Chloe [Thu, 21 Jan 2016 20:32:41 +0000 (20:32 +0000)]
Bug 15638: spelling mistake in ~/Koha/reserve/placerequest.pl:4
writen ==> written
To Test-
check that in line 4 of this file "writin" has been corrected to "written"
Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
Hector Castro [Tue, 12 Jan 2016 04:34:01 +0000 (22:34 -0600)]
Bug 15190: Bad utf8 decode to unapi and fixing status code 200
Fix bad utf8 decoding, also fix status code 200 for no parameters passed to
script
To reproduce the issue in OPAC
1) Copy from LOC (Z39.50) ISBN
8467020113 or test it with whichever record with
special characters
2) Open URL in OPAC cgi-bin/koha/unapi?id=koha:biblionumber:4&format=oai_dc
play with oai_dc, srw_dc, mods, mods-full, mods3, mods3-full, rdfdc.
Note: marcxml does not fail
3) Enter the new biblionumber for ISBN
8467020113 or the record of your choise
4) An oai_dc record will display, notice about the bad utf8
decoding characters
5) Search the record in OPAC
6) To reproduce code 200 Ok and 300 Multiple choices play with:
cgi-bin/koha/unapi
cgi-bin/koha/unapi?id=koha:biblionumber:4
7) If possible test in NORMARC (UNIMARC will launch an error because bug 15162)
Test plan
-Apply patch
-Follow steps 2 to 6
-You will see no errors in utf8
Followed test plan, works as expected.
Signed-off-by: Marc Veron <veron@veron.ch>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
Kyle M Hall [Tue, 19 Jan 2016 19:03:53 +0000 (19:03 +0000)]
Bug 15298 [QA Followup] - Fix whitespace issues
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
Chloe [Tue, 19 Jan 2016 01:34:14 +0000 (01:34 +0000)]
Bug 15298 - z39.50 admin setup, options column suggested changes
To Test-
1-first look at the orginal Z39.50/SRU servers administration page
(/cgi-bin/koha/admin/z3950servers.pl?op=delete_confirmed&id=6)
2-apply patch
3-now see the new styling of the "action" drop down tab like the one on
the saved reports page
4-check that each link works (for delete i reccommend copying one then
deleting the copy)
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
Kyle M Hall [Fri, 15 Jan 2016 18:20:09 +0000 (18:20 +0000)]
Bug 15375 [QA Followup] - Fix non-functional restriction message and date
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
Kyle M Hall [Fri, 15 Jan 2016 18:02:49 +0000 (18:02 +0000)]
Bug 15375 [QA Followup] - Remove refereces to biblio and biblionumber for patron messages
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
Marc Véron [Tue, 15 Dec 2015 10:21:08 +0000 (11:21 +0100)]
Bug 15375 - Translatability: Fix issues on OPAC page 'Placing a hold'
Fix several issues with odd translations on opac-reserve.tt due to
string splitting by tags.
In addition, streamline messages to make them similar to the same
messages on the OPAC summary page (Bug 15374)
To test:
- Apply patch
- Log in to OPAC
- with blocked /debarred user (with and without comment and date)
- with user who has to much fines
- with user who has his card marked as lost
- with user with expired account
- with user with uncertain address information
- Try to put holds
- Verify that message about why holds are not possible is correct
and displays nicely and that links in messages work
- Carefully examine code
- Search for regressions
(Amended: stray i removed, test plan updated, removed account that
is about to expire)
Signed-off-by: Aleisha <aleishaamohia@hotmail.com>
I am going to sign off on this because it works as it should and I think the problems I had in comment 8 are a separate bug.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
Marc Véron [Tue, 5 Jan 2016 14:57:07 +0000 (15:57 +0100)]
Bug 15472: Do not display links to circulation.pl if remaining_permissions is not set
If permission 'circulate_remaining_permissions' is not set, links to 'Circulation'
(/circ/circulation-home.pl) on the intranet home page lead to an error
message: "Error: You do not have permission to access this page."
This patch hides the links if the permission is not set.
To test:
- Apply patch
- Log in to the intranet (staff client) with a patron who has the permission
'circulate_remaining_pernissions' not set
- Verify that no links to Circulation appear on the intranet start page
(menu top left and menu in main page area)
- Log in as a user who has the permission set.
- Verify that te links appear as appropriate.
Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
Works as advertised
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
Jonathan Druart [Wed, 20 Jan 2016 16:21:35 +0000 (16:21 +0000)]
Bug 15589: Fix for the staff interface
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Aleisha <aleishaamohia@hotmail.com>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
Aleisha [Mon, 18 Jan 2016 20:09:37 +0000 (20:09 +0000)]
Bug 15589: Changing 'his' to 'their' in OPAC lists
To be more gender neutral
To test:
1) Go to OPAC lists (opac-shelves.pl)
2) Confirm it now says "Allow anyone to remove their own contributed
entries."
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
Hector Castro [Tue, 19 Jan 2016 20:40:02 +0000 (14:40 -0600)]
Bug 15597: Typo in opac-auth-detail.tt
Patch fix a small type
To test:
- Verify that a double punctuation mark colon (:) is fix it.
