forcedeth: sideband management fix

This patch contains a fix that implements proper communication with the
sideband management unit. Also, it makes sure that the speed is
correctly set for gigabit phys in the case where sideband mgmt unit
initialized the phy. Refer to bug #7684 for more details.

Signed-Off-By: Ayaz Abdulla <aabdulla@nvidia.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

diff --git a/drivers/net/forcedeth.c b/drivers/net/forcedeth.c
index 2f48fe9..93f2b7a 100644 (file)
--- a/drivers/net/forcedeth.c
+++ b/drivers/net/forcedeth.c
@@ -234,6 +234,7 @@ enum {
 #define NVREG_XMITCTL_HOST_SEMA_MASK   0x0000f000
 #define NVREG_XMITCTL_HOST_SEMA_ACQ    0x0000f000
 #define NVREG_XMITCTL_HOST_LOADED      0x00004000
+#define NVREG_XMITCTL_TX_PATH_EN       0x01000000
        NvRegTransmitterStatus = 0x088,
 #define NVREG_XMITSTAT_BUSY    0x01
 
@@ -249,6 +250,7 @@ enum {
 #define NVREG_OFFLOAD_NORMAL   RX_NIC_BUFSIZE
        NvRegReceiverControl = 0x094,
 #define NVREG_RCVCTL_START     0x01
+#define NVREG_RCVCTL_RX_PATH_EN        0x01000000
        NvRegReceiverStatus = 0x98,
 #define NVREG_RCVSTAT_BUSY     0x01
 
@@ -1169,16 +1171,21 @@ static void nv_start_rx(struct net_device *dev)
 {
        struct fe_priv *np = netdev_priv(dev);
        u8 __iomem *base = get_hwbase(dev);
+       u32 rx_ctrl = readl(base + NvRegReceiverControl);
 
        dprintk(KERN_DEBUG "%s: nv_start_rx\n", dev->name);
        /* Already running? Stop it. */
-       if (readl(base + NvRegReceiverControl) & NVREG_RCVCTL_START) {
-               writel(0, base + NvRegReceiverControl);
+       if ((readl(base + NvRegReceiverControl) & NVREG_RCVCTL_START) && !np->mac_in_use) {
+               rx_ctrl &= ~NVREG_RCVCTL_START;
+               writel(rx_ctrl, base + NvRegReceiverControl);
                pci_push(base);
        }
        writel(np->linkspeed, base + NvRegLinkSpeed);
        pci_push(base);
-       writel(NVREG_RCVCTL_START, base + NvRegReceiverControl);
+        rx_ctrl |= NVREG_RCVCTL_START;
+        if (np->mac_in_use)
+               rx_ctrl &= ~NVREG_RCVCTL_RX_PATH_EN;
+       writel(rx_ctrl, base + NvRegReceiverControl);
        dprintk(KERN_DEBUG "%s: nv_start_rx to duplex %d, speed 0x%08x.\n",
                                dev->name, np->duplex, np->linkspeed);
        pci_push(base);
@@ -1186,39 +1193,59 @@ static void nv_start_rx(struct net_device *dev)
 
 static void nv_stop_rx(struct net_device *dev)
 {
+       struct fe_priv *np = netdev_priv(dev);
        u8 __iomem *base = get_hwbase(dev);
+       u32 rx_ctrl = readl(base + NvRegReceiverControl);
 
        dprintk(KERN_DEBUG "%s: nv_stop_rx\n", dev->name);
-       writel(0, base + NvRegReceiverControl);
+       if (!np->mac_in_use)
+               rx_ctrl &= ~NVREG_RCVCTL_START;
+       else
+               rx_ctrl |= NVREG_RCVCTL_RX_PATH_EN;
+       writel(rx_ctrl, base + NvRegReceiverControl);
        reg_delay(dev, NvRegReceiverStatus, NVREG_RCVSTAT_BUSY, 0,
                        NV_RXSTOP_DELAY1, NV_RXSTOP_DELAY1MAX,
                        KERN_INFO "nv_stop_rx: ReceiverStatus remained busy");
 
