From: Jeff Garzik Date: Tue, 19 Sep 2006 04:42:13 +0000 (-0400) Subject: Merge branch 'master' into upstream X-Git-Tag: v2.6.19-rc1~1262^2~3 X-Git-Url: http://git.rot13.org/?a=commitdiff_plain;h=4a3381feb823e06c8e2da7e283c17b0b6fdbddcf;p=powerpc.git Merge branch 'master' into upstream --- 4a3381feb823e06c8e2da7e283c17b0b6fdbddcf diff --cc drivers/ata/libata-core.c index bb66a12c84,0000000000..e85c2f8cf1 mode 100644,000000..100644 --- a/drivers/ata/libata-core.c +++ b/drivers/ata/libata-core.c @@@ -1,6151 -1,0 +1,6156 @@@ +/* + * libata-core.c - helper library for ATA + * + * Maintained by: Jeff Garzik + * Please ALWAYS copy linux-ide@vger.kernel.org + * on emails. + * + * Copyright 2003-2004 Red Hat, Inc. All rights reserved. + * Copyright 2003-2004 Jeff Garzik + * + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; see the file COPYING. If not, write to + * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. + * + * + * libata documentation is available via 'make {ps|pdf}docs', + * as Documentation/DocBook/libata.* + * + * Hardware documentation available from http://www.t13.org/ and + * http://www.sata-io.org/ + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "libata.h" + +/* debounce timing parameters in msecs { interval, duration, timeout } */ +const unsigned long sata_deb_timing_normal[] = { 5, 100, 2000 }; +const unsigned long sata_deb_timing_hotplug[] = { 25, 500, 2000 }; +const unsigned long sata_deb_timing_long[] = { 100, 2000, 5000 }; + +static unsigned int ata_dev_init_params(struct ata_device *dev, + u16 heads, u16 sectors); +static unsigned int ata_dev_set_xfermode(struct ata_device *dev); +static void ata_dev_xfermask(struct ata_device *dev); + +static unsigned int ata_unique_id = 1; +static struct workqueue_struct *ata_wq; + +struct workqueue_struct *ata_aux_wq; + +int atapi_enabled = 1; +module_param(atapi_enabled, int, 0444); +MODULE_PARM_DESC(atapi_enabled, "Enable discovery of ATAPI devices (0=off, 1=on)"); + +int atapi_dmadir = 0; +module_param(atapi_dmadir, int, 0444); +MODULE_PARM_DESC(atapi_dmadir, "Enable ATAPI DMADIR bridge support (0=off, 1=on)"); + +int libata_fua = 0; +module_param_named(fua, libata_fua, int, 0444); +MODULE_PARM_DESC(fua, "FUA support (0=off, 1=on)"); + +static int ata_probe_timeout = ATA_TMOUT_INTERNAL / HZ; +module_param(ata_probe_timeout, int, 0444); +MODULE_PARM_DESC(ata_probe_timeout, "Set ATA probing timeout (seconds)"); + +MODULE_AUTHOR("Jeff Garzik"); +MODULE_DESCRIPTION("Library module for ATA devices"); +MODULE_LICENSE("GPL"); +MODULE_VERSION(DRV_VERSION); + + +/** + * ata_tf_to_fis - Convert ATA taskfile to SATA FIS structure + * @tf: Taskfile to convert + * @fis: Buffer into which data will output + * @pmp: Port multiplier port + * + * Converts a standard ATA taskfile to a Serial ATA + * FIS structure (Register - Host to Device). + * + * LOCKING: + * Inherited from caller. + */ + +void ata_tf_to_fis(const struct ata_taskfile *tf, u8 *fis, u8 pmp) +{ + fis[0] = 0x27; /* Register - Host to Device FIS */ + fis[1] = (pmp & 0xf) | (1 << 7); /* Port multiplier number, + bit 7 indicates Command FIS */ + fis[2] = tf->command; + fis[3] = tf->feature; + + fis[4] = tf->lbal; + fis[5] = tf->lbam; + fis[6] = tf->lbah; + fis[7] = tf->device; + + fis[8] = tf->hob_lbal; + fis[9] = tf->hob_lbam; + fis[10] = tf->hob_lbah; + fis[11] = tf->hob_feature; + + fis[12] = tf->nsect; + fis[13] = tf->hob_nsect; + fis[14] = 0; + fis[15] = tf->ctl; + + fis[16] = 0; + fis[17] = 0; + fis[18] = 0; + fis[19] = 0; +} + +/** + * ata_tf_from_fis - Convert SATA FIS to ATA taskfile + * @fis: Buffer from which data will be input + * @tf: Taskfile to output + * + * Converts a serial ATA FIS structure to a standard ATA taskfile. + * + * LOCKING: + * Inherited from caller. + */ + +void ata_tf_from_fis(const u8 *fis, struct ata_taskfile *tf) +{ + tf->command = fis[2]; /* status */ + tf->feature = fis[3]; /* error */ + + tf->lbal = fis[4]; + tf->lbam = fis[5]; + tf->lbah = fis[6]; + tf->device = fis[7]; + + tf->hob_lbal = fis[8]; + tf->hob_lbam = fis[9]; + tf->hob_lbah = fis[10]; + + tf->nsect = fis[12]; + tf->hob_nsect = fis[13]; +} + +static const u8 ata_rw_cmds[] = { + /* pio multi */ + ATA_CMD_READ_MULTI, + ATA_CMD_WRITE_MULTI, + ATA_CMD_READ_MULTI_EXT, + ATA_CMD_WRITE_MULTI_EXT, + 0, + 0, + 0, + ATA_CMD_WRITE_MULTI_FUA_EXT, + /* pio */ + ATA_CMD_PIO_READ, + ATA_CMD_PIO_WRITE, + ATA_CMD_PIO_READ_EXT, + ATA_CMD_PIO_WRITE_EXT, + 0, + 0, + 0, + 0, + /* dma */ + ATA_CMD_READ, + ATA_CMD_WRITE, + ATA_CMD_READ_EXT, + ATA_CMD_WRITE_EXT, + 0, + 0, + 0, + ATA_CMD_WRITE_FUA_EXT +}; + +/** + * ata_rwcmd_protocol - set taskfile r/w commands and protocol + * @qc: command to examine and configure + * + * Examine the device configuration and tf->flags to calculate + * the proper read/write commands and protocol to use. + * + * LOCKING: + * caller. + */ +int ata_rwcmd_protocol(struct ata_queued_cmd *qc) +{ + struct ata_taskfile *tf = &qc->tf; + struct ata_device *dev = qc->dev; + u8 cmd; + + int index, fua, lba48, write; + + fua = (tf->flags & ATA_TFLAG_FUA) ? 4 : 0; + lba48 = (tf->flags & ATA_TFLAG_LBA48) ? 2 : 0; + write = (tf->flags & ATA_TFLAG_WRITE) ? 1 : 0; + + if (dev->flags & ATA_DFLAG_PIO) { + tf->protocol = ATA_PROT_PIO; + index = dev->multi_count ? 0 : 8; + } else if (lba48 && (qc->ap->flags & ATA_FLAG_PIO_LBA48)) { + /* Unable to use DMA due to host limitation */ + tf->protocol = ATA_PROT_PIO; + index = dev->multi_count ? 0 : 8; + } else { + tf->protocol = ATA_PROT_DMA; + index = 16; + } + + cmd = ata_rw_cmds[index + fua + lba48 + write]; + if (cmd) { + tf->command = cmd; + return 0; + } + return -1; +} + +/** + * ata_pack_xfermask - Pack pio, mwdma and udma masks into xfer_mask + * @pio_mask: pio_mask + * @mwdma_mask: mwdma_mask + * @udma_mask: udma_mask + * + * Pack @pio_mask, @mwdma_mask and @udma_mask into a single + * unsigned int xfer_mask. + * + * LOCKING: + * None. + * + * RETURNS: + * Packed xfer_mask. + */ +static unsigned int ata_pack_xfermask(unsigned int pio_mask, + unsigned int mwdma_mask, + unsigned int udma_mask) +{ + return ((pio_mask << ATA_SHIFT_PIO) & ATA_MASK_PIO) | + ((mwdma_mask << ATA_SHIFT_MWDMA) & ATA_MASK_MWDMA) | + ((udma_mask << ATA_SHIFT_UDMA) & ATA_MASK_UDMA); +} + +/** + * ata_unpack_xfermask - Unpack xfer_mask into pio, mwdma and udma masks + * @xfer_mask: xfer_mask to unpack + * @pio_mask: resulting pio_mask + * @mwdma_mask: resulting mwdma_mask + * @udma_mask: resulting udma_mask + * + * Unpack @xfer_mask into @pio_mask, @mwdma_mask and @udma_mask. + * Any NULL distination masks will be ignored. + */ +static void ata_unpack_xfermask(unsigned int xfer_mask, + unsigned int *pio_mask, + unsigned int *mwdma_mask, + unsigned int *udma_mask) +{ + if (pio_mask) + *pio_mask = (xfer_mask & ATA_MASK_PIO) >> ATA_SHIFT_PIO; + if (mwdma_mask) + *mwdma_mask = (xfer_mask & ATA_MASK_MWDMA) >> ATA_SHIFT_MWDMA; + if (udma_mask) + *udma_mask = (xfer_mask & ATA_MASK_UDMA) >> ATA_SHIFT_UDMA; +} + +static const struct ata_xfer_ent { + int shift, bits; + u8 base; +} ata_xfer_tbl[] = { + { ATA_SHIFT_PIO, ATA_BITS_PIO, XFER_PIO_0 }, + { ATA_SHIFT_MWDMA, ATA_BITS_MWDMA, XFER_MW_DMA_0 }, + { ATA_SHIFT_UDMA, ATA_BITS_UDMA, XFER_UDMA_0 }, + { -1, }, +}; + +/** + * ata_xfer_mask2mode - Find matching XFER_* for the given xfer_mask + * @xfer_mask: xfer_mask of interest + * + * Return matching XFER_* value for @xfer_mask. Only the highest + * bit of @xfer_mask is considered. + * + * LOCKING: + * None. + * + * RETURNS: + * Matching XFER_* value, 0 if no match found. + */ +static u8 ata_xfer_mask2mode(unsigned int xfer_mask) +{ + int highbit = fls(xfer_mask) - 1; + const struct ata_xfer_ent *ent; + + for (ent = ata_xfer_tbl; ent->shift >= 0; ent++) + if (highbit >= ent->shift && highbit < ent->shift + ent->bits) + return ent->base + highbit - ent->shift; + return 0; +} + +/** + * ata_xfer_mode2mask - Find matching xfer_mask for XFER_* + * @xfer_mode: XFER_* of interest + * + * Return matching xfer_mask for @xfer_mode. + * + * LOCKING: + * None. + * + * RETURNS: + * Matching xfer_mask, 0 if no match found. + */ +static unsigned int ata_xfer_mode2mask(u8 xfer_mode) +{ + const struct ata_xfer_ent *ent; + + for (ent = ata_xfer_tbl; ent->shift >= 0; ent++) + if (xfer_mode >= ent->base && xfer_mode < ent->base + ent->bits) + return 1 << (ent->shift + xfer_mode - ent->base); + return 0; +} + +/** + * ata_xfer_mode2shift - Find matching xfer_shift for XFER_* + * @xfer_mode: XFER_* of interest + * + * Return matching xfer_shift for @xfer_mode. + * + * LOCKING: + * None. + * + * RETURNS: + * Matching xfer_shift, -1 if no match found. + */ +static int ata_xfer_mode2shift(unsigned int xfer_mode) +{ + const struct ata_xfer_ent *ent; + + for (ent = ata_xfer_tbl; ent->shift >= 0; ent++) + if (xfer_mode >= ent->base && xfer_mode < ent->base + ent->bits) + return ent->shift; + return -1; +} + +/** + * ata_mode_string - convert xfer_mask to string + * @xfer_mask: mask of bits supported; only highest bit counts. + * + * Determine string which represents the highest speed + * (highest bit in @modemask). + * + * LOCKING: + * None. + * + * RETURNS: + * Constant C string representing highest speed listed in + * @mode_mask, or the constant C string "". + */ +static const char *ata_mode_string(unsigned int xfer_mask) +{ + static const char * const xfer_mode_str[] = { + "PIO0", + "PIO1", + "PIO2", + "PIO3", + "PIO4", + "PIO5", + "PIO6", + "MWDMA0", + "MWDMA1", + "MWDMA2", + "MWDMA3", + "MWDMA4", + "UDMA/16", + "UDMA/25", + "UDMA/33", + "UDMA/44", + "UDMA/66", + "UDMA/100", + "UDMA/133", + "UDMA7", + }; + int highbit; + + highbit = fls(xfer_mask) - 1; + if (highbit >= 0 && highbit < ARRAY_SIZE(xfer_mode_str)) + return xfer_mode_str[highbit]; + return ""; +} + +static const char *sata_spd_string(unsigned int spd) +{ + static const char * const spd_str[] = { + "1.5 Gbps", + "3.0 Gbps", + }; + + if (spd == 0 || (spd - 1) >= ARRAY_SIZE(spd_str)) + return ""; + return spd_str[spd - 1]; +} + +void ata_dev_disable(struct ata_device *dev) +{ + if (ata_dev_enabled(dev) && ata_msg_drv(dev->ap)) { + ata_dev_printk(dev, KERN_WARNING, "disabled\n"); + dev->class++; + } +} + +/** + * ata_pio_devchk - PATA device presence detection + * @ap: ATA channel to examine + * @device: Device to examine (starting at zero) + * + * This technique was originally described in + * Hale Landis's ATADRVR (www.ata-atapi.com), and + * later found its way into the ATA/ATAPI spec. + * + * Write a pattern to the ATA shadow registers, + * and if a device is present, it will respond by + * correctly storing and echoing back the + * ATA shadow register contents. + * + * LOCKING: + * caller. + */ + +static unsigned int ata_pio_devchk(struct ata_port *ap, + unsigned int device) +{ + struct ata_ioports *ioaddr = &ap->ioaddr; + u8 nsect, lbal; + + ap->ops->dev_select(ap, device); + + outb(0x55, ioaddr->nsect_addr); + outb(0xaa, ioaddr->lbal_addr); + + outb(0xaa, ioaddr->nsect_addr); + outb(0x55, ioaddr->lbal_addr); + + outb(0x55, ioaddr->nsect_addr); + outb(0xaa, ioaddr->lbal_addr); + + nsect = inb(ioaddr->nsect_addr); + lbal = inb(ioaddr->lbal_addr); + + if ((nsect == 0x55) && (lbal == 0xaa)) + return 1; /* we found a device */ + + return 0; /* nothing found */ +} + +/** + * ata_mmio_devchk - PATA device presence detection + * @ap: ATA channel to examine + * @device: Device to examine (starting at zero) + * + * This technique was originally described in + * Hale Landis's ATADRVR (www.ata-atapi.com), and + * later found its way into the ATA/ATAPI spec. + * + * Write a pattern to the ATA shadow registers, + * and if a device is present, it will respond by + * correctly storing and echoing back the + * ATA shadow register contents. + * + * LOCKING: + * caller. + */ + +static unsigned int ata_mmio_devchk(struct ata_port *ap, + unsigned int device) +{ + struct ata_ioports *ioaddr = &ap->ioaddr; + u8 nsect, lbal; + + ap->ops->dev_select(ap, device); + + writeb(0x55, (void __iomem *) ioaddr->nsect_addr); + writeb(0xaa, (void __iomem *) ioaddr->lbal_addr); + + writeb(0xaa, (void __iomem *) ioaddr->nsect_addr); + writeb(0x55, (void __iomem *) ioaddr->lbal_addr); + + writeb(0x55, (void __iomem *) ioaddr->nsect_addr); + writeb(0xaa, (void __iomem *) ioaddr->lbal_addr); + + nsect = readb((void __iomem *) ioaddr->nsect_addr); + lbal = readb((void __iomem *) ioaddr->lbal_addr); + + if ((nsect == 0x55) && (lbal == 0xaa)) + return 1; /* we found a device */ + + return 0; /* nothing found */ +} + +/** + * ata_devchk - PATA device presence detection + * @ap: ATA channel to examine + * @device: Device to examine (starting at zero) + * + * Dispatch ATA device presence detection, depending + * on whether we are using PIO or MMIO to talk to the + * ATA shadow registers. + * + * LOCKING: + * caller. + */ + +static unsigned int ata_devchk(struct ata_port *ap, + unsigned int device) +{ + if (ap->flags & ATA_FLAG_MMIO) + return ata_mmio_devchk(ap, device); + return ata_pio_devchk(ap, device); +} + +/** + * ata_dev_classify - determine device type based on ATA-spec signature + * @tf: ATA taskfile register set for device to be identified + * + * Determine from taskfile register contents whether a device is + * ATA or ATAPI, as per "Signature and persistence" section + * of ATA/PI spec (volume 1, sect 5.14). + * + * LOCKING: + * None. + * + * RETURNS: + * Device type, %ATA_DEV_ATA, %ATA_DEV_ATAPI, or %ATA_DEV_UNKNOWN + * the event of failure. + */ + +unsigned int ata_dev_classify(const struct ata_taskfile *tf) +{ + /* Apple's open source Darwin code hints that some devices only + * put a proper signature into the LBA mid/high registers, + * So, we only check those. It's sufficient for uniqueness. + */ + + if (((tf->lbam == 0) && (tf->lbah == 0)) || + ((tf->lbam == 0x3c) && (tf->lbah == 0xc3))) { + DPRINTK("found ATA device by sig\n"); + return ATA_DEV_ATA; + } + + if (((tf->lbam == 0x14) && (tf->lbah == 0xeb)) || + ((tf->lbam == 0x69) && (tf->lbah == 0x96))) { + DPRINTK("found ATAPI device by sig\n"); + return ATA_DEV_ATAPI; + } + + DPRINTK("unknown device\n"); + return ATA_DEV_UNKNOWN; +} + +/** + * ata_dev_try_classify - Parse returned ATA device signature + * @ap: ATA channel to examine + * @device: Device to examine (starting at zero) + * @r_err: Value of error register on completion + * + * After an event -- SRST, E.D.D., or SATA COMRESET -- occurs, + * an ATA/ATAPI-defined set of values is placed in the ATA + * shadow registers, indicating the results of device detection + * and diagnostics. + * + * Select the ATA device, and read the values from the ATA shadow + * registers. Then parse according to the Error register value, + * and the spec-defined values examined by ata_dev_classify(). + * + * LOCKING: + * caller. + * + * RETURNS: + * Device type - %ATA_DEV_ATA, %ATA_DEV_ATAPI or %ATA_DEV_NONE. + */ + +static unsigned int +ata_dev_try_classify(struct ata_port *ap, unsigned int device, u8 *r_err) +{ + struct ata_taskfile tf; + unsigned int class; + u8 err; + + ap->ops->dev_select(ap, device); + + memset(&tf, 0, sizeof(tf)); + + ap->ops->tf_read(ap, &tf); + err = tf.feature; + if (r_err) + *r_err = err; + + /* see if device passed diags */ + if (err == 1) + /* do nothing */ ; + else if ((device == 0) && (err == 0x81)) + /* do nothing */ ; + else + return ATA_DEV_NONE; + + /* determine if device is ATA or ATAPI */ + class = ata_dev_classify(&tf); + + if (class == ATA_DEV_UNKNOWN) + return ATA_DEV_NONE; + if ((class == ATA_DEV_ATA) && (ata_chk_status(ap) == 0)) + return ATA_DEV_NONE; + return class; +} + +/** + * ata_id_string - Convert IDENTIFY DEVICE page into string + * @id: IDENTIFY DEVICE results we will examine + * @s: string into which data is output + * @ofs: offset into identify device page + * @len: length of string to return. must be an even number. + * + * The strings in the IDENTIFY DEVICE page are broken up into + * 16-bit chunks. Run through the string, and output each + * 8-bit chunk linearly, regardless of platform. + * + * LOCKING: + * caller. + */ + +void ata_id_string(const u16 *id, unsigned char *s, + unsigned int ofs, unsigned int len) +{ + unsigned int c; + + while (len > 0) { + c = id[ofs] >> 8; + *s = c; + s++; + + c = id[ofs] & 0xff; + *s = c; + s++; + + ofs++; + len -= 2; + } +} + +/** + * ata_id_c_string - Convert IDENTIFY DEVICE page into C string + * @id: IDENTIFY DEVICE results we will examine + * @s: string into which data is output + * @ofs: offset into identify device page + * @len: length of string to return. must be an odd number. + * + * This function is identical to ata_id_string except that it + * trims trailing spaces and terminates the resulting string with + * null. @len must be actual maximum length (even number) + 1. + * + * LOCKING: + * caller. + */ +void ata_id_c_string(const u16 *id, unsigned char *s, + unsigned int ofs, unsigned int len) +{ + unsigned char *p; + + WARN_ON(!