Signed-off-by: Briana <brianagreally@gmail.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
Hector Castro [Tue, 19 Jan 2016 21:10:03 +0000 (15:10 -0600)]
Bug 15598: Also fixing space near exclamation mark in other files
To test:
-Check that the space near to exclamation mark (!) is fixed
Signed-off-by: Briana <brianagreally@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
Hector Castro [Tue, 19 Jan 2016 21:01:06 +0000 (15:01 -0600)]
Bug 15598: Typo in subscription-add.tt
Fix white space in exclamation mark in subscription-add.tt
To test:
-Check that the space near to exclamation mark (!) is now fix up
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
Gus [Tue, 19 Jan 2016 20:10:59 +0000 (20:10 +0000)]
Bug 15608: Spelling mistake in MARC21slim2OPACDetail.xsl
Seperate -> separate test - check if spelling is changed
Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
Typo fixed
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
Jonathan Druart [Wed, 20 Jan 2016 16:10:33 +0000 (16:10 +0000)]
Bug 15611: Fix another implimented vs implemented
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
Chloe [Tue, 19 Jan 2016 20:56:17 +0000 (20:56 +0000)]
Bug 15611 - Spelling mistake in patroncards/edit-layout.tt
To Test:
check that "implimented" has been changed to "implemented" on both lines
478 and 534
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
Jonathan Druart [Wed, 20 Jan 2016 16:14:22 +0000 (16:14 +0000)]
Bug 15613: Fix 2 other occurrences of paramter vs parameter
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
Gus [Tue, 19 Jan 2016 20:28:43 +0000 (20:28 +0000)]
Bug 15613 - Spelling mistake in opac-shelves.tt
Spelling mistake in opac-shelves.tt paramter ==> parameter
To test - check the change is made in the file
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
Chloe [Tue, 19 Jan 2016 20:40:34 +0000 (20:40 +0000)]
Bug 15614 - Spelling mistake in circ/pendingreserves.tt: Fullfilled
To Test:
Check if "fullfilled" has been changed to "fulfilled" in line 137
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
Gus [Tue, 19 Jan 2016 20:40:45 +0000 (20:40 +0000)]
Bug 15616: Spelling mistake in ./opac-account.tt
sucessfully ==> successfully
Test - Check that the word has been changed in file
Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
Typo fixed correctly
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
Gus [Tue, 19 Jan 2016 23:13:57 +0000 (23:13 +0000)]
Bug 15619: Spelling mistake in memberentry.pl
Test - Check file for 'konw', notice no instance
Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
Typo fixed
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
Gus [Wed, 20 Jan 2016 02:45:16 +0000 (02:45 +0000)]
Bug 15621: Spelling mistake in printinvice.pl
Test- search for writen, if not found patch successful
Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
Typo fixed
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
Gus [Wed, 20 Jan 2016 02:56:07 +0000 (02:56 +0000)]
15623 - Spelling mistake in boraccount.pl Test - Search for writen, if not found fix is correct
Signed-off-by: Mirko Tietgen <mirko@abunchofthings.net>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Gus: You should try git grep writen one more time :)
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
Gus [Wed, 20 Jan 2016 03:42:42 +0000 (03:42 +0000)]
Bug 15624: Spelling mistake in suggestion.pl
Test - due to noone being in a comparison name it was not changed
1. search for choosen, see that it was removed
2. search for agregate, see that it was removed
Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
Typos fixed
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
Jonathan Druart [Tue, 9 Dec 2014 08:48:58 +0000 (09:48 +0100)]
Bug 6679: (follow-up) fix 9 perlcritic violations in C4/TmplTokenType.pm
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
Mason James [Mon, 24 Sep 2012 23:21:43 +0000 (11:21 +1200)]
Bug 6679 - Fixing code so it passes basic Perl:::Critic tests
opac/ilsdi.pl: Stricture disabled at line 217, column 17. See page 429 of PBP. (Severity: 5)
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
Mason James [Tue, 26 Jun 2012 17:07:46 +0000 (05:07 +1200)]
Bug 6679 - [SIGNED-OFF] fix 2 perlcritic violations in C4/Installer/PerlModules.pm
Expression form of "eval" at line 71, column 9. See page 161 of PBP. (Severity: 5)
Expression form of "eval" at line 85, column 13. See page 161 of PBP. (Severity: 5)
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
Mason James [Tue, 26 Jun 2012 13:08:34 +0000 (01:08 +1200)]
Bug 6679 - [SIGNED-OFF] fix 9 perlcritic violations in C4/TmplTokenType.pm
- Subroutine prototypes used at line 86, column 1. See page 194 of PBP. (Severity: 5)
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
Aleisha [Tue, 29 Dec 2015 19:39:20 +0000 (19:39 +0000)]
Bug 14480: Silences warn from editing patron
Argument "" isn't numeric in numeric lt (<)
TEST PLAN
---------
1) Go to any patron in staff client
2) Click 'Edit'
3) Check error logs
-- warnings should exist.
4) Apply patch
5) Reload page
-- warnings should not be triggered.
6) Add restriction and save
7) Go back to edit screen
-- restriction should be shown
8) Remove restriction and save
9) Go back to edit screen
-- Should say "Patron is currently unrestricted"
10) Run koha qa test tools.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
Martin Stenberg [Mon, 21 Sep 2015 11:16:39 +0000 (13:16 +0200)]
Bug 14555: Warns in opac-search.pl
Avoid use of uninitialized value in split
== Test plan ==
1. Go to opac advanced search
2. Click "Search" without any search query
3. Log file will show "Use of uninitialized value in split at ..."
4. Apply this patch
5. Repeat step 1 and 2
6. Log file should no longer show "Use of uninitialized value in split at ..."
Sponsored-by: Regionbibliotek Halland / County library of Halland
Signed-off-by: Aleisha <aleishaamohia@hotmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
At step 2 you have to check a criteria
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
Natasha [Tue, 19 Jan 2016 02:51:49 +0000 (02:51 +0000)]
Bug 14624 - <<items.content>> for advance_notices.pl wrongly documented
To Test Check perldoc for misc/cronjobs/advance_noitces.pl
and see that the documentation matches.
Ran:
$ perldoc misc/cronjobs/advance_noitces.pl
Saw expected changes.
Koha QA test tools pass too.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Switched due date for the name of the database column
date_due as the parameter expects a list of database
column names.
Aleisha [Mon, 11 Jan 2016 21:15:46 +0000 (21:15 +0000)]
Bug 14641: [SIGNED-OFF] Warns in subscription-add.pl
Removes warn using Jonathan's suggestion!
