMBOL_GPL(of_irq_map_one);
+#ifdef CONFIG_PCI
+static u8 of_irq_pci_swizzle(u8 slot, u8 pin)
+{
+ return (((pin - 1) + slot) % 4) + 1;
+}
+
int of_irq_map_pci(struct pci_dev *pdev, struct of_irq *out_irq)
{
struct device_node *dn, *ppnode;
return of_irq_map_raw(ppnode, &lspec, laddr, out_irq);
}
EXPORT_SYMBOL_GPL(of_irq_map_pci);
-
+#endif /* CONFIG_PCI */
/*
* This version of gettimeofday has microsecond resolution.
*/
-static inline void __do_gettimeofday(struct timeval *tv, u64 tb_val)
+static inline void __do_gettimeofday(struct timeval *tv)
{
unsigned long sec, usec;
u64 tb_ticks, xsec;
* without a divide (and in fact, without a multiply)
*/
temp_varp = do_gtod.varp;
- tb_ticks = tb_val - temp_varp->tb_orig_stamp;
+
+ /* Sampling the time base must be done after loading
+ * do_gtod.varp in order to avoid racing with update_gtod.
+ */
+ data_barrier(temp_varp);
+ tb_ticks = get_tb() - temp_varp->tb_orig_stamp;
temp_tb_to_xs = temp_varp->tb_to_xs;
temp_stamp_xsec = temp_varp->stamp_xsec;
xsec = temp_stamp_xsec + mulhdu(tb_ticks, temp_tb_to_xs);
tv->tv_usec = usec;
return;
}
- __do_gettimeofday(tv, get_tb());
+ __do_gettimeofday(tv);
}
EXPORT_SYMBOL(do_gettimeofday);
int next_dec;
int cpu = smp_processor_id();
unsigned long ticks;
+ u64 tb_next_jiffy;
#ifdef CONFIG_PPC32
if (atomic_read(&ppc_n_lost_interrupts) != 0)
continue;
write_seqlock(&xtime_lock);
- tb_last_jiffy += tb_ticks_per_jiffy;
- tb_last_stamp = per_cpu(last_jiffy, cpu);
- do_timer(regs);
- timer_recalc_offset(tb_last_jiffy);
- timer_check_rtc();
+ tb_next_jiffy = tb_last_jiffy + tb_ticks_per_jiffy;
+ if (per_cpu(last_jiffy, cpu) >= tb_next_jiffy) {
+ tb_last_jiffy = tb_next_jiffy;
+ tb_last_stamp = per_cpu(last_jiffy, cpu);
+ do_timer(regs);
+ timer_recalc_offset(tb_last_jiffy);
+ timer_check_rtc();
+ }
write_sequnlock(&xtime_lock);
}
#ifdef CONFIG_PPC64 /* XXX */
#define _IO_BASE pci_io_base
-#ifdef CONFIG_KEXEC
-cpumask_t cpus_in_sr = CPU_MASK_NONE;
-#endif
#endif
#ifdef CONFIG_DEBUGGER
die("System Reset", regs, SIGABRT);
+ /*
+ * Some CPUs when released from the debugger will execute this path.
+ * These CPUs entered the debugger via a soft-reset. If the CPU was
+ * hung before entering the debugger it will return to the hung
+ * state when exiting this function. This causes a problem in
+ * kdump since the hung CPU(s) will not respond to the IPI sent
+ * from kdump. To prevent the problem we call crash_kexec_secondary()
+ * here. If a kdump had not been initiated or we exit the debugger
+ * with the "exit and recover" command (x) crash_kexec_secondary()
+ * will return after 5ms and the CPU returns to its previous state.
+ */
+ crash_kexec_secondary(regs);
+
/* Must die if the interrupt is not recoverable */
if (!(regs->msr & MSR_RI))
panic("Unrecoverable System Reset");
#define INST_MFSPR_PVR_MASK 0xfc1fffff
#define INST_DCBA 0x7c0005ec
-#define INST_DCBA_MASK 0x7c0007fe
+#define INST_DCBA_MASK 0xfc0007fe
#define INST_MCRXR 0x7c000400
-#define INST_MCRXR_MASK 0x7c0007fe
+#define INST_MCRXR_MASK 0xfc0007fe
#define INST_STRING 0x7c00042a
-#define INST_STRING_MASK 0x7c0007fe
-#define INST_STRING_GEN_MASK 0x7c00067e
+#define INST_STRING_MASK 0xfc0007fe
+#define INST_STRING_GEN_MASK 0xfc00067e
#define INST_LSWI 0x7c0004aa
#define INST_LSWX 0x7c00042a
#define INST_STSWI 0x7c0005aa
hpdp->pd = 0;
tlb->need_flush = 1;
pgtable_free_tlb(tlb, pgtable_free_cache(hugepte, HUGEPTE_CACHE_NUM,
- HUGEPTE_TABLE_SIZE-1));
+ PGF_CACHENUM_MASK));
}
#ifdef CONFIG_PPC_64K_PAGES
config MPC85xx_CDS
bool "Freescale MPC85xx CDS"
select DEFAULT_UIMAGE
- select PPC_I8259 if PCI
help
This option enables support for the MPC85xx CDS board
unsigned long isa_mem_base = 0;
#endif
-/*
- * Internal interrupts are all Level Sensitive, and Positive Polarity
- *
- * Note: Likely, this table and the following function should be
- * obtained and derived from the OF Device Tree.
