arm64: dts: renesas: r8a7795: Add missing SYS-DMAC2 dmas
authorGeert Uytterhoeven <geert+renesas@glider.be>
Mon, 12 Mar 2018 14:24:14 +0000 (15:24 +0100)
committerSimon Horman <horms+renesas@verge.net.au>
Tue, 13 Mar 2018 18:43:04 +0000 (19:43 +0100)
On R-Car H3, on-chip peripheral modules that can make use of DMA are
wired to either SYS-DMAC0 only, or to both SYS-DMAC1 and SYS-DMAC2.

Add the missing DMA properties pointing to SYS-DMAC2 for HSCIF[0-2],
SCIF[0125], and I2C[0-2].  These were initially left out because early
firmware versions prohibited using SYS-DMAC2.  This restriction has been
lifted in IPL and Secure Monitor Rev1.0.6 (released on Feb 25, 2016).

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
arch/arm64/boot/dts/renesas/r8a7795.dtsi

index 0648fe4..1d5e3ac 100644 (file)
                                 <&cpg CPG_CORE R8A7795_CLK_S3D1>,
                                 <&scif_clk>;
                        clock-names = "fck", "brg_int", "scif_clk";
-                       dmas = <&dmac1 0x31>, <&dmac1 0x30>;
-                       dma-names = "tx", "rx";
+                       dmas = <&dmac1 0x31>, <&dmac1 0x30>,
+                              <&dmac2 0x31>, <&dmac2 0x30>;
+                       dma-names = "tx", "rx", "tx", "rx";
                        power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
                        resets = <&cpg 520>;
                        status = "disabled";
                                 <&cpg CPG_CORE R8A7795_CLK_S3D1>,
                                 <&scif_clk>;
                        clock-names = "fck", "brg_int", "scif_clk";
-                       dmas = <&dmac1 0x33>, <&dmac1 0x32>;
-                       dma-names = "tx", "rx";
+                       dmas = <&dmac1 0x33>, <&dmac1 0x32>,
+                              <&dmac2 0x33>, <&dmac2 0x32>;
+                       dma-names = "tx", "rx", "tx", "rx";
                        power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
                        resets = <&cpg 519>;
                        status = "disabled";
                                 <&cpg CPG_CORE R8A7795_CLK_S3D1>,
                                 <&scif_clk>;
                        clock-names = "fck", "brg_int", "scif_clk";
-                       dmas = <&dmac1 0x35>, <&dmac1 0x34>;
-                       dma-names = "tx", "rx";
+                       dmas = <&dmac1 0x35>, <&dmac1 0x34>,
+                              <&dmac2 0x35>, <&dmac2 0x34>;
+                       dma-names = "tx", "rx", "tx", "rx";
                        power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
                        resets = <&cpg 518>;
                        status = "disabled";
                                 <&cpg CPG_CORE R8A7795_CLK_S3D1>,
                                 <&scif_clk>;
                        clock-names = "fck", "brg_int", "scif_clk";
-                       dmas = <&dmac1 0x51>, <&dmac1 0x50>;
-                       dma-names = "tx", "rx";
+                       dmas = <&dmac1 0x51>, <&dmac1 0x50>,
+                              <&dmac2 0x51>, <&dmac2 0x50>;
+                       dma-names = "tx", "rx", "tx", "rx";
                        power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
                        resets = <&cpg 207>;
                        status = "disabled";
                                 <&cpg CPG_CORE R8A7795_CLK_S3D1>,
                                 <&scif_clk>;
                        clock-names = "fck", "brg_int", "scif_clk";
-                       dmas = <&dmac1 0x53>, <&dmac1 0x52>;
-                       dma-names = "tx", "rx";
+                       dmas = <&dmac1 0x53>, <&dmac1 0x52>,
+                              <&dmac2 0x53>, <&dmac2 0x52>;
+                       dma-names = "tx", "rx", "tx", "rx";
                        power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
                        resets = <&cpg 206>;
                        status = "disabled";
                                 <&cpg CPG_CORE R8A7795_CLK_S3D1>,
                                 <&scif_clk>;
                        clock-names = "fck", "brg_int", "scif_clk";
-                       dmas = <&dmac1 0x13>, <&dmac1 0x12>;
-                       dma-names = "tx", "rx";
+                       dmas = <&dmac1 0x13>, <&dmac1 0x12>,
+                              <&dmac2 0x13>, <&dmac2 0x12>;
+                       dma-names = "tx", "rx", "tx", "rx";
                        power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
                        resets = <&cpg 310>;
                        status = "disabled";
                                 <&cpg CPG_CORE R8A7795_CLK_S3D1>,
                                 <&scif_clk>;
                        clock-names = "fck", "brg_int", "scif_clk";
-                       dmas = <&dmac1 0x5b>, <&dmac1 0x5a>;
-                       dma-names = "tx", "rx";
+                       dmas = <&dmac1 0x5b>, <&dmac1 0x5a>,
+                              <&dmac2 0x5b>, <&dmac2 0x5a>;
+                       dma-names = "tx", "rx", "tx", "rx";
                        power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
                        resets = <&cpg 202>;
                        status = "disabled";
                        clocks = <&cpg CPG_MOD 931>;
                        power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
                        resets = <&cpg 931>;
-                       dmas = <&dmac1 0x91>, <&dmac1 0x90>;
-                       dma-names = "tx", "rx";
+                       dmas = <&dmac1 0x91>, <&dmac1 0x90>,
+                              <&dmac2 0x91>, <&dmac2 0x90>;
+                       dma-names = "tx", "rx", "tx", "rx";
                        i2c-scl-internal-delay-ns = <110>;
                        status = "disabled";
                };
                        clocks = <&cpg CPG_MOD 930>;
                        power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
                        resets = <&cpg 930>;
-                       dmas = <&dmac1 0x93>, <&dmac1 0x92>;
-                       dma-names = "tx", "rx";
+                       dmas = <&dmac1 0x93>, <&dmac1 0x92>,
+                              <&dmac2 0x93>, <&dmac2 0x92>;
+                       dma-names = "tx", "rx", "tx", "rx";
                        i2c-scl-internal-delay-ns = <6>;
                        status = "disabled";
                };
                        clocks = <&cpg CPG_MOD 929>;
                        power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
                        resets = <&cpg 929>;
-                       dmas = <&dmac1 0x95>, <&dmac1 0x94>;
-                       dma-names = "tx", "rx";
+                       dmas = <&dmac1 0x95>, <&dmac1 0x94>,
+                              <&dmac2 0x95>, <&dmac2 0x94>;
+                       dma-names = "tx", "rx", "tx", "rx";
                        i2c-scl-internal-delay-ns = <6>;
                        status = "disabled";
                };