To test:
1) Reproduce warns by clicking New Subscription
2) Apply patch
3) Click New Subscription again
4) Confirm warns are gone
Signed-off-by: Magnus Enger <magnus@libriotech.no>
Patch removes the warn that come when clicking "New subscription"
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
Briana [Tue, 19 Jan 2016 01:21:50 +0000 (01:21 +0000)]
Bug 14810 Improve messages in patron anonymizing tool
To test:
Create circulation records
Go to 'http://localhost:8081/cgi-bin/koha/tools/cleanborrowers.pl'
Anonymize patron checkout history
Message should read 'All checkouts older than [date] have been
anonymized
When patch is not applied, message reads 'All patrons with checkouts
older than [date] have been anonymized"
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
Katrin Fischer [Sat, 21 Nov 2015 23:29:32 +0000 (00:29 +0100)]
Bug 15100: MARC21 - make display of "Dates associated with a name" optional
With the changes for RDA now more subfields for the fields
100, 110, 111, and 700, 710, 711 are displayed.
One of them is $d - Dates associated with a name
This patch adds separate treatment of the $d subfield and
wraps it in a span with the class "authordates".
This makes it possible to hide the information with CSS.
To test:
- Make sure you have several records with $d catalogued
- Check the display in result list and detail page
with and without the page.
- Check, if there is a difference in display
- Check if the dates are correctly wrapped in a span
- Try to hide the information, using the following
entry in your *UserCSS preferences:
.authordates { display: none; }
Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
Works as advertised
Signed-off-by: Jesse Weaver <jweaver@bywatersolutions.com>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
Natasha [Tue, 19 Jan 2016 01:09:15 +0000 (01:09 +0000)]
Bug 15195 - patron details should open in tab
Deleted View record link and made patron details open in a new tab.
To Test: Edit personal details for a user on opac and submit update
request.
In staff client go to patrons requesting modifications.
Confirm view record link is gone and patron details opens in new tab.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
I don't think it's a good idea to open a new tab (let the user decide)
but the behavior already existed before this patch.
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
Marc Véron [Fri, 11 Dec 2015 17:06:10 +0000 (18:06 +0100)]
Bug 15355: Translatability: Fix issues on check in page
This patch fixes translatability issues on checkin page, due to sentence splitting by html tags at
several places and ambiguous word 'to'.
Additionally, fix message related to syspref AllowReturnToBranch set to 'only the library where the
item is checked out from' (it wrongly displays the home library instead of the holding library),
and streamline the display of similar messages to look more consistent.
To test:
- Apply patch
- Go to Home > Circulation > Check in
- Do check ins with different expected results / messages
- Verify that the messages are meaningful and display nicely
- Play with items checked out / checked in at different branches (home branch, holding branch, other
branch) and different settings for syspref 'AllowREturnToBranch' and verify that the messages display
properly (with correct home rsp. holding branch)
- Carfully review code changes.
Signed-off-by: Aleisha <aleishaamohia@hotmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
Winona Salesky [Mon, 4 Jan 2016 14:33:00 +0000 (09:33 -0500)]
Bug 15444 - MARC21: Repeated 508 not correctly formatted (missing separator)
This patch adds a separator for multiple 508 fields to the XSLT display in the staff and OPAC detail view.
Separator is wrapped in span with class=‘separator’ for easy manipulation via css.
To test:
* Search the OPAC
* Click the title with multiple 508 fields
* Make sure the fields display properly
* Repeat for a few more titles
* Repeat in the Staff Client
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
Chloe [Tue, 19 Jan 2016 03:09:50 +0000 (03:09 +0000)]
Bug 15468 - Search links on callnumbers with parentheses fails on OPAC results page
To Test:
1-before plugin search in opac for a call number with either a "(" or a ")" in it
2-it should come back with no results
3-use plugin
4-re-search the call number with "(" or ")"
5-the search should come back with results
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
It seems this only works with OPAC XSLT for results page turned off
and OPACItemsResultsDisplay turned on. - Then the callnumbers
in the result list will be linked for searching.
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
Marc Véron [Wed, 6 Jan 2016 09:29:01 +0000 (10:29 +0100)]
Bug 15476: Listname not always displayed in shelves.pl
To reproduce:
- In staff client, go to List and click on the name of an
existing list.
- At the bottom of the screen, you see a title "Add an item to "
but no list name.
To test:
- Apply patch
- Verify that listname appears after "Add an item to "
Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
Works as advertised. Label/legend for listname displayed Ok
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
Marcel de Rooy [Wed, 13 Jan 2016 10:16:02 +0000 (11:16 +0100)]
Bug 15553: [QA Follow-up] Replace hardcoded tmp and add instance to dirname
If you use multiple instances on one server, you could have the situation
that instance A creates the cgisess subfolder and instance B could have a
permission problem. This patch resolves that by allowing each instance to
have its own cgisess subfolder.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
Blou [Mon, 11 Jan 2016 21:41:11 +0000 (16:41 -0500)]
Bug 15553 - [SIGNED-OFF] cgisess_ files polluting the /tmp directory
When some users want to improve performance, one suggestion is to switch the syspref "sessionstorage" to 'tmp',
which store the session info in the /tmp directory instead of the database.
Depending on the frequency of the cleaning process (or lack thereof),
this can be heavy pollution into the /tmp directory, making it unusable.
"rm cgi*" would not even work since cgi* extends to over 8000 items...
A simple fix is to modify the target directory in C4/Auth.pm to /tmp/cgisess.
Testing scenario:
1) change the syspref SessionStorage to 'tmp'
2) Log into the OPAC, validate that a file named /tmp/cgisess_(something) got created
3) Apply the patch
4) Log into the OPAC, validate that a file /tmp/cgisess/cgisess_(something) got created
Signed-off-by: Magnus Enger <magnus@libriotech.no>
Works as advertised. Session files are created in /tmp/cgisess/ instead
of directly in /tmp. I usually store sessions in memcached, but a
couple of times memcached has died on me, and before I knew it, /tmp
was so full of sessions files, I could not easily delete them with
"rm /tmp/cgisess*". Being able to delete /tmp/cgisess/ should be a
bit easier.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
Aleisha [Thu, 14 Jan 2016 02:33:23 +0000 (02:33 +0000)]
Bug 15577: Correcting link redirect
To test:
1) Add a restriction to a user
2) Log in as that user in the OPAC
3) Click 'your account page' link in the yellow mesage
4) Confirm you are taken to opac-account.pl
Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
Works as advertised
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
Chloe [Tue, 19 Jan 2016 21:18:09 +0000 (21:18 +0000)]
Bug 15592 - spelling mistake in ~/Koha/koha-tmpl/intranet-tmpl/p./plugins/plugins-upload.tt
To Test:
checkthat "extention" has been changed to "extension" on line 27
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
Chloe [Tue, 19 Jan 2016 21:02:13 +0000 (21:02 +0000)]
Bug 15609 - spelling mistake in :692: writen ==> written
To test:
Check that "writen" has been changed to "written" on line 692
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
Jonathan Druart [Mon, 11 Jan 2016 11:32:23 +0000 (11:32 +0000)]
Bug 2669: Change checkboxes to radio buttons on dictionary
On creating new dictionary for report, the choice between "All dates"
and "Date range" should be a real radio button, not 2 radio buttons with
different names (which means they could be selected altogether...)