- */
-static u_char mpc85xx_ads_openpic_initsenses[] __initdata = {
- MPC85XX_INTERNAL_IRQ_SENSES,
- 0x0, /* External 0: */
-#if defined(CONFIG_PCI)
- (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* Ext 1: PCI slot 0 */
- (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* Ext 2: PCI slot 1 */
- (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* Ext 3: PCI slot 2 */
- (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* Ext 4: PCI slot 3 */
-#else
- 0x0, /* External 1: */
- 0x0, /* External 2: */
- 0x0, /* External 3: */
- 0x0, /* External 4: */
-#endif
- (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* External 5: PHY */
- 0x0, /* External 6: */
- (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* External 7: PHY */
- 0x0, /* External 8: */
- 0x0, /* External 9: */
- 0x0, /* External 10: */
- 0x0, /* External 11: */
-};
-
#ifdef CONFIG_PCI
-/*
- * interrupt routing
- */
-
-int
-mpc85xx_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin)
-{
- static char pci_irq_table[][4] =
- /*
- * This is little evil, but works around the fact
- * that revA boards have IDSEL starting at 18
- * and others boards (older) start at 12
- *
- * PCI IDSEL/INTPIN->INTLINE
- * A B C D
- */
- {
- {PIRQA, PIRQB, PIRQC, PIRQD}, /* IDSEL 2 */
- {PIRQD, PIRQA, PIRQB, PIRQC},
- {PIRQC, PIRQD, PIRQA, PIRQB},
- {PIRQB, PIRQC, PIRQD, PIRQA}, /* IDSEL 5 */
- {0, 0, 0, 0}, /* -- */
- {0, 0, 0, 0}, /* -- */
- {0, 0, 0, 0}, /* -- */
- {0, 0, 0, 0}, /* -- */
- {0, 0, 0, 0}, /* -- */
- {0, 0, 0, 0}, /* -- */
- {PIRQA, PIRQB, PIRQC, PIRQD}, /* IDSEL 12 */
- {PIRQD, PIRQA, PIRQB, PIRQC},
- {PIRQC, PIRQD, PIRQA, PIRQB},
- {PIRQB, PIRQC, PIRQD, PIRQA}, /* IDSEL 15 */
- {0, 0, 0, 0}, /* -- */
- {0, 0, 0, 0}, /* -- */
- {PIRQA, PIRQB, PIRQC, PIRQD}, /* IDSEL 18 */
- {PIRQD, PIRQA, PIRQB, PIRQC},
- {PIRQC, PIRQD, PIRQA, PIRQB},
- {PIRQB, PIRQC, PIRQD, PIRQA}, /* IDSEL 21 */
- };
-
- const long min_idsel = 2, max_idsel = 21, irqs_per_slot = 4;
- return PCI_IRQ_TABLE_LOOKUP;
-}
-
int
mpc85xx_exclude_device(u_char bus, u_char devfn)
{
return PCIBIOS_SUCCESSFUL;
}
+void __init
+mpc85xx_pcibios_fixup(void)
+{
+ struct pci_dev *dev = NULL;
+
+ for_each_pci_dev(dev)
+ pci_read_irq_line(dev);
+}
#endif /* CONFIG_PCI */
void __init mpc85xx_ads_pic_init(void)
{
- struct mpic *mpic1;
- phys_addr_t OpenPIC_PAddr;
-
- /* Determine the Physical Address of the OpenPIC regs */
- OpenPIC_PAddr = get_immrbase() + MPC85xx_OPENPIC_OFFSET;
-
- mpic1 = mpic_alloc(OpenPIC_PAddr,
- MPIC_PRIMARY | MPIC_WANTS_RESET | MPIC_BIG_ENDIAN,
- 4, MPC85xx_OPENPIC_IRQ_OFFSET, 0, 250,
- mpc85xx_ads_openpic_initsenses,
- sizeof(mpc85xx_ads_openpic_initsenses),
- " OpenPIC ");
- BUG_ON(mpic1 == NULL);
- mpic_assign_isu(mpic1, 0, OpenPIC_PAddr + 0x10200);
- mpic_assign_isu(mpic1, 1, OpenPIC_PAddr + 0x10280);
- mpic_assign_isu(mpic1, 2, OpenPIC_PAddr + 0x10300);
- mpic_assign_isu(mpic1, 3, OpenPIC_PAddr + 0x10380);
- mpic_assign_isu(mpic1, 4, OpenPIC_PAddr + 0x10400);
- mpic_assign_isu(mpic1, 5, OpenPIC_PAddr + 0x10480);
- mpic_assign_isu(mpic1, 6, OpenPIC_PAddr + 0x10500);
- mpic_assign_isu(mpic1, 7, OpenPIC_PAddr + 0x10580);
-
- /* dummy mappings to get to 48 */
- mpic_assign_isu(mpic1, 8, OpenPIC_PAddr + 0x10600);
- mpic_assign_isu(mpic1, 9, OpenPIC_PAddr + 0x10680);
- mpic_assign_isu(mpic1, 10, OpenPIC_PAddr + 0x10700);
- mpic_assign_isu(mpic1, 11, OpenPIC_PAddr + 0x10780);
-
- /* External ints */
- mpic_assign_isu(mpic1, 12, OpenPIC_PAddr + 0x10000);
- mpic_assign_isu(mpic1, 13, OpenPIC_PAddr + 0x10080);
- mpic_assign_isu(mpic1, 14, OpenPIC_PAddr + 0x10100);