        udelay(NV_RXSTOP_DELAY2);
-       writel(0, base + NvRegLinkSpeed);
+       if (!np->mac_in_use)
+               writel(0, base + NvRegLinkSpeed);
 }
 
 static void nv_start_tx(struct net_device *dev)
 {
+       struct fe_priv *np = netdev_priv(dev);
        u8 __iomem *base = get_hwbase(dev);
+       u32 tx_ctrl = readl(base + NvRegTransmitterControl);
 
        dprintk(KERN_DEBUG "%s: nv_start_tx\n", dev->name);
-       writel(NVREG_XMITCTL_START, base + NvRegTransmitterControl);
+       tx_ctrl |= NVREG_XMITCTL_START;
+       if (np->mac_in_use)
+               tx_ctrl &= ~NVREG_XMITCTL_TX_PATH_EN;
+       writel(tx_ctrl, base + NvRegTransmitterControl);
        pci_push(base);
 }
 
 static void nv_stop_tx(struct net_device *dev)
 {
+       struct fe_priv *np = netdev_priv(dev);
        u8 __iomem *base = get_hwbase(dev);
+       u32 tx_ctrl = readl(base + NvRegTransmitterControl);
 
        dprintk(KERN_DEBUG "%s: nv_stop_tx\n", dev->name);
-       writel(0, base + NvRegTransmitterControl);
+       if (!np->mac_in_use)
+               tx_ctrl &= ~NVREG_XMITCTL_START;
+       else
+               tx_ctrl |= NVREG_XMITCTL_TX_PATH_EN;
+       writel(tx_ctrl, base + NvRegTransmitterControl);
        reg_delay(dev, NvRegTransmitterStatus, NVREG_XMITSTAT_BUSY, 0,
                        NV_TXSTOP_DELAY1, NV_TXSTOP_DELAY1MAX,
                        KERN_INFO "nv_stop_tx: TransmitterStatus remained busy");
 
        udelay(NV_TXSTOP_DELAY2);
-       writel(readl(base + NvRegTransmitPoll) & NVREG_TRANSMITPOLL_MAC_ADDR_REV, base + NvRegTransmitPoll);
+       if (!np->mac_in_use)
+               writel(readl(base + NvRegTransmitPoll) & NVREG_TRANSMITPOLL_MAC_ADDR_REV,
+                      base + NvRegTransmitPoll);
 }
 
 static void nv_txrx_reset(struct net_device *dev)
@@ -4148,20 +4175,6 @@ static int nv_mgmt_acquire_sema(struct net_device *dev)
        return 0;
 }
 
-/* Indicate to mgmt unit whether driver is loaded or not */
-static void nv_mgmt_driver_loaded(struct net_device *dev, int loaded)
-{
-       u8 __iomem *base = get_hwbase(dev);
-       u32 tx_ctrl;
-
-       tx_ctrl = readl(base + NvRegTransmitterControl);
-       if (loaded)
-               tx_ctrl |= NVREG_XMITCTL_HOST_LOADED;
-       else
-               tx_ctrl &= ~NVREG_XMITCTL_HOST_LOADED;
-       writel(tx_ctrl, base + NvRegTransmitterControl);
-}
-
 static int nv_open(struct net_device *dev)
 {
        struct fe_priv *np = netdev_priv(dev);
@@ -4659,33 +4672,24 @@ static int __devinit nv_probe(struct pci_dev *pci_dev, const struct pci_device_i
        writel(NVREG_MIISTAT_MASK, base + NvRegMIIStatus);
 
