From: eric miao Date: Wed, 21 Nov 2007 10:50:53 +0000 (+0800) Subject: [ARM] pxa: make pxa2xx_spi driver use ssp_request()/ssp_free() X-Git-Url: http://git.rot13.org/?a=commitdiff_plain;h=2f1a74e5a2de0459139b85af95e901448726c375;p=powerpc.git [ARM] pxa: make pxa2xx_spi driver use ssp_request()/ssp_free() 1. make pxa2xx_spi.c use ssp_request() and ssp_free() to get the common information of the designated SSP port. 2. remove those IRQ/memory request code, ssp_request() has done that for the driver 3. the SPI platform device is thus made psuedo, no resource (memory/IRQ) has to be defined, all will be retreived by ssp_request() 4. introduce ssp_get_clk_div() to handle controller difference in clock divisor setting 5. use clk_xxx() API for clock enable/disable, and clk_get_rate() to handle the different SSP clock frequency between different processors Signed-off-by: eric miao Signed-off-by: Russell King --- diff --git a/arch/arm/mach-pxa/lubbock.c b/arch/arm/mach-pxa/lubbock.c index 1d3112dc62..ebb73f1334 100644 --- a/arch/arm/mach-pxa/lubbock.c +++ b/arch/arm/mach-pxa/lubbock.c @@ -206,30 +206,13 @@ static struct resource smc91x_resources[] = { * (to J5) and poking board registers (as done below). Else it's only useful * for the temperature sensors. */ -static struct resource pxa_ssp_resources[] = { - [0] = { - .start = __PREG(SSCR0_P(1)), - .end = __PREG(SSCR0_P(1)) + 0x14, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = IRQ_SSP, - .end = IRQ_SSP, - .flags = IORESOURCE_IRQ, - }, -}; - static struct pxa2xx_spi_master pxa_ssp_master_info = { - .ssp_type = PXA25x_SSP, - .clock_enable = CKEN_SSP, .num_chipselect = 0, }; static struct platform_device pxa_ssp = { .name = "pxa2xx-spi", .id = 1, - .resource = pxa_ssp_resources, - .num_resources = ARRAY_SIZE(pxa_ssp_resources), .dev = { .platform_data = &pxa_ssp_master_info, }, diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig index abf05048c6..aaaea81e41 100644 --- a/drivers/spi/Kconfig +++ b/drivers/spi/Kconfig @@ -153,6 +153,7 @@ config SPI_OMAP24XX config SPI_PXA2XX tristate "PXA2xx SSP SPI master" depends on SPI_MASTER && ARCH_PXA && EXPERIMENTAL + select PXA_SSP help This enables using a PXA2xx SSP port as a SPI master controller. The driver can be configured to use any SSP port and additional diff --git a/drivers/spi/pxa2xx_spi.c b/drivers/spi/pxa2xx_spi.c index 0ac0f65f69..eb817b8eb0 100644 --- a/drivers/spi/pxa2xx_spi.c +++ b/drivers/spi/pxa2xx_spi.c @@ -27,6 +27,7 @@ #include #include #include +#include #include #include @@ -37,6 +38,7 @@ #include #include #include +#include #include MODULE_AUTHOR("Stephen Street"); @@ -81,6 +83,9 @@ struct driver_data { /* Driver model hookup */ struct platform_device *pdev; + /* SSP Info */ + struct ssp_device *ssp; + /* SPI framework hookup */ enum pxa_ssp_type ssp_type; struct spi_master *master; @@ -779,6 +784,16 @@ int set_dma_burst_and_threshold(struct chip_data *chip, struct spi_device *spi, return retval; } +static unsigned int ssp_get_clk_div(struct ssp_device *ssp, int rate) +{ + unsigned long ssp_clk = clk_get_rate(ssp->clk); + + if (ssp->type == PXA25x_SSP) + return ((ssp_clk / (2 * rate) - 1) & 0xff) << 8; + else + return ((ssp_clk / rate - 1) & 0xfff) << 8; +} + static void