Note that I don't understand what means 'All dates', there is no
condition generated for the dictionary. We should not have to select a
field if we don't want to add a condition on it :)
Test plan:
Create a new dictionary for the Patron module, then a date field
(dateenrolled or birthdate, etc.)
Confirm that the radio buttons now behave as radio buttons...
Signed-off-by: Aleisha <aleishaamohia@hotmail.com>
Looks so much nicer too!
Radio buttons display as expected.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
Jonathan Druart [Wed, 6 Jan 2016 14:25:14 +0000 (14:25 +0000)]
Bug 4912: Redirect to the appropriate view after editing/deleting a list
There are 2 places where a list can be edited/deleted: on the list view
and the list content view. After the edition, the user expect to be
redirect to the previous page.
This patch implements that.
Test plan:
At the OPAC, delete and edit a list from the 2 differents places.
Confirm that you are redirect to the page you come from.
With patch, redirects work as expected.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
Owen Leonard [Wed, 23 Apr 2014 16:59:25 +0000 (12:59 -0400)]
Bug 6322 - It's possible to view lists/virtualshelves even when virtualshelves is off
If the user knows the URL for OPAC lists they can access them even with
the virtualshelves preference turned off. This patch copies the solution
added to opac-topissues.pl by Bug 10595 and applies it to OPAC lists
pages.
To test, apply the patch and set the virtualshelves system preference to
"don't allow."
- Navigate to /cgi-bin/koha/opac-shelves.pl. You should be redirected to
an Error 404 page.
- Also check:
- /cgi-bin/koha/opac-shareshelf.pl.
- /cgi-bin/koha/opac-downloadshelf.pl
- /cgi-bin/koha/opac-sendshelf.pl
- /cgi-bin/koha/opac-addbybiblionumber.pl
- Turn virtualshelves back on. Access to lists and list sharing should
be restored.
Signed-off-by: Aleisha <aleishaamohia@hotmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
Marcel de Rooy [Thu, 14 Jan 2016 11:29:45 +0000 (12:29 +0100)]
Bug 9754: koha-remove optionally includes var/lib and var/spool
Currently, the files in the folder /var/lib/koha/[instance] and also
in /var/spool/koha/[instance] are not removed.
This patch adds the option -p|--purge-all to include those two
directories when removing files.
Note: There was a small bug in the for loop. On the -k line the extra
shift statement is one too much.
NOTE: Verify that you use the adjusted koha-remove in the test plan
and not accidentally an older version of this script.
Test plan:
[1] Create an instance test.
[2] Run koha-remove and verify that /var/lib/koha/test still exists.
[3] Create an instance test2.
[4] Run koha-remove -k -p and verify that the sql database still exists
but the two instance folders in var/lib/koha and var/spool/koha are
gone.
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
Aleisha [Tue, 12 Jan 2016 22:15:23 +0000 (22:15 +0000)]
Bug 13177: Accidental copy/paste error fix
Confirm it now says Rotating Collections instead of Patron Import in the last line, and the link is correct.
Signed-off-by: Nicole Engard <nengard@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
Aleisha [Mon, 21 Dec 2015 21:27:00 +0000 (21:27 +0000)]
Bug 13177: Help page for Rotating Collections
To test:
Go to Tools -> Rotating Collections and click Help in the top-right. Confirm the Help page shows and gives correct accurate instructions with no typos or grammatical errors.
Help displays as expected.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Nicole Engard <nengard@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
Marc Véron [Mon, 28 Dec 2015 11:15:18 +0000 (12:15 +0100)]
Bug 14015 - Checkout: Fix software error if barcode '0' is given
To reproduce the bug:
- Go to Home > Circulation > Checkouts > [a patron]
- Enter 0 (zero) in barcode field and hit Enter
Result:
Software error
Can't use string ("1") as a HASH ref while "strict refs" in use
at /usr/share/kohaclone/circ/circulation.pl line 473
To test:
- Apply patch
- Repeat steps above
- Verify that the sofware error is gone and that you get a
message as with other invalid barcodes.
- Test with other values: '00', '000', existing barcode,
and a barcode that does not exist
- Test with empty barcode (for printing slip)
- Search for regressions
This patch implements Jonathan's solution (see comment #15)
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Jonathan Druart [Fri, 21 Aug 2015 09:43:13 +0000 (10:43 +0100)]
Bug 14133: Print notices should be generated with the print template
If the overdue notice to send is an email or a SMS and the patron does
not provided such information, a print notice is generated.
But it will be generated with the email or sms template, which is not
useful, especially in the SMS case.
The template to use should be the print one.
Test plan:
0/ Does not apply this patch and Correctly define the overdue rules to generate
an overdue notice to the message_queue table.
Check email + SMS
1/ Define an email address and a SMS number for a patron
2/ Generate the overdue notices (misc/cronjobs/overdue_notices.pl [-t])
3/ 2 notices should have been generated:
mtt=email with the email template used
mtt=sms with the sms template used
4/ Truncate the message_queue table
5/ Remove the email address and repeat 2
6/ Only 1 notice should have been generated:
mtt=print with the email template used
7/ Truncate the message_queue table
8/ Remove the sms alert number and repeat 2
9/ 2 notices should have been generated:
mtt=print with the email template used (or sms I suppose)
10/ Apply this patch and repeat previous steps.
The print notices should be generated with the print template.