- mpic_init(mpic1);
+ struct mpic *mpic;
+ struct resource r;
+ struct device_node *np = NULL;
+
+ np = of_find_node_by_type(np, "open-pic");
+
+ if (np == NULL) {
+ printk(KERN_ERR "Could not find open-pic node\n");
+ return;
+ }
+
+ if(of_address_to_resource(np, 0, &r)) {
+ printk(KERN_ERR "Could not map mpic register space\n");
+ of_node_put(np);
+ return;
+ }
+
+ mpic = mpic_alloc(np, r.start,
+ MPIC_PRIMARY | MPIC_WANTS_RESET | MPIC_BIG_ENDIAN,
+ 4, 0, " OpenPIC ");
+ BUG_ON(mpic == NULL);
+ of_node_put(np);
+
+ mpic_assign_isu(mpic, 0, r.start + 0x10200);
+ mpic_assign_isu(mpic, 1, r.start + 0x10280);
+ mpic_assign_isu(mpic, 2, r.start + 0x10300);
+ mpic_assign_isu(mpic, 3, r.start + 0x10380);
+ mpic_assign_isu(mpic, 4, r.start + 0x10400);
+ mpic_assign_isu(mpic, 5, r.start + 0x10480);
+ mpic_assign_isu(mpic, 6, r.start + 0x10500);
+ mpic_assign_isu(mpic, 7, r.start + 0x10580);
+
+ /* Unused on this platform (leave room for 8548) */
+ mpic_assign_isu(mpic, 8, r.start + 0x10600);
+ mpic_assign_isu(mpic, 9, r.start + 0x10680);
+ mpic_assign_isu(mpic, 10, r.start + 0x10700);
+ mpic_assign_isu(mpic, 11, r.start + 0x10780);
+
+ /* External Interrupts */
+ mpic_assign_isu(mpic, 12, r.start + 0x10000);
+ mpic_assign_isu(mpic, 13, r.start + 0x10080);
+ mpic_assign_isu(mpic, 14, r.start + 0x10100);
+
+ mpic_init(mpic);
}
/*
static void __init mpc85xx_ads_setup_arch(void)
{
struct device_node *cpu;
+#ifdef CONFIG_PCI
struct device_node *np;
+#endif
if (ppc_md.progress)
ppc_md.progress("mpc85xx_ads_setup_arch()", 0);
for (np = NULL; (np = of_find_node_by_type(np, "pci")) != NULL;)
add_bridge(np);
- ppc_md.pci_swizzle = common_swizzle;
- ppc_md.pci_map_irq = mpc85xx_map_irq;
+ ppc_md.pcibios_fixup = mpc85xx_pcibios_fixup;
ppc_md.pci_exclude_device = mpc85xx_exclude_device;
#endif
static int cds_pci_slot = 2;
static volatile u8 *cadmus;
-/*
- * Internal interrupts are all Level Sensitive, and Positive Polarity
- *
- * Note: Likely, this table and the following function should be
- * obtained and derived from the OF Device Tree.
- */
-static u_char mpc85xx_cds_openpic_initsenses[] __initdata = {
- MPC85XX_INTERNAL_IRQ_SENSES,
-#if defined(CONFIG_PCI)
- (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Ext 0: PCI slot 0 */
- (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* Ext 1: PCI slot 1 */
- (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* Ext 2: PCI slot 2 */
- (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* Ext 3: PCI slot 3 */
-#else
- 0x0, /* External 0: */
- 0x0, /* External 1: */
- 0x0, /* External 2: */
- 0x0, /* External 3: */
-#endif
- (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* External 5: PHY */
- 0x0, /* External 6: */
- 0x0, /* External 7: */
- 0x0, /* External 8: */
- 0x0, /* External 9: */
- 0x0, /* External 10: */
-#ifdef CONFIG_PCI
- (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* Ext 11: PCI2 slot 0 */
-#else
- 0x0, /* External 11: */
-#endif
-};
-
#ifdef CONFIG_PCI
-/*
- * interrupt routing
- */
-int
-mpc85xx_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin)
-{
- struct pci_controller *hose = pci_bus_to_hose(dev->bus->number);
-
- if (!hose->index)
- {
- /* Handle PCI1 interrupts */
- char pci_irq_table[][4] =
- /*
- * PCI IDSEL/INTPIN->INTLINE
- * A B C D
- */
-
- /* Note IRQ assignment for slots is based on which slot the elysium is
- * in -- in this setup elysium is in slot #2 (this PIRQA as first
- * interrupt on slot */
- {
- { 0, 1, 2, 3 }, /* 16 - PMC */
- { 0, 1, 2, 3 }, /* 17 P2P (Tsi320) */