(len & 1)); + + ata_id_string(id, s, ofs, len - 1); + + p = s + strnlen(s, len - 1); + while (p > s && p[-1] == ' ') + p--; + *p = '\0'; +} + +static u64 ata_id_n_sectors(const u16 *id) +{ + if (ata_id_has_lba(id)) { + if (ata_id_has_lba48(id)) + return ata_id_u64(id, 100); + else + return ata_id_u32(id, 60); + } else { + if (ata_id_current_chs_valid(id)) + return ata_id_u32(id, 57); + else + return id[1] * id[3] * id[6]; + } +} + +/** + * ata_noop_dev_select - Select device 0/1 on ATA bus + * @ap: ATA channel to manipulate + * @device: ATA device (numbered from zero) to select + * + * This function performs no actual function. + * + * May be used as the dev_select() entry in ata_port_operations. + * + * LOCKING: + * caller. + */ +void ata_noop_dev_select (struct ata_port *ap, unsigned int device) +{ +} + + +/** + * ata_std_dev_select - Select device 0/1 on ATA bus + * @ap: ATA channel to manipulate + * @device: ATA device (numbered from zero) to select + * + * Use the method defined in the ATA specification to + * make either device 0, or device 1, active on the + * ATA channel. Works with both PIO and MMIO. + * + * May be used as the dev_select() entry in ata_port_operations. + * + * LOCKING: + * caller. + */ + +void ata_std_dev_select (struct ata_port *ap, unsigned int device) +{ + u8 tmp; + + if (device == 0) + tmp = ATA_DEVICE_OBS; + else + tmp = ATA_DEVICE_OBS | ATA_DEV1; + + if (ap->flags & ATA_FLAG_MMIO) { + writeb(tmp, (void __iomem *) ap->ioaddr.device_addr); + } else { + outb(tmp, ap->ioaddr.device_addr); + } + ata_pause(ap); /* needed; also flushes, for mmio */ +} + +/** + * ata_dev_select - Select device 0/1 on ATA bus + * @ap: ATA channel to manipulate + * @device: ATA device (numbered from zero) to select + * @wait: non-zero to wait for Status register BSY bit to clear + * @can_sleep: non-zero if context allows sleeping + * + * Use the method defined in the ATA specification to + * make either device 0, or device 1, active on the + * ATA channel. + * + * This is a high-level version of ata_std_dev_select(), + * which additionally provides the services of inserting + * the proper pauses and status polling, where needed. + * + * LOCKING: + * caller. + */ + +void ata_dev_select(struct ata_port *ap, unsigned int device, + unsigned int wait, unsigned int can_sleep) +{ + if (ata_msg_probe(ap)) + ata_port_printk(ap, KERN_INFO, "ata_dev_select: ENTER, ata%u: " + "device %u, wait %u\n", ap->id, device, wait); + + if (wait) + ata_wait_idle(ap); + + ap->ops->dev_select(ap, device); + + if (wait) { + if (can_sleep && ap->device[device].class == ATA_DEV_ATAPI) + msleep(150); + ata_wait_idle(ap); + } +} + +/** + * ata_dump_id - IDENTIFY DEVICE info debugging output + * @id: IDENTIFY DEVICE page to dump + * + * Dump selected 16-bit words from the given IDENTIFY DEVICE + * page. + * + * LOCKING: + * caller. + */ + +static inline void ata_dump_id(const u16 *id) +{ + DPRINTK("49==0x%04x " + "53==0x%04x " + "63==0x%04x " + "64==0x%04x " + "75==0x%04x \n", + id[49], + id[53], + id[63], + id[64], + id[75]); + DPRINTK("80==0x%04x " + "81==0x%04x " + "82==0x%04x " + "83==0x%04x " + "84==0x%04x \n", + id[80], + id[81], + id[82], + id[83], + id[84]); + DPRINTK("88==0x%04x " + "93==0x%04x\n", + id[88], + id[93]); +} + +/** + * ata_id_xfermask - Compute xfermask from the given IDENTIFY data + * @id: IDENTIFY data to compute xfer mask from + * + * Compute the xfermask for this device. This is not as trivial + * as it seems if we must consider early devices correctly. + * + * FIXME: pre IDE drive timing (do we care ?). + * + * LOCKING: + * None. + * + * RETURNS: + * Computed xfermask + */ +static unsigned int ata_id_xfermask(const u16 *id) +{ + unsigned int pio_mask, mwdma_mask, udma_mask; + + /* Usual case. Word 53 indicates word 64 is valid */ + if (id[ATA_ID_FIELD_VALID] & (1 << 1)) { + pio_mask = id[ATA_ID_PIO_MODES] & 0x03; + pio_mask <<= 3; + pio_mask |= 0x7; + } else { + /* If word 64 isn't valid then Word 51 high byte holds + * the PIO timing number for the maximum. Turn it into + * a mask. + */ + pio_mask = (2 << (id[ATA_ID_OLD_PIO_MODES] & 0xFF)) - 1 ; + + /* But wait.. there's more. Design your standards by + * committee and you too can get a free iordy field to + * process. However its the speeds not the modes that + * are supported... Note drivers using the timing API + * will get this right anyway + */ + } + + mwdma_mask = id[ATA_ID_MWDMA_MODES] & 0x07; + + if (ata_id_is_cfa(id)) { + /* + * Process compact flash extended modes + */ + int pio = id[163] & 0x7; + int dma = (id[163] >> 3) & 7; + + if (pio) + pio_mask |= (1 << 5); + if (pio > 1) + pio_mask |= (1 << 6); + if (dma) + mwdma_mask |= (1 << 3); + if (dma > 1) + mwdma_mask |= (1 << 4); + } + + udma_mask = 0; + if (id[ATA_ID_FIELD_VALID] & (1 << 2)) + udma_mask = id[ATA_ID_UDMA_MODES] & 0xff; + + return ata_pack_xfermask(pio_mask, mwdma_mask, udma_mask); +} + +/** + * ata_port_queue_task - Queue port_task + * @ap: The ata_port to queue port_task for + * @fn: workqueue function to be scheduled + * @data: data value to pass to workqueue function + * @delay: delay time for workqueue function + * + * Schedule @fn(@data) for execution after @delay jiffies using + * port_task. There is one port_task per port and it's the + * user(low level driver)'s responsibility to make sure that only + * one task is active at any given time. + * + * libata core layer takes care of synchronization between + * port_task and EH. ata_port_queue_task() may be ignored for EH + * synchronization. + * + * LOCKING: + * Inherited from caller. + */ +void ata_port_queue_task(struct ata_port *ap, void (*fn)(void *), void *data, + unsigned long delay) +{ + int rc; + + if (ap->pflags & ATA_PFLAG_FLUSH_PORT_TASK) + return; + + PREPARE_WORK(&ap->port_task, fn, data); + + if (!delay) + rc = queue_work(ata_wq, &ap->port_task); + else + rc = queue_delayed_work(ata_wq, &ap->port_task, delay); + + /* rc == 0 means that another user is using port task */ + WARN_ON(rc == 0); +} + +/** + * ata_port_flush_task - Flush port_task + * @ap: The ata_port to flush port_task for + * + * After this function completes, port_task is guranteed not to + * be running or scheduled. + * + * LOCKING: + * Kernel thread context (may sleep) + */ +void ata_port_flush_task(struct ata_port *ap) +{ + unsigned long flags; + + DPRINTK("ENTER\n"); + + spin_lock_irqsave(ap->lock, flags); + ap->pflags |= ATA_PFLAG_FLUSH_PORT_TASK; + spin_unlock_irqrestore(ap->lock, flags); + + DPRINTK("flush #1\n"); + flush_workqueue(ata_wq); + + /* + * At this point, if a task is running, it's guaranteed to see + * the FLUSH flag; thus, it will never queue pio tasks again. + * Cancel and flush. + */ + if (!cancel_delayed_work(&ap->port_task)) { + if (ata_msg_ctl(ap)) + ata_port_printk(ap, KERN_DEBUG, "%s: flush #2\n", + __FUNCTION__); + flush_workqueue(ata_wq); + } + + spin_lock_irqsave(ap->lock, flags); + ap->pflags &= ~ATA_PFLAG_FLUSH_PORT_TASK; + spin_unlock_irqrestore(ap->lock, flags); + + if (ata_msg_ctl(ap)) + ata_port_printk(ap, KERN_DEBUG, "%s: EXIT\n", __FUNCTION__); +} + +void ata_qc_complete_internal(struct ata_queued_cmd *qc) +{ + struct completion *waiting = qc->private_data; + + complete(waiting); +} + +/** + * ata_exec_internal - execute libata internal command + * @dev: Device to which the command is sent + * @tf: Taskfile registers for the command and the result + * @cdb: CDB for packet command + * @dma_dir: Data tranfer direction of the command + * @buf: Data buffer of the command + * @buflen: Length of data buffer + * + * Executes libata internal command with timeout. @tf contains + * command on entry and result on return. Timeout and error + * conditions are reported via return value. No recovery action + * is taken after a command times out. It's caller's duty to + * clean up after timeout. + * + * LOCKING: + * None. Should be called with kernel context, might sleep. + * + * RETURNS: + * Zero on success, AC_ERR_* mask on failure + */ +unsigned ata_exec_internal(struct ata_device *dev, + struct ata_taskfile *tf, const u8 *cdb, + int dma_dir, void *buf, unsigned int buflen) +{ + struct ata_port *ap = dev->ap; + u8 command = tf->command; + struct ata_queued_cmd *qc; + unsigned int tag, preempted_tag; + u32 preempted_sactive, preempted_qc_active; + DECLARE_COMPLETION_ONSTACK(wait); + unsigned long flags; + unsigned int err_mask; + int rc; + + spin_lock_irqsave(ap->lock, flags); + + /* no internal command while frozen */ + if (ap->pflags & ATA_PFLAG_FROZEN) { + spin_unlock_irqrestore(ap->lock, flags); + return AC_ERR_SYSTEM; + } + + /* initialize internal qc */ + + /* XXX: Tag 0 is used for drivers with legacy EH as some + * drivers choke if any other tag is given. This breaks + * ata_tag_internal() test for those drivers. Don't use new + * EH stuff without converting to it. + */ + if (ap->ops->error_handler) + tag = ATA_TAG_INTERNAL; + else + tag = 0; + + if (test_and_set_bit(tag, &ap->qc_allocated)) + BUG(); + qc = __ata_qc_from_tag(ap, tag); + + qc->tag = tag; + qc->scsicmd = NULL; + qc->ap = ap; + qc->dev = dev; + ata_qc_reinit(qc); + + preempted_tag = ap->active_tag; + preempted_sactive = ap->sactive; + preempted_qc_active = ap->qc_active; + ap->active_tag = ATA_TAG_POISON; + ap->sactive = 0; + ap->qc_active = 0; + + /* prepare & issue qc */ + qc->tf = *tf; + if (cdb) + memcpy(qc->cdb, cdb, ATAPI_CDB_LEN); + qc->flags |= ATA_QCFLAG_RESULT_TF; + qc->dma_dir = dma_dir; + if (dma_dir != DMA_NONE) { + ata_sg_init_one(qc, buf, buflen); + qc->nsect = buflen / ATA_SECT_SIZE; + } + + qc->private_data = &wait; + qc->complete_fn = ata_qc_complete_internal; + + ata_qc_issue(qc); + + spin_unlock_irqrestore(ap->lock, flags); + + rc = wait_for_completion_timeout(&wait, ata_probe_timeout); + + ata_port_flush_task(ap); + + if (!rc) { + spin_lock_irqsave(ap->lock, flags); + + /* We're racing with irq here. If we lose, the + * following test prevents us from completing the qc + * twice. If we win, the port is frozen and will be + * cleaned up by ->post_internal_cmd(). + */ + if (qc->flags & ATA_QCFLAG_ACTIVE) { + qc->err_mask |= AC_ERR_TIMEOUT; + + if (ap->ops->error_handler) + ata_port_freeze(ap); + else + ata_qc_complete(qc); + + if (ata_msg_warn(ap)) + ata_dev_printk(dev, KERN_WARNING, + "qc timeout (cmd 0x%x)\n", command); + } + + spin_unlock_irqrestore(ap->lock, flags); + } + + /* do post_internal_cmd */ + if (ap->ops->post_internal_cmd) + ap->ops->post_internal_cmd(qc); + + if (qc->flags & ATA_QCFLAG_FAILED && !qc->err_mask) { + if (ata_msg_warn(ap)) + ata_dev_printk(dev, KERN_WARNING, + "zero err_mask for failed " + "internal command, assuming AC_ERR_OTHER\n"); + qc->err_mask |= AC_ERR_OTHER; + } + + /* finish up */ + spin_lock_irqsave(ap->lock, flags); + + *tf = qc->result_tf; + err_mask = qc->err_mask; + + ata_qc_free(qc); + ap->active_tag = preempted_tag; + ap->sactive = preempted_sactive; + ap->qc_active = preempted_qc_active; + + /* XXX - Some LLDDs (sata_mv) disable port on command failure. + * Until those drivers are fixed, we detect the condition + * here, fail the command with AC_ERR_SYSTEM and reenable the + * port. + * + * Note that this doesn't change any behavior as internal + * command failure results in disabling the device in the + * higher layer for LLDDs without new reset/EH callbacks. + * + * Kill the following code as soon as those drivers are fixed. + */ + if (ap->flags & ATA_FLAG_DISABLED) { + err_mask |= AC_ERR_SYSTEM; + ata_port_probe(ap); + } + + spin_unlock_irqrestore(ap->lock, flags); + + return err_mask; +} + +/** + * ata_do_simple_cmd - execute simple internal command + * @dev: Device to which the command is sent + * @cmd: Opcode to execute + * + * Execute a 'simple' command, that only consists of the opcode + * 'cmd' itself, without filling any other registers + * + * LOCKING: + * Kernel thread context (may sleep). + * + * RETURNS: + * Zero on success, AC_ERR_* mask on failure + */ +unsigned int ata_do_simple_cmd(struct ata_device *dev, u8 cmd) +{ + struct ata_taskfile tf; + + ata_tf_init(dev, &tf); + + tf.command = cmd; + tf.flags |= ATA_TFLAG_DEVICE; + tf.protocol = ATA_PROT_NODATA; + + return ata_exec_internal(dev, &tf, NULL, DMA_NONE, NULL, 0); +} + +/** + * ata_pio_need_iordy - check if iordy needed + * @adev: ATA device + * + * Check if the current speed of the device requires IORDY. Used + * by various controllers for chip configuration. + */ + +unsigned int ata_pio_need_iordy(const struct ata_device *adev) +{ + int pio; + int speed = adev->pio_mode - XFER_PIO_0; + + if (speed < 2) + return 0; + if (speed > 2) + return 1; + + /* If we have no drive specific rule, then PIO 2 is non IORDY */ + + if (adev->id[ATA_ID_FIELD_VALID] & 2) { /* EIDE */ + pio = adev->id[ATA_ID_EIDE_PIO]; + /* Is the speed faster than the drive allows non IORDY ? */ + if (pio) { + /* This is cycle times not frequency - watch the logic! */ + if (pio > 240) /* PIO2 is 240nS per cycle */ + return 1; + return 0; + } + } + return 0; +} + +/** + * ata_dev_read_id - Read ID data from the specified device + * @dev: target device + * @p_class: pointer to class of the target device (may be changed) + * @post_reset: is this read ID post-reset? + * @id: buffer to read IDENTIFY data into + * + * Read ID data from the specified device. ATA_CMD_ID_ATA is + * performed on ATA devices and ATA_CMD_ID_ATAPI on ATAPI + * devices. This function also issues ATA_CMD_INIT_DEV_PARAMS + * for pre-ATA4 drives. + * + * LOCKING: + * Kernel thread context (may sleep) + * + * RETURNS: + * 0 on success, -errno otherwise. + */ +int ata_dev_read_id(struct ata_device *dev, unsigned int *p_class, + int post_reset, u16 *id) +{ + struct ata_port *ap = dev->ap; + unsigned int class = *p_class; + struct ata_taskfile tf; + unsigned int err_mask = 0; + const char *reason; + int rc; + + if (ata_msg_ctl(ap)) + ata_dev_printk(dev, KERN_DEBUG, "%s: ENTER, host %u, dev %u\n", + __FUNCTION__, ap->id, dev->devno); + + ata_dev_select(ap, dev->devno, 1, 1); /* select device 0/1 */ + + retry: + ata_tf_init(dev, &tf); + + switch (class) { + case ATA_DEV_ATA: + tf.command = ATA_CMD_ID_ATA; + break; + case ATA_DEV_ATAPI: + tf.command = ATA_CMD_ID_ATAPI; + break; + default: + rc = -ENODEV; + reason = "unsupported class"; + goto err_out; + } + + tf.protocol = ATA_PROT_PIO; + + err_mask = ata_exec_internal(dev, &tf, NULL, DMA_FROM_DEVICE, + id, sizeof(id[0]) * ATA_ID_WORDS); + if (err_mask) { + rc = -EIO; + reason = "I/O error"; + goto err_out; + } + + swap_buf_le16(id, ATA_ID_WORDS); + + /* sanity check */ - if ((class == ATA_DEV_ATA) != (ata_id_is_ata(id) | ata_id_is_cfa(id))) { - rc = -EINVAL; - reason = "device reports illegal type"; - goto err_out; ++ rc = -EINVAL; ++ reason = "device reports illegal type"; ++ ++ if (class == ATA_DEV_ATA) { ++ if (!ata_id_is_ata(id) && !ata_id_is_cfa(id)) ++ goto err_out; ++ } else { ++ if (ata_id_is_ata(id)) ++ goto err_out; + } + + if (post_reset && class == ATA_DEV_ATA) { + /* + * The exact sequence expected by certain pre-ATA4 drives is: + * SRST RESET + * IDENTIFY + * INITIALIZE DEVICE PARAMETERS + * anything else.. + * Some drives were very specific about that exact sequence. + */ + if (ata_id_major_version(id) < 4 || !ata_id_has_lba(id)) { + err_mask = ata_dev_init_params(dev, id[3], id[6]); + if (err_mask) { + rc = -EIO; + reason = "INIT_DEV_PARAMS failed"; + goto err_out; + } + + /* current CHS translation info (id[53-58]) might be + * changed. reread the identify device info. + */ + post_reset = 0; + goto retry; + } + } + + *p_class = class; + + return 0; + + err_out: + if (ata_msg_warn(ap)) + ata_dev_printk(dev, KERN_WARNING, "failed to IDENTIFY " + "(%s, err_mask=0x%x)\n", reason, err_mask); + return rc; +} + +static inline u8 ata_dev_knobble(struct ata_device *dev) +{ + return ((dev->ap->cbl == ATA_CBL_SATA) && (!ata_id_is_sata(dev->id))); +} + +static void ata_dev_config_ncq(struct ata_device *dev, + char *desc, size_t desc_sz) +{ + struct ata_port *ap = dev->ap; + int hdepth = 0, ddepth = ata_id_queue_depth(dev->id); + + if (!ata_id_has_ncq(dev->id)) { + desc[0] = '\0'; + return; + } + + if (ap->flags & ATA_FLAG_NCQ) { + hdepth = min(ap->scsi_host->can_queue, ATA_MAX_QUEUE - 1); + dev->flags |= ATA_DFLAG_NCQ; + } + + if (hdepth >= ddepth) + snprintf(desc, desc_sz, "NCQ (depth %d)", ddepth); + else + snprintf(desc, desc_sz, "NCQ (depth %d/%d)", hdepth, ddepth); +} + +static void ata_set_port_max_cmd_len(struct ata_port *ap) +{ + int i; + + if (ap->scsi_host) { + unsigned int len = 0; + + for (i = 0; i < ATA_MAX_DEVICES; i++) + len = max(len, ap->device[i].cdb_len); + + ap->scsi_host->max_cmd_len = len; + } +} + +/** + * ata_dev_configure - Configure the specified ATA/ATAPI device + * @dev: Target device to configure + * @print_info: Enable device info printout + * + * Configure @dev according to @dev->id. Generic and low-level + * driver specific fixups are also applied. + * + * LOCKING: + * Kernel thread context (may sleep) + * + * RETURNS: + * 0 on success, -errno otherwise + */ +int ata_dev_configure(struct ata_device *dev, int print_info) +{ + struct ata_port *ap = dev->ap; + const u16 *id = dev->id; + unsigned int xfer_mask; + char revbuf[7]; /* XYZ-99\0 */ + int rc; + + if (!ata_dev_enabled(dev) && ata_msg_info(ap)) { + ata_dev_printk(dev, KERN_INFO, + "%s: ENTER/EXIT (host %u, dev %u) -- nodev\n", + __FUNCTION__, ap->id, dev->devno); + return 0; + } + + if (ata_msg_probe(ap)) + ata_dev_printk(dev, KERN_DEBUG, "%s: ENTER, host %u, dev %u\n", + __FUNCTION__, ap->id, dev->devno); + + /* print device capabilities */ + if (ata_msg_probe(ap)) + ata_dev_printk(dev, KERN_DEBUG, + "%s: cfg 49:%04x 82:%04x 83:%04x 84:%04x " + "85:%04x 86:%04x 87:%04x 88:%04x\n", + __FUNCTION__, + id[49], id[82], id[83], id[84], + id[85], id[86], id[87], id[88]); + + /* initialize to-be-configured parameters */ + dev->flags &= ~ATA_DFLAG_CFG_MASK; + dev->max_sectors = 0; + dev->cdb_len = 0; + dev->n_sectors = 0; + dev->cylinders = 0; + dev->heads = 0; + dev->sectors = 0; + + /* + * common ATA, ATAPI feature tests + */ + + /* find max transfer mode; for printk only */ + xfer_mask = ata_id_xfermask(id); + + if (ata_msg_probe(ap)) + ata_dump_id(id); + + /* ATA-specific feature tests */ + if (dev->class == ATA_DEV_ATA) { + if (ata_id_is_cfa(id)) { + if (id[162] & 1) /* CPRM may make this media unusable */ + ata_dev_printk(dev, KERN_WARNING, "ata%u: device %u supports DRM functions and may not be fully accessable.\n", + ap->id, dev->devno); + snprintf(revbuf, 7, "CFA"); + } + else + snprintf(revbuf, 7, "ATA-%d", ata_id_major_version(id)); + + dev->n_sectors = ata_id_n_sectors(id); + + if (ata_id_has_lba(id)) { + const char *lba_desc; + char ncq_desc[20]; + + lba_desc = "LBA"; + dev->flags |= ATA_DFLAG_LBA; + if (ata_id_has_lba48(id)) { + dev->flags |= ATA_DFLAG_LBA48; + lba_desc = "LBA48"; + } + + /* config NCQ */ + ata_dev_config_ncq(dev, ncq_desc, sizeof(ncq_desc)); + + /* print device info to dmesg */ + if (ata_msg_drv(ap) && print_info) + ata_dev_printk(dev, KERN_INFO, "%s, " + "max %s, %Lu sectors: %s %s\n", + revbuf, + ata_mode_string(xfer_mask), + (unsigned long long)dev->n_sectors, + lba_desc, ncq_desc); + } else { + /* CHS */ + + /* Default translation */ + dev->cylinders = id[1]; + dev->heads = id[3]; + dev->sectors = id[6]; + + if (ata_id_current_chs_valid(id)) { + /* Current CHS translation is valid. */ + dev->cylinders = id[54]; + dev->heads = id[55]; + dev->sectors = id[56]; + } + + /* print device info to dmesg */ + if (ata_msg_drv(ap) && print_info) + ata_dev_printk(dev, KERN_INFO, "%s, " + "max %s, %Lu sectors: CHS %u/%u/%u\n", + revbuf, + ata_mode_string(xfer_mask), + (unsigned long long)dev->n_sectors, + dev->cylinders, dev->heads, + dev->sectors); + } + + if (dev->id[59] & 0x100) { + dev->multi_count = dev->id[59] & 0xff; + if (ata_msg_drv(ap) && print_info) + ata_dev_printk(dev, KERN_INFO, + "ata%u: dev %u multi count %u\n", + ap->id, dev->devno, dev->multi_count); + } + + dev->cdb_len = 16; + } + + /* ATAPI-specific feature tests */ + else if (dev->class == ATA_DEV_ATAPI) { + char *cdb_intr_string = ""; + + rc = atapi_cdb_len(id); + if ((rc < 12) || (rc > ATAPI_CDB_LEN)) { + if (ata_msg_warn(ap)) + ata_dev_printk(dev, KERN_WARNING, + "unsupported CDB len\n"); + rc = -EINVAL; + goto err_out_nosup; + } + dev->cdb_len = (unsigned int) rc; + + if (ata_id_cdb_intr(dev->id)) { + dev->flags |= ATA_DFLAG_CDB_INTR; + cdb_intr_string = ", CDB intr"; + } + + /* print device info to dmesg */ + if (ata_msg_drv(ap) && print_info) + ata_dev_printk(dev, KERN_INFO, "ATAPI, max %s%s\n", + ata_mode_string(xfer_mask), + cdb_intr_string); + } + + ata_set_port_max_cmd_len(ap); + + /* limit bridge transfers to udma5, 200 sectors */ + if (ata_dev_knobble(dev)) { + if (ata_msg_drv(ap) && print_info) + ata_dev_printk(dev, KERN_INFO, + "applying bridge limits\n"); + dev->udma_mask &= ATA_UDMA5; + dev->max_sectors = ATA_MAX_SECTORS; + } + + if (ap->ops->dev_config) + ap->ops->dev_config(ap, dev); + + if (ata_msg_probe(ap)) + ata_dev_printk(dev, KERN_DEBUG, "%s: EXIT, drv_stat = 0x%x\n", + __FUNCTION__, ata_chk_status(ap)); + return 0; + +err_out_nosup: + if (ata_msg_probe(ap)) + ata_dev_printk(dev, KERN_DEBUG, + "%s: EXIT, err\n", __FUNCTION__); + return rc; +} + +/** + * ata_bus_probe - Reset and probe ATA bus + * @ap: Bus to probe + * + * Master ATA bus probing function. Initiates a hardware-dependent + * bus reset, then attempts to identify any devices found on + * the bus. + * + * LOCKING: + * PCI/etc. bus probe sem. + * + * RETURNS: + * Zero on success, negative errno otherwise. + */ + +int ata_bus_probe(struct ata_port *ap) +{ + unsigned int classes[ATA_MAX_DEVICES]; + int tries[ATA_MAX_DEVICES]; + int i, rc, down_xfermask; + struct ata_device *dev; + + ata_port_probe(ap); + + for (i = 0; i < ATA_MAX_DEVICES; i++) + tries[i] = ATA_PROBE_MAX_TRIES; + + retry: + down_xfermask = 0; + + /* reset and determine device classes */ + ap->ops->phy_reset(ap); + + for (i = 0; i < ATA_MAX_DEVICES; i++) { + dev = &ap->device[i]; + + if (!