        if (id->driver_data & DEV_HAS_MGMT_UNIT) {
-               writel(0x1, base + 0x204); pci_push(base);
-               msleep(500);
                /* management unit running on the mac? */
-               np->mac_in_use = readl(base + NvRegTransmitterControl) & NVREG_XMITCTL_MGMT_ST;
-               if (np->mac_in_use) {
-                       u32 mgmt_sync;
-                       /* management unit setup the phy already? */
-                       mgmt_sync = readl(base + NvRegTransmitterControl) & NVREG_XMITCTL_SYNC_MASK;
-                       if (mgmt_sync == NVREG_XMITCTL_SYNC_NOT_READY) {
-                               if (!nv_mgmt_acquire_sema(dev)) {
-                                       for (i = 0; i < 5000; i++) {
-                                               msleep(1);
-                                               mgmt_sync = readl(base + NvRegTransmitterControl) & NVREG_XMITCTL_SYNC_MASK;
-                                               if (mgmt_sync == NVREG_XMITCTL_SYNC_NOT_READY)
-                                                       continue;
-                                               if (mgmt_sync == NVREG_XMITCTL_SYNC_PHY_INIT)
-                                                       phyinitialized = 1;
-                                               break;
+               if (readl(base + NvRegTransmitterControl) & NVREG_XMITCTL_SYNC_PHY_INIT) {
+                       np->mac_in_use = readl(base + NvRegTransmitterControl) & NVREG_XMITCTL_MGMT_ST;
+                       dprintk(KERN_INFO "%s: mgmt unit is running. mac in use %x.\n", pci_name(pci_dev), np->mac_in_use);
+                       for (i = 0; i < 5000; i++) {
+                               msleep(1);
+                               if (nv_mgmt_acquire_sema(dev)) {
+                                       /* management unit setup the phy already? */
+                                       if ((readl(base + NvRegTransmitterControl) & NVREG_XMITCTL_SYNC_MASK) ==
+                                           NVREG_XMITCTL_SYNC_PHY_INIT) {
+                                               /* phy is inited by mgmt unit */
+                                               phyinitialized = 1;
+                                               dprintk(KERN_INFO "%s: Phy already initialized by mgmt unit.\n", pci_name(pci_dev));
+                                       } else {
+                                               /* we need to init the phy */
                                        }
-                               } else {
-                                       /* we need to init the phy */
+                                       break;
                                }
-                       } else if (mgmt_sync == NVREG_XMITCTL_SYNC_PHY_INIT) {
-                               /* phy is inited by SMU */
-                               phyinitialized = 1;
-                       } else {
-                               /* we need to init the phy */
                        }
                }
        }
@@ -4724,10 +4728,12 @@ static int __devinit nv_probe(struct pci_dev *pci_dev, const struct pci_device_i
        if (!phyinitialized) {
                /* reset it */
                phy_init(dev);
-       }
-
-       if (id->driver_data & DEV_HAS_MGMT_UNIT) {
-               nv_mgmt_driver_loaded(dev, 1);
+       } else {
+               /* see if it is a gigabit phy */
+               u32 mii_status = mii_rw(dev, np->phyaddr, MII_BMSR, MII_READ);
+               if (mii_status & PHY_GIGABIT) {
+                       np->gigabit = PHY_GIGABIT;
+               }
        }
 
        /* set default link speed settings */
@@ -4749,8 +4755,6 @@ static int __devinit nv_probe(struct pci_dev *pci_dev, const struct pci_device_i
 out_error:
        if (phystate_orig)
                writel(phystate|NVREG_ADAPTCTL_RUNNING, base + NvRegAdapterControl);
-       if (np->mac_in_use)
-               nv_mgmt_driver_loaded(dev, 0);
        pci_set_drvdata(pci_dev, NULL);
 out_freering:
        free_rings(dev);
@@ -4780,9 +4784,6 @@ static void __devexit nv_remove(struct pci_dev *pci_dev)
        writel(np->orig_mac[0], base + NvRegMacAddrA);
        writel(np->orig_mac[1], base + NvRegMacAddrB);
 
-       if (np->mac_in_use)
-               nv_mgmt_driver_loaded(dev, 0);
-
        /* free all structures */
        free_rings(dev);
        iounmap(get_hwbase(dev));