- { 0, 1, 2, 3 }, /* 18 - Slot 1 */
- { 1, 2, 3, 0 }, /* 19 - Slot 2 */
- { 2, 3, 0, 1 }, /* 20 - Slot 3 */
- { 3, 0, 1, 2 }, /* 21 - Slot 4 */
- };
-
- const long min_idsel = 16, max_idsel = 21, irqs_per_slot = 4;
- int i, j;
-
- for (i = 0; i < 6; i++)
- for (j = 0; j < 4; j++)
- pci_irq_table[i][j] =
- ((pci_irq_table[i][j] + 5 -
- cds_pci_slot) & 0x3) + PIRQ0A;
-
- return PCI_IRQ_TABLE_LOOKUP;
- } else {
- /* Handle PCI2 interrupts (if we have one) */
- char pci_irq_table[][4] =
- {
- /*
- * We only have one slot and one interrupt
- * going to PIRQA - PIRQD */
- { PIRQ1A, PIRQ1A, PIRQ1A, PIRQ1A }, /* 21 - slot 0 */
- };
-
- const long min_idsel = 21, max_idsel = 21, irqs_per_slot = 4;
-
- return PCI_IRQ_TABLE_LOOKUP;
- }
-}
#define ARCADIA_HOST_BRIDGE_IDSEL 17
#define ARCADIA_2ND_BRIDGE_IDSEL 3
pci_write_config_byte(dev, PCI_INTERRUPT_LINE, 11);
pci_dev_put(dev);
}
+
+ /* Now map all the PCI irqs */
+ dev = NULL;
+ for_each_pci_dev(dev)
+ pci_read_irq_line(dev);
+}
+
+#ifdef CONFIG_PPC_I8259
+#warning The i8259 PIC support is currently broken
+static void mpc85xx_8259_cascade(unsigned int irq, struct
+ irq_desc *desc, struct pt_regs *regs)
+{
+ unsigned int cascade_irq = i8259_irq(regs);
+
+ if (cascade_irq != NO_IRQ)
+ generic_handle_irq(cascade_irq, regs);
+
+ desc->chip->eoi(irq);
}
+#endif /* PPC_I8259 */
#endif /* CONFIG_PCI */
void __init mpc85xx_cds_pic_init(void)
{
- struct mpic *mpic1;
- phys_addr_t OpenPIC_PAddr;
+ struct mpic *mpic;
+ struct resource r;
+ struct device_node *np = NULL;
+ struct device_node *cascade_node = NULL;
+ int cascade_irq;
- /* Determine the Physical Address of the OpenPIC regs */
- OpenPIC_PAddr = get_immrbase() + MPC85xx_OPENPIC_OFFSET;
+ np = of_find_node_by_type(np, "open-pic");
+
+ if (np == NULL) {
+ printk(KERN_ERR "Could not find open-pic node\n");
+ return;
+ }
- mpic1 = mpic_alloc(OpenPIC_PAddr,
+ if (of_address_to_resource(np, 0, &r)) {
+ printk(KERN_ERR "Failed to map mpic register space\n");
+ of_node_put(np);
+ return;
+ }
+
+ mpic = mpic_alloc(np, r.start,
MPIC_PRIMARY | MPIC_WANTS_RESET | MPIC_BIG_ENDIAN,
- 4, MPC85xx_OPENPIC_IRQ_OFFSET, 0, 250,
- mpc85xx_cds_openpic_initsenses,
- sizeof(mpc85xx_cds_openpic_initsenses), " OpenPIC ");
- BUG_ON(mpic1 == NULL);
- mpic_assign_isu(mpic1, 0, OpenPIC_PAddr + 0x10200);
- mpic_assign_isu(mpic1, 1, OpenPIC_PAddr + 0x10280);
- mpic_assign_isu(mpic1, 2, OpenPIC_PAddr + 0x10300);
- mpic_assign_isu(mpic1, 3, OpenPIC_PAddr + 0x10380);
- mpic_assign_isu(mpic1, 4, OpenPIC_PAddr + 0x10400);
- mpic_assign_isu(mpic1, 5, OpenPIC_PAddr + 0x10480);
- mpic_assign_isu(mpic1, 6, OpenPIC_PAddr + 0x10500);
- mpic_assign_isu(mpic1, 7, OpenPIC_PAddr + 0x10580);
-
- /* dummy mappings to get to 48 */
- mpic_assign_isu(mpic1, 8, OpenPIC_PAddr + 0x10600);
- mpic_assign_isu(mpic1, 9, OpenPIC_PAddr + 0x10680);
- mpic_assign_isu(mpic1, 10, OpenPIC_PAddr + 0x10700);
- mpic_assign_isu(mpic1, 11, OpenPIC_PAddr + 0x10780);
-
- /* External ints */
- mpic_assign_isu(mpic1, 12, OpenPIC_PAddr + 0x10000);
- mpic_assign_isu(mpic1, 13, OpenPIC_PAddr + 0x10080);
- mpic_assign_isu(mpic1, 14, OpenPIC_PAddr + 0x10100);
-
- mpic_init(mpic1);
+ 4, 0, " OpenPIC ");
+ BUG_ON(mpic == NULL);
+
+ /* Return the mpic node */
+ of_node_put(np);
+
+ mpic_assign_isu(mpic, 0, r.start + 0x10200);
+ mpic_assign_isu(mpic, 1, r.start + 0x10280);
+ mpic_assign_isu(mpic, 2, r.start + 0x10300);
+ mpic_assign_isu(mpic, 3, r.start + 0x10380);
+ mpic_assign_isu(mpic, 4, r.start + 0x10400);
+ mpic_assign_isu(mpic, 5, r.start + 0x10480);
+ mpic_assign_isu(mpic, 6, r.start + 0x10500);