IMPORTANT NOTE: This test plan does not take into account the notices
generated for the staff ("These messages were not sent directly to the
patrons."). However the behavior will also change, the print template
will be used in all cases. Is it what we want?
Signed-off-by: Chris <chris@bigballofwax.co.nz>
Seems fine by me
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
Marc Véron [Mon, 11 Jan 2016 10:59:14 +0000 (11:59 +0100)]
Bug 15135: Remove Warning Subroutine HasOverdues redefined
In staff client, while displying patron related pages (e.g. moremember.pl) you get a warning like:
moremember.pl: Subroutine HasOverdues redefined at /usr/share/kohaclone/Koha/Template/Plugin/Borrowers.pm line 52.
This occurs with all pages that have [% USE Borrowers %] in their templates (directly or via members-toolbar.inc)
To test:
- Go to Home > Patrons > Patron details for....
- Search for warning above in log
- Apply patch
- Verify that no more warnings appear
- Verify that patron pages behave as before
(Solution as of comment #18)
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Verified that warning disappears with this patch.
Signed-off-by: Jacek Ablewicz <abl@biblos.pk.edu.pl>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
Jonathan Druart [Mon, 28 Dec 2015 15:47:01 +0000 (15:47 +0000)]
Bug 15209: Check the parameter at the beginning of the subroutines
It seems better to check if parameters exist at the beginning of a
subroutine.
It makes the code easier to read and there is 1 indentation level less.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
Jonathan Druart [Mon, 28 Dec 2015 15:46:59 +0000 (15:46 +0000)]
Bug 15209: Add tests
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
Colin Campbell [Wed, 18 Nov 2015 14:53:58 +0000 (14:53 +0000)]
Bug 15209 Validate passed MARC::Record objs in C4::Koha
Ensure that a passed MARC::Record is defined before calling
its methods. Otherwise you are open to occurences of the
error 'Can't call method "field" on an undefined value'
In a CGI environment you can live with such sloppiness but
in a persistent environment the error can cause the instance
to abort.
Made all routines passed a MARC::Record validate it before calling
its methods. Changed the parameter name from the meaningless
record to marcrecord to indicate its content. Added an explicit return
for all cases where no valid data returned. Cleaned up some logic for
clarity. I think we can assume that GetNormalizedOCLCNumber meant to
look at all 035s till it found an OCLC number not just the first.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
Jonathan Druart [Thu, 7 Jan 2016 12:50:35 +0000 (12:50 +0000)]
Bug 15299: Ask for confirmation when deleting a report from second page
Some link are hidden when loading the page, by DataTables, we need to
use the delegate jQuery method to attach a handler to the click event
for all delete links (the ones existing when loading the page, and the
ones displayed in the future).
Test plan:
Have more than 20 reports defined
Go on the report list view, then change the number of elements
displayed, click "action>delete". You should get a warn.
Signed-off-by: Liz Rea <liz@catalyst.net.nz>
Confirm that there is now a confirmation on delete from the list -> action menu
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
Jonathan Druart [Mon, 14 Dec 2015 09:32:50 +0000 (09:32 +0000)]
Bug 15357: Display existing holds even if no items exist
If all the items have been deleted for a record and holds exist, the
holds are not displayed.
You are not able to delete the items from the record detail page, but
you can from the items page.
Test plan:
1 - Place 1 or more title level holds on a record.
2 - Delete each item individually.
3 - Note that you see the number of holds on the record details page
With this patch, that holds are accessible via the holds tab.
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
Jonathan Druart [Tue, 19 Jan 2016 16:58:07 +0000 (16:58 +0000)]
Bug 15391: Fix HoldsQueue.t tests
Prior to this patch, in HoldsQueue.t:
63 my @item_types = C4::ItemType->all;
64 my $itemtype = grep { $_->{notforloan} == 1 } @item_types
65 or BAIL_OUT("No adequate itemtype");
Then we use the $itemtype variable (which contains the number of item types not for loan):
92 $dbh->do("INSERT INTO biblioitems (biblionumber, marcxml, itemtype)
93 VALUES ($biblionumber, '', '$itemtype')");
There is obviously something wrong here.
The code should be
64 my @not_for_loan = grep { $_->{notforloan} == 1 } @item_types
65 or BAIL_OUT("No adequate itemtype");
66 my $itemtype = $not_for_loan[0]->{itemtype};
But then some tests don't pass:
Actually the problem comes from:
commit
bfbc646fdd9ca4b90a0bc2751d0faa95d9e93ba1
Bug 10336: HoldsQueue.t needs to create its own data
-my $itemtype = $dbh->selectrow_array("SELECT min(itemtype) FROM itemtypes WHERE notforloan = 0")
+my @item_types = C4::ItemType->all;
+my $itemtype = grep { $_->{notforloan} == 1 } @item_types
The line should have been:
my $itemtype = grep { $_->{notforloan} == 0 } @item_types
Test plan:
Confirm that the tests still pass after this patch applied.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
All tests pass pre and post patch
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
Jonathan Druart [Tue, 5 Jan 2016 15:41:36 +0000 (15:41 +0000)]
Bug 15398: Hide Staff members only in the patron deletion/anonymization tool
On bug 9076 (commit
568a4c1230ee9a4002181fcab2c083faf6c323a9), the plan
was to hide the Staff members from the tool.
But the test was wrong, it was done on the category_code instead of the
category_type value.
Test plan:
1/ Create a category 'Student' which is not part of the Staff
(category_code=S, category_type!=S)
2/ Create a staff category (category_type=S)
3/ Go on the deletion/anonymization tool (tools/cleanborrowers.pl) and
confirm that the category Student category is displayed in the dropdown
list.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Work as described, no errors.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
http://bugs.koha-community.org/show_bug.cgi?id=15308
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
Jonathan Druart [Wed, 20 Jan 2016 10:28:58 +0000 (10:28 +0000)]
Bug 15626: Remove log4perl.conf when using koha-remove
if you create a koha install using koha-create, and remove it with
koha-remove, the /etc/koha/sites/$SITE/ directory won't be removed,
because the /etc/koha/sites/$SITE/log4perl.conf has not been removed by
this script.