(ap->flags & ATA_FLAG_DISABLED) && + dev->class != ATA_DEV_UNKNOWN) + classes[dev->devno] = dev->class; + else + classes[dev->devno] = ATA_DEV_NONE; + + dev->class = ATA_DEV_UNKNOWN; + } + + ata_port_probe(ap); + + /* after the reset the device state is PIO 0 and the controller + state is undefined. Record the mode */ + + for (i = 0; i < ATA_MAX_DEVICES; i++) + ap->device[i].pio_mode = XFER_PIO_0; + + /* read IDENTIFY page and configure devices */ + for (i = 0; i < ATA_MAX_DEVICES; i++) { + dev = &ap->device[i]; + + if (tries[i]) + dev->class = classes[i]; + + if (!ata_dev_enabled(dev)) + continue; + + rc = ata_dev_read_id(dev, &dev->class, 1, dev->id); + if (rc) + goto fail; + + rc = ata_dev_configure(dev, 1); + if (rc) + goto fail; + } + + /* configure transfer mode */ + rc = ata_set_mode(ap, &dev); + if (rc) { + down_xfermask = 1; + goto fail; + } + + for (i = 0; i < ATA_MAX_DEVICES; i++) + if (ata_dev_enabled(&ap->device[i])) + return 0; + + /* no device present, disable port */ + ata_port_disable(ap); + ap->ops->port_disable(ap); + return -ENODEV; + + fail: + switch (rc) { + case -EINVAL: + case -ENODEV: + tries[dev->devno] = 0; + break; + case -EIO: + sata_down_spd_limit(ap); + /* fall through */ + default: + tries[dev->devno]--; + if (down_xfermask && + ata_down_xfermask_limit(dev, tries[dev->devno] == 1)) + tries[dev->devno] = 0; + } + + if (!tries[dev->devno]) { + ata_down_xfermask_limit(dev, 1); + ata_dev_disable(dev); + } + + goto retry; +} + +/** + * ata_port_probe - Mark port as enabled + * @ap: Port for which we indicate enablement + * + * Modify @ap data structure such that the system + * thinks that the entire port is enabled. + * + * LOCKING: host lock, or some other form of + * serialization. + */ + +void ata_port_probe(struct ata_port *ap) +{ + ap->flags &= ~ATA_FLAG_DISABLED; +} + +/** + * sata_print_link_status - Print SATA link status + * @ap: SATA port to printk link status about + * + * This function prints link speed and status of a SATA link. + * + * LOCKING: + * None. + */ +static void sata_print_link_status(struct ata_port *ap) +{ + u32 sstatus, scontrol, tmp; + + if (sata_scr_read(ap, SCR_STATUS, &sstatus)) + return; + sata_scr_read(ap, SCR_CONTROL, &scontrol); + + if (ata_port_online(ap)) { + tmp = (sstatus >> 4) & 0xf; + ata_port_printk(ap, KERN_INFO, + "SATA link up %s (SStatus %X SControl %X)\n", + sata_spd_string(tmp), sstatus, scontrol); + } else { + ata_port_printk(ap, KERN_INFO, + "SATA link down (SStatus %X SControl %X)\n", + sstatus, scontrol); + } +} + +/** + * __sata_phy_reset - Wake/reset a low-level SATA PHY + * @ap: SATA port associated with target SATA PHY. + * + * This function issues commands to standard SATA Sxxx + * PHY registers, to wake up the phy (and device), and + * clear any reset condition. + * + * LOCKING: + * PCI/etc. bus probe sem. + * + */ +void __sata_phy_reset(struct ata_port *ap) +{ + u32 sstatus; + unsigned long timeout = jiffies + (HZ * 5); + + if (ap->flags & ATA_FLAG_SATA_RESET) { + /* issue phy wake/reset */ + sata_scr_write_flush(ap, SCR_CONTROL, 0x301); + /* Couldn't find anything in SATA I/II specs, but + * AHCI-1.1 10.4.2 says at least 1 ms. */ + mdelay(1); + } + /* phy wake/clear reset */ + sata_scr_write_flush(ap, SCR_CONTROL, 0x300); + + /* wait for phy to become ready, if necessary */ + do { + msleep(200); + sata_scr_read(ap, SCR_STATUS, &sstatus); + if ((sstatus & 0xf) != 1) + break; + } while (time_before(jiffies, timeout)); + + /* print link status */ + sata_print_link_status(ap); + + /* TODO: phy layer with polling, timeouts, etc. */ + if (!ata_port_offline(ap)) + ata_port_probe(ap); + else + ata_port_disable(ap); + + if (ap->flags & ATA_FLAG_DISABLED) + return; + + if (ata_busy_sleep(ap, ATA_TMOUT_BOOT_QUICK, ATA_TMOUT_BOOT)) { + ata_port_disable(ap); + return; + } + + ap->cbl = ATA_CBL_SATA; +} + +/** + * sata_phy_reset - Reset SATA bus. + * @ap: SATA port associated with target SATA PHY. + * + * This function resets the SATA bus, and then probes + * the bus for devices. + * + * LOCKING: + * PCI/etc. bus probe sem. + * + */ +void sata_phy_reset(struct ata_port *ap) +{ + __sata_phy_reset(ap); + if (ap->flags & ATA_FLAG_DISABLED) + return; + ata_bus_reset(ap); +} + +/** + * ata_dev_pair - return other device on cable + * @adev: device + * + * Obtain the other device on the same cable, or if none is + * present NULL is returned + */ + +struct ata_device *ata_dev_pair(struct ata_device *adev) +{ + struct ata_port *ap = adev->ap; + struct ata_device *pair = &ap->device[1 - adev->devno]; + if (!ata_dev_enabled(pair)) + return NULL; + return pair; +} + +/** + * ata_port_disable - Disable port. + * @ap: Port to be disabled. + * + * Modify @ap data structure such that the system + * thinks that the entire port is disabled, and should + * never attempt to probe or communicate with devices + * on this port. + * + * LOCKING: host lock, or some other form of + * serialization. + */ + +void ata_port_disable(struct ata_port *ap) +{ + ap->device[0].class = ATA_DEV_NONE; + ap->device[1].class = ATA_DEV_NONE; + ap->flags |= ATA_FLAG_DISABLED; +} + +/** + * sata_down_spd_limit - adjust SATA spd limit downward + * @ap: Port to adjust SATA spd limit for + * + * Adjust SATA spd limit of @ap downward. Note that this + * function only adjusts the limit. The change must be applied + * using sata_set_spd(). + * + * LOCKING: + * Inherited from caller. + * + * RETURNS: + * 0 on success, negative errno on failure + */ +int sata_down_spd_limit(struct ata_port *ap) +{ + u32 sstatus, spd, mask; + int rc, highbit; + + rc = sata_scr_read(ap, SCR_STATUS, &sstatus); + if (rc) + return rc; + + mask = ap->sata_spd_limit; + if (mask <= 1) + return -EINVAL; + highbit = fls(mask) - 1; + mask &= ~(1 << highbit); + + spd = (sstatus >> 4) & 0xf; + if (spd <= 1) + return -EINVAL; + spd--; + mask &= (1 << spd) - 1; + if (!mask) + return -EINVAL; + + ap->sata_spd_limit = mask; + + ata_port_printk(ap, KERN_WARNING, "limiting SATA link speed to %s\n", + sata_spd_string(fls(mask))); + + return 0; +} + +static int __sata_set_spd_needed(struct ata_port *ap, u32 *scontrol) +{ + u32 spd, limit; + + if (ap->sata_spd_limit == UINT_MAX) + limit = 0; + else + limit = fls(ap->sata_spd_limit); + + spd = (*scontrol >> 4) & 0xf; + *scontrol = (*scontrol & ~0xf0) | ((limit & 0xf) << 4); + + return spd != limit; +} + +/** + * sata_set_spd_needed - is SATA spd configuration needed + * @ap: Port in question + * + * Test whether the spd limit in SControl matches + * @ap->sata_spd_limit. This function is used to determine + * whether hardreset is necessary to apply SATA spd + * configuration. + * + * LOCKING: + * Inherited from caller. + * + * RETURNS: + * 1 if SATA spd configuration is needed, 0 otherwise. + */ +int sata_set_spd_needed(struct ata_port *ap) +{ + u32 scontrol; + + if (sata_scr_read(ap, SCR_CONTROL, &scontrol)) + return 0; + + return __sata_set_spd_needed(ap, &scontrol); +} + +/** + * sata_set_spd - set SATA spd according to spd limit + * @ap: Port to set SATA spd for + * + * Set SATA spd of @ap according to sata_spd_limit. + * + * LOCKING: + * Inherited from caller. + * + * RETURNS: + * 0 if spd doesn't need to be changed, 1 if spd has been + * changed. Negative errno if SCR registers are inaccessible. + */ +int sata_set_spd(struct ata_port *ap) +{ + u32 scontrol; + int rc; + + if ((rc = sata_scr_read(ap, SCR_CONTROL, &scontrol))) + return rc; + + if (!__sata_set_spd_needed(ap, &scontrol)) + return 0; + + if ((rc = sata_scr_write(ap, SCR_CONTROL, scontrol))) + return rc; + + return 1; +} + +/* + * This mode timing computation functionality is ported over from + * drivers/ide/ide-timing.h and was originally written by Vojtech Pavlik + */ +/* + * PIO 0-4, MWDMA 0-2 and UDMA 0-6 timings (in nanoseconds). + * These were taken from ATA/ATAPI-6 standard, rev 0a, except + * for UDMA6, which is currently supported only by Maxtor drives. + * + * For PIO 5/6 MWDMA 3/4 see the CFA specification 3.0. + */ + +static const struct ata_timing ata_timing[] = { + + { XFER_UDMA_6, 0, 0, 0, 0, 0, 0, 0, 15 }, + { XFER_UDMA_5, 0, 0, 0, 0, 0, 0, 0, 20 }, + { XFER_UDMA_4, 0, 0, 0, 0, 0, 0, 0, 30 }, + { XFER_UDMA_3, 0, 0, 0, 0, 0, 0, 0, 45 }, + + { XFER_MW_DMA_4, 25, 0, 0, 0, 55, 20, 80, 0 }, + { XFER_MW_DMA_3, 25, 0, 0, 0, 65, 25, 100, 0 }, + { XFER_UDMA_2, 0, 0, 0, 0, 0, 0, 0, 60 }, + { XFER_UDMA_1, 0, 0, 0, 0, 0, 0, 0, 80 }, + { XFER_UDMA_0, 0, 0, 0, 0, 0, 0, 0, 120 }, + +/* { XFER_UDMA_SLOW, 0, 0, 0, 0, 0, 0, 0, 150 }, */ + + { XFER_MW_DMA_2, 25, 0, 0, 0, 70, 25, 120, 0 }, + { XFER_MW_DMA_1, 45, 0, 0, 0, 80, 50, 150, 0 }, + { XFER_MW_DMA_0, 60, 0, 0, 0, 215, 215, 480, 0 }, + + { XFER_SW_DMA_2, 60, 0, 0, 0, 120, 120, 240, 0 }, + { XFER_SW_DMA_1, 90, 0, 0, 0, 240, 240, 480, 0 }, + { XFER_SW_DMA_0, 120, 0, 0, 0, 480, 480, 960, 0 }, + + { XFER_PIO_6, 10, 55, 20, 80, 55, 20, 80, 0 }, + { XFER_PIO_5, 15, 65, 25, 100, 65, 25, 100, 0 }, + { XFER_PIO_4, 25, 70, 25, 120, 70, 25, 120, 0 }, + { XFER_PIO_3, 30, 80, 70, 180, 80, 70, 180, 0 }, + + { XFER_PIO_2, 30, 290, 40, 330, 100, 90, 240, 0 }, + { XFER_PIO_1, 50, 290, 93, 383, 125, 100, 383, 0 }, + { XFER_PIO_0, 70, 290, 240, 600, 165, 150, 600, 0 }, + +/* { XFER_PIO_SLOW, 120, 290, 240, 960, 290, 240, 960, 0 }, */ + + { 0xFF } +}; + +#define ENOUGH(v,unit) (((v)-1)/(unit)+1) +#define EZ(v,unit) ((v)?ENOUGH(v,unit):0) + +static void ata_timing_quantize(const struct ata_timing *t, struct ata_timing *q, int T, int UT) +{ + q->setup = EZ(t->setup * 1000, T); + q->act8b = EZ(t->act8b * 1000, T); + q->rec8b = EZ(t->rec8b * 1000, T); + q->cyc8b = EZ(t->cyc8b * 1000, T); + q->active = EZ(t->active * 1000, T); + q->recover = EZ(t->recover * 1000, T); + q->cycle = EZ(t->cycle * 1000, T); + q->udma = EZ(t->udma * 1000, UT); +} + +void ata_timing_merge(const struct ata_timing *a, const struct ata_timing *b, + struct ata_timing *m, unsigned int what) +{ + if (what & ATA_TIMING_SETUP ) m->setup = max(a->setup, b->setup); + if (what & ATA_TIMING_ACT8B ) m->act8b = max(a->act8b, b->act8b); + if (what & ATA_TIMING_REC8B ) m->rec8b = max(a->rec8b, b->rec8b); + if (what & ATA_TIMING_CYC8B ) m->cyc8b = max(a->cyc8b, b->cyc8b); + if (what & ATA_TIMING_ACTIVE ) m->active = max(a->active, b->active); + if (what & ATA_TIMING_RECOVER) m->recover = max(a->recover, b->recover); + if (what & ATA_TIMING_CYCLE ) m->cycle = max(a->cycle, b->cycle); + if (what & ATA_TIMING_UDMA ) m->udma = max(a->udma, b->udma); +} + +static const struct ata_timing* ata_timing_find_mode(unsigned short speed) +{ + const struct ata_timing *t; + + for (t = ata_timing; t->mode != speed; t++) + if (t->mode == 0xFF) + return NULL; + return t; +} + +int ata_timing_compute(struct ata_device *adev, unsigned short speed, + struct ata_timing *t, int T, int UT) +{ + const struct ata_timing *s; + struct ata_timing p; + + /* + * Find the mode. + */ + + if (!(s = ata_timing_find_mode(speed))) + return -EINVAL; + + memcpy(t, s, sizeof(*s)); + + /* + * If the drive is an EIDE drive, it can tell us it needs extended + * PIO/MW_DMA cycle timing. + */ + + if (adev->id[ATA_ID_FIELD_VALID] & 2) { /* EIDE drive */ + memset(&p, 0, sizeof(p)); + if(speed >= XFER_PIO_0 && speed <= XFER_SW_DMA_0) { + if (speed <= XFER_PIO_2) p.cycle = p.cyc8b = adev->id[ATA_ID_EIDE_PIO]; + else p.cycle = p.cyc8b = adev->id[ATA_ID_EIDE_PIO_IORDY]; + } else if(speed >= XFER_MW_DMA_0 && speed <= XFER_MW_DMA_2) { + p.cycle = adev->id[ATA_ID_EIDE_DMA_MIN]; + } + ata_timing_merge(&p, t, t, ATA_TIMING_CYCLE | ATA_TIMING_CYC8B); + } + + /* + * Convert the timing to bus clock counts. + */ + + ata_timing_quantize(t, t, T, UT); + + /* + * Even in DMA/UDMA modes we still use PIO access for IDENTIFY, + * S.M.A.R.T * and some other commands. We have to ensure that the + * DMA cycle timing is slower/equal than the fastest PIO timing. + */ + + if (speed > XFER_PIO_4) { + ata_timing_compute(adev, adev->pio_mode, &p, T, UT); + ata_timing_merge(&p, t, t, ATA_TIMING_ALL); + } + + /* + * Lengthen active & recovery time so that cycle time is correct. + */ + + if (t->act8b + t->rec8b < t->cyc8b) { + t->act8b += (t->cyc8b - (t->act8b + t->rec8b)) / 2; + t->rec8b = t->cyc8b - t->act8b; + } + + if (t->active + t->recover < t->cycle) { + t->active += (t->cycle - (t->active + t->recover)) / 2; + t->recover = t->cycle - t->active; + } + + return 0; +} + +/** + * ata_down_xfermask_limit - adjust dev xfer masks downward + * @dev: Device to adjust xfer masks + * @force_pio0: Force PIO0 + * + * Adjust xfer masks of @dev downward. Note that this function + * does not apply the change. Invoking ata_set_mode() afterwards + * will apply the limit. + * + * LOCKING: + * Inherited from caller. + * + * RETURNS: + * 0 on success, negative errno on failure + */ +int ata_down_xfermask_limit(struct ata_device *dev, int force_pio0) +{ + unsigned long xfer_mask; + int highbit; + + xfer_mask = ata_pack_xfermask(dev->pio_mask, dev->mwdma_mask, + dev->udma_mask); + + if (!xfer_mask) + goto fail; + /* don't gear down to MWDMA from UDMA, go directly to PIO */ + if (xfer_mask & ATA_MASK_UDMA) + xfer_mask &= ~ATA_MASK_MWDMA; + + highbit = fls(xfer_mask) - 1; + xfer_mask &= ~(1 << highbit); + if (force_pio0) + xfer_mask &= 1 << ATA_SHIFT_PIO; + if (!xfer_mask) + goto fail; + + ata_unpack_xfermask(xfer_mask, &dev->pio_mask, &dev->mwdma_mask, + &dev->udma_mask); + + ata_dev_printk(dev, KERN_WARNING, "limiting speed to %s\n", + ata_mode_string(xfer_mask)); + + return 0; + + fail: + return -EINVAL; +} + +static int ata_dev_set_mode(struct ata_device *dev) +{ + unsigned int err_mask; + int rc; + + dev->flags &= ~ATA_DFLAG_PIO; + if (dev->xfer_shift == ATA_SHIFT_PIO) + dev->flags |= ATA_DFLAG_PIO; + + err_mask = ata_dev_set_xfermode(dev); + if (err_mask) { + ata_dev_printk(dev, KERN_ERR, "failed to set xfermode " + "(err_mask=0x%x)\n", err_mask); + return -EIO; + } + + rc = ata_dev_revalidate(dev, 0); + if (rc) + return rc; + + DPRINTK("xfer_shift=%u, xfer_mode=0x%x\n", + dev->xfer_shift, (int)dev->xfer_mode); + + ata_dev_printk(dev, KERN_INFO, "configured for %s\n", + ata_mode_string(ata_xfer_mode2mask(dev->xfer_mode))); + return 0; +} + +/** + * ata_set_mode - Program timings and issue SET FEATURES - XFER + * @ap: port on which timings will be programmed + * @r_failed_dev: out paramter for failed device + * + * Set ATA device disk transfer mode (PIO3, UDMA6, etc.). If + * ata_set_mode() fails, pointer to the failing device is + * returned in @r_failed_dev. + * + * LOCKING: + * PCI/etc. bus probe sem. + * + * RETURNS: + * 0 on success, negative errno otherwise + */ +int ata_set_mode(struct ata_port *ap, struct ata_device **r_failed_dev) +{ + struct ata_device *dev; + int i, rc = 0, used_dma = 0, found = 0; + + /* has private set_mode? */ + if (ap->ops->set_mode) { + /* FIXME: make ->set_mode handle no device case and + * return error code and failing device on failure. + */ + for (i = 0; i < ATA_MAX_DEVICES; i++) { + if (ata_dev_ready(&ap->device[i])) { + ap->ops->set_mode(ap); + break; + } + } + return 0; + } + + /* step 1: calculate xfer_mask */ + for (i = 0; i < ATA_MAX_DEVICES; i++) { + unsigned int pio_mask, dma_mask; + + dev = &ap->device[i]; + + if (!ata_dev_enabled(dev)) + continue; + + ata_dev_xfermask(dev); + + pio_mask = ata_pack_xfermask(dev->pio_mask, 0, 0); + dma_mask = ata_pack_xfermask(0, dev->mwdma_mask, dev->udma_mask); + dev->pio_mode = ata_xfer_mask2mode(pio_mask); + dev->dma_mode = ata_xfer_mask2mode(dma_mask); + + found = 1; + if (dev->dma_mode) + used_dma = 1; + } + if (!found) + goto out; + + /* step 2: always set host PIO timings */ + for (i = 0; i < ATA_MAX_DEVICES; i++) { + dev = &ap->device[i]; + if (!ata_dev_enabled(dev)) + continue; + + if (!dev->pio_mode) { + ata_dev_printk(dev, KERN_WARNING, "no PIO support\n"); + rc = -EINVAL; + goto out; + } + + dev->xfer_mode = dev->pio_mode; + dev->xfer_shift = ATA_SHIFT_PIO; + if (ap->ops->set_piomode) + ap->ops->set_piomode(ap, dev); + } + + /* step 3: set host DMA timings */ + for (i = 0; i < ATA_MAX_DEVICES; i++) { + dev = &ap->device[i]; + + if (!ata_dev_enabled(dev) || !dev->dma_mode) + continue; + + dev->xfer_mode = dev->dma_mode; + dev->xfer_shift = ata_xfer_mode2shift(dev->dma_mode); + if (ap->ops->set_dmamode) + ap->ops->set_dmamode(ap, dev); + } + + /* step 4: update devices' xfer mode */ + for (i = 0; i < ATA_MAX_DEVICES; i++) { + dev = &ap->device[i]; + + /* don't udpate suspended devices' xfer mode */ + if (!ata_dev_ready(dev)) + continue; + + rc = ata_dev_set_mode(dev); + if (rc) + goto out; + } + + /* Record simplex status. If we selected DMA then the other + * host channels are not permitted to do so. + */ + if (used_dma && (ap->host->flags & ATA_HOST_SIMPLEX)) + ap->host->simplex_claimed = 1; + + /* step5: chip specific finalisation */ + if (ap->ops->post_set_mode) + ap->ops->post_set_mode(ap); + + out: + if (rc) + *r_failed_dev = dev; + return rc; +} + +/** + * ata_tf_to_host - issue ATA taskfile to host controller + * @ap: port to which command is being issued + * @tf: ATA taskfile register set + * + * Issues ATA taskfile register set to ATA host controller, + * with proper synchronization with interrupt handler and + * other threads. + * + * LOCKING: + * spin_lock_irqsave(host lock) + */ + +static inline void ata_tf_to_host(struct ata_port *ap, + const struct ata_taskfile *tf) +{ + ap->ops->tf_load(ap, tf); + ap->ops->exec_command(ap, tf); +} + +/** + * ata_busy_sleep - sleep until BSY clears, or timeout + * @ap: port containing status register to be polled + * @tmout_pat: impatience timeout + * @tmout: overall timeout + * + * Sleep until ATA Status register bit BSY clears, + * or a timeout occurs. + * + * LOCKING: None. + */ + +unsigned int ata_busy_sleep (struct ata_port *ap, + unsigned long tmout_pat, unsigned long tmout) +{ + unsigned long timer_start, timeout; + u8 status; + + status = ata_busy_wait(ap, ATA_BUSY, 300); + timer_start = jiffies; + timeout = timer_start + tmout_pat; + while ((status & ATA_BUSY) && (time_before(jiffies, timeout))) { + msleep(50); + status = ata_busy_wait(ap, ATA_BUSY, 3); + } + + if (status & ATA_BUSY) + ata_port_printk(ap, KERN_WARNING, + "port is slow to respond, please be patient\n"); + + timeout = timer_start + tmout; + while ((status & ATA_BUSY) && (time_before(jiffies, timeout))) { + msleep(50); + status = ata_chk_status(ap); + } + + if (status & ATA_BUSY) { + ata_port_printk(ap, KERN_ERR, "port failed to respond " + "(%lu secs)\n", tmout / HZ); + return 1; + } + + return 0; +} + +static void ata_bus_post_reset(struct ata_port *ap, unsigned int devmask) +{ + struct ata_ioports *ioaddr = &ap->ioaddr; + unsigned int dev0 = devmask & (1 << 0); + unsigned int dev1 = devmask & (1 << 1); + unsigned long timeout; + + /* if device 0 was found in ata_devchk, wait for its + * BSY bit to clear + */ + if (dev0) + ata_busy_sleep(ap, ATA_TMOUT_BOOT_QUICK, ATA_TMOUT_BOOT); + + /* if device 1 was found in ata_devchk, wait for + * register access, then wait for BSY to clear + */ + timeout = jiffies + ATA_TMOUT_BOOT; + while (dev1) { + u8 nsect, lbal; + + ap->ops->dev_select(ap, 1); + if (ap->flags & ATA_FLAG_MMIO) { + nsect = readb((void __iomem *) ioaddr->nsect_addr); + lbal = readb((void __iomem *) ioaddr->lbal_addr); + } else { + nsect = inb(ioaddr->nsect_addr); + lbal = inb(ioaddr->lbal_addr); + } + if ((nsect == 1) && (lbal == 1)) + break; + if (time_after(jiffies, timeout)) { + dev1 = 0; + break; + } + msleep(50); /* give drive a breather */ + } + if (dev1) + ata_busy_sleep(ap, ATA_TMOUT_BOOT_QUICK, ATA_TMOUT_BOOT); + + /* is all this really necessary? */ + ap->ops->dev_select(ap, 0); + if (dev1) + ap->ops->dev_select(ap, 1); + if (dev0) + ap->ops->dev_select(ap, 0); +} + +static unsigned int ata_bus_softreset(struct ata_port *ap, + unsigned int devmask) +{ + struct ata_ioports *ioaddr = &ap->ioaddr; + + DPRINTK("ata%u: bus reset via SRST\n", ap->id); + + /* software reset. causes dev0 to be selected */ + if (ap->flags & ATA_FLAG_MMIO) { + writeb(ap->ctl, (void __iomem *) ioaddr->ctl_addr); + udelay(20); /* FIXME: flush */ + writeb(ap->ctl | ATA_SRST, (void __iomem *) ioaddr->ctl_addr); + udelay(20); /* FIXME: flush */ + writeb(ap->ctl, (void __iomem *) ioaddr->ctl_addr); + } else { + outb(ap->ctl, ioaddr->ctl_addr); + udelay(10); + outb(ap->ctl | ATA_SRST, ioaddr->ctl_addr); + udelay(10); + outb(ap->ctl, ioaddr->ctl_addr); + } + + /* spec mandates ">= 2ms" before checking status. + * We wait 150ms, because that was the magic delay used for + * ATAPI devices in Hale Landis's ATADRVR, for the period of time + * between when the ATA command register is written, and then + * status is checked. Because waiting for "a while" before + * checking status is fine, post SRST, we perform this magic + * delay here as well. + * + * Old drivers/ide uses the 2mS rule and then waits for ready + */ + msleep(150); + + /* Before we perform post reset processing we want to see if + * the bus shows 0xFF because the odd clown forgets the D7 + * pulldown resistor. + */ + if (ata_check_status(ap) == 0xFF) { + ata_port_printk(ap, KERN_ERR, "SRST failed (status 0xFF)\n"); + return AC_ERR_OTHER; + } + + ata_bus_post_reset(ap, devmask); + + return 0; +} + +/** + * ata_bus_reset - reset host port and associated ATA channel + * @ap: port to reset + * + * This is typically the first time we actually start issuing + * commands to the ATA channel. We wait for BSY to clear, then + * issue EXECUTE DEVICE DIAGNOSTIC command, polling for its + * result. Determine what devices, if any, are on the channel + * by looking at the device 0/1 error register. Look at the signature + * stored in each device's taskfile registers, to determine if + * the device is ATA or ATAPI. + * + * LOCKING: + * PCI/etc. bus probe sem. + * Obtains host lock. + * + * SIDE EFFECTS: + * Sets ATA_FLAG_DISABLED if bus reset fails. + */ + +void ata_bus_reset(struct ata_port *ap) +{ + struct ata_ioports *ioaddr = &ap->ioaddr; + unsigned int slave_possible = ap->flags & ATA_FLAG_SLAVE_POSS; + u8 err; + unsigned int dev0, dev1 = 0, devmask = 0; + + DPRINTK("ENTER, host %u, port %u\n", ap->id, ap->port_no); + + /* determine if device 0/1 are present */ + if (ap->flags & ATA_FLAG_SATA_RESET) + dev0 = 1; + else { + dev0 = ata_devchk(ap, 0); + if (slave_possible) + dev1 = ata_devchk(ap, 1); + } + + if (dev0) + devmask |= (1 << 0); + if (dev1) + devmask |= (1 << 1); + + /* select device 0 again */ + ap->ops->dev_select(ap, 0); + + /* issue bus reset */ + if (ap->flags & ATA_FLAG_SRST) + if (ata_bus_softreset(ap, devmask)) + goto err_out; + + /* + * determine by signature whether we have ATA or ATAPI devices + */ + ap->device[0].class = ata_dev_try_classify(ap, 0, &err); + if ((slave_possible) && (err != 0x81)) + ap->device[1].class = ata_dev_try_classify(ap, 1, &err); + + /* re-enable interrupts */ + if (ap->ioaddr.ctl_addr) /* FIXME: hack. create a hook instead */ + ata_irq_on(ap); + + /* is double-select really necessary? */ + if (ap->device[1].class != ATA_DEV_NONE) + ap->ops->dev_select(ap, 1); + if (ap->device[0].class != ATA_DEV_NONE) + ap->ops->dev_select(ap, 0); + + /* if no devices were detected, disable this port */ + if ((ap->device[0].class == ATA_DEV_NONE) && + (ap->device[1].class == ATA_DEV_NONE)) + goto err_out; + + if (ap->flags & (ATA_FLAG_SATA_RESET | ATA_FLAG_SRST)) { + /* set up device control for ATA_FLAG_SATA_RESET */ + if (ap->flags & ATA_FLAG_MMIO) + writeb(ap->ctl, (void __iomem *) ioaddr->ctl_addr); + else + outb(ap->ctl, ioaddr->ctl_addr); + } + + DPRINTK("EXIT\n"); + return; + +err_out: + ata_port_printk(ap, KERN_ERR, "disabling port\n"); + ap->ops->port_disable(ap); + + DPRINTK("EXIT\n"); +} + +/** + * sata_phy_debounce - debounce SATA phy status + * @ap: ATA port to debounce SATA phy status for + * @params: timing parameters { interval, duratinon, timeout } in msec + * + * Make sure SStatus of @ap reaches stable state, determined by + * holding the same value where DET is not 1 for @duration polled + * every @interval, before @timeout. Timeout constraints the + * beginning of the stable state. Because, after hot unplugging, + * DET gets stuck at 1 on some controllers, this functions waits + * until timeout then returns 0 if DET is stable at 1. + * + * LOCKING: + * Kernel thread context (may sleep) + * + * RETURNS: + * 0 on success, -errno on failure. + */ +int sata_phy_debounce(struct ata_port *ap, const unsigned long *params) +{ + unsigned long interval_msec = params[0]; + unsigned long duration = params[1] * HZ / 1000; + unsigned long timeout = jiffies + params[2] * HZ / 1000; + unsigned long last_jiffies; + u32 last, cur; + int rc; + + if ((rc = sata_scr_read(ap, SCR_STATUS, &cur))) + return rc; + cur &= 0xf; + + last = cur; + last_jiffies = jiffies; + + while (1) { + msleep(interval_msec); + if ((rc = sata_scr_read(ap, SCR_STATUS, &cur))) + return rc; + cur &= 0xf; + + /* DET stable? */ + if (cur == last) { + if (cur == 1 && time_before(jiffies, timeout)) + continue; + if (time_after(jiffies, last_jiffies + duration)) + return 0; + continue; + } + + /* unstable, start over */ + last = cur; + last_jiffies = jiffies; + + /* check timeout */ + if (time_after(jiffies, timeout)) + return -EBUSY; + } +} + +/** + * sata_phy_resume - resume SATA phy + * @ap: ATA port to resume SATA phy for + * @params: timing parameters { interval, duratinon, timeout } in msec + * + * Resume SATA phy of @ap and debounce it. + * + * LOCKING: + * Kernel thread context (may sleep) + * + * RETURNS: + * 0 on success, -errno on failure. + */ +int sata_phy_resume(struct ata_port *ap, const unsigned long *params) +{ + u32 scontrol; + int rc; + + if ((rc = sata_scr_read(ap, SCR_CONTROL, &scontrol))) + return rc; + + scontrol = (scontrol & 0x0f0) | 0x300; + + if ((rc = sata_scr_write(ap, SCR_CONTROL, scontrol))) + return rc; + + /* Some PHYs react badly if SStatus is pounded immediately + * after resuming. Delay 200ms before debouncing. + */ + msleep(200); + + return sata_phy_debounce(ap, params); +} + +static void ata_wait_spinup(struct ata_port *ap) +{ + struct ata_eh_context *ehc = &ap->eh_context; + unsigned long end, secs; + int rc; + + /* first, debounce phy if SATA */ + if (ap->cbl == ATA_CBL_SATA) { + rc = sata_phy_debounce(ap, sata_deb_timing_hotplug); + + /* if debounced successfully and offline, no need to wait */ + if ((rc == 0 || rc == -EOPNOTSUPP) && ata_port_offline(ap)) + return; + } + + /* okay, let's give the drive time to spin up */ + end = ehc->i.hotplug_timestamp + ATA_SPINUP_WAIT * HZ / 1000; + secs = ((end - jiffies) + HZ - 1) / HZ; + + if (time_after(jiffies, end)) + return; + + if (secs > 5) + ata_port_printk(ap, KERN_INFO, "waiting for device to spin up " + "(%lu secs)\n", secs); + + schedule_timeout_uninterruptible(end - jiffies); +} + +/** + * ata_std_prereset - prepare for reset + * @ap: ATA port to be reset + * + * @ap is about to be reset. Initialize it. + * + * LOCKING: + * Kernel thread context (may sleep) + * + * RETURNS: + * 0 on success, -errno otherwise. + */ +int ata_std_prereset(struct ata_port *ap) +{ + struct ata_eh_context *ehc = &ap->eh_context; + const unsigned long *timing = sata_ehc_deb_timing(ehc); + int rc; + + /* handle link resume & hotplug spinup */ + if ((ehc->i.flags & ATA_EHI_RESUME_LINK) && + (ap->flags & ATA_FLAG_HRST_TO_RESUME)) + ehc->i.action |= ATA_EH_HARDRESET; + + if ((ehc->i.flags & ATA_EHI_HOTPLUGGED) && + (ap->flags & ATA_FLAG_SKIP_D2H_BSY)) + ata_wait_spinup(ap); + + /* if we're about to do hardreset, nothing more to do */ + if (ehc->i.action & ATA_EH_HARDRESET) + return 0; + + /* if SATA, resume phy */ + if (ap->cbl == ATA_CBL_SATA) { + rc = sata_phy_resume(ap, timing); + if (rc && rc != -EOPNOTSUPP) { + /* phy resume failed */ + ata_port_printk(ap, KERN_WARNING, "failed to resume " + "link for reset (errno=%d)\n", rc); + return rc; + } + } + + /* Wait for !BSY if the controller can wait for the first D2H + * Reg FIS and we don't know that no device is attached. + */ + if (!(ap->flags & ATA_FLAG_SKIP_D2H_BSY) && !ata_port_offline(ap)) + ata_busy_sleep(ap, ATA_TMOUT_BOOT_QUICK, ATA_TMOUT_BOOT); + + return 0; +} + +/** + * ata_std_softreset - reset host port via ATA SRST + * @ap: port to reset + * @classes: resulting classes of attached devices + * + * Reset host port using ATA SRST. + * + * LOCKING: + * Kernel thread context (may sleep) + * + * RETURNS: + * 0 on success, -errno otherwise. + */ +int ata_std_softreset(struct ata_port *ap, unsigned int *classes) +{ + unsigned int slave_possible = ap->flags & ATA_FLAG_SLAVE_POSS; + unsigned int devmask = 0, err_mask; + u8 err; + + DPRINTK("ENTER\n"); + + if (ata_port_offline(ap)) { + classes[0] = ATA_DEV_NONE; + goto out; + } + + /* determine if device 0/1 are present */ + if (ata_devchk(ap, 0)) + devmask |= (1 << 0); + if (slave_possible && ata_devchk(ap, 1)) + devmask |= (1 << 1); + + /* select device 0 again */ + ap->ops->dev_select(ap, 0); + + /* issue bus reset */ + DPRINTK("about to softreset, devmask=%x\n", devmask); + err_mask = ata_bus_softreset(ap, devmask); + if (err_mask) { + ata_port_printk(ap, KERN_ERR, "SRST failed (err_mask=0x%x)\n", + err_mask); + return -EIO; + } + + /* determine by signature whether we have ATA or ATAPI devices */ + classes[0] = ata_dev_try_classify(ap, 0, &err); + if (slave_possible && err != 0x81) + classes[1] = ata_dev_try_classify(ap, 1, &err); + + out: + DPRINTK("EXIT, classes[0]=%u [1]=%u\n", classes[0], classes[1]); + return 0; +} + +/** + * sata_std_hardreset - reset host port via SATA phy reset + * @ap: port to reset + * @class: resulting class of attached device + * + * SATA phy-reset host port using DET bits of SControl register. + * + * LOCKING: + * Kernel thread context (may sleep) + * + * RETURNS: + * 0 on success, -errno otherwise. + */ +int sata_std_hardreset(struct ata_port *ap, unsigned int *class) +{ + struct ata_eh_context *ehc = &ap->eh_context; + const unsigned long *timing = sata_ehc_deb_timing(ehc); + u32 scontrol; + int rc; + + DPRINTK("ENTER\n"); + + if (sata_set_spd_needed(ap)) { + /* SATA spec says nothing about how to reconfigure + * spd. To be on the safe side, turn off phy during + * reconfiguration. This works for at least ICH7 AHCI + * and Sil3124. + */ + if ((rc = sata_scr_read(ap, SCR_CONTROL, &scontrol))) + return rc; + + scontrol = (scontrol & 0x0f0) | 0x304; + + if ((rc = sata_scr_write(ap, SCR_CONTROL, scontrol))) + return rc; + + sata_set_spd(ap); + } + + /* issue phy wake/reset */ + if ((rc = sata_scr_read(ap, SCR_CONTROL, &scontrol))) + return rc; + + scontrol = (scontrol & 0x0f0) | 0x301; + + if ((rc = sata_scr_write_flush(ap, SCR_CONTROL, scontrol))) + return rc; + + /* Couldn't find anything in SATA I/II specs, but AHCI-1.1 + * 10.4.2 says at least 1 ms. + */ + msleep(1); + + /* bring phy back */ + sata_phy_resume(ap, timing); + + /* TODO: phy layer with polling, timeouts, etc. */ + if (ata_port_offline(ap)) { + *class = ATA_DEV_NONE; + DPRINTK("EXIT, link offline\n"); + return 0; + } + + if (ata_busy_sleep(ap, ATA_TMOUT_BOOT_QUICK, ATA_TMOUT_BOOT)) { + ata_port_printk(ap, KERN_ERR, + "COMRESET failed (device not ready)\n"); + return -EIO; + } + + ap->ops->dev_select(ap, 0); /* probably unnecessary */ + + *class = ata_dev_try_classify(ap, 0, NULL); + + DPRINTK("EXIT, class=%u\n", *class); + return 0; +} + +/** + * ata_std_postreset - standard postreset callback + * @ap: the target ata_port + * @classes: classes of attached devices + * + * This function is invoked after a successful reset. Note that + * the device might have been reset more than once using + * different reset methods before postreset is invoked. + * + * LOCKING: + * Kernel thread context (may sleep) + */ +void ata_std_postreset(struct ata_port *ap, unsigned int *classes) +{ + u32 serror; + + DPRINTK("ENTER\n"); + + /* print link status */ + sata_print_link_status(ap); + + /* clear SError */ + if (sata_scr_read(ap, SCR_ERROR, &serror) == 0) + sata_scr_write(ap, SCR_ERROR, serror); + + /* re-enable interrupts */ + if (!ap->ops->error_handler) { + /* FIXME: hack. create a hook instead */ + if (ap->ioaddr.ctl_addr) + ata_irq_on(ap); + } + + /* is double-select really necessary? */ + if (classes[0] != ATA_DEV_NONE) + ap->ops->dev_select(ap, 1); + if (classes[1] != ATA_DEV_NONE) + ap->ops->dev_select(ap, 0); + + /* bail out if no device is present */ + if (classes[0] == ATA_DEV_NONE && classes[1] == ATA_DEV_NONE) { + DPRINTK("EXIT, no device\n"); + return; + } + + /* set up device control */ + if (ap->ioaddr.ctl_addr) { + if (ap->flags & ATA_FLAG_MMIO) + writeb(ap->ctl, (void __iomem *) ap->ioaddr.ctl_addr); + else + outb(ap->ctl, ap->ioaddr.ctl_addr); + } + + DPRINTK("EXIT\n"); +} + +/** + * ata_dev_same_device - Determine whether new ID matches configured device + * @dev: device to compare against + * @new_class: class of the new device + * @new_id: IDENTIFY page of the new device + * + * Compare @new_class and @new_id against @dev and determine + * whether @dev is the device indicated by @new_class and + * @new_id. + * + * LOCKING: + * None. + * + * RETURNS: + * 1 if @dev matches @new_class and @new_id, 0 otherwise. + */ +static int ata_dev_same_device(struct ata_device *dev, unsigned int new_class, + const u16 *new_id) +{ + const u16 *old_id = dev->id; + unsigned char model[2][41], serial[2][21]; + u64 new_n_sectors; + + if (dev->class != new_class) { + ata_dev_printk(dev, KERN_INFO, "class mismatch %d != %d\n", + dev->class, new_class); + return 0; + } + + ata_id_c_string(old_id, model[0], ATA_ID_PROD_OFS, sizeof(model[0])); + ata_id_c_string(new_id, model[1], ATA_ID_PROD_OFS, sizeof(model[1])); + ata_id_c_string(old_id, serial[0], ATA_ID_SERNO_OFS, sizeof(serial[0])); + ata_id_c_string(new_id, serial[1], ATA_ID_SERNO_OFS, sizeof(serial[1])); + new_n_sectors = ata_id_n_sectors(new_id); + + if (strcmp(model[0], model[1])) { + ata_dev_printk(dev, KERN_INFO, "model number mismatch " + "'%s' != '%s'\n", model[0], model[1]); + return 0; + } + + if (strcmp(serial[0], serial[1])) { + ata_dev_printk(dev, KERN_INFO, "serial number mismatch " + "'%s' != '%s'\n", serial[0], serial[1]); + return 0; + } + + if (dev->class == ATA_DEV_ATA && dev->n_sectors != new_n_sectors) { + ata_dev_printk(dev, KERN_INFO, "n_sectors mismatch " + "%llu != %llu\n", + (unsigned long long)dev->n_sectors, + (unsigned long long)new_n_sectors); + return 0; + } + + return 1; +} + +/** + * ata_dev_revalidate - Revalidate ATA device + * @dev: device to revalidate + * @post_reset: is this revalidation after reset? + * + * Re-read IDENTIFY page and make sure @dev is still attached to + * the port. + * + * LOCKING: + * Kernel thread context (may sleep) + * + * RETURNS: + * 0 on success, negative errno otherwise + */ +int ata_dev_revalidate(struct ata_device *dev, int post_reset) +{ + unsigned int class = dev->class; + u16 *id = (void *)dev->ap->sector_buf; + int rc; + + if (!ata_dev_enabled(dev)) { + rc = -ENODEV; + goto fail; + } + + /* read ID data */ + rc = ata_dev_read_id(dev, &class, post_reset, id); + if (rc) + goto fail; + + /* is the device still there? */ + if (!ata_dev_same_device(dev, class, id)) { + rc = -ENODEV; + goto fail; + } + + memcpy(dev->id, id, sizeof(id[0]) * ATA_ID_WORDS); + + /* configure device according to the new ID */ + rc = ata_dev_configure(dev, 0); + if (rc == 0) + return 0; + + fail: + ata_dev_printk(dev, KERN_ERR, "revalidation failed (errno=%d)\n", rc); + return rc; +} + +static const char * const ata_dma_blacklist [] = { + "WDC AC11000H", NULL, + "WDC AC22100H", NULL, + "WDC AC32500H", NULL, + "WDC AC33100H", NULL, + "WDC AC31600H", NULL, + "WDC AC32100H", "24.09P07", + "WDC AC23200L", "21.10N21", + "Compaq CRD-8241B", NULL, + "CRD-8400B", NULL, + "CRD-8480B", NULL, + "CRD-8482B", NULL, + "CRD-84", NULL, + "SanDisk SDP3B", NULL, + "SanDisk SDP3B-64", NULL, + "SANYO CD-ROM CRD", NULL, + "HITACHI CDR-8", NULL, + "HITACHI CDR-8335", NULL, + "HITACHI CDR-8435", NULL, + "Toshiba CD-ROM XM-6202B", NULL, + "TOSHIBA CD-ROM XM-1702BC", NULL, + "CD-532E-A", NULL, + "E-IDE CD-ROM CR-840", NULL, + "CD-ROM Drive/F5A", NULL, + "WPI CDD-820", NULL, + "SAMSUNG CD-ROM SC-148C", NULL, + "SAMSUNG CD-ROM SC", NULL, + "SanDisk SDP3B-64", NULL, + "ATAPI CD-ROM DRIVE 40X MAXIMUM",NULL, + "_NEC DV5800A", NULL, + "SAMSUNG CD-ROM SN-124", "N001" +}; + +static int ata_strim(char *s, size_t len) +{ + len = strnlen(s, len); + + /* ATAPI specifies that empty space is blank-filled; remove blanks */ + while ((len > 0) && (s[len - 1] == ' ')) { + len--; + s[len] = 0; + } + return len; +} + +static int ata_dma_blacklisted(const struct ata_device *dev) +{ + unsigned char model_num[40]; + unsigned char model_rev[16]; + unsigned int nlen, rlen; + int i; + + /* We don't support polling DMA. + * DMA blacklist those ATAPI devices with CDB-intr (and use PIO) + * if the LLDD handles only interrupts in the HSM_ST_LAST state. + */ + if ((dev->ap->flags & ATA_FLAG_PIO_POLLING) && + (dev->flags & ATA_DFLAG_CDB_INTR)) + return 1; + + ata_id_string(dev->id, model_num, ATA_ID_PROD_OFS, + sizeof(model_num)); + ata_id_string(dev->id, model_rev, ATA_ID_FW_REV_OFS, + sizeof(model_rev)); + nlen = ata_strim(model_num, sizeof(model_num)); + rlen = ata_strim(model_rev, sizeof(model_rev)); + + for (i = 0; i < ARRAY_SIZE(ata_dma_blacklist); i += 2) { + if (!strncmp(ata_dma_blacklist[i], model_num, nlen)) { + if (ata_dma_blacklist[i+1] == NULL) + return 1; + if (!strncmp(ata_dma_blacklist[i], model_rev, rlen)) + return 1; + } + } + return 0; +} + +/** + * ata_dev_xfermask - Compute supported xfermask of the given device + * @dev: Device to compute xfermask for + * + * Compute supported xfermask of @dev and store it in + * dev->*_mask. This function is responsible for applying all + * known limits including host controller limits, device + * blacklist, etc... + * + * LOCKING: + * None. + */ +static void ata_dev_xfermask(struct