+ mpic_assign_isu(mpic, 7, r.start + 0x10580);
+
+ /* Used only for 8548 so far, but no harm in
+ * allocating them for everyone */
+ mpic_assign_isu(mpic, 8, r.start + 0x10600);
+ mpic_assign_isu(mpic, 9, r.start + 0x10680);
+ mpic_assign_isu(mpic, 10, r.start + 0x10700);
+ mpic_assign_isu(mpic, 11, r.start + 0x10780);
+
+ /* External Interrupts */
+ mpic_assign_isu(mpic, 12, r.start + 0x10000);
+ mpic_assign_isu(mpic, 13, r.start + 0x10080);
+ mpic_assign_isu(mpic, 14, r.start + 0x10100);
+
+ mpic_init(mpic);
+
+#ifdef CONFIG_PPC_I8259
+ /* Initialize the i8259 controller */
+ for_each_node_by_type(np, "interrupt-controller")
+ if (device_is_compatible(np, "chrp,iic")) {
+ cascade_node = np;
+ break;
+ }
+
+ if (cascade_node == NULL) {
+ printk(KERN_DEBUG "Could not find i8259 PIC\n");
+ return;
+ }
-#ifdef CONFIG_PCI
- mpic_setup_cascade(PIRQ0A, i8259_irq_cascade, NULL);
+ cascade_irq = irq_of_parse_and_map(cascade_node, 0);
+ if (cascade_irq == NO_IRQ) {
+ printk(KERN_ERR "Failed to map cascade interrupt\n");
+ return;
+ }
- i8259_init(0,0);
-#endif
+ i8259_init(cascade_node, 0);
+ of_node_put(cascade_node);
+
+ set_irq_chained_handler(cascade_irq, mpc85xx_8259_cascade);
+#endif /* CONFIG_PPC_I8259 */
}
add_bridge(np);
ppc_md.pcibios_fixup = mpc85xx_cds_pcibios_fixup;
- ppc_md.pci_swizzle = common_swizzle;
- ppc_md.pci_map_irq = mpc85xx_map_irq;
ppc_md.pci_exclude_device = mpc85xx_exclude_device;
#endif
{
struct mpic *mpic1;
struct device_node *np;
- phys_addr_t openpic_paddr;
+ struct resource res;
#ifdef CONFIG_PCI
struct device_node *cascade_node = NULL;
int cascade_irq;
#endif
+ /* Determine PIC address. */
np = of_find_node_by_type(NULL, "open-pic");
if (np == NULL)
return;
-
- /* Determine the Physical Address of the OpenPIC regs */
- openpic_paddr = get_immrbase() + MPC86xx_OPENPIC_OFFSET;
+ of_address_to_resource(np, 0, &res);
/* Alloc mpic structure and per isu has 16 INT entries. */
- mpic1 = mpic_alloc(np, openpic_paddr,
+ mpic1 = mpic_alloc(np, res.start,
MPIC_PRIMARY | MPIC_WANTS_RESET | MPIC_BIG_ENDIAN,
16, NR_IRQS - 4,
" MPIC ");
BUG_ON(mpic1 == NULL);
- mpic_assign_isu(mpic1, 0, openpic_paddr + 0x10000);
+ mpic_assign_isu(mpic1, 0, res.start + 0x10000);
/* 48 Internal Interrupts */
- mpic_assign_isu(mpic1, 1, openpic_paddr + 0x10200);
- mpic_assign_isu(mpic1, 2, openpic_paddr + 0x10400);
- mpic_assign_isu(mpic1, 3, openpic_paddr + 0x10600);
+ mpic_assign_isu(mpic1, 1, res.start + 0x10200);
+ mpic_assign_isu(mpic1, 2, res.start + 0x10400);
+ mpic_assign_isu(mpic1, 3, res.start + 0x10600);
/* 16 External interrupts
* Moving them from [0 - 15] to [64 - 79]
*/
- mpic_assign_isu(mpic1, 4, openpic_paddr + 0x10000);
+ mpic_assign_isu(mpic1, 4, res.start + 0x10000);
mpic_init(mpic1);
/*
* mpc7448_hpc2.c
*
- * Board setup routines for the Freescale Taiga platform
+ * Board setup routines for the Freescale mpc7448hpc2(taiga) platform
*
* Author: Jacob Pan
* jacob.pan@freescale.com
*
* Copyright 2004-2006 Freescale Semiconductor, Inc.
*
- * This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
*/
#include <linux/config.h>
extern int tsi108_setup_pci(struct device_node *dev);
extern void _nmask_and_or_msr(unsigned long nmask, unsigned long or_val);
extern void tsi108_pci_int_init(void);
-extern int tsi108_irq_cascade(struct pt_regs *regs, void *unused);
-
-/*
- * Define all of the IRQ senses and polarities. Taken from the
- * mpc7448hpc manual.
- * Note: Likely, this table and the following function should be
- * obtained and derived from the OF Device Tree.