Test plan:
Use this koha-remove script to remove a koha install
Without this patch, the /etc/koha/sites/$SITE directory won't be
removed.
With this patch applied, the directory will be correctly removed.
Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
Works as advertised
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
Chloe [Thu, 21 Jan 2016 23:47:42 +0000 (23:47 +0000)]
Bug 12045 - Transfer impossible if barcode includes spaces
have changed the code which strips the white space to only remove the leading and trailing white space instead
To Test-
1- go to circulation -> transfer
2- attempt to tranfer an item where the barcode has a space in the middle of it
3- it should fail
4- apply patch
5- try again
6- it should work
NOTE: I purposefully added: die "($barcode)";
Before, all spaces were removed.
' white space ' became '(whitespace)'
After, only external spaces were remove
' white space ' became '(white space)'
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
Jonathan Druart [Tue, 19 Jan 2016 08:55:49 +0000 (08:55 +0000)]
Bug 15188: Do not remove unused auths if zebra is not reachable
Other conn errors should be checked (wrong user/pwd, etc.)
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
Alex Arnaud [Tue, 29 Dec 2015 15:46:38 +0000 (16:46 +0100)]
Bug 15188 - Fixes remove_unused_authorities.pl will delete all authorities if zebra is not running
Test plan:
1) Shut down zebra: koha-zebra-ctl.sh stop
2) Execute the script: remove_unused_authorities.pl (with -t if you don't want to really delete from your database).
3) Check that the script would have deleted all the authorities (eg: 31449 authorities parsed, 31449 deleted and 0 unchanged because used).
4) Apply patch
5) Run, notice that the script dies because zebra is unavailable
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
Kyle M Hall [Fri, 8 Jan 2016 17:00:36 +0000 (17:00 +0000)]
Bug 15530 - Editing a course item via a disabled course disables it even if it is on other enabled courses
It appears that if the course item is edited by clicking the edit link
from an active course, the course item will be set to enabled and the
fields will be swapped, if the same course item is edited from a course
that is *not* active, the course item will be set to *not* enabled, and
the original fields will be swapped back in!
The short term work-around is to only edit course items from an enabled
course if the item has a course that is enabled. If all the courses it
is on are disabled, it doesn't matter what course the item is edited
from.
Test Plan:
1) Create two courses, 1 enabled and 1 disabled
2) Add an item as a course reserve to both courses
3) Edit the course reserve data for the item via the enabled course
4) Note the course item is enabled ( easy way is to check the database )
5) Edit the same course reserve data, but via the disabled course
6) Note the course item is now disabled even though it is part of
an enabled course!
7) Apply this patch
8) Repeat steps 1 through 5
9) Note the course item is still enabled
Signed-off-by: Margaret Holt <mholt@bastyr.edu>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
Kyle M Hall [Fri, 8 Jan 2016 17:00:18 +0000 (17:00 +0000)]
Bug 15530 - Add Unit Test
Signed-off-by: Margaret Holt <mholt@bastyr.edu>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
Julian Maurice [Tue, 12 Jan 2016 15:49:15 +0000 (16:49 +0100)]
Bug 15572: TransformHtmlToMarc - rewrite the loop
This rewrites the while loop into a for loop, so $i still gets
incremented when we call next
Signed-off-by: Frédéric Demians <f.demians@tamil.fr>
Make sense. Add readability. Infinite loop no more possible.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Jesse Weaver <jweaver@bywatersolutions.com>
Patches previously applied in reverse order.
Jonathan Druart [Tue, 12 Jan 2016 15:23:33 +0000 (15:23 +0000)]
Bug 15572: Add tests for TransformHtmlToMarc
Signed-off-by: Frédéric Demians <f.demians@tamil.fr>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Jesse Weaver <jweaver@bywatersolutions.com>
Frédéric Demians [Tue, 12 Jan 2016 10:53:11 +0000 (11:53 +0100)]
Bug 15572: Follow-up to fix error on authority creation
Bug 6657 modified the way C4::Biblio::TransformHtmlToMarc operates in order to
solve an issue occuring during biblio record cataloguing. But this function is
also used by authorities cataloguing, and the code in this case is irrelevante.
This followup allows to distinguish for which kind of record
TransformHtmlToMarc is called: biblio/authority.
A bug appears in authority creation without this patch in some circunstances:
when authid is linked to 001 field.
Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
Tested with a new authority record
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Jesse Weaver <jweaver@bywatersolutions.com>
Jesse Weaver [Mon, 25 Jan 2016 14:01:29 +0000 (07:01 -0700)]
Revert "Bug 15572: TransformHtmlToMarc - rewrite the loop"
This reverts commit
1eab5c199d21a622abde7e47ca248d80e882ca46.
Jesse Weaver [Mon, 25 Jan 2016 14:01:28 +0000 (07:01 -0700)]
Revert "Bug 15572: Follow-up to fix error on authority creation"
This reverts commit
2ca9bd5dc247ae26225cbc299c1bc0883bc444e0.
Jesse Weaver [Mon, 25 Jan 2016 14:01:25 +0000 (07:01 -0700)]
Revert "Bug 15572: Add tests for TransformHtmlToMarc"
This reverts commit
467355d846a047ba3e77c0e9d73bf2323ab4fd67.
Kyle M Hall [Fri, 15 Jan 2016 17:37:17 +0000 (17:37 +0000)]
Bug 15542 [QA Followup] - Tidy member-password.pl
No other patches in process modify member-password.pl, now would be
a great time to tidy it!
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
Kyle M Hall [Fri, 15 Jan 2016 17:35:49 +0000 (17:35 +0000)]
Bug 15542 [QA Followup] - Fix code error
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
Jonathan Druart [Mon, 11 Jan 2016 10:40:27 +0000 (10:40 +0000)]
Bug 15542: Change for the German style address format
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
Jonathan Druart [Mon, 11 Jan 2016 09:18:30 +0000 (09:18 +0000)]
Bug 15542: Always display the patron's info the same way.
The patron's information displayed in the member module
(includes/circ-menu.inc and includes/member-display-address-style-*.inc)
are not always displayed the same way.