ata_device *dev) +{ + struct ata_port *ap = dev->ap; + struct ata_host *host = ap->host; + unsigned long xfer_mask; + + /* controller modes available */ + xfer_mask = ata_pack_xfermask(ap->pio_mask, + ap->mwdma_mask, ap->udma_mask); + + /* Apply cable rule here. Don't apply it early because when + * we handle hot plug the cable type can itself change. + */ + if (ap->cbl == ATA_CBL_PATA40) + xfer_mask &= ~(0xF8 << ATA_SHIFT_UDMA); + + xfer_mask &= ata_pack_xfermask(dev->pio_mask, + dev->mwdma_mask, dev->udma_mask); + xfer_mask &= ata_id_xfermask(dev->id); + + /* + * CFA Advanced TrueIDE timings are not allowed on a shared + * cable + */ + if (ata_dev_pair(dev)) { + /* No PIO5 or PIO6 */ + xfer_mask &= ~(0x03 << (ATA_SHIFT_PIO + 5)); + /* No MWDMA3 or MWDMA 4 */ + xfer_mask &= ~(0x03 << (ATA_SHIFT_MWDMA + 3)); + } + + if (ata_dma_blacklisted(dev)) { + xfer_mask &= ~(ATA_MASK_MWDMA | ATA_MASK_UDMA); + ata_dev_printk(dev, KERN_WARNING, + "device is on DMA blacklist, disabling DMA\n"); + } + + if ((host->flags & ATA_HOST_SIMPLEX) && host->simplex_claimed) { + xfer_mask &= ~(ATA_MASK_MWDMA | ATA_MASK_UDMA); + ata_dev_printk(dev, KERN_WARNING, "simplex DMA is claimed by " + "other device, disabling DMA\n"); + } + + if (ap->ops->mode_filter) + xfer_mask = ap->ops->mode_filter(ap, dev, xfer_mask); + + ata_unpack_xfermask(xfer_mask, &dev->pio_mask, + &dev->mwdma_mask, &dev->udma_mask); +} + +/** + * ata_dev_set_xfermode - Issue SET FEATURES - XFER MODE command + * @dev: Device to which command will be sent + * + * Issue SET FEATURES - XFER MODE command to device @dev + * on port @ap. + * + * LOCKING: + * PCI/etc. bus probe sem. + * + * RETURNS: + * 0 on success, AC_ERR_* mask otherwise. + */ + +static unsigned int ata_dev_set_xfermode(struct ata_device *dev) +{ + struct ata_taskfile tf; + unsigned int err_mask; + + /* set up set-features taskfile */ + DPRINTK("set features - xfer mode\n"); + + ata_tf_init(dev, &tf); + tf.command = ATA_CMD_SET_FEATURES; + tf.feature = SETFEATURES_XFER; + tf.flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE; + tf.protocol = ATA_PROT_NODATA; + tf.nsect = dev->xfer_mode; + + err_mask = ata_exec_internal(dev, &tf, NULL, DMA_NONE, NULL, 0); + + DPRINTK("EXIT, err_mask=%x\n", err_mask); + return err_mask; +} + +/** + * ata_dev_init_params - Issue INIT DEV PARAMS command + * @dev: Device to which command will be sent + * @heads: Number of heads (taskfile parameter) + * @sectors: Number of sectors (taskfile parameter) + * + * LOCKING: + * Kernel thread context (may sleep) + * + * RETURNS: + * 0 on success, AC_ERR_* mask otherwise. + */ +static unsigned int ata_dev_init_params(struct ata_device *dev, + u16 heads, u16 sectors) +{ + struct ata_taskfile tf; + unsigned int err_mask; + + /* Number of sectors per track 1-255. Number of heads 1-16 */ + if (sectors < 1 || sectors > 255 || heads < 1 || heads > 16) + return AC_ERR_INVALID; + + /* set up init dev params taskfile */ + DPRINTK("init dev params \n"); + + ata_tf_init(dev, &tf); + tf.command = ATA_CMD_INIT_DEV_PARAMS; + tf.flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE; + tf.protocol = ATA_PROT_NODATA; + tf.nsect = sectors; + tf.device |= (heads - 1) & 0x0f; /* max head = num. of heads - 1 */ + + err_mask = ata_exec_internal(dev, &tf, NULL, DMA_NONE, NULL, 0); + + DPRINTK("EXIT, err_mask=%x\n", err_mask); + return err_mask; +} + +/** + * ata_sg_clean - Unmap DMA memory associated with command + * @qc: Command containing DMA memory to be released + * + * Unmap all mapped DMA memory associated with this command. + * + * LOCKING: + * spin_lock_irqsave(host lock) + */ + +static void ata_sg_clean(struct ata_queued_cmd *qc) +{ + struct ata_port *ap = qc->ap; + struct scatterlist *sg = qc->__sg; + int dir = qc->dma_dir; + void *pad_buf = NULL; + + WARN_ON(!(qc->flags & ATA_QCFLAG_DMAMAP)); + WARN_ON(sg == NULL); + + if (qc->flags & ATA_QCFLAG_SINGLE) + WARN_ON(qc->n_elem > 1); + + VPRINTK("unmapping %u sg elements\n", qc->n_elem); + + /* if we padded the buffer out to 32-bit bound, and data + * xfer direction is from-device, we must copy from the + * pad buffer back into the supplied buffer + */ + if (qc->pad_len && !(qc->tf.flags & ATA_TFLAG_WRITE)) + pad_buf = ap->pad + (qc->tag * ATA_DMA_PAD_SZ); + + if (qc->flags & ATA_QCFLAG_SG) { + if (qc->n_elem) + dma_unmap_sg(ap->dev, sg, qc->n_elem, dir); + /* restore last sg */ + sg[qc->orig_n_elem - 1].length += qc->pad_len; + if (pad_buf) { + struct scatterlist *psg = &qc->pad_sgent; + void *addr = kmap_atomic(psg->page, KM_IRQ0); + memcpy(addr + psg->offset, pad_buf, qc->pad_len); + kunmap_atomic(addr, KM_IRQ0); + } + } else { + if (qc->n_elem) + dma_unmap_single(ap->dev, + sg_dma_address(&sg[0]), sg_dma_len(&sg[0]), + dir); + /* restore sg */ + sg->length += qc->pad_len; + if (pad_buf) + memcpy(qc->buf_virt + sg->length - qc->pad_len, + pad_buf, qc->pad_len); + } + + qc->flags &= ~ATA_QCFLAG_DMAMAP; + qc->__sg = NULL; +} + +/** + * ata_fill_sg - Fill PCI IDE PRD table + * @qc: Metadata associated with taskfile to be transferred + * + * Fill PCI IDE PRD (scatter-gather) table with segments + * associated with the current disk command. + * + * LOCKING: + * spin_lock_irqsave(host lock) + * + */ +static void ata_fill_sg(struct ata_queued_cmd *qc) +{ + struct ata_port *ap = qc->ap; + struct scatterlist *sg; + unsigned int idx; + + WARN_ON(qc->__sg == NULL); + WARN_ON(qc->n_elem == 0 && qc->pad_len == 0); + + idx = 0; + ata_for_each_sg(sg, qc) { + u32 addr, offset; + u32 sg_len, len; + + /* determine if physical DMA addr spans 64K boundary. + * Note h/w doesn't support 64-bit, so we unconditionally + * truncate dma_addr_t to u32. + */ + addr = (u32) sg_dma_address(sg); + sg_len = sg_dma_len(sg); + + while (sg_len) { + offset = addr & 0xffff; + len = sg_len; + if ((offset + sg_len) > 0x10000) + len = 0x10000 - offset; + + ap->prd[idx].addr = cpu_to_le32(addr); + ap->prd[idx].flags_len = cpu_to_le32(len & 0xffff); + VPRINTK("PRD[%u] = (0x%X, 0x%X)\n", idx, addr, len); + + idx++; + sg_len -= len; + addr += len; + } + } + + if (idx) + ap->prd[idx - 1].flags_len |= cpu_to_le32(ATA_PRD_EOT); +} +/** + * ata_check_atapi_dma - Check whether ATAPI DMA can be supported + * @qc: Metadata associated with taskfile to check + * + * Allow low-level driver to filter ATA PACKET commands, returning + * a status indicating whether or not it is OK to use DMA for the + * supplied PACKET command. + * + * LOCKING: + * spin_lock_irqsave(host lock) + * + * RETURNS: 0 when ATAPI DMA can be used + * nonzero otherwise + */ +int ata_check_atapi_dma(struct ata_queued_cmd *qc) +{ + struct ata_port *ap = qc->ap; + int rc = 0; /* Assume ATAPI DMA is OK by default */ + + if (ap->ops->check_atapi_dma) + rc = ap->ops->check_atapi_dma(qc); + + return rc; +} +/** + * ata_qc_prep - Prepare taskfile for submission + * @qc: Metadata associated with taskfile to be prepared + * + * Prepare ATA taskfile for submission. + * + * LOCKING: + * spin_lock_irqsave(host lock) + */ +void ata_qc_prep(struct ata_queued_cmd *qc) +{ + if (!(qc->flags & ATA_QCFLAG_DMAMAP)) + return; + + ata_fill_sg(qc); +} + +void ata_noop_qc_prep(struct ata_queued_cmd *qc) { } + +/** + * ata_sg_init_one - Associate command with memory buffer + * @qc: Command to be associated + * @buf: Memory buffer + * @buflen: Length of memory buffer, in bytes. + * + * Initialize the data-related elements of queued_cmd @qc + * to point to a single memory buffer, @buf of byte length @buflen. + * + * LOCKING: + * spin_lock_irqsave(host lock) + */ + +void ata_sg_init_one(struct ata_queued_cmd *qc, void *buf, unsigned int buflen) +{ + struct scatterlist *sg; + + qc->flags |= ATA_QCFLAG_SINGLE; + + memset(&qc->sgent, 0, sizeof(qc->sgent)); + qc->__sg = &qc->sgent; + qc->n_elem = 1; + qc->orig_n_elem = 1; + qc->buf_virt = buf; + qc->nbytes = buflen; + + sg = qc->__sg; + sg_init_one(sg, buf, buflen); +} + +/** + * ata_sg_init - Associate command with scatter-gather table. + * @qc: Command to be associated + * @sg: Scatter-gather table. + * @n_elem: Number of elements in s/g table. + * + * Initialize the data-related elements of queued_cmd @qc + * to point to a scatter-gather table @sg, containing @n_elem + * elements. + * + * LOCKING: + * spin_lock_irqsave(host lock) + */ + +void ata_sg_init(struct ata_queued_cmd *qc, struct scatterlist *sg, + unsigned int n_elem) +{ + qc->flags |= ATA_QCFLAG_SG; + qc->__sg = sg; + qc->n_elem = n_elem; + qc->orig_n_elem = n_elem; +} + +/** + * ata_sg_setup_one - DMA-map the memory buffer associated with a command. + * @qc: Command with memory buffer to be mapped. + * + * DMA-map the memory buffer associated with queued_cmd @qc. + * + * LOCKING: + * spin_lock_irqsave(host lock) + * + * RETURNS: + * Zero on success, negative on error. + */ + +static int ata_sg_setup_one(struct ata_queued_cmd *qc) +{ + struct ata_port *ap = qc->ap; + int dir = qc->dma_dir; + struct scatterlist *sg = qc->__sg; + dma_addr_t dma_address; + int trim_sg = 0; + + /* we must lengthen transfers to end on a 32-bit boundary */ + qc->pad_len = sg->length & 3; + if (qc->pad_len) { + void *pad_buf = ap->pad + (qc->tag * ATA_DMA_PAD_SZ); + struct scatterlist *psg = &qc->pad_sgent; + + WARN_ON(qc->dev->class != ATA_DEV_ATAPI); + + memset(pad_buf, 0, ATA_DMA_PAD_SZ); + + if (qc->tf.flags & ATA_TFLAG_WRITE) + memcpy(pad_buf, qc->buf_virt + sg->length - qc->pad_len, + qc->pad_len); + + sg_dma_address(psg) = ap->pad_dma + (qc->tag * ATA_DMA_PAD_SZ); + sg_dma_len(psg) = ATA_DMA_PAD_SZ; + /* trim sg */ + sg->length -= qc->pad_len; + if (sg->length == 0) + trim_sg = 1; + + DPRINTK("padding done, sg->length=%u pad_len=%u\n", + sg->length, qc->pad_len); + } + + if (trim_sg) { + qc->n_elem--; + goto skip_map; + } + + dma_address = dma_map_single(ap->dev, qc->buf_virt, + sg->length, dir); + if (dma_mapping_error(dma_address)) { + /* restore sg */ + sg->length += qc->pad_len; + return -1; + } + + sg_dma_address(sg) = dma_address; + sg_dma_len(sg) = sg->length; + +skip_map: + DPRINTK("mapped buffer of %d bytes for %s\n", sg_dma_len(sg), + qc->tf.flags & ATA_TFLAG_WRITE ? "write" : "read"); + + return 0; +} + +/** + * ata_sg_setup - DMA-map the scatter-gather table associated with a command. + * @qc: Command with scatter-gather table to be mapped. + * + * DMA-map the scatter-gather table associated with queued_cmd @qc. + * + * LOCKING: + * spin_lock_irqsave(host lock) + * + * RETURNS: + * Zero on success, negative on error. + * + */ + +static int ata_sg_setup(struct ata_queued_cmd *qc) +{ + struct ata_port *ap = qc->ap; + struct scatterlist *sg = qc->__sg; + struct scatterlist *lsg = &sg[qc->n_elem - 1]; + int n_elem, pre_n_elem, dir, trim_sg = 0; + + VPRINTK("ENTER, ata%u\n", ap->id); + WARN_ON(!(qc->flags & ATA_QCFLAG_SG)); + + /* we must lengthen transfers to end on a 32-bit boundary */ + qc->pad_len = lsg->length & 3; + if (qc->pad_len) { + void *pad_buf = ap->pad + (qc->tag * ATA_DMA_PAD_SZ); + struct scatterlist *psg = &qc->pad_sgent; + unsigned int offset; + + WARN_ON(qc->dev->class != ATA_DEV_ATAPI); + + memset(pad_buf, 0, ATA_DMA_PAD_SZ); + + /* + * psg->page/offset are used to copy to-be-written + * data in this function or read data in ata_sg_clean. + */ + offset = lsg->offset + lsg->length - qc->pad_len; + psg->page = nth_page(lsg->page, offset >> PAGE_SHIFT); + psg->offset = offset_in_page(offset); + + if (qc->tf.flags & ATA_TFLAG_WRITE) { + void *addr = kmap_atomic(psg->page, KM_IRQ0); + memcpy(pad_buf, addr + psg->offset, qc->pad_len); + kunmap_atomic(addr, KM_IRQ0); + } + + sg_dma_address(psg) = ap->pad_dma + (qc->tag * ATA_DMA_PAD_SZ); + sg_dma_len(psg) = ATA_DMA_PAD_SZ; + /* trim last sg */ + lsg->length -= qc->pad_len; + if (lsg->length == 0) + trim_sg = 1; + + DPRINTK("padding done, sg[%d].length=%u pad_len=%u\n", + qc->n_elem - 1, lsg->length, qc->pad_len); + } + + pre_n_elem = qc->n_elem; + if (trim_sg && pre_n_elem) + pre_n_elem--; + + if (!pre_n_elem) { + n_elem = 0; + goto skip_map; + } + + dir = qc->dma_dir; + n_elem = dma_map_sg(ap->dev, sg, pre_n_elem, dir); + if (n_elem < 1) { + /* restore last sg */ + lsg->length += qc->pad_len; + return -1; + } + + DPRINTK("%d sg elements mapped\n", n_elem); + +skip_map: + qc->n_elem = n_elem; + + return 0; +} + +/** + * swap_buf_le16 - swap halves of 16-bit words in place + * @buf: Buffer to swap + * @buf_words: Number of 16-bit words in buffer. + * + * Swap halves of 16-bit words if needed to convert from + * little-endian byte order to native cpu byte order, or + * vice-versa. + * + * LOCKING: + * Inherited from caller. + */ +void swap_buf_le16(u16 *buf, unsigned int buf_words) +{ +#ifdef __BIG_ENDIAN + unsigned int i; + + for (i = 0; i < buf_words; i++) + buf[i] = le16_to_cpu(buf[i]); +#endif /* __BIG_ENDIAN */ +} + +/** + * ata_mmio_data_xfer - Transfer data by MMIO + * @adev: device for this I/O + * @buf: data buffer + * @buflen: buffer length + * @write_data: read/write + * + * Transfer data from/to the device data register by MMIO. + * + * LOCKING: + * Inherited from caller. + */ + +void ata_mmio_data_xfer(struct ata_device *adev, unsigned char *buf, + unsigned int buflen, int write_data) +{ + struct ata_port *ap = adev->ap; + unsigned int i; + unsigned int words = buflen >> 1; + u16 *buf16 = (u16 *) buf; + void __iomem *mmio = (void __iomem *)ap->ioaddr.data_addr; + + /* Transfer multiple of 2 bytes */ + if (write_data) { + for (i = 0; i < words; i++) + writew(le16_to_cpu(buf16[i]), mmio); + } else { + for (i = 0; i < words; i++) + buf16[i] = cpu_to_le16(readw(mmio)); + } + + /* Transfer trailing 1 byte, if any. */ + if (unlikely(buflen & 0x01)) { + u16 align_buf[1] = { 0 }; + unsigned char *trailing_buf = buf + buflen - 1; + + if (write_data) { + memcpy(align_buf, trailing_buf, 1); + writew(le16_to_cpu(align_buf[0]), mmio); + } else { + align_buf[0] = cpu_to_le16(readw(mmio)); + memcpy(trailing_buf, align_buf, 1); + } + } +} + +/** + * ata_pio_data_xfer - Transfer data by PIO + * @adev: device to target + * @buf: data buffer + * @buflen: buffer length + * @write_data: read/write + * + * Transfer data from/to the device data register by PIO. + * + * LOCKING: + * Inherited from caller. + */ + +void ata_pio_data_xfer(struct ata_device *adev, unsigned char *buf, + unsigned int buflen, int write_data) +{ + struct ata_port *ap = adev->ap; + unsigned int words = buflen >> 1; + + /* Transfer multiple of 2 bytes */ + if (write_data) + outsw(ap->ioaddr.data_addr, buf, words); + else + insw(ap->ioaddr.data_addr, buf, words); + + /* Transfer trailing 1 byte, if any. */ + if (unlikely(buflen & 0x01)) { + u16 align_buf[1] = { 0 }; + unsigned char *trailing_buf = buf + buflen - 1; + + if (write_data) { + memcpy(align_buf, trailing_buf, 1); + outw(le16_to_cpu(align_buf[0]), ap->ioaddr.data_addr); + } else { + align_buf[0] = cpu_to_le16(inw(ap->ioaddr.data_addr)); + memcpy(trailing_buf, align_buf, 1); + } + } +} + +/** + * ata_pio_data_xfer_noirq - Transfer data by PIO + * @adev: device to target + * @buf: data buffer + * @buflen: buffer length + * @write_data: read/write + * + * Transfer data from/to the device data register by PIO. Do the + * transfer with interrupts disabled. + * + * LOCKING: + * Inherited from caller. + */ + +void ata_pio_data_xfer_noirq(struct ata_device *adev, unsigned char *buf, + unsigned int buflen, int write_data) +{ + unsigned long flags; + local_irq_save(flags); + ata_pio_data_xfer(adev, buf, buflen, write_data); + local_irq_restore(flags); +} + + +/** + * ata_pio_sector - Transfer ATA_SECT_SIZE (512 bytes) of data. + * @qc: Command on going + * + * Transfer ATA_SECT_SIZE of data from/to the ATA device. + * + * LOCKING: + * Inherited from caller. + */ + +static void ata_pio_sector(struct ata_queued_cmd *qc) +{ + int do_write = (qc->tf.flags & ATA_TFLAG_WRITE); + struct scatterlist *sg = qc->__sg; + struct ata_port *ap = qc->ap; + struct page *page; + unsigned int offset; + unsigned char *buf; + + if (qc->cursect == (qc->nsect - 1)) + ap->hsm_task_state = HSM_ST_LAST; + + page = sg[qc->cursg].page; + offset = sg[qc->cursg].offset + qc->cursg_ofs * ATA_SECT_SIZE; + + /* get the current page and offset */ + page = nth_page(page, (offset >> PAGE_SHIFT)); + offset %= PAGE_SIZE; + + DPRINTK("data %s\n", qc->tf.flags & ATA_TFLAG_WRITE ? "write" : "read"); + + if (PageHighMem(page)) { + unsigned long flags; + + /* FIXME: use a bounce buffer */ + local_irq_save(flags); + buf = kmap_atomic(page, KM_IRQ0); + + /* do the actual data transfer */ + ap->ops->data_xfer(qc->dev, buf + offset, ATA_SECT_SIZE, do_write); + + kunmap_atomic(buf, KM_IRQ0); + local_irq_restore(flags); + } else { + buf = page_address(page); + ap->ops->data_xfer(qc->dev, buf + offset, ATA_SECT_SIZE, do_write); + } + + qc->cursect++; + qc->cursg_ofs++; + + if ((qc->cursg_ofs * ATA_SECT_SIZE) == (&sg[qc->cursg])->length) { + qc->cursg++; + qc->cursg_ofs = 0; + } +} + +/** + * ata_pio_sectors - Transfer one or many 512-byte sectors. + * @qc: Command on going + * + * Transfer one or many ATA_SECT_SIZE of data from/to the + * ATA device for the DRQ request. + * + * LOCKING: + * Inherited from caller. + */ + +static void ata_pio_sectors(struct ata_queued_cmd *qc) +{ + if (is_multi_taskfile(&qc->tf)) { + /* READ/WRITE MULTIPLE */ + unsigned int nsect; + + WARN_ON(qc->dev->multi_count == 0); + + nsect = min(qc->nsect - qc->cursect, qc->dev->multi_count); + while (nsect--) + ata_pio_sector(qc); + } else + ata_pio_sector(qc); +} + +/** + * atapi_send_cdb - Write CDB bytes to hardware + * @ap: Port to which ATAPI device is attached. + * @qc: Taskfile currently active + * + * When device has indicated its readiness to accept + * a CDB, this function is called. Send the CDB. + * + * LOCKING: + * caller. + */ + +static void atapi_send_cdb(struct ata_port *ap, struct ata_queued_cmd *qc) +{ + /* send SCSI cdb */ + DPRINTK("send cdb\n"); + WARN_ON(qc->dev->cdb_len < 12); + + ap->ops->data_xfer(qc->dev, qc->cdb, qc->dev->cdb_len, 1); + ata_altstatus(ap); /* flush */ + + switch (qc->tf.protocol) { + case ATA_PROT_ATAPI: + ap->hsm_task_state = HSM_ST; + break; + case ATA_PROT_ATAPI_NODATA: + ap->hsm_task_state = HSM_ST_LAST; + break; + case ATA_PROT_ATAPI_DMA: + ap->hsm_task_state = HSM_ST_LAST; + /* initiate bmdma */ + ap->ops->bmdma_start(qc); + break; + } +} + +/** + * __atapi_pio_bytes - Transfer data from/to the ATAPI device. + * @qc: Command on going + * @bytes: number of bytes + * + * Transfer Transfer data from/to the ATAPI device. + * + * LOCKING: + * Inherited from caller. + * + */ + +static void __atapi_pio_bytes(struct ata_queued_cmd *qc, unsigned int bytes) +{ + int do_write = (qc->tf.flags & ATA_TFLAG_WRITE); + struct scatterlist *sg = qc->__sg; + struct ata_port *ap = qc->ap; + struct page *page; + unsigned char *buf; + unsigned int offset, count; + + if (qc->curbytes + bytes >= qc->nbytes) + ap->hsm_task_state = HSM_ST_LAST; + +next_sg: + if (unlikely(qc->cursg >= qc->n_elem)) { + /* + * The end of qc->sg is reached and the device expects + * more data to transfer. In order not to overrun qc->sg + * and fulfill length specified in the byte count register, + * - for read case, discard trailing data from the device + * - for write case, padding zero data to the device + */ + u16 pad_buf[1] = { 0 }; + unsigned int words = bytes >> 1; + unsigned int i; + + if (words) /* warning if bytes > 1 */ + ata_dev_printk(qc->dev, KERN_WARNING, + "%u bytes trailing data\n", bytes); + + for (i = 0; i < words; i++) + ap->ops->data_xfer(qc->dev, (unsigned char*)pad_buf, 2, do_write); + + ap->hsm_task_state = HSM_ST_LAST; + return; + } + + sg = &qc->__sg[qc->cursg]; + + page = sg->page; + offset = sg->offset + qc->cursg_ofs; + + /* get the current page and offset */ + page = nth_page(page, (offset >> PAGE_SHIFT)); + offset %= PAGE_SIZE; + + /* don't overrun current sg */ + count = min(sg->length - qc->cursg_ofs, bytes); + + /* don't cross page boundaries */ + count = min(count, (unsigned int)PAGE_SIZE - offset); + + DPRINTK("data %s\n", qc->tf.flags & ATA_TFLAG_WRITE ? "write" : "read"); + + if (PageHighMem(page)) { + unsigned long flags; + + /* FIXME: use bounce buffer */ + local_irq_save(flags); + buf = kmap_atomic(page, KM_IRQ0); + + /* do the actual data transfer */ + ap->ops->data_xfer(qc->dev, buf + offset, count, do_write); + + kunmap_atomic(buf, KM_IRQ0); + local_irq_restore(flags); + } else { + buf = page_address(page); + ap->ops->data_xfer(qc->dev, buf + offset, count, do_write); + } + + bytes -= count; + qc->curbytes += count; + qc->cursg_ofs += count; + + if (qc->cursg_ofs == sg->length) { + qc->cursg++; + qc->cursg_ofs = 0; + } + + if (bytes) + goto next_sg; +} + +/** + * atapi_pio_bytes - Transfer data from/to the ATAPI device. + * @qc: Command on going + * + * Transfer Transfer data from/to the ATAPI device. + * + * LOCKING: + * Inherited from caller. + */ + +static void atapi_pio_bytes(struct ata_queued_cmd *qc) +{ + struct ata_port *ap = qc->ap; + struct ata_device *dev = qc->dev; + unsigned int ireason, bc_lo, bc_hi, bytes; + int i_write, do_write = (qc->tf.flags & ATA_TFLAG_WRITE) ? 