- */
-
-static u_char mpc7448_hpc2_pic_initsenses[] __initdata = {
- /* External on-board sources */
- (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* INT[0] XINT0 from FPGA */
- (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* INT[1] XINT1 from FPGA */
- (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* INT[2] PHY_INT from both GIGE */
- (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* INT[3] RESERVED */
- /* Internal Tsi108/109 interrupt sources */
- (IRQ_SENSE_EDGE | IRQ_POLARITY_POSITIVE), /* Reserved IRQ */
- (IRQ_SENSE_EDGE | IRQ_POLARITY_POSITIVE), /* Reserved IRQ */
- (IRQ_SENSE_EDGE | IRQ_POLARITY_POSITIVE), /* Reserved IRQ */
- (IRQ_SENSE_EDGE | IRQ_POLARITY_POSITIVE), /* Reserved IRQ */
- (IRQ_SENSE_EDGE | IRQ_POLARITY_POSITIVE), /* DMA0 */
- (IRQ_SENSE_EDGE | IRQ_POLARITY_POSITIVE), /* DMA1 */
- (IRQ_SENSE_EDGE | IRQ_POLARITY_POSITIVE), /* DMA2 */
- (IRQ_SENSE_EDGE | IRQ_POLARITY_POSITIVE), /* DMA3 */
- (IRQ_SENSE_EDGE | IRQ_POLARITY_POSITIVE), /* UART0 */
- (IRQ_SENSE_EDGE | IRQ_POLARITY_POSITIVE), /* UART1 */
- (IRQ_SENSE_EDGE | IRQ_POLARITY_POSITIVE), /* I2C */
- (IRQ_SENSE_EDGE | IRQ_POLARITY_POSITIVE), /* GPIO */
- (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* GIGE0 */
- (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* GIGE1 */
- (IRQ_SENSE_EDGE | IRQ_POLARITY_POSITIVE), /* Reserved IRQ */
- (IRQ_SENSE_EDGE | IRQ_POLARITY_POSITIVE), /* HLP */
- (IRQ_SENSE_EDGE | IRQ_POLARITY_POSITIVE), /* SDC */
- (IRQ_SENSE_EDGE | IRQ_POLARITY_POSITIVE), /* Processor IF */
- (IRQ_SENSE_EDGE | IRQ_POLARITY_POSITIVE), /* Reserved IRQ */
- (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* PCI/X block */
-};
+extern void tsi108_irq_cascade(unsigned int irq, struct irq_desc *desc,
+ struct pt_regs *regs);
int mpc7448_hpc2_exclude_device(u_char bus, u_char devfn)
{
{
struct mpic *mpic;
phys_addr_t mpic_paddr = 0;
+ unsigned int cascade_pci_irq;
+ struct device_node *tsi_pci;
struct device_node *tsi_pic;
tsi_pic = of_find_node_by_type(NULL, "open-pic");
DBG("%s: tsi108pic phys_addr = 0x%x\n", __FUNCTION__,
(u32) mpic_paddr);
- mpic = mpic_alloc(mpic_paddr,
+ mpic = mpic_alloc(tsi_pic, mpic_paddr,
MPIC_PRIMARY | MPIC_BIG_ENDIAN | MPIC_WANTS_RESET |
MPIC_SPV_EOI | MPIC_MOD_ID(MPIC_ID_TSI108),
0, /* num_sources used */
- TSI108_IRQ_BASE,
0, /* num_sources used */
- NR_IRQS - 4 /* XXXX */,
- mpc7448_hpc2_pic_initsenses,
- sizeof(mpc7448_hpc2_pic_initsenses), "Tsi108_PIC");
+ "Tsi108_PIC");
BUG_ON(mpic == NULL); /* XXXX */
-
mpic_init(mpic);
- mpic_setup_cascade(IRQ_TSI108_PCI, tsi108_irq_cascade, mpic);
+
+ tsi_pci = of_find_node_by_type(NULL, "pci");
+ if (tsi_pci == 0) {
+ printk("%s: No tsi108 pci node found !\n", __FUNCTION__);
+ return;
+ }
+
+ cascade_pci_irq = irq_of_parse_and_map(tsi_pci, 0);
+ set_irq_data(cascade_pci_irq, mpic);
+ set_irq_chained_handler(cascade_pci_irq, tsi108_irq_cascade);
+
tsi108_pci_int_init();
/* Configure MPIC outputs to CPU0 */
tsi108_write_reg(TSI108_MPIC_OFFSET + 0x30c, 0);
+ of_node_put(tsi_pic);
}
void mpc7448_hpc2_show_cpuinfo(struct seq_file *m)
return 0;
}
+
define_machine(mpc7448_hpc2){
.name = "MPC7448 HPC2",
.probe = mpc7448_hpc2_probe,
DBG("End of boot params: %x\n", mem_end);
rsvmap[0] = mem_start;
rsvmap[1] = mem_end;
- rsvmap[2] = 0;
- rsvmap[3] = 0;
+ if (bootx_info->ramDisk) {
+ rsvmap[2] = ((unsigned long)bootx_info) + bootx_info->ramDisk;
+ rsvmap[3] = rsvmap[2] + bootx_info->ramDiskSize;
+ rsvmap[4] = 0;
+ rsvmap[5] = 0;
+ } else {
+ rsvmap[2] = 0;
+ rsvmap[3] = 0;
+ }
return (unsigned long)hdr;
}
*/
if (bi->version < 5) {
space = bi->deviceTreeOffset + bi->deviceTreeSize;
- if (bi->ramDisk)
+ if (bi->ramDisk >= space)
space = bi->ramDisk + bi->ramDiskSize;
} else
space = bi->totalParamsSize;
- bootx_printf("Total space used by parameters & ramdisk: %x \n", space);
+ bootx_printf("Total space used by parameters & ramdisk: 0x%x \n", space);
/* New BootX will have flushed all TLBs and enters kernel with
* MMU switched OFF, so this should not be useful anymore.