Sometimes the streetnumber is missing, sometimes it's the streettype.
Sometimes the streettype is after the address, sometimes before...
Test plan:
Go on a patron detail page, and open all the tabs on the left (Check
out, Fines, Notices, etc.)
Without this patch, the patron's info displayed will differ from one page to
another.
With this patch, they will be displayed the same everywhere.
Followed test plan, works as expected. (Tested both patches together.)
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
Jonathan Druart [Wed, 13 Jan 2016 16:36:47 +0000 (16:36 +0000)]
Bug 15569: Do not displayed "automatic renewal" if the patron cannot checkout
If the patron cannot checkout (debarred) and on-site checkout is
enabled, the "Automatic renewal" checkbox should not be displayed on the
circulation screen.
Test plan:
Enable OnSiteCheckouts and OnSiteCheckoutsForce
Debar a patron and go on the circulation page.
Without this patch, the automatic renewal checkbox is displayed.
With this patch applied, it's not.
Patch works as expected.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
Aleisha [Thu, 14 Jan 2016 02:26:34 +0000 (02:26 +0000)]
Bug 15576: Fix for incorrect link redirect
To test:
1) Edit a user to have an uncertain address (gone no address)
2) Log in as that user on OPAC
3) Click 'online update form' link in the yellow message
4) Confirm you are taken to opac-memberentry.pl
Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
Works as described
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
Jonathan Druart [Tue, 19 Jan 2016 15:10:42 +0000 (15:10 +0000)]
Bug 15601: Fix TestBuilder tests
Bug 13624 modified the DB structure for overduerules.
The TestBuilder tests (t/db_dependent/TestBuilder.t) based some of its
checks on this structure.
Test plan:
prove t/db_dependent/TestBuilder.t
Should return green.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
Jonathan Druart [Fri, 22 Jan 2016 09:10:29 +0000 (09:10 +0000)]
Bug 15602: Remove cursor:pointer
With the href attribute, the cusor will be displayed as a pointer.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
Natasha [Wed, 20 Jan 2016 03:47:06 +0000 (03:47 +0000)]
Bug 15602: Accessibility: Can't tab to add link in patron card creator add patrons popup
To Test -
1. Go onto Tools and then click on Patron Card Creator.
2. Click on New and then Card Batch.
3. Add a borrowernumber then add patron.
4. Search for a patron.
5. Using the tab key try to navigate onto the Add link.
6. Notice it skips Add.
7. Apply the patch and then repeat steps 1-5, notice the add link can now be accessed through using the keyboard.
Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
Works as described.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
Natasha [Wed, 20 Jan 2016 01:22:45 +0000 (01:22 +0000)]
Bug 15603 - Accessibility: Can't tab to select link in budgets add user popup
To Test -
1. If you don't have a budget and a fund, make at least one of each.
2. Go to funds from budgets.
3. Either make a new fund or edit an existing one and then click Edit owner, which will bring up a pop-up tab.
4. Search for a patron.
5. Using the tab key try to navigate onto the Select link.
6. Notice it skips select.
7. Apply the patch and then repeat steps 3-5, notice the select link can now be accessed through using the keyboard.
Signed-off-by: Mirko Tietgen <mirko@abunchofthings.net>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
Owen Leonard [Tue, 19 Jan 2016 16:36:44 +0000 (11:36 -0500)]
Bug 14193 - Accessibility: Searching patrons using the alphabetic index doesn't work
Using a mouse to click on the alphabetic index letters works even though
the anchor markup doesn't contain an href attribute. However you
can't tab to them using the keyboard, and I assume the issue with
screen readers is related.
This patch adds a dummy href attribute and a class-based click handler
so that we can get rid of the "onclick" attribute in the markup.
To test, apply the patch and visit the "Patrons" section.
1. Use the tab key to move the focus to one of the alphabet links.
2. Hit "Enter" and confirm that the search is performed correctly.
3. Click any of the alphabet links and confirm that clicking works as
well.
4. View the details of any patron and click the "Add child" button.
5. In the "Guarantor information" section click the "Change" button.
6. In the search popup, use the tab key to move the focus to one of the
alphabet links.
2. Hit "Enter" and confirm that the search is performed correctly.
3. Click any of the alphabet links and confirm that clicking works as
well.
Signed-off-by: Briana <brianagreally@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
Jonathan Druart [Tue, 12 Jan 2016 10:21:16 +0000 (10:21 +0000)]
Bug 15550: Fix authority search and detail at the OPAC
The author of Bug 15381 (me!) has mismatch the objects he was
manipulating and forgotten to update a template.
for the opac-aythorities-home, the variable is named authority_types,
not authtypesloop.
In opac-authoritiesdetail.pl, the $record is a MARC::Record and there is
no authtypecode method. We need to retrieve the authtypecode using
the new Koha::Authorities module.
Test plan:
Search for authorities at the OPAC and click on the detail link to go to
the detail page.
Without this patch, you will get errors.
With this patch, the errors should have gone and everything should work
as before bug 15381.
Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
Works as described. Pull down for choosing the auth_type displayed again
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
Jonathan Druart [Wed, 20 Jan 2016 09:40:25 +0000 (09:40 +0000)]
Bug 15560: Fix display of multiple item types in pending reserves report
Same fix as previous patch, but for item types.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
Katrin Fischer [Wed, 20 Jan 2016 00:46:14 +0000 (01:46 +0100)]
Bug 15560: Fix display of multiple branches and locations in pending reserves report
The patches from bug 12152 broke the display on the pending reserves/
holds to pull report when items from multiple branches and with
multiple locations were displayed. The table cells were left empty.
To test:
- Add a record with at least 2 items from different locations and
holdingbranches
- Open the 'holds to pull' report
- Verify all branches and locations show with their correct
description
Signed-off-by: Natasha <tasham_8@hotmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
Jonathan Druart [Thu, 14 Jan 2016 12:27:55 +0000 (12:27 +0000)]
Bug 15578: Make sure all params will be taken into account when instantiating
The tests in t/db_dependent/Koha_Authority.t expects at least 1
authority record in the DB to run them, otherwise they are skipped.