1 : 0; + + /* Abuse qc->result_tf for temp storage of intermediate TF + * here to save some kernel stack usage. + * For normal completion, qc->result_tf is not relevant. For + * error, qc->result_tf is later overwritten by ata_qc_complete(). + * So, the correctness of qc->result_tf is not affected. + */ + ap->ops->tf_read(ap, &qc->result_tf); + ireason = qc->result_tf.nsect; + bc_lo = qc->result_tf.lbam; + bc_hi = qc->result_tf.lbah; + bytes = (bc_hi << 8) | bc_lo; + + /* shall be cleared to zero, indicating xfer of data */ + if (ireason & (1 << 0)) + goto err_out; + + /* make sure transfer direction matches expected */ + i_write = ((ireason & (1 << 1)) == 0) ? 1 : 0; + if (do_write != i_write) + goto err_out; + + VPRINTK("ata%u: xfering %d bytes\n", ap->id, bytes); + + __atapi_pio_bytes(qc, bytes); + + return; + +err_out: + ata_dev_printk(dev, KERN_INFO, "ATAPI check failed\n"); + qc->err_mask |= AC_ERR_HSM; + ap->hsm_task_state = HSM_ST_ERR; +} + +/** + * ata_hsm_ok_in_wq - Check if the qc can be handled in the workqueue. + * @ap: the target ata_port + * @qc: qc on going + * + * RETURNS: + * 1 if ok in workqueue, 0 otherwise. + */ + +static inline int ata_hsm_ok_in_wq(struct ata_port *ap, struct ata_queued_cmd *qc) +{ + if (qc->tf.flags & ATA_TFLAG_POLLING) + return 1; + + if (ap->hsm_task_state == HSM_ST_FIRST) { + if (qc->tf.protocol == ATA_PROT_PIO && + (qc->tf.flags & ATA_TFLAG_WRITE)) + return 1; + + if (is_atapi_taskfile(&qc->tf) && + !(qc->dev->flags & ATA_DFLAG_CDB_INTR)) + return 1; + } + + return 0; +} + +/** + * ata_hsm_qc_complete - finish a qc running on standard HSM + * @qc: Command to complete + * @in_wq: 1 if called from workqueue, 0 otherwise + * + * Finish @qc which is running on standard HSM. + * + * LOCKING: + * If @in_wq is zero, spin_lock_irqsave(host lock). + * Otherwise, none on entry and grabs host lock. + */ +static void ata_hsm_qc_complete(struct ata_queued_cmd *qc, int in_wq) +{ + struct ata_port *ap = qc->ap; + unsigned long flags; + + if (ap->ops->error_handler) { + if (in_wq) { + spin_lock_irqsave(ap->lock, flags); + + /* EH might have kicked in while host lock is + * released. + */ + qc = ata_qc_from_tag(ap, qc->tag); + if (qc) { + if (likely(!(qc->err_mask & AC_ERR_HSM))) { + ata_irq_on(ap); + ata_qc_complete(qc); + } else + ata_port_freeze(ap); + } + + spin_unlock_irqrestore(ap->lock, flags); + } else { + if (likely(!(qc->err_mask & AC_ERR_HSM))) + ata_qc_complete(qc); + else + ata_port_freeze(ap); + } + } else { + if (in_wq) { + spin_lock_irqsave(ap->lock, flags); + ata_irq_on(ap); + ata_qc_complete(qc); + spin_unlock_irqrestore(ap->lock, flags); + } else + ata_qc_complete(qc); + } + + ata_altstatus(ap); /* flush */ +} + +/** + * ata_hsm_move - move the HSM to the next state. + * @ap: the target ata_port + * @qc: qc on going + * @status: current device status + * @in_wq: 1 if called from workqueue, 0 otherwise + * + * RETURNS: + * 1 when poll next status needed, 0 otherwise. + */ +int ata_hsm_move(struct ata_port *ap, struct ata_queued_cmd *qc, + u8 status, int in_wq) +{ + unsigned long flags = 0; + int poll_next; + + WARN_ON((qc->flags & ATA_QCFLAG_ACTIVE) == 0); + + /* Make sure ata_qc_issue_prot() does not throw things + * like DMA polling into the workqueue. Notice that + * in_wq is not equivalent to (qc->tf.flags & ATA_TFLAG_POLLING). + */ + WARN_ON(in_wq != ata_hsm_ok_in_wq(ap, qc)); + +fsm_start: + DPRINTK("ata%u: protocol %d task_state %d (dev_stat 0x%X)\n", + ap->id, qc->tf.protocol, ap->hsm_task_state, status); + + switch (ap->hsm_task_state) { + case HSM_ST_FIRST: + /* Send first data block or PACKET CDB */ + + /* If polling, we will stay in the work queue after + * sending the data. Otherwise, interrupt handler + * takes over after sending the data. + */ + poll_next = (qc->tf.flags & ATA_TFLAG_POLLING); + + /* check device status */ + if (unlikely((status & ATA_DRQ) == 0)) { + /* handle BSY=0, DRQ=0 as error */ + if (likely(status & (ATA_ERR | ATA_DF))) + /* device stops HSM for abort/error */ + qc->err_mask |= AC_ERR_DEV; + else + /* HSM violation. Let EH handle this */ + qc->err_mask |= AC_ERR_HSM; + + ap->hsm_task_state = HSM_ST_ERR; + goto fsm_start; + } + + /* Device should not ask for data transfer (DRQ=1) + * when it finds something wrong. + * We ignore DRQ here and stop the HSM by + * changing hsm_task_state to HSM_ST_ERR and + * let the EH abort the command or reset the device. + */ + if (unlikely(status & (ATA_ERR | ATA_DF))) { + printk(KERN_WARNING "ata%d: DRQ=1 with device error, dev_stat 0x%X\n", + ap->id, status); + qc->err_mask |= AC_ERR_HSM; + ap->hsm_task_state = HSM_ST_ERR; + goto fsm_start; + } + + /* Send the CDB (atapi) or the first data block (ata pio out). + * During the state transition, interrupt handler shouldn't + * be invoked before the data transfer is complete and + * hsm_task_state is changed. Hence, the following locking. + */ + if (in_wq) + spin_lock_irqsave(ap->lock, flags); + + if (qc->tf.protocol == ATA_PROT_PIO) { + /* PIO data out protocol. + * send first data block. + */ + + /* ata_pio_sectors() might change the state + * to HSM_ST_LAST. so, the state is changed here + * before ata_pio_sectors(). + */ + ap->hsm_task_state = HSM_ST; + ata_pio_sectors(qc); + ata_altstatus(ap); /* flush */ + } else + /* send CDB */ + atapi_send_cdb(ap, qc); + + if (in_wq) + spin_unlock_irqrestore(ap->lock, flags); + + /* if polling, ata_pio_task() handles the rest. + * otherwise, interrupt handler takes over from here. + */ + break; + + case HSM_ST: + /* complete command or read/write the data register */ + if (qc->tf.protocol == ATA_PROT_ATAPI) { + /* ATAPI PIO protocol */ + if ((status & ATA_DRQ) == 0) { + /* No more data to transfer or device error. + * Device error will be tagged in HSM_ST_LAST. + */ + ap->hsm_task_state = HSM_ST_LAST; + goto fsm_start; + } + + /* Device should not ask for data transfer (DRQ=1) + * when it finds something wrong. + * We ignore DRQ here and stop the HSM by + * changing hsm_task_state to HSM_ST_ERR and + * let the EH abort the command or reset the device. + */ + if (unlikely(status & (ATA_ERR | ATA_DF))) { + printk(KERN_WARNING "ata%d: DRQ=1 with device error, dev_stat 0x%X\n", + ap->id, status); + qc->err_mask |= AC_ERR_HSM; + ap->hsm_task_state = HSM_ST_ERR; + goto fsm_start; + } + + atapi_pio_bytes(qc); + + if (unlikely(ap->hsm_task_state == HSM_ST_ERR)) + /* bad ireason reported by device */ + goto fsm_start; + + } else { + /* ATA PIO protocol */ + if (unlikely((status & ATA_DRQ) == 0)) { + /* handle BSY=0, DRQ=0 as error */ + if (likely(status & (ATA_ERR | ATA_DF))) + /* device stops HSM for abort/error */ + qc->err_mask |= AC_ERR_DEV; + else + /* HSM violation. Let EH handle this */ + qc->err_mask |= AC_ERR_HSM; + + ap->hsm_task_state = HSM_ST_ERR; + goto fsm_start; + } + + /* For PIO reads, some devices may ask for + * data transfer (DRQ=1) alone with ERR=1. + * We respect DRQ here and transfer one + * block of junk data before changing the + * hsm_task_state to HSM_ST_ERR. + * + * For PIO writes, ERR=1 DRQ=1 doesn't make + * sense since the data block has been + * transferred to the device. + */ + if (unlikely(status & (ATA_ERR | ATA_DF))) { + /* data might be corrputed */ + qc->err_mask |= AC_ERR_DEV; + + if (!(qc->tf.flags & ATA_TFLAG_WRITE)) { + ata_pio_sectors(qc); + ata_altstatus(ap); + status = ata_wait_idle(ap); + } + + if (status & (ATA_BUSY | ATA_DRQ)) + qc->err_mask |= AC_ERR_HSM; + + /* ata_pio_sectors() might change the + * state to HSM_ST_LAST. so, the state + * is changed after ata_pio_sectors(). + */ + ap->hsm_task_state = HSM_ST_ERR; + goto fsm_start; + } + + ata_pio_sectors(qc); + + if (ap->hsm_task_state == HSM_ST_LAST && + (!(qc->tf.flags & ATA_TFLAG_WRITE))) { + /* all data read */ + ata_altstatus(ap); + status = ata_wait_idle(ap); + goto fsm_start; + } + } + + ata_altstatus(ap); /* flush */ + poll_next = 1; + break; + + case HSM_ST_LAST: + if (unlikely(!ata_ok(status))) { + qc->err_mask |= __ac_err_mask(status); + ap->hsm_task_state = HSM_ST_ERR; + goto fsm_start; + } + + /* no more data to transfer */ + DPRINTK("ata%u: dev %u command complete, drv_stat 0x%x\n", + ap->id, qc->dev->devno, status); + + WARN_ON(qc->err_mask); + + ap->hsm_task_state = HSM_ST_IDLE; + + /* complete taskfile transaction */ + ata_hsm_qc_complete(qc, in_wq); + + poll_next = 0; + break; + + case HSM_ST_ERR: + /* make sure qc->err_mask is available to + * know what's wrong and recover + */ + WARN_ON(qc->err_mask == 0); + + ap->hsm_task_state = HSM_ST_IDLE; + + /* complete taskfile transaction */ + ata_hsm_qc_complete(qc, in_wq); + + poll_next = 0; + break; + default: + poll_next = 0; + BUG(); + } + + return poll_next; +} + +static void ata_pio_task(void *_data) +{ + struct ata_queued_cmd *qc = _data; + struct ata_port *ap = qc->ap; + u8 status; + int poll_next; + +fsm_start: + WARN_ON(ap->hsm_task_state == HSM_ST_IDLE); + + /* + * This is purely heuristic. This is a fast path. + * Sometimes when we enter, BSY will be cleared in + * a chk-status or two. If not, the drive is probably seeking + * or something. Snooze for a couple msecs, then + * chk-status again. If still busy, queue delayed work. + */ + status = ata_busy_wait(ap, ATA_BUSY, 5); + if (status & ATA_BUSY) { + msleep(2); + status = ata_busy_wait(ap, ATA_BUSY, 10); + if (status & ATA_BUSY) { + ata_port_queue_task(ap, ata_pio_task, qc, ATA_SHORT_PAUSE); + return; + } + } + + /* move the HSM */ + poll_next = ata_hsm_move(ap, qc, status, 1); + + /* another command or interrupt handler + * may be running at this point. + */ + if (poll_next) + goto fsm_start; +} + +/** + * ata_qc_new - Request an available ATA command, for queueing + * @ap: Port associated with device @dev + * @dev: Device from whom we request an available command structure + * + * LOCKING: + * None. + */ + +static struct ata_queued_cmd *ata_qc_new(struct ata_port *ap) +{ + struct ata_queued_cmd *qc = NULL; + unsigned int i; + + /* no command while frozen */ + if (unlikely(ap->pflags & ATA_PFLAG_FROZEN)) + return NULL; + + /* the last tag is reserved for internal command. */ + for (i = 0; i < ATA_MAX_QUEUE - 1; i++) + if (!test_and_set_bit(i, &ap->qc_allocated)) { + qc = __ata_qc_from_tag(ap, i); + break; + } + + if (qc) + qc->tag = i; + + return qc; +} + +/** + * ata_qc_new_init - Request an available ATA command, and initialize it + * @dev: Device from whom we request an available command structure + * + * LOCKING: + * None. + */ + +struct ata_queued_cmd *ata_qc_new_init(struct ata_device *dev) +{ + struct ata_port *ap = dev->ap; + struct ata_queued_cmd *qc; + + qc = ata_qc_new(ap); + if (qc) { + qc->scsicmd = NULL; + qc->ap = ap; + qc->dev = dev; + + ata_qc_reinit(qc); + } + + return qc; +} + +/** + * ata_qc_free - free unused ata_queued_cmd + * @qc: Command to complete + * + * Designed to free unused ata_queued_cmd object + * in case something prevents using it. + * + * LOCKING: + * spin_lock_irqsave(host lock) + */ +void ata_qc_free(struct ata_queued_cmd *qc) +{ + struct ata_port *ap = qc->ap; + unsigned int tag; + + WARN_ON(qc == NULL); /* ata_qc_from_tag _might_ return NULL */ + + qc->flags = 0; + tag = qc->tag; + if (likely(ata_tag_valid(tag))) { + qc->tag = ATA_TAG_POISON; + clear_bit(tag, &ap->qc_allocated); + } +} + +void __ata_qc_complete(struct ata_queued_cmd *qc) +{ + struct ata_port *ap = qc->ap; + + WARN_ON(qc == NULL); /* ata_qc_from_tag _might_ return NULL */ + WARN_ON(!(qc->flags & ATA_QCFLAG_ACTIVE)); + + if (likely(qc->flags & ATA_QCFLAG_DMAMAP)) + ata_sg_clean(qc); + + /* command should be marked inactive atomically with qc completion */ + if (qc->tf.protocol == ATA_PROT_NCQ) + ap->sactive &= ~(1 << qc->tag); + else + ap->active_tag = ATA_TAG_POISON; + + /* atapi: mark qc as inactive to prevent the interrupt handler + * from completing the command twice later, before the error handler + * is called. (when rc != 0 and atapi request sense is needed) + */ + qc->flags &= ~ATA_QCFLAG_ACTIVE; + ap->qc_active &= ~(1 << qc->tag); + + /* call completion callback */ + qc->complete_fn(qc); +} + +/** + * ata_qc_complete - Complete an active ATA command + * @qc: Command to complete + * @err_mask: ATA Status register contents + * + * Indicate to the mid and upper layers that an ATA + * command has completed, with either an ok or not-ok status. + * + * LOCKING: + * spin_lock_irqsave(host lock) + */ +void ata_qc_complete(struct ata_queued_cmd *qc) +{ + struct ata_port *ap = qc->ap; + + /* XXX: New EH and old EH use different mechanisms to + * synchronize EH with regular execution path. + * + * In new EH, a failed qc is marked with ATA_QCFLAG_FAILED. + * Normal execution path is responsible for not accessing a + * failed qc. libata core enforces the rule by returning NULL + * from ata_qc_from_tag() for failed qcs. + * + * Old EH depends on ata_qc_complete() nullifying completion + * requests if ATA_QCFLAG_EH_SCHEDULED is set. Old EH does + * not synchronize with interrupt handler. Only PIO task is + * taken care of. + */ + if (ap->ops->error_handler) { + WARN_ON(ap->pflags & ATA_PFLAG_FROZEN); + + if (unlikely(qc->err_mask)) + qc->flags |= ATA_QCFLAG_FAILED; + + if (unlikely(qc->flags & ATA_QCFLAG_FAILED)) { + if (!ata_tag_internal(qc->tag)) { + /* always fill result TF for failed qc */ + ap->ops->tf_read(ap, &qc->result_tf); + ata_qc_schedule_eh(qc); + return; + } + } + + /* read result TF if requested */ + if (qc->flags & ATA_QCFLAG_RESULT_TF) + ap->ops->tf_read(ap, &qc->result_tf); + + __ata_qc_complete(qc); + } else { + if (qc->flags & ATA_QCFLAG_EH_SCHEDULED) + return; + + /* read result TF if failed or requested */ + if (qc->err_mask || qc->flags & ATA_QCFLAG_RESULT_TF) + ap->ops->tf_read(ap, &qc->result_tf); + + __ata_qc_complete(qc); + } +} + +/** + * ata_qc_complete_multiple - Complete multiple qcs successfully + * @ap: port in question + * @qc_active: new qc_active mask + * @finish_qc: LLDD callback invoked before completing a qc + * + * Complete in-flight commands. This functions is meant to be + * called from low-level driver's interrupt routine to complete + * requests normally. ap->qc_active and @qc_active is compared + * and commands are completed accordingly. + * + * LOCKING: + * spin_lock_irqsave(host lock) + * + * RETURNS: + * Number of completed commands on success, -errno otherwise. + */ +int ata_qc_complete_multiple(struct ata_port *ap, u32 qc_active, + void (*finish_qc)(struct ata_queued_cmd *)) +{ + int nr_done = 0; + u32 done_mask; + int i; + + done_mask = ap->qc_active ^ qc_active; + + if (unlikely(done_mask & qc_active)) { + ata_port_printk(ap, KERN_ERR, "illegal qc_active transition " + "(%08x->%08x)\n", ap->qc_active, qc_active); + return -EINVAL; + } + + for (i = 0; i < ATA_MAX_QUEUE; i++) { + struct ata_queued_cmd *qc; + + if (!(done_mask & (1 << i))) + continue; + + if ((qc = ata_qc_from_tag(ap, i))) { + if (finish_qc) + finish_qc(qc); + ata_qc_complete(qc); + nr_done++; + } + } + + return nr_done; +} + +static inline int ata_should_dma_map(struct ata_queued_cmd *qc) +{ + struct ata_port *ap = qc->ap; + + switch (qc->tf.protocol) { + case ATA_PROT_NCQ: + case ATA_PROT_DMA: + case ATA_PROT_ATAPI_DMA: + return 1; + + case ATA_PROT_ATAPI: + case ATA_PROT_PIO: + if (ap->flags & ATA_FLAG_PIO_DMA) + return 1; + + /* fall through */ + + default: + return 0; + } + + /* never reached */ +} + +/** + * ata_qc_issue - issue taskfile to device + * @qc: command to issue to device + * + * Prepare an ATA command to submission to device. + * This includes mapping the data into a DMA-able + * area, filling in the S/G table, and finally + * writing the taskfile to hardware, starting the command. + * + * LOCKING: + * spin_lock_irqsave(host lock) + */ +void ata_qc_issue(struct ata_queued_cmd *qc) +{ + struct ata_port *ap = qc->ap; + + /* Make sure only one non-NCQ command is outstanding. The + * check is skipped for old EH because it reuses active qc to + * request ATAPI sense. + */ + WARN_ON(ap->ops->error_handler && ata_tag_valid(ap->active_tag)); + + if (qc->tf.protocol == ATA_PROT_NCQ) { + WARN_ON(ap->sactive & (1 << qc->tag)); + ap->sactive |= 1 << qc->tag; + } else { + WARN_ON(ap->sactive); + ap->active_tag = qc->tag; + } + + qc->flags |= ATA_QCFLAG_ACTIVE; + ap->qc_active |= 1 << qc->tag; + + if (ata_should_dma_map(qc)) { + if (qc->flags & ATA_QCFLAG_SG) { + if (ata_sg_setup(qc)) + goto sg_err; + } else if (qc->flags & ATA_QCFLAG_SINGLE) { + if (ata_sg_setup_one(qc)) + goto sg_err; + } + } else { + qc->flags &= ~ATA_QCFLAG_DMAMAP; + } + + ap->ops->qc_prep(qc); + + qc->err_mask |= ap->ops->qc_issue(qc); + if (unlikely(qc->err_mask)) + goto err; + return; + +sg_err: + qc->flags &= ~ATA_QCFLAG_DMAMAP; + qc->err_mask |= AC_ERR_SYSTEM; +err: + ata_qc_complete(qc); +} + +/** + * ata_qc_issue_prot - issue taskfile to device in proto-dependent manner + * @qc: command to issue to device + * + * Using various libata functions and hooks, this function + * starts an ATA command. ATA commands are grouped into + * classes called "protocols", and issuing each type of protocol + * is slightly different. + * + * May be used as the qc_issue() entry in ata_port_operations. + * + * LOCKING: + * spin_lock_irqsave(host lock) + * + * RETURNS: + * Zero on success, AC_ERR_* mask on failure + */ + +unsigned int ata_qc_issue_prot(struct ata_queued_cmd *qc) +{ + struct ata_port *ap = qc->ap; + + /* Use polling pio if the LLD doesn't handle + * interrupt driven pio and atapi CDB interrupt. + */ + if (ap->flags & ATA_FLAG_PIO_POLLING) { + switch (qc->tf.protocol) { + case ATA_PROT_PIO: + case ATA_PROT_ATAPI: + case ATA_PROT_ATAPI_NODATA: + qc->tf.flags |= ATA_TFLAG_POLLING; + break; + case ATA_PROT_ATAPI_DMA: + if (qc->dev->flags & ATA_DFLAG_CDB_INTR) + /* see ata_dma_blacklisted() */ + BUG(); + break; + default: + break; + } + } + + /* select the device */ + ata_dev_select(ap, qc->dev->devno, 1, 0); + + /* start the command */ + switch (qc->tf.protocol) { + case ATA_PROT_NODATA: + if (qc->tf.flags & ATA_TFLAG_POLLING) + ata_qc_set_polling(qc); + + ata_tf_to_host(ap, &qc->tf); + ap->hsm_task_state = HSM_ST_LAST; + + if (qc->tf.flags & ATA_TFLAG_POLLING) + ata_port_queue_task(ap, ata_pio_task, qc, 0); + + break; + + case ATA_PROT_DMA: + WARN_ON(qc->tf.flags & ATA_TFLAG_POLLING); + + ap->ops->tf_load(ap, &qc->tf); /* load tf registers */ + ap->ops->bmdma_setup(qc); /* set up bmdma */ + ap->ops->bmdma_start(qc); /* initiate bmdma */ + ap->hsm_task_state = HSM_ST_LAST; + break; + + case ATA_PROT_PIO: + if (qc->tf.flags & ATA_TFLAG_POLLING) + ata_qc_set_polling(qc); + + ata_tf_to_host(ap, &qc->tf); + + if (qc->tf.flags & ATA_TFLAG_WRITE) { + /* PIO data out protocol */ + ap->hsm_task_state = HSM_ST_FIRST; + ata_port_queue_task(ap, ata_pio_task, qc, 0); + + /* always send first data block using + * the ata_pio_task() codepath. + */ + } else { + /* PIO data in protocol */ + ap->hsm_task_state = HSM_ST; + + if (qc->tf.flags & ATA_TFLAG_POLLING) + ata_port_queue_task(ap, ata_pio_task, qc, 0); + + /* if polling, ata_pio_task() handles the rest. + * otherwise, interrupt handler takes over from here. + */ + } + + break; + + case ATA_PROT_ATAPI: + case ATA_PROT_ATAPI_NODATA: + if (qc->tf.flags & ATA_TFLAG_POLLING) + ata_qc_set_polling(qc); + + ata_tf_to_host(ap, &qc->tf); + + ap->hsm_task_state = HSM_ST_FIRST; + + /* send cdb by polling if no cdb interrupt */ + if ((!