goto err;
}
- mac_addr = get_property(np, "address", NULL);
- memcpy(gfar_data.mac_addr, mac_addr, 6);
+ mac_addr = get_property(np, "local-mac-address", NULL);
+ if (mac_addr == NULL)
+ mac_addr = get_property(np, "mac-address", NULL);
+ if (mac_addr == NULL) {
+ /* Obsolete */
+ mac_addr = get_property(np, "address", NULL);
+ }
+
+ if (mac_addr)
+ memcpy(gfar_data.mac_addr, mac_addr, 6);
if (model && !strcasecmp(model, "TSEC"))
gfar_data.device_flags =
goto err;
r[1].name = "tx";
- r[1].start = np->intrs[0].line;
- r[1].end = np->intrs[0].line;
+ r[1].start = irq_of_parse_and_map(np, 0);
+ r[1].end = irq_of_parse_and_map(np, 0);
r[1].flags = IORESOURCE_IRQ;
+ DBG("%s: name:start->end = %s:0x%lx-> 0x%lx\n",
+ __FUNCTION__,r[1].name, r[1].start, r[1].end);
tsi_eth_dev =
platform_device_register_simple("tsi-ethernet", i, &r[0],
- np->n_intrs + 1);
+ 1);
if (IS_ERR(tsi_eth_dev)) {
ret = PTR_ERR(tsi_eth_dev);
tsi_eth_data.regs = r[0].start;
tsi_eth_data.phyregs = res.start;
tsi_eth_data.phy = *phy_id;
- tsi_eth_data.irq_num = np->intrs[0].line;
+ tsi_eth_data.irq_num = irq_of_parse_and_map(np, 0);
of_node_put(phy);
ret =
platform_device_add_data(tsi_eth_dev, &tsi_eth_data,
#include <linux/irq.h>
#include <linux/interrupt.h>
-
#include <asm/byteorder.h>
#include <asm/io.h>
#include <asm/irq.h>
(hose)->ops = &tsi108_direct_pci_ops;
- printk(KERN_INFO "Found tsi108 PCI host bridge at 0x%08lx. "
+ printk(KERN_INFO "Found tsi108 PCI host bridge at 0x%08x. "
"Firmware bus number: %d->%d\n",
rsrc.start, hose->first_busno, hose->last_busno);
mb();
}
-static inline int get_pci_source(void)
+static inline unsigned int get_pci_source(void)
{
u_int temp = 0;
int irq = -1;
* Interrupt controller descriptor for cascaded PCI interrupt controller.
*/
-struct hw_interrupt_type tsi108_pci_irq = {
+static struct irq_chip tsi108_pci_irq = {
.typename = "tsi108_PCI_int",
- .enable = tsi108_pci_irq_enable,
- .disable = tsi108_pci_irq_disable,
+ .mask = tsi108_pci_irq_disable,
.ack = tsi108_pci_irq_ack,
.end = tsi108_pci_irq_end,
+ .unmask = tsi108_pci_irq_enable,
};
/*
DBG("Tsi108_pci_int_init: initializing PCI interrupts\n");
for (i = 0; i < NUM_PCI_IRQS; i++) {
- irq_desc[i + IRQ_PCI_INTAD_BASE].handler = &tsi108_pci_irq;
+ irq_desc[i + IRQ_PCI_INTAD_BASE].chip = &tsi108_pci_irq;
irq_desc[i + IRQ_PCI_INTAD_BASE].status |= IRQ_LEVEL;
}
init_pci_source();
}
-int tsi108_irq_cascade(struct pt_regs *regs, void *unused)
+void tsi108_irq_cascade(unsigned int irq, struct irq_desc *desc,
+ struct pt_regs *regs)
{
- return get_pci_source();
+ unsigned int cascade_irq = get_pci_source();
+ if (cascade_irq != NO_IRQ)
+ generic_handle_irq(cascade_irq, regs);
+ desc->chip->eoi(irq);
}
#endif
#ifndef __ASSEMBLY__
+#include <linux/cpumask.h>
#ifdef CONFIG_KEXEC
#define MAX_NOTE_BYTES 1024
-#ifdef __powerpc64__
extern void kexec_smp_wait(void); /* get and clear naca physid, wait for
master to copy new code to 0 */
extern int crashing_cpu;
{
return cpu_isset(cpu,cpus_in_sr);
}
-#endif /* __powerpc64 __ */
struct kimage;
struct pt_regs;
#define MCM_PORT_CONFIG_OFFSET 0x1010
/* Offset from CCSRBAR */
-#define MPC86xx_OPENPIC_OFFSET (0x40000)
#define MPC86xx_MCM_OFFSET (0x00000)
#define MPC86xx_MCM_SIZE (0x02000)
pte_free_kernel(page_address(ptepage));
}
-#define PGF_CACHENUM_MASK 0xf
+#define PGF_CACHENUM_MASK 0x3
typedef struct pgtable_free {
unsigned long val;
#define smp_read_barrier_depends() do { } while(0)
#endif /* CONFIG_SMP */
+/*
+ * This is a barrier which prevents following instructions from being
+ * started until the value of the argument x is known. For example, if
+ * x is a variable loaded from memory, this prevents following
+ * instructions from being executed until the load has been performed.
+ */
+#define data_barrier(x) \
+ asm volatile("twi 0,%0,0; isync" : : "r" (x) : "memory");
+
struct task_struct;
struct pt_regs;
/*
- * include/asm-ppc/tsi108.h
- *
* common routine and memory layout for Tundra TSI108(Grendel) host bridge
* memory controller.
*
* Author: Jacob Pan (jacob.pan@freescale.com)
* Alex Bounine (alexandreb@tundra.com)
- * 2004 (c) Freescale Semiconductor Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
+ *
+ * Copyright 2004-2006 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
*/
+
#ifndef __PPC_KERNEL_TSI108_H
#define __PPC_KERNEL_TSI108_H
--- /dev/null
+/*
+ * (C) Copyright 2005 Tundra Semiconductor Corp.
+ * Alex Bounine, <alexandreb at tundra.com).
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * definitions for interrupt controller initialization and external interrupt
+ * demultiplexing on TSI108EMU/SVB boards.