On our integration server, the DB does not contain any records, and the
tests are skipped.
Unfortunately these tests were testing the authid method of
Koha::MetadataRecord::Authority.
Test plan:
Apply the first patch, launch tests
=> Fail
Apply the second patch, launch tests
=> \o/
Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
Test pass successfuly
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
Jonathan Druart [Thu, 14 Jan 2016 12:27:32 +0000 (12:27 +0000)]
Bug 15578: Insert authority records before processing tests
Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
Marc Véron [Thu, 21 Jan 2016 15:25:33 +0000 (16:25 +0100)]
Bug 15579: Fix permission for batch record modification
To test:
- For a patron, permissions 'catalogue' and 'records_batchmod' only
- Log in as this patron
- Go to /cgi-bin/koha/tools/batch_record_modification.pl
Without patch: You have no permisson to acces the page.
With patch: Page 'Batch record modification' displays as expected.
(Amended to fix wrong test plan)
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
Gus [Tue, 19 Jan 2016 20:01:41 +0000 (20:01 +0000)]
Bug 15606: Fix spelling mistake in MARC21slim2OPACDetail.xsl
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Jesse Weaver <jweaver@bywatersolutions.com>
Jonathan Druart [Wed, 20 Jan 2016 08:45:48 +0000 (08:45 +0000)]
Bug 15607: batch patron mod - do not update dates if not given
Bug 15332 fixed a bug but introduced a bigger one. Even if dateenrolled and
dateexpiry are not modified, they will be updated to today.
Indeed, dt_from_string returns today without parameters.
Test plan:
- Set dateenrolled and expirydate for a patron
- Using the batch patron mod tool, update any field but dateenrolled and
expirydate.
=> Without this patch, the 2 date fields should be set to today
=> With this patch applied, the 2 date fields should not have been
modified.
Signed-off-by: Karam Qubsi <karamqubsi@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jesse Weaver <jweaver@bywatersolutions.com>
Briana [Tue, 19 Jan 2016 00:57:34 +0000 (00:57 +0000)]
Bug 14406: When adding messages in patron account, only first name is shown in pull down
To test:
Log in to staff patron account
Go to Checkout tab
Click 'Add a new message'
Drop down box should show 'Staff - Internal Note' and 'OPAC - [Full name
of patron]'
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Made a tiny change during signoff: uncapitalized "note"
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Jesse Weaver <jweaver@bywatersolutions.com>
Chloe [Mon, 18 Jan 2016 22:31:19 +0000 (22:31 +0000)]
Bug 14613: Send cart window is too small in staff and hides 'send' button
To Test: Add an item to cart click "cart" click "send"
confirm that the send window is larger and the send button is
visible
NOTE: Remember to clear cache to refresh javascripts.
This is much more visible if you zoom in 10% or more.
This is larger, but more of a stop gap if you've got a large zoom.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Jesse Weaver <jweaver@bywatersolutions.com>
Natasha [Mon, 18 Jan 2016 22:59:03 +0000 (22:59 +0000)]
Bug 14538: editing perl doc for CalcFine
To Test:
Read perldoc C4/Overdues.pm
Confirm that it says CalcFine returns four values and that rest of the documentation is correct
NOTE: only a little visual ugliness, but definitely an improvement.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Jesse Weaver <jweaver@bywatersolutions.com>
Jesse Weaver [Tue, 5 Jan 2016 20:37:39 +0000 (13:37 -0700)]
Bug 15354: (QA followup) remove tab character
Signed-off-by: Jesse Weaver <jweaver@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jesse Weaver <jweaver@bywatersolutions.com>
Jonathan Druart [Mon, 4 Jan 2016 10:02:06 +0000 (10:02 +0000)]
Bug 15354: Sort itemtypes by translated description everywhere on circ rules admin page
It's better to cmp on lc.
Signed-off-by: Jesse Weaver <jweaver@bywatersolutions.com>
Passes QA tools. Fixes sorting of dropdown for translated itemtype
descriptions.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jesse Weaver <jweaver@bywatersolutions.com>
Jonathan Druart [Mon, 14 Dec 2015 10:14:16 +0000 (10:14 +0000)]
Bug 15354: Fix translated itemtype descriptions in circ rules
In bug 14100, the admin/smart-rules.pl needed much more love.
Indeed, the translated_description string should be used everywhere and
replaced the previous 'humanitemtype'.
Test plan:
1/ Translate some item types.
2/ Define some holds policy using these item types.
3/ Update the template strings
4/ Confirm that the "holds policy by item type" are displayed (for the
default and specific library) and sorted by translated item type descriptions.
Signed-off-by: Frédéric Demians <f.demians@tamil.fr>
Signed-off-by: Jesse Weaver <jweaver@bywatersolutions.com>
Passes QA tools.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jesse Weaver <jweaver@bywatersolutions.com>
Jonathan Druart [Wed, 13 Jan 2016 16:13:36 +0000 (16:13 +0000)]
Bug 15568: Fix display default circ rules
To reproduce:
Go on the admin circ rules page (admin/smart-rules.pl), switch the
dropdown list from specific to "all libraries".
The rules are not displayed anymore.
Test plan:
Apply this patch and confirm that the rules are now displayed correctly.
Make sure the enh introduced by bug 11625 is not broken.
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Jesse Weaver <jweaver@bywatersolutions.com>
Jonathan Druart [Wed, 13 Jan 2016 17:51:01 +0000 (17:51 +0000)]
Bug 15570: (follow-up) Bug 11944 Remove all utf8 filter from templates
Test plan:
use circ/renew.pl to renew an issue.
Without this patch, you will get an error.
Note: The error exists for 1 year now and nobody complained?? Does
someone still use this script?
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jesse Weaver <jweaver@bywatersolutions.com>
Jonathan Druart [Tue, 12 Jan 2016 15:23:33 +0000 (15:23 +0000)]
Bug 15572: Add tests for TransformHtmlToMarc
Signed-off-by: Frédéric Demians <f.demians@tamil.fr>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Jesse Weaver <jweaver@bywatersolutions.com>
projects / koha.git / log