(qc->dev->flags & ATA_DFLAG_CDB_INTR)) || + (qc->tf.flags & ATA_TFLAG_POLLING)) + ata_port_queue_task(ap, ata_pio_task, qc, 0); + break; + + case ATA_PROT_ATAPI_DMA: + WARN_ON(qc->tf.flags & ATA_TFLAG_POLLING); + + ap->ops->tf_load(ap, &qc->tf); /* load tf registers */ + ap->ops->bmdma_setup(qc); /* set up bmdma */ + ap->hsm_task_state = HSM_ST_FIRST; + + /* send cdb by polling if no cdb interrupt */ + if (!(qc->dev->flags & ATA_DFLAG_CDB_INTR)) + ata_port_queue_task(ap, ata_pio_task, qc, 0); + break; + + default: + WARN_ON(1); + return AC_ERR_SYSTEM; + } + + return 0; +} + +/** + * ata_host_intr - Handle host interrupt for given (port, task) + * @ap: Port on which interrupt arrived (possibly...) + * @qc: Taskfile currently active in engine + * + * Handle host interrupt for given queued command. Currently, + * only DMA interrupts are handled. All other commands are + * handled via polling with interrupts disabled (nIEN bit). + * + * LOCKING: + * spin_lock_irqsave(host lock) + * + * RETURNS: + * One if interrupt was handled, zero if not (shared irq). + */ + +inline unsigned int ata_host_intr (struct ata_port *ap, + struct ata_queued_cmd *qc) +{ + u8 status, host_stat = 0; + + VPRINTK("ata%u: protocol %d task_state %d\n", + ap->id, qc->tf.protocol, ap->hsm_task_state); + + /* Check whether we are expecting interrupt in this state */ + switch (ap->hsm_task_state) { + case HSM_ST_FIRST: + /* Some pre-ATAPI-4 devices assert INTRQ + * at this state when ready to receive CDB. + */ + + /* Check the ATA_DFLAG_CDB_INTR flag is enough here. + * The flag was turned on only for atapi devices. + * No need to check is_atapi_taskfile(&qc->tf) again. + */ + if (!(qc->dev->flags & ATA_DFLAG_CDB_INTR)) + goto idle_irq; + break; + case HSM_ST_LAST: + if (qc->tf.protocol == ATA_PROT_DMA || + qc->tf.protocol == ATA_PROT_ATAPI_DMA) { + /* check status of DMA engine */ + host_stat = ap->ops->bmdma_status(ap); + VPRINTK("ata%u: host_stat 0x%X\n", ap->id, host_stat); + + /* if it's not our irq... */ + if (!(host_stat & ATA_DMA_INTR)) + goto idle_irq; + + /* before we do anything else, clear DMA-Start bit */ + ap->ops->bmdma_stop(qc); + + if (unlikely(host_stat & ATA_DMA_ERR)) { + /* error when transfering data to/from memory */ + qc->err_mask |= AC_ERR_HOST_BUS; + ap->hsm_task_state = HSM_ST_ERR; + } + } + break; + case HSM_ST: + break; + default: + goto idle_irq; + } + + /* check altstatus */ + status = ata_altstatus(ap); + if (status & ATA_BUSY) + goto idle_irq; + + /* check main status, clearing INTRQ */ + status = ata_chk_status(ap); + if (unlikely(status & ATA_BUSY)) + goto idle_irq; + + /* ack bmdma irq events */ + ap->ops->irq_clear(ap); + + ata_hsm_move(ap, qc, status, 0); + return 1; /* irq handled */ + +idle_irq: + ap->stats.idle_irq++; + +#ifdef ATA_IRQ_TRAP + if ((ap->stats.idle_irq % 1000) == 0) { + ata_irq_ack(ap, 0); /* debug trap */ + ata_port_printk(ap, KERN_WARNING, "irq trap\n"); + return 1; + } +#endif + return 0; /* irq not handled */ +} + +/** + * ata_interrupt - Default ATA host interrupt handler + * @irq: irq line (unused) + * @dev_instance: pointer to our ata_host information structure + * @regs: unused + * + * Default interrupt handler for PCI IDE devices. Calls + * ata_host_intr() for each port that is not disabled. + * + * LOCKING: + * Obtains host lock during operation. + * + * RETURNS: + * IRQ_NONE or IRQ_HANDLED. + */ + +irqreturn_t ata_interrupt (int irq, void *dev_instance, struct pt_regs *regs) +{ + struct ata_host *host = dev_instance; + unsigned int i; + unsigned int handled = 0; + unsigned long flags; + + /* TODO: make _irqsave conditional on x86 PCI IDE legacy mode */ + spin_lock_irqsave(&host->lock, flags); + + for (i = 0; i < host->n_ports; i++) { + struct ata_port *ap; + + ap = host->ports[i]; + if (ap && + !(ap->flags & ATA_FLAG_DISABLED)) { + struct ata_queued_cmd *qc; + + qc = ata_qc_from_tag(ap, ap->active_tag); + if (qc && (!(qc->tf.flags & ATA_TFLAG_POLLING)) && + (qc->flags & ATA_QCFLAG_ACTIVE)) + handled |= ata_host_intr(ap, qc); + } + } + + spin_unlock_irqrestore(&host->lock, flags); + + return IRQ_RETVAL(handled); +} + +/** + * sata_scr_valid - test whether SCRs are accessible + * @ap: ATA port to test SCR accessibility for + * + * Test whether SCRs are accessible for @ap. + * + * LOCKING: + * None. + * + * RETURNS: + * 1 if SCRs are accessible, 0 otherwise. + */ +int sata_scr_valid(struct ata_port *ap) +{ + return ap->cbl == ATA_CBL_SATA && ap->ops->scr_read; +} + +/** + * sata_scr_read - read SCR register of the specified port + * @ap: ATA port to read SCR for + * @reg: SCR to read + * @val: Place to store read value + * + * Read SCR register @reg of @ap into *@val. This function is + * guaranteed to succeed if the cable type of the port is SATA + * and the port implements ->scr_read. + * + * LOCKING: + * None. + * + * RETURNS: + * 0 on success, negative errno on failure. + */ +int sata_scr_read(struct ata_port *ap, int reg, u32 *val) +{ + if (sata_scr_valid(ap)) { + *val = ap->ops->scr_read(ap, reg); + return 0; + } + return -EOPNOTSUPP; +} + +/** + * sata_scr_write - write SCR register of the specified port + * @ap: ATA port to write SCR for + * @reg: SCR to write + * @val: value to write + * + * Write @val to SCR register @reg of @ap. This function is + * guaranteed to succeed if the cable type of the port is SATA + * and the port implements ->scr_read. + * + * LOCKING: + * None. + * + * RETURNS: + * 0 on success, negative errno on failure. + */ +int sata_scr_write(struct ata_port *ap, int reg, u32 val) +{ + if (sata_scr_valid(ap)) { + ap->ops->scr_write(ap, reg, val); + return 0; + } + return -EOPNOTSUPP; +} + +/** + * sata_scr_write_flush - write SCR register of the specified port and flush + * @ap: ATA port to write SCR for + * @reg: SCR to write + * @val: value to write + * + * This function is identical to sata_scr_write() except that this + * function performs flush after writing to the register. + * + * LOCKING: + * None. + * + * RETURNS: + * 0 on success, negative errno on failure. + */ +int sata_scr_write_flush(struct ata_port *ap, int reg, u32 val) +{ + if (sata_scr_valid(ap)) { + ap->ops->scr_write(ap, reg, val); + ap->ops->scr_read(ap, reg); + return 0; + } + return -EOPNOTSUPP; +} + +/** + * ata_port_online - test whether the given port is online + * @ap: ATA port to test + * + * Test whether @ap is online. Note that this function returns 0 + * if online status of @ap cannot be obtained, so + * ata_port_online(ap) != !ata_port_offline(ap). + * + * LOCKING: + * None. + * + * RETURNS: + * 1 if the port online status is available and online. + */ +int ata_port_online(struct ata_port *ap) +{ + u32 sstatus; + + if (!sata_scr_read(ap, SCR_STATUS, &sstatus) && (sstatus & 0xf) == 0x3) + return 1; + return 0; +} + +/** + * ata_port_offline - test whether the given port is offline + * @ap: ATA port to test + * + * Test whether @ap is offline. Note that this function returns + * 0 if offline status of @ap cannot be obtained, so + * ata_port_online(ap) != !ata_port_offline(ap). + * + * LOCKING: + * None. + * + * RETURNS: + * 1 if the port offline status is available and offline. + */ +int ata_port_offline(struct ata_port *ap) +{ + u32 sstatus; + + if (!sata_scr_read(ap, SCR_STATUS, &sstatus) && (sstatus & 0xf) != 0x3) + return 1; + return 0; +} + +int ata_flush_cache(struct ata_device *dev) +{ + unsigned int err_mask; + u8 cmd; + + if (!ata_try_flush_cache(dev)) + return 0; + + if (ata_id_has_flush_ext(dev->id)) + cmd = ATA_CMD_FLUSH_EXT; + else + cmd = ATA_CMD_FLUSH; + + err_mask = ata_do_simple_cmd(dev, cmd); + if (err_mask) { + ata_dev_printk(dev, KERN_ERR, "failed to flush cache\n"); + return -EIO; + } + + return 0; +} + +static int ata_host_request_pm(struct ata_host *host, pm_message_t mesg, + unsigned int action, unsigned int ehi_flags, + int wait) +{ + unsigned long flags; + int i, rc; + + for (i = 0; i < host->n_ports; i++) { + struct ata_port *ap = host->ports[i]; + + /* Previous resume operation might still be in + * progress. Wait for PM_PENDING to clear. + */ + if (ap->pflags & ATA_PFLAG_PM_PENDING) { + ata_port_wait_eh(ap); + WARN_ON(ap->pflags & ATA_PFLAG_PM_PENDING); + } + + /* request PM ops to EH */ + spin_lock_irqsave(ap->lock, flags); + + ap->pm_mesg = mesg; + if (wait) { + rc = 0; + ap->pm_result = &rc; + } + + ap->pflags |= ATA_PFLAG_PM_PENDING; + ap->eh_info.action |= action; + ap->eh_info.flags |= ehi_flags; + + ata_port_schedule_eh(ap); + + spin_unlock_irqrestore(ap->lock, flags); + + /* wait and check result */ + if (wait) { + ata_port_wait_eh(ap); + WARN_ON(ap->pflags & ATA_PFLAG_PM_PENDING); + if (rc) + return rc; + } + } + + return 0; +} + +/** + * ata_host_suspend - suspend host + * @host: host to suspend + * @mesg: PM message + * + * Suspend @host. Actual operation is performed by EH. This + * function requests EH to perform PM operations and waits for EH + * to finish. + * + * LOCKING: + * Kernel thread context (may sleep). + * + * RETURNS: + * 0 on success, -errno on failure. + */ +int ata_host_suspend(struct ata_host *host, pm_message_t mesg) +{ + int i, j, rc; + + rc = ata_host_request_pm(host, mesg, 0, ATA_EHI_QUIET, 1); + if (rc) + goto fail; + + /* EH is quiescent now. Fail if we have any ready device. + * This happens if hotplug occurs between completion of device + * suspension and here. + */ + for (i = 0; i < host->n_ports; i++) { + struct ata_port *ap = host->ports[i]; + + for (j = 0; j < ATA_MAX_DEVICES; j++) { + struct ata_device *dev = &ap->device[j]; + + if (ata_dev_ready(dev)) { + ata_port_printk(ap, KERN_WARNING, + "suspend failed, device %d " + "still active\n", dev->devno); + rc = -EBUSY; + goto fail; + } + } + } + + host->dev->power.power_state = mesg; + return 0; + + fail: + ata_host_resume(host); + return rc; +} + +/** + * ata_host_resume - resume host + * @host: host to resume + * + * Resume @host. Actual operation is performed by EH. This + * function requests EH to perform PM operations and returns. + * Note that all resume operations are performed parallely. + * + * LOCKING: + * Kernel thread context (may sleep). + */ +void ata_host_resume(struct ata_host *host) +{ + ata_host_request_pm(host, PMSG_ON, ATA_EH_SOFTRESET, + ATA_EHI_NO_AUTOPSY | ATA_EHI_QUIET, 0); + host->dev->power.power_state = PMSG_ON; +} + +/** + * ata_port_start - Set port up for dma. + * @ap: Port to initialize + * + * Called just after data structures for each port are + * initialized. Allocates space for PRD table. + * + * May be used as the port_start() entry in ata_port_operations. + * + * LOCKING: + * Inherited from caller. + */ + +int ata_port_start (struct ata_port *ap) +{ + struct device *dev = ap->dev; + int rc; + + ap->prd = dma_alloc_coherent(dev, ATA_PRD_TBL_SZ, &ap->prd_dma, GFP_KERNEL); + if (!ap->prd) + return -ENOMEM; + + rc = ata_pad_alloc(ap, dev); + if (rc) { + dma_free_coherent(dev, ATA_PRD_TBL_SZ, ap->prd, ap->prd_dma); + return rc; + } + + DPRINTK("prd alloc, virt %p, dma %llx\n", ap->prd, (unsigned long long) ap->prd_dma); + + return 0; +} + + +/** + * ata_port_stop - Undo ata_port_start() + * @ap: Port to shut down + * + * Frees the PRD table. + * + * May be used as the port_stop() entry in ata_port_operations. + * + * LOCKING: + * Inherited from caller. + */ + +void ata_port_stop (struct ata_port *ap) +{ + struct device *dev = ap->dev; + + dma_free_coherent(dev, ATA_PRD_TBL_SZ, ap->prd, ap->prd_dma); + ata_pad_free(ap, dev); +} + +void ata_host_stop (struct ata_host *host) +{ + if (host->mmio_base) + iounmap(host->mmio_base); +} + +/** + * ata_dev_init - Initialize an ata_device structure + * @dev: Device structure to initialize + * + * Initialize @dev in preparation for probing. + * + * LOCKING: + * Inherited from caller. + */ +void ata_dev_init(struct ata_device *dev) +{ + struct ata_port *ap = dev->ap; + unsigned long flags; + + /* SATA spd limit is bound to the first device */ + ap->sata_spd_limit = ap->hw_sata_spd_limit; + + /* High bits of dev->flags are used to record warm plug + * requests which occur asynchronously. Synchronize using + * host lock. + */ + spin_lock_irqsave(ap->lock, flags); + dev->flags &= ~ATA_DFLAG_INIT_MASK; + spin_unlock_irqrestore(ap->lock, flags); + + memset((void *)dev + ATA_DEVICE_CLEAR_OFFSET, 0, + sizeof(*dev) - ATA_DEVICE_CLEAR_OFFSET); + dev->pio_mask = UINT_MAX; + dev->mwdma_mask = UINT_MAX; + dev->udma_mask = UINT_MAX; +} + +/** + * ata_port_init - Initialize an ata_port structure + * @ap: Structure to initialize + * @host: Collection of hosts to which @ap belongs + * @ent: Probe information provided by low-level driver + * @port_no: Port number associated with this ata_port + * + * Initialize a new ata_port structure. + * + * LOCKING: + * Inherited from caller. + */ +void ata_port_init(struct ata_port *ap, struct ata_host *host, + const struct ata_probe_ent *ent, unsigned int port_no) +{ + unsigned int i; + + ap->lock = &host->lock; + ap->flags = ATA_FLAG_DISABLED; + ap->id = ata_unique_id++; + ap->ctl = ATA_DEVCTL_OBS; + ap->host = host; + ap->dev = ent->dev; + ap->port_no = port_no; + if (port_no == 1 && ent->pinfo2) { + ap->pio_mask = ent->pinfo2->pio_mask; + ap->mwdma_mask = ent->pinfo2->mwdma_mask; + ap->udma_mask = ent->pinfo2->udma_mask; + ap->flags |= ent->pinfo2->flags; + ap->ops = ent->pinfo2->port_ops; + } else { + ap->pio_mask = ent->pio_mask; + ap->mwdma_mask = ent->mwdma_mask; + ap->udma_mask = ent->udma_mask; + ap->flags |= ent->port_flags; + ap->ops = ent->port_ops; + } + ap->hw_sata_spd_limit = UINT_MAX; + ap->active_tag = ATA_TAG_POISON; + ap->last_ctl = 0xFF; + +#if defined(ATA_VERBOSE_DEBUG) + /* turn on all debugging levels */ + ap->msg_enable = 0x00FF; +#elif defined(ATA_DEBUG) + ap->msg_enable = ATA_MSG_DRV | ATA_MSG_INFO | ATA_MSG_CTL | ATA_MSG_WARN | ATA_MSG_ERR; +#else + ap->msg_enable = ATA_MSG_DRV | ATA_MSG_ERR | ATA_MSG_WARN; +#endif + + INIT_WORK(&ap->port_task, NULL, NULL); + INIT_WORK(&ap->hotplug_task, ata_scsi_hotplug, ap); + INIT_WORK(&ap->scsi_rescan_task, ata_scsi_dev_rescan, ap); + INIT_LIST_HEAD(&ap->eh_done_q); + init_waitqueue_head(&ap->eh_wait_q); + + /* set cable type */ + ap->cbl = ATA_CBL_NONE; + if (ap->flags & ATA_FLAG_SATA) + ap->cbl = ATA_CBL_SATA; + + for (i = 0; i < ATA_MAX_DEVICES; i++) { + struct ata_device *dev = &ap->device[i]; + dev->ap = ap; + dev->devno = i; + ata_dev_init(dev); + } + +#ifdef ATA_IRQ_TRAP + ap->stats.unhandled_irq = 1; + ap->stats.idle_irq = 1; +#endif + + memcpy(&ap->ioaddr, &ent->port[port_no], sizeof(struct ata_ioports)); +} + +/** + * ata_port_init_shost - Initialize SCSI host associated with ATA port + * @ap: ATA port to initialize SCSI host for + * @shost: SCSI host associated with @ap + * + * Initialize SCSI host @shost associated with ATA port @ap. + * + * LOCKING: + * Inherited from caller. + */ +static void ata_port_init_shost(struct ata_port *ap, struct Scsi_Host *shost) +{ + ap->scsi_host = shost; + + shost->unique_id = ap->id; + shost->max_id = 16; + shost->max_lun = 1; + shost->max_channel = 1; + shost->max_cmd_len = 12; +} + +/** + * ata_port_add - Attach low-level ATA driver to system + * @ent: Information provided by low-level driver + * @host: Collections of ports to which we add + * @port_no: Port number associated with this host + * + * Attach low-level ATA driver to system. + * + * LOCKING: + * PCI/etc. bus probe sem. + * + * RETURNS: + * New ata_port on success, for NULL on error. + */ +static struct ata_port * ata_port_add(const struct ata_probe_ent *ent, + struct ata_host *host, + unsigned int port_no) +{ + struct Scsi_Host *shost; + struct ata_port *ap; + + DPRINTK("ENTER\n"); + + if (!ent->port_ops->error_handler && + !