+ */
+
+#ifndef _ASM_PPC_TSI108_IRQ_H
+#define _ASM_PPC_TSI108_IRQ_H
+
+/*
+ * Tsi108 interrupts
+ */
+#ifndef TSI108_IRQ_REG_BASE
+#define TSI108_IRQ_REG_BASE 0
+#endif
+
+#define TSI108_IRQ(x) (TSI108_IRQ_REG_BASE + (x))
+
+#define TSI108_MAX_VECTORS (36 + 4) /* 36 sources + PCI INT demux */
+#define MAX_TASK_PRIO 0xF
+
+#define TSI108_IRQ_SPURIOUS (TSI108_MAX_VECTORS)
+
+#define DEFAULT_PRIO_LVL 10 /* initial priority level */
+
+/* Interrupt vectors assignment to external and internal
+ * sources of requests. */
+
+/* EXTERNAL INTERRUPT SOURCES */
+
+#define IRQ_TSI108_EXT_INT0 TSI108_IRQ(0) /* External Source at INT[0] */
+#define IRQ_TSI108_EXT_INT1 TSI108_IRQ(1) /* External Source at INT[1] */
+#define IRQ_TSI108_EXT_INT2 TSI108_IRQ(2) /* External Source at INT[2] */
+#define IRQ_TSI108_EXT_INT3 TSI108_IRQ(3) /* External Source at INT[3] */
+
+/* INTERNAL INTERRUPT SOURCES */
+
+#define IRQ_TSI108_RESERVED0 TSI108_IRQ(4) /* Reserved IRQ */
+#define IRQ_TSI108_RESERVED1 TSI108_IRQ(5) /* Reserved IRQ */
+#define IRQ_TSI108_RESERVED2 TSI108_IRQ(6) /* Reserved IRQ */
+#define IRQ_TSI108_RESERVED3 TSI108_IRQ(7) /* Reserved IRQ */
+#define IRQ_TSI108_DMA0 TSI108_IRQ(8) /* DMA0 */
+#define IRQ_TSI108_DMA1 TSI108_IRQ(9) /* DMA1 */
+#define IRQ_TSI108_DMA2 TSI108_IRQ(10) /* DMA2 */
+#define IRQ_TSI108_DMA3 TSI108_IRQ(11) /* DMA3 */
+#define IRQ_TSI108_UART0 TSI108_IRQ(12) /* UART0 */
+#define IRQ_TSI108_UART1 TSI108_IRQ(13) /* UART1 */
+#define IRQ_TSI108_I2C TSI108_IRQ(14) /* I2C */
+#define IRQ_TSI108_GPIO TSI108_IRQ(15) /* GPIO */
+#define IRQ_TSI108_GIGE0 TSI108_IRQ(16) /* GIGE0 */
+#define IRQ_TSI108_GIGE1 TSI108_IRQ(17) /* GIGE1 */
+#define IRQ_TSI108_RESERVED4 TSI108_IRQ(18) /* Reserved IRQ */
+#define IRQ_TSI108_HLP TSI108_IRQ(19) /* HLP */
+#define IRQ_TSI108_SDRAM TSI108_IRQ(20) /* SDC */
+#define IRQ_TSI108_PROC_IF TSI108_IRQ(21) /* Processor IF */
+#define IRQ_TSI108_RESERVED5 TSI108_IRQ(22) /* Reserved IRQ */
+#define IRQ_TSI108_PCI TSI108_IRQ(23) /* PCI/X block */
+
+#define IRQ_TSI108_MBOX0 TSI108_IRQ(24) /* Mailbox 0 register */
+#define IRQ_TSI108_MBOX1 TSI108_IRQ(25) /* Mailbox 1 register */
+#define IRQ_TSI108_MBOX2 TSI108_IRQ(26) /* Mailbox 2 register */
+#define IRQ_TSI108_MBOX3 TSI108_IRQ(27) /* Mailbox 3 register */
+
+#define IRQ_TSI108_DBELL0 TSI108_IRQ(28) /* Doorbell 0 */
+#define IRQ_TSI108_DBELL1 TSI108_IRQ(29) /* Doorbell 1 */
+#define IRQ_TSI108_DBELL2 TSI108_IRQ(30) /* Doorbell 2 */
+#define IRQ_TSI108_DBELL3 TSI108_IRQ(31) /* Doorbell 3 */
+
+#define IRQ_TSI108_TIMER0 TSI108_IRQ(32) /* Global Timer 0 */
+#define IRQ_TSI108_TIMER1 TSI108_IRQ(33) /* Global Timer 1 */
+#define IRQ_TSI108_TIMER2 TSI108_IRQ(34) /* Global Timer 2 */
+#define IRQ_TSI108_TIMER3 TSI108_IRQ(35) /* Global Timer 3 */
+
+/*
+ * PCI bus INTA# - INTD# lines demultiplexor
+ */
+#define IRQ_PCI_INTAD_BASE TSI108_IRQ(36)
+#define IRQ_PCI_INTA (IRQ_PCI_INTAD_BASE + 0)
+#define IRQ_PCI_INTB (IRQ_PCI_INTAD_BASE + 1)
+#define IRQ_PCI_INTC (IRQ_PCI_INTAD_BASE + 2)
+#define IRQ_PCI_INTD (IRQ_PCI_INTAD_BASE + 3)
+#define NUM_PCI_IRQS (4)
+
+/* number of entries in vector dispatch table */
+#define IRQ_TSI108_TAB_SIZE (TSI108_MAX_VECTORS + 1)
+
+/* Mapping of MPIC outputs to processors' interrupt pins */
+
+#define IDIR_INT_OUT0 0x1
+#define IDIR_INT_OUT1 0x2
+#define IDIR_INT_OUT2 0x4
+#define IDIR_INT_OUT3 0x8
+
+/*---------------------------------------------------------------
+ * IRQ line configuration parameters */
+
+/* Interrupt delivery modes */
+typedef enum {
+ TSI108_IRQ_DIRECTED,
+ TSI108_IRQ_DISTRIBUTED,
+} TSI108_IRQ_MODE;
+#endif /* _ASM_PPC_TSI108_IRQ_H */
projects / powerpc.git / commitdiff