pump_transfers(unsigned long data) { struct driver_data *drv_data = (struct driver_data *)data; @@ -786,6 +801,7 @@ static void pump_transfers(unsigned long data) struct spi_transfer *transfer = NULL; struct spi_transfer *previous = NULL; struct chip_data *chip = NULL; + struct ssp_device *ssp = drv_data->ssp; void *reg = drv_data->ioaddr; u32 clk_div = 0; u8 bits = 0; @@ -867,12 +883,7 @@ static void pump_transfers(unsigned long data) if (transfer->bits_per_word) bits = transfer->bits_per_word; - if (reg == SSP1_VIRT) - clk_div = SSP1_SerClkDiv(speed); - else if (reg == SSP2_VIRT) - clk_div = SSP2_SerClkDiv(speed); - else if (reg == SSP3_VIRT) - clk_div = SSP3_SerClkDiv(speed); + clk_div = ssp_get_clk_div(ssp, speed); if (bits <= 8) { drv_data->n_bytes = 1; @@ -1075,6 +1086,7 @@ static int setup(struct spi_device *spi) struct pxa2xx_spi_chip *chip_info = NULL; struct chip_data *chip; struct driver_data *drv_data = spi_master_get_devdata(spi->master); + struct ssp_device *ssp = drv_data->ssp; unsigned int clk_div; if (!spi->bits_per_word) @@ -1158,18 +1170,7 @@ static int setup(struct spi_device *spi) } } - if (drv_data->ioaddr == SSP1_VIRT) - clk_div = SSP1_SerClkDiv(spi->max_speed_hz); - else if (drv_data->ioaddr == SSP2_VIRT) - clk_div = SSP2_SerClkDiv(spi->max_speed_hz); - else if (drv_data->ioaddr == SSP3_VIRT) - clk_div = SSP3_SerClkDiv(spi->max_speed_hz); - else - { - dev_err(&spi->dev, "failed setup: unknown IO address=0x%p\n", - drv_data->ioaddr); - return -ENODEV; - } + clk_div = ssp_get_clk_div(ssp, spi->max_speed_hz); chip->speed_hz = spi->max_speed_hz; chip->cr0 = clk_div @@ -1184,15 +1185,15 @@ static int setup(struct spi_device *spi) /* NOTE: PXA25x_SSP _could_ use external clocking ... */ if (drv_data->ssp_type != PXA25x_SSP) - dev_dbg(&spi->dev, "%d bits/word, %d Hz, mode %d\n", + dev_dbg(&spi->dev, "%d bits/word, %ld Hz, mode %d\n", spi->bits_per_word, - (CLOCK_SPEED_HZ) + clk_get_rate(ssp->clk) / (1 + ((chip->cr0 & SSCR0_SCR) >> 8)), spi->mode & 0x3); else - dev_dbg(&spi->dev, "%d bits/word, %d Hz, mode %d\n", + dev_dbg(&spi->dev, "%d bits/word, %ld Hz, mode %d\n", spi->bits_per_word, - (CLOCK_SPEED_HZ/2) + clk_get_rate(ssp->clk) / (1 + ((chip->cr0 & SSCR0_SCR) >> 8)), spi->mode & 0x3); @@ -1324,14 +1325,14 @@ static int __init pxa2xx_spi_probe(struct platform_device *pdev) struct pxa2xx_spi_master *platform_info; struct spi_master *master; struct driver_data *drv_data = 0; - struct resource *memory_resource; - int irq; + struct ssp_device *ssp; int status = 0; platform_info = dev->platform_data; - if (platform_info->ssp_type == SSP_UNDEFINED) { - dev_err(&pdev->dev, "undefined SSP\n"); + ssp = ssp_request(pdev->id, pdev->name); + if (ssp == NULL) { + dev_err(&pdev->dev, "failed to request SSP%d\n", pdev->id); return -ENODEV; } @@ -1339,12 +1340,14 @@ static int __init pxa2xx_spi_probe(struct platform_device *pdev) master = spi_alloc_master(dev, sizeof(struct driver_data) + 16); if (!master) { dev_err(&pdev->dev, "can not alloc spi_master\n"); + ssp_free(ssp); return -ENOMEM; } drv_data = spi_master_get_devdata(master); drv_data->master = master; drv_data->master_info = platform_info; drv_data->pdev = pdev; + drv_data->ssp = ssp; master->bus_num = pdev->id; master->num_chipselect = platform_info->num_chipselect; @@ -1352,21 +1355,13 @@ static int __init pxa2xx_spi_probe(struct platform_device *pdev) master->setup = setup; master->transfer = transfer; - drv_data->ssp_type = platform_info->ssp_type; + drv_data->ssp_type = ssp->type; drv_data->null_dma_buf = (u32 *)ALIGN((u32)(drv_data + sizeof(struct driver_data)), 8); - /* Setup register addresses */ - memory_resource = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!memory_resource) { - dev_err(&pdev->dev, "memory resources not defined\n"); - status = -ENODEV; - goto out_error_master_alloc; - } - - drv_data->ioaddr = (void *)io_p2v((unsigned long)(memory_resource->start)); - drv_data->ssdr_physical = memory_resource->start + 0x00000010; - if (platform_info->ssp_type == PXA25x_SSP) { + drv_data->ioaddr = ssp->mmio_base; + drv_data->ssdr_physical = ssp->phys_base + SSDR; + if (ssp->type == PXA25x_SSP) { drv_data->int_cr1 = SSCR1_TIE | SSCR1_RIE; drv_data->dma_cr1 = 0; drv_data->clear_sr = SSSR_ROR; @@ -1378,15 +1373,7 @@ static int __init pxa2xx_spi_probe(struct platform_device *pdev) drv_data->mask_sr = SSSR_TINT | SSSR_RFS | SSSR_TFS | SSSR_ROR; } - /* Attach to IRQ */ - irq = platform_get_irq(pdev, 0); - if (irq < 0) { - dev_err(&pdev->dev, "irq resource not defined\n"); - status = -ENODEV; - goto out_error_master_alloc; - } - - status = request_irq(irq, ssp_int, 0, dev->bus_id, drv_data); + status = request_irq(ssp->irq, ssp_int, 0, dev->bus_id, drv_data); if (status < 0) { dev_err(&pdev->dev, "can not get IRQ\n"); goto out_error_master_alloc; @@ -1419,29 +1406,12 @@ static int __init pxa2xx_spi_probe(struct platform_device *pdev) goto out_error_dma_alloc; } - if (drv_data->ioaddr == SSP1_VIRT) { - DRCMRRXSSDR = DRCMR_MAPVLD - | drv_data->rx_channel; - DRCMRTXSSDR = DRCMR_MAPVLD - | drv_data->tx_channel; - } else if (drv_data->ioaddr == SSP2_VIRT) { - DRCMRRXSS2DR = DRCMR_MAPVLD - | drv_data->rx_channel; - DRCMRTXSS2DR = DRCMR_MAPVLD - | drv_data->tx_channel; - } else if (drv_data->ioaddr == SSP3_VIRT) { - DRCMRRXSS3DR = DRCMR_MAPVLD - | drv_data->rx_channel; - DRCMRTXSS3DR = DRCMR_MAPVLD - | drv_data->tx_channel; - } else { - dev_err(dev, "bad SSP type\n"); - goto out_error_dma_alloc; - } + DRCMR(ssp->drcmr_rx) = DRCMR_MAPVLD | drv_data->rx_channel; + DRCMR(ssp->drcmr_tx) = DRCMR_MAPVLD | drv_data->tx_channel; } /* Enable SOC clock */ - pxa_set_cken(platform_info->clock_enable, 1); + clk_enable(ssp->clk); /* Load default SSP configuration */ write_SSCR0(0, drv_data->ioaddr); @@ -1480,7 +1450,7 @@ out_error_queue_alloc: destroy_queue(drv_data); out_error_clock_enabled: - pxa_set_cken(platform_info->clock_enable, 0); + clk_disable(ssp->clk); out_error_dma_alloc: if (drv_data->tx_channel != -1) @@ -1489,17 +1459,18 @@ out_error_dma_alloc: pxa_free_dma(drv_data->rx_channel); out_error_irq_alloc: - free_irq(irq, drv_data); + free_irq(ssp->irq, drv_data); out_error_master_alloc: spi_master_put(master); + ssp_free(ssp); return status; } static int pxa2xx_spi_remove(struct platform_device *pdev) { struct driver_data *drv_data = platform_get_drvdata(pdev); - int irq; + struct ssp_device *ssp = drv_data->ssp; int status = 0; if (!drv_data) @@ -1521,28 +1492,21 @@ static int pxa2xx_spi_remove(struct platform_device *pdev) /* Disable the SSP at the peripheral and SOC level */ write_SSCR0(0, drv_data->ioaddr); - pxa_set_cken(drv_data->master_info->clock_enable, 0); + clk_disable(ssp->clk); /* Release DMA */ if (drv_data->master_info->enable_dma) { - if (drv_data->ioaddr == SSP1_VIRT) { - DRCMRRXSSDR = 0; - DRCMRTXSSDR = 0; - } else if (drv_data->ioaddr == SSP2_VIRT) { - DRCMRRXSS2DR = 0; - DRCMRTXSS2DR = 0; - } else if (drv_data->ioaddr == SSP3_VIRT) { - DRCMRRXSS3DR = 0; - DRCMRTXSS3DR = 0; - } + DRCMR(ssp->drcmr_rx) = 0; + DRCMR(ssp->drcmr_tx) = 0; pxa_free_dma(drv_data->tx_channel); pxa_free_dma(drv_data->rx_channel); } /* Release IRQ */ - irq = platform_get_irq(pdev, 0); - if (irq >= 0) - free_irq(irq, drv_data); + free_irq(ssp->irq, drv_data); + + /* Release SSP */ + ssp_free(ssp); /* Disconnect from the SPI framework */ spi_unregister_master(drv_data->master); @@ -1577,6 +1541,7 @@ static int suspend_devices(struct device *dev, void *pm_message) static int pxa2xx_spi_suspend(struct platform_device *pdev, pm_message_t state) { struct driver_data *drv_data = platform_get_drvdata(pdev); + struct ssp_device *ssp = drv_data->ssp; int status = 0; /* Check all childern for current power state */ @@ -1589,7 +1554,7 @@ static int pxa2xx_spi_suspend(struct platform_device *pdev, pm_message_t state) if (status != 0) return status; write_SSCR0(0, drv_data->ioaddr); - pxa_set_cken(drv_data->master_info->clock_enable, 0); + clk_disable(ssp->clk); return 0; } @@ -1597,10 +1562,11 @@ static int pxa2xx_spi_suspend(struct platform_device *pdev, pm_message_t state) static int pxa2xx_spi_resume(struct platform_device *pdev) { struct driver_data *drv_data = platform_get_drvdata(pdev); + struct ssp_device *ssp = drv_data->ssp; int status = 0; /* Enable the SSP clock */ - pxa_set_cken(drv_data->master_info->clock_enable, 1); + clk_disable(ssp->clk); /* Start the queue running */ status = start_queue(drv_data); diff --git a/include/asm-arm/arch-pxa/pxa2xx_spi.h b/include/asm-arm/arch-pxa/pxa2xx_spi.h index acc7ec7a84..3459fb26ce 100644 --- a/include/asm-arm/arch-pxa/pxa2xx_spi.h +++ b/include/asm-arm/arch-pxa/pxa2xx_spi.h @@ -22,32 +22,8 @@ #define PXA2XX_CS_ASSERT (0x01) #define PXA2XX_CS_DEASSERT (0x02) -#if defined(CONFIG_PXA25x) -#define CLOCK_SPEED_HZ 3686400 -#define SSP1_SerClkDiv(x) (((CLOCK_SPEED_HZ/2/(x+1))<<8)&0x0000ff00) -#define SSP2_SerClkDiv(x) (((CLOCK_SPEED_HZ/(x+1))<<8)&0x000fff00) -#define SSP3_SerClkDiv(x) (((CLOCK_SPEED_HZ/(x+1))<<8)&0x000fff00) -#elif defined(CONFIG_PXA27x) -#define CLOCK_SPEED_HZ 13000000 -#define SSP1_SerClkDiv(x) (((CLOCK_SPEED_HZ/(x+1))<<8)&0x000fff00) -#define SSP2_SerClkDiv(x) (((CLOCK_SPEED_HZ/(x+1))<<8)&0x000fff00) -#define SSP3_SerClkDiv(x) (((CLOCK_SPEED_HZ/(x+1))<<8)&0x000fff00) -#endif - -#define SSP1_VIRT ((void *)(io_p2v(__PREG(SSCR0_P(1))))) -#define SSP2_VIRT ((void *)(io_p2v(__PREG(SSCR0_P(2))))) -#define SSP3_VIRT ((void *)(io_p2v(__PREG(SSCR0_P(3))))) - -enum pxa_ssp_type { - SSP_UNDEFINED = 0, - PXA25x_SSP, /* pxa 210, 250, 255, 26x */ - PXA25x_NSSP, /* pxa 255, 26x (including ASSP) */ - PXA27x_SSP, -}; - /* device.platform_data for SSP controller devices */ struct pxa2xx_spi_master { - enum pxa_ssp_type ssp_type; u32 clock_enable; u16 num_chipselect; u8 enable_dma;