(ent->port_flags & (ATA_FLAG_SATA_RESET | ATA_FLAG_SRST))) { + printk(KERN_ERR "ata%u: no reset mechanism available\n", + port_no); + return NULL; + } + + shost = scsi_host_alloc(ent->sht, sizeof(struct ata_port)); + if (!shost) + return NULL; + + shost->transportt = &ata_scsi_transport_template; + + ap = ata_shost_to_port(shost); + + ata_port_init(ap, host, ent, port_no); + ata_port_init_shost(ap, shost); + + return ap; +} + +/** + * ata_sas_host_init - Initialize a host struct + * @host: host to initialize + * @dev: device host is attached to + * @flags: host flags + * @ops: port_ops + * + * LOCKING: + * PCI/etc. bus probe sem. + * + */ + +void ata_host_init(struct ata_host *host, struct device *dev, + unsigned long flags, const struct ata_port_operations *ops) +{ + spin_lock_init(&host->lock); + host->dev = dev; + host->flags = flags; + host->ops = ops; +} + +/** + * ata_device_add - Register hardware device with ATA and SCSI layers + * @ent: Probe information describing hardware device to be registered + * + * This function processes the information provided in the probe + * information struct @ent, allocates the necessary ATA and SCSI + * host information structures, initializes them, and registers + * everything with requisite kernel subsystems. + * + * This function requests irqs, probes the ATA bus, and probes + * the SCSI bus. + * + * LOCKING: + * PCI/etc. bus probe sem. + * + * RETURNS: + * Number of ports registered. Zero on error (no ports registered). + */ +int ata_device_add(const struct ata_probe_ent *ent) +{ + unsigned int i; + struct device *dev = ent->dev; + struct ata_host *host; + int rc; + + DPRINTK("ENTER\n"); + /* alloc a container for our list of ATA ports (buses) */ + host = kzalloc(sizeof(struct ata_host) + + (ent->n_ports * sizeof(void *)), GFP_KERNEL); + if (!host) + return 0; + + ata_host_init(host, dev, ent->_host_flags, ent->port_ops); + host->n_ports = ent->n_ports; + host->irq = ent->irq; + host->irq2 = ent->irq2; + host->mmio_base = ent->mmio_base; + host->private_data = ent->private_data; + + /* register each port bound to this device */ + for (i = 0; i < host->n_ports; i++) { + struct ata_port *ap; + unsigned long xfer_mode_mask; + int irq_line = ent->irq; + + ap = ata_port_add(ent, host, i); + if (!ap) + goto err_out; + + host->ports[i] = ap; + + /* dummy? */ + if (ent->dummy_port_mask & (1 << i)) { + ata_port_printk(ap, KERN_INFO, "DUMMY\n"); + ap->ops = &ata_dummy_port_ops; + continue; + } + + /* start port */ + rc = ap->ops->port_start(ap); + if (rc) { + host->ports[i] = NULL; + scsi_host_put(ap->scsi_host); + goto err_out; + } + + /* Report the secondary IRQ for second channel legacy */ + if (i == 1 && ent->irq2) + irq_line = ent->irq2; + + xfer_mode_mask =(ap->udma_mask << ATA_SHIFT_UDMA) | + (ap->mwdma_mask << ATA_SHIFT_MWDMA) | + (ap->pio_mask << ATA_SHIFT_PIO); + + /* print per-port info to dmesg */ + ata_port_printk(ap, KERN_INFO, "%cATA max %s cmd 0x%lX " + "ctl 0x%lX bmdma 0x%lX irq %d\n", + ap->flags & ATA_FLAG_SATA ? 'S' : 'P', + ata_mode_string(xfer_mode_mask), + ap->ioaddr.cmd_addr, + ap->ioaddr.ctl_addr, + ap->ioaddr.bmdma_addr, + irq_line); + + ata_chk_status(ap); + host->ops->irq_clear(ap); + ata_eh_freeze_port(ap); /* freeze port before requesting IRQ */ + } + + /* obtain irq, that may be shared between channels */ + rc = request_irq(ent->irq, ent->port_ops->irq_handler, ent->irq_flags, + DRV_NAME, host); + if (rc) { + dev_printk(KERN_ERR, dev, "irq %lu request failed: %d\n", + ent->irq, rc); + goto err_out; + } + + /* do we have a second IRQ for the other channel, eg legacy mode */ + if (ent->irq2) { + /* We will get weird core code crashes later if this is true + so trap it now */ + BUG_ON(ent->irq == ent->irq2); + + rc = request_irq(ent->irq2, ent->port_ops->irq_handler, ent->irq_flags, + DRV_NAME, host); + if (rc) { + dev_printk(KERN_ERR, dev, "irq %lu request failed: %d\n", + ent->irq2, rc); + goto err_out_free_irq; + } + } + + /* perform each probe synchronously */ + DPRINTK("probe begin\n"); + for (i = 0; i < host->n_ports; i++) { + struct ata_port *ap = host->ports[i]; + u32 scontrol; + int rc; + + /* init sata_spd_limit to the current value */ + if (sata_scr_read(ap, SCR_CONTROL, &scontrol) == 0) { + int spd = (scontrol >> 4) & 0xf; + ap->hw_sata_spd_limit &= (1 << spd) - 1; + } + ap->sata_spd_limit = ap->hw_sata_spd_limit; + + rc = scsi_add_host(ap->scsi_host, dev); + if (rc) { + ata_port_printk(ap, KERN_ERR, "scsi_add_host failed\n"); + /* FIXME: do something useful here */ + /* FIXME: handle unconditional calls to + * scsi_scan_host and ata_host_remove, below, + * at the very least + */ + } + + if (ap->ops->error_handler) { + struct ata_eh_info *ehi = &ap->eh_info; + unsigned long flags; + + ata_port_probe(ap); + + /* kick EH for boot probing */ + spin_lock_irqsave(ap->lock, flags); + + ehi->probe_mask = (1 << ATA_MAX_DEVICES) - 1; + ehi->action |= ATA_EH_SOFTRESET; + ehi->flags |= ATA_EHI_NO_AUTOPSY | ATA_EHI_QUIET; + + ap->pflags |= ATA_PFLAG_LOADING; + ata_port_schedule_eh(ap); + + spin_unlock_irqrestore(ap->lock, flags); + + /* wait for EH to finish */ + ata_port_wait_eh(ap); + } else { + DPRINTK("ata%u: bus probe begin\n", ap->id); + rc = ata_bus_probe(ap); + DPRINTK("ata%u: bus probe end\n", ap->id); + + if (rc) { + /* FIXME: do something useful here? + * Current libata behavior will + * tear down everything when + * the module is removed + * or the h/w is unplugged. + */ + } + } + } + + /* probes are done, now scan each port's disk(s) */ + DPRINTK("host probe begin\n"); + for (i = 0; i < host->n_ports; i++) { + struct ata_port *ap = host->ports[i]; + + ata_scsi_scan_host(ap); + } + + dev_set_drvdata(dev, host); + + VPRINTK("EXIT, returning %u\n", ent->n_ports); + return ent->n_ports; /* success */ + +err_out_free_irq: + free_irq(ent->irq, host); +err_out: + for (i = 0; i < host->n_ports; i++) { + struct ata_port *ap = host->ports[i]; + if (ap) { + ap->ops->port_stop(ap); + scsi_host_put(ap->scsi_host); + } + } + + kfree(host); + VPRINTK("EXIT, returning 0\n"); + return 0; +} + +/** + * ata_port_detach - Detach ATA port in prepration of device removal + * @ap: ATA port to be detached + * + * Detach all ATA devices and the associated SCSI devices of @ap; + * then, remove the associated SCSI host. @ap is guaranteed to + * be quiescent on return from this function. + * + * LOCKING: + * Kernel thread context (may sleep). + */ +void ata_port_detach(struct ata_port *ap) +{ + unsigned long flags; + int i; + + if (!ap->ops->error_handler) + goto skip_eh; + + /* tell EH we're leaving & flush EH */ + spin_lock_irqsave(ap->lock, flags); + ap->pflags |= ATA_PFLAG_UNLOADING; + spin_unlock_irqrestore(ap->lock, flags); + + ata_port_wait_eh(ap); + + /* EH is now guaranteed to see UNLOADING, so no new device + * will be attached. Disable all existing devices. + */ + spin_lock_irqsave(ap->lock, flags); + + for (i = 0; i < ATA_MAX_DEVICES; i++) + ata_dev_disable(&ap->device[i]); + + spin_unlock_irqrestore(ap->lock, flags); + + /* Final freeze & EH. All in-flight commands are aborted. EH + * will be skipped and retrials will be terminated with bad + * target. + */ + spin_lock_irqsave(ap->lock, flags); + ata_port_freeze(ap); /* won't be thawed */ + spin_unlock_irqrestore(ap->lock, flags); + + ata_port_wait_eh(ap); + + /* Flush hotplug task. The sequence is similar to + * ata_port_flush_task(). + */ + flush_workqueue(ata_aux_wq); + cancel_delayed_work(&ap->hotplug_task); + flush_workqueue(ata_aux_wq); + + skip_eh: + /* remove the associated SCSI host */ + scsi_remove_host(ap->scsi_host); +} + +/** + * ata_host_remove - PCI layer callback for device removal + * @host: ATA host set that was removed + * + * Unregister all objects associated with this host set. Free those + * objects. + * + * LOCKING: + * Inherited from calling layer (may sleep). + */ + +void ata_host_remove(struct ata_host *host) +{ + unsigned int i; + + for (i = 0; i < host->n_ports; i++) + ata_port_detach(host->ports[i]); + + free_irq(host->irq, host); + if (host->irq2) + free_irq(host->irq2, host); + + for (i = 0; i < host->n_ports; i++) { + struct ata_port *ap = host->ports[i]; + + ata_scsi_release(ap->scsi_host); + + if ((ap->flags & ATA_FLAG_NO_LEGACY) == 0) { + struct ata_ioports *ioaddr = &ap->ioaddr; + + /* FIXME: Add -ac IDE pci mods to remove these special cases */ + if (ioaddr->cmd_addr == ATA_PRIMARY_CMD) + release_region(ATA_PRIMARY_CMD, 8); + else if (ioaddr->cmd_addr == ATA_SECONDARY_CMD) + release_region(ATA_SECONDARY_CMD, 8); + } + + scsi_host_put(ap->scsi_host); + } + + if (host->ops->host_stop) + host->ops->host_stop(host); + + kfree(host); +} + +/** + * ata_scsi_release - SCSI layer callback hook for host unload + * @host: libata host to be unloaded + * + * Performs all duties necessary to shut down a libata port... + * Kill port kthread, disable port, and release resources. + * + * LOCKING: + * Inherited from SCSI layer. + * + * RETURNS: + * One. + */ + +int ata_scsi_release(struct Scsi_Host *shost) +{ + struct ata_port *ap = ata_shost_to_port(shost); + + DPRINTK("ENTER\n"); + + ap->ops->port_disable(ap); + ap->ops->port_stop(ap); + + DPRINTK("EXIT\n"); + return 1; +} + +struct ata_probe_ent * +ata_probe_ent_alloc(struct device *dev, const struct ata_port_info *port) +{ + struct ata_probe_ent *probe_ent; + + probe_ent = kzalloc(sizeof(*probe_ent), GFP_KERNEL); + if (!probe_ent) { + printk(KERN_ERR DRV_NAME "(%s): out of memory\n", + kobject_name(&(dev->kobj))); + return NULL; + } + + INIT_LIST_HEAD(&probe_ent->node); + probe_ent->dev = dev; + + probe_ent->sht = port->sht; + probe_ent->port_flags = port->flags; + probe_ent->pio_mask = port->pio_mask; + probe_ent->mwdma_mask = port->mwdma_mask; + probe_ent->udma_mask = port->udma_mask; + probe_ent->port_ops = port->port_ops; + + return probe_ent; +} + +/** + * ata_std_ports - initialize ioaddr with standard port offsets. + * @ioaddr: IO address structure to be initialized + * + * Utility function which initializes data_addr, error_addr, + * feature_addr, nsect_addr, lbal_addr, lbam_addr, lbah_addr, + * device_addr, status_addr, and command_addr to standard offsets + * relative to cmd_addr. + * + * Does not set ctl_addr, altstatus_addr, bmdma_addr, or scr_addr. + */ + +void ata_std_ports(struct ata_ioports *ioaddr) +{ + ioaddr->data_addr = ioaddr->cmd_addr + ATA_REG_DATA; + ioaddr->error_addr = ioaddr->cmd_addr + ATA_REG_ERR; + ioaddr->feature_addr = ioaddr->cmd_addr + ATA_REG_FEATURE; + ioaddr->nsect_addr = ioaddr->cmd_addr + ATA_REG_NSECT; + ioaddr->lbal_addr = ioaddr->cmd_addr + ATA_REG_LBAL; + ioaddr->lbam_addr = ioaddr->cmd_addr + ATA_REG_LBAM; + ioaddr->lbah_addr = ioaddr->cmd_addr + ATA_REG_LBAH; + ioaddr->device_addr = ioaddr->cmd_addr + ATA_REG_DEVICE; + ioaddr->status_addr = ioaddr->cmd_addr + ATA_REG_STATUS; + ioaddr->command_addr = ioaddr->cmd_addr + ATA_REG_CMD; +} + + +#ifdef CONFIG_PCI + +void ata_pci_host_stop (struct ata_host *host) +{ + struct pci_dev *pdev = to_pci_dev(host->dev); + + pci_iounmap(pdev, host->mmio_base); +} + +/** + * ata_pci_remove_one - PCI layer callback for device removal + * @pdev: PCI device that was removed + * + * PCI layer indicates to libata via this hook that + * hot-unplug or module unload event has occurred. + * Handle this by unregistering all objects associated + * with this PCI device. Free those objects. Then finally + * release PCI resources and disable device. + * + * LOCKING: + * Inherited from PCI layer (may sleep). + */ + +void ata_pci_remove_one (struct pci_dev *pdev) +{ + struct device *dev = pci_dev_to_dev(pdev); + struct ata_host *host = dev_get_drvdata(dev); + + ata_host_remove(host); + + pci_release_regions(pdev); + pci_disable_device(pdev); + dev_set_drvdata(dev, NULL); +} + +/* move to PCI subsystem */ +int pci_test_config_bits(struct pci_dev *pdev, const struct pci_bits *bits) +{ + unsigned long tmp = 0; + + switch (bits->width) { + case 1: { + u8 tmp8 = 0; + pci_read_config_byte(pdev, bits->reg, &tmp8); + tmp = tmp8; + break; + } + case 2: { + u16 tmp16 = 0; + pci_read_config_word(pdev, bits->reg, &tmp16); + tmp = tmp16; + break; + } + case 4: { + u32 tmp32 = 0; + pci_read_config_dword(pdev, bits->reg, &tmp32); + tmp = tmp32; + break; + } + + default: + return -EINVAL; + } + + tmp &= bits->mask; + + return (tmp == bits->val) ? 1 : 0; +} + +void ata_pci_device_do_suspend(struct pci_dev *pdev, pm_message_t mesg) +{ + pci_save_state(pdev); + + if (mesg.event == PM_EVENT_SUSPEND) { + pci_disable_device(pdev); + pci_set_power_state(pdev, PCI_D3hot); + } +} + +void ata_pci_device_do_resume(struct pci_dev *pdev) +{ + pci_set_power_state(pdev, PCI_D0); + pci_restore_state(pdev); + pci_enable_device(pdev); + pci_set_master(pdev); +} + +int ata_pci_device_suspend(struct pci_dev *pdev, pm_message_t mesg) +{ + struct ata_host *host = dev_get_drvdata(&pdev->dev); + int rc = 0; + + rc = ata_host_suspend(host, mesg); + if (rc) + return rc; + + ata_pci_device_do_suspend(pdev, mesg); + + return 0; +} + +int ata_pci_device_resume(struct pci_dev *pdev) +{ + struct ata_host *host = dev_get_drvdata(&pdev->dev); + + ata_pci_device_do_resume(pdev); + ata_host_resume(host); + return 0; +} +#endif /* CONFIG_PCI */ + + +static int __init ata_init(void) +{ + ata_probe_timeout *= HZ; + ata_wq = create_workqueue("ata"); + if (!ata_wq) + return -ENOMEM; + + ata_aux_wq = create_singlethread_workqueue("ata_aux"); + if (!ata_aux_wq) { + destroy_workqueue(ata_wq); + return -ENOMEM; + } + + printk(KERN_DEBUG "libata version " DRV_VERSION " loaded.\n"); + return 0; +} + +static void __exit ata_exit(void) +{ + destroy_workqueue(ata_wq); + destroy_workqueue(ata_aux_wq); +} + +module_init(ata_init); +module_exit(ata_exit); + +static unsigned long ratelimit_time; +static DEFINE_SPINLOCK(ata_ratelimit_lock); + +int ata_ratelimit(void) +{ + int rc; + unsigned long flags; + + spin_lock_irqsave(&ata_ratelimit_lock, flags); + + if (time_after(jiffies, ratelimit_time)) { + rc = 1; + ratelimit_time = jiffies + (HZ/5); + } else + rc = 0; + + spin_unlock_irqrestore(&ata_ratelimit_lock, flags); + + return rc; +} + +/** + * ata_wait_register - wait until register value changes + * @reg: IO-mapped register + * @mask: Mask to apply to read register value + * @val: Wait condition + * @interval_msec: polling interval in milliseconds + * @timeout_msec: timeout in milliseconds + * + * Waiting for some bits of register to change is a common + * operation for ATA controllers. This function reads 32bit LE + * IO-mapped register @reg and tests for the following condition. + * + * (*@reg & mask) != val + * + * If the condition is met, it returns; otherwise, the process is + * repeated after @interval_msec until timeout. + * + * LOCKING: + * Kernel thread context (may sleep) + * + * RETURNS: + * The final register value. + */ +u32 ata_wait_register(void __iomem *reg, u32 mask, u32 val, + unsigned long interval_msec, + unsigned long timeout_msec) +{ + unsigned long timeout; + u32 tmp; + + tmp = ioread32(reg); + + /* Calculate timeout _after_ the first read to make sure + * preceding writes reach the controller before starting to + * eat away the timeout. + */ + timeout = jiffies + (timeout_msec * HZ) / 1000; + + while ((tmp & mask) == val && time_before(jiffies, timeout)) { + msleep(interval_msec); + tmp = ioread32(reg); + } + + return tmp; +} + +/* + * Dummy port_ops + */ +static void ata_dummy_noret(struct ata_port *ap) { } +static int ata_dummy_ret0(struct ata_port *ap) { return 0; } +static void ata_dummy_qc_noret(struct ata_queued_cmd *qc) { } + +static u8 ata_dummy_check_status(struct ata_port *ap) +{ + return ATA_DRDY; +} + +static unsigned int ata_dummy_qc_issue(struct ata_queued_cmd *qc) +{ + return AC_ERR_SYSTEM; +} + +const struct ata_port_operations ata_dummy_port_ops = { + .port_disable = ata_port_disable, + .check_status = ata_dummy_check_status, + .check_altstatus = ata_dummy_check_status, + .dev_select = ata_noop_dev_select, + .qc_prep = ata_noop_qc_prep, + .qc_issue = ata_dummy_qc_issue, + .freeze = ata_dummy_noret, + .thaw = ata_dummy_noret, + .error_handler = ata_dummy_noret, + .post_internal_cmd = ata_dummy_qc_noret, + .irq_clear = ata_dummy_noret, + .port_start = ata_dummy_ret0, + .port_stop = ata_dummy_noret, +}; + +/* + * libata is essentially a library of internal helper functions for + * low-level ATA host controller drivers. As such, the API/ABI is + * likely to change as new drivers are added and updated. + * Do not depend on ABI/API stability. + */ + +EXPORT_SYMBOL_GPL(sata_deb_timing_normal); +EXPORT_SYMBOL_GPL(sata_deb_timing_hotplug); +EXPORT_SYMBOL_GPL(sata_deb_timing_long); +EXPORT_SYMBOL_GPL(ata_dummy_port_ops); +EXPORT_SYMBOL_GPL(ata_std_bios_param); +EXPORT_SYMBOL_GPL(ata_std_ports); +EXPORT_SYMBOL_GPL(ata_host_init); +EXPORT_SYMBOL_GPL(ata_device_add); +EXPORT_SYMBOL_GPL(ata_port_detach); +EXPORT_SYMBOL_GPL(ata_host_remove); +EXPORT_SYMBOL_GPL(ata_sg_init); +EXPORT_SYMBOL_GPL(ata_sg_init_one); +EXPORT_SYMBOL_GPL(ata_hsm_move); +EXPORT_SYMBOL_GPL(ata_qc_complete); +EXPORT_SYMBOL_GPL(ata_qc_complete_multiple); +EXPORT_SYMBOL_GPL(ata_qc_issue_prot); +EXPORT_SYMBOL_GPL(ata_tf_load); +EXPORT_SYMBOL_GPL(ata_tf_read); +EXPORT_SYMBOL_GPL(ata_noop_dev_select); +EXPORT_SYMBOL_GPL(ata_std_dev_select); +EXPORT_SYMBOL_GPL(ata_tf_to_fis); +EXPORT_SYMBOL_GPL(ata_tf_from_fis); +EXPORT_SYMBOL_GPL(ata_check_status); +EXPORT_SYMBOL_GPL(ata_altstatus); +EXPORT_SYMBOL_GPL(ata_exec_command); +EXPORT_SYMBOL_GPL(ata_port_start); +EXPORT_SYMBOL_GPL(ata_port_stop); +EXPORT_SYMBOL_GPL(ata_host_stop); +EXPORT_SYMBOL_GPL(ata_interrupt); +EXPORT_SYMBOL_GPL(ata_mmio_data_xfer); +EXPORT_SYMBOL_GPL(ata_pio_data_xfer); +EXPORT_SYMBOL_GPL(ata_pio_data_xfer_noirq); +EXPORT_SYMBOL_GPL(ata_qc_prep); +EXPORT_SYMBOL_GPL(ata_noop_qc_prep); +EXPORT_SYMBOL_GPL(ata_bmdma_setup); +EXPORT_SYMBOL_GPL(ata_bmdma_start); +EXPORT_SYMBOL_GPL(ata_bmdma_irq_clear); +EXPORT_SYMBOL_GPL(ata_bmdma_status); +EXPORT_SYMBOL_GPL(ata_bmdma_stop); +EXPORT_SYMBOL_GPL(ata_bmdma_freeze); +EXPORT_SYMBOL_GPL(ata_bmdma_thaw); +EXPORT_SYMBOL_GPL(ata_bmdma_drive_eh); +EXPORT_SYMBOL_GPL(ata_bmdma_error_handler); +EXPORT_SYMBOL_GPL(ata_bmdma_post_internal_cmd); +EXPORT_SYMBOL_GPL(ata_port_probe); +EXPORT_SYMBOL_GPL(sata_set_spd); +EXPORT_SYMBOL_GPL(sata_phy_debounce); +EXPORT_SYMBOL_GPL(sata_phy_resume); +EXPORT_SYMBOL_GPL(sata_phy_reset); +EXPORT_SYMBOL_GPL(__sata_phy_reset); +EXPORT_SYMBOL_GPL(ata_bus_reset); +EXPORT_SYMBOL_GPL(ata_std_prereset); +EXPORT_SYMBOL_GPL(ata_std_softreset); +EXPORT_SYMBOL_GPL(sata_std_hardreset); +EXPORT_SYMBOL_GPL(ata_std_postreset); +EXPORT_SYMBOL_GPL(ata_dev_revalidate); +EXPORT_SYMBOL_GPL(ata_dev_classify); +EXPORT_SYMBOL_GPL(ata_dev_pair); +EXPORT_SYMBOL_GPL(ata_port_disable); +EXPORT_SYMBOL_GPL(ata_ratelimit); +EXPORT_SYMBOL_GPL(ata_wait_register); +EXPORT_SYMBOL_GPL(ata_busy_sleep); +EXPORT_SYMBOL_GPL(ata_port_queue_task); +EXPORT_SYMBOL_GPL(ata_scsi_ioctl); +EXPORT_SYMBOL_GPL(ata_scsi_queuecmd); +EXPORT_SYMBOL_GPL(ata_scsi_slave_config); +EXPORT_SYMBOL_GPL(ata_scsi_slave_destroy); +EXPORT_SYMBOL_GPL(ata_scsi_change_queue_depth); +EXPORT_SYMBOL_GPL(ata_scsi_release); +EXPORT_SYMBOL_GPL(ata_host_intr); +EXPORT_SYMBOL_GPL(sata_scr_valid); +EXPORT_SYMBOL_GPL(sata_scr_read); +EXPORT_SYMBOL_GPL(sata_scr_write); +EXPORT_SYMBOL_GPL(sata_scr_write_flush); +EXPORT_SYMBOL_GPL(ata_port_online); +EXPORT_SYMBOL_GPL(ata_port_offline); +EXPORT_SYMBOL_GPL(ata_host_suspend); +EXPORT_SYMBOL_GPL(ata_host_resume); +EXPORT_SYMBOL_GPL(ata_id_string); +EXPORT_SYMBOL_GPL(ata_id_c_string); +EXPORT_SYMBOL_GPL(ata_scsi_simulate); + +EXPORT_SYMBOL_GPL(ata_pio_need_iordy); +EXPORT_SYMBOL_GPL(ata_timing_compute); +EXPORT_SYMBOL_GPL(ata_timing_merge); + +#ifdef CONFIG_PCI +EXPORT_SYMBOL_GPL(pci_test_config_bits); +EXPORT_SYMBOL_GPL(ata_pci_host_stop); +EXPORT_SYMBOL_GPL(ata_pci_init_native_mode); +EXPORT_SYMBOL_GPL(ata_pci_init_one); +EXPORT_SYMBOL_GPL(ata_pci_remove_one); +EXPORT_SYMBOL_GPL(ata_pci_device_do_suspend); +EXPORT_SYMBOL_GPL(ata_pci_device_do_resume); +EXPORT_SYMBOL_GPL(ata_pci_device_suspend); +EXPORT_SYMBOL_GPL(ata_pci_device_resume); +EXPORT_SYMBOL_GPL(ata_pci_default_filter); +EXPORT_SYMBOL_GPL(ata_pci_clear_simplex); +#endif /* CONFIG_PCI */ + +EXPORT_SYMBOL_GPL(ata_scsi_device_suspend); +EXPORT_SYMBOL_GPL(ata_scsi_device_resume); + +EXPORT_SYMBOL_GPL(ata_eng_timeout); +EXPORT_SYMBOL_GPL(ata_port_schedule_eh); +EXPORT_SYMBOL_GPL(ata_port_abort); +EXPORT_SYMBOL_GPL(ata_port_freeze); +EXPORT_SYMBOL_GPL(ata_eh_freeze_port); +EXPORT_SYMBOL_GPL(ata_eh_thaw_port); +EXPORT_SYMBOL_GPL(ata_eh_qc_complete); +EXPORT_SYMBOL_GPL(ata_eh_qc_retry); +EXPORT_SYMBOL_GPL(ata_do_eh);