powerpc.git
17 years agoe1000: ROUND_UP macro cleanup in drivers/net/e1000
Milind Arun Choudhary [Fri, 27 Apr 2007 20:55:29 +0000 (13:55 -0700)]
e1000: ROUND_UP macro cleanup in drivers/net/e1000

E1000_ROUNDUP macro cleanup, use ALIGN

Signed-off-by: Milind Arun Choudhary <milindchoudhary@gmail.com>
Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
17 years agoGeneric HDLC sparse annotations
Krzysztof Halasa [Fri, 27 Apr 2007 11:13:33 +0000 (13:13 +0200)]
Generic HDLC sparse annotations

Sparse annotations, including two minor bugfixes.

Signed-off-by: Krzysztof Halasa <khc@pm.waw.pl>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
17 years agoe100: Optionally use I/O mode only to access register space
Jesse Brandeburg [Thu, 26 Apr 2007 16:43:20 +0000 (09:43 -0700)]
e100: Optionally use I/O mode only to access register space

It appears that some systems still like e100 better if it uses
I/O access mode.  Setting the new parameter use_io=1 will cause
all driver instances to use io mapping to access the register
space on the e100 device.

Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
17 years agoe100: allow bad MAC address when running with invalid eeprom csum
Jesse Brandeburg [Thu, 26 Apr 2007 16:43:11 +0000 (09:43 -0700)]
e100: allow bad MAC address when running with invalid eeprom csum

Seved Torstendahl <seved.torstendahl@netinsight.net> suggested to
let the module parameter for invalid eeprom checksum control the valid
mac address test.

If this bypass happens we should print a different message,
or at least one that is correct, maybe something like below

Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
17 years agoehea: fix for dlpar support
Thomas Klein [Thu, 26 Apr 2007 09:56:43 +0000 (11:56 +0200)]
ehea: fix for dlpar support

Certain resources may only be allocated when first logical port is available,
and must be removed when last logical port has been removed.

Signed-off-by: Thomas Klein <tklein@de.ibm.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
17 years agoehea: fix for sysfs entries
Thomas Klein [Thu, 26 Apr 2007 09:56:13 +0000 (11:56 +0200)]
ehea: fix for sysfs entries

Create symbolic link from each logical port to ehea driver

Signed-off-by: Thomas Klein <tklein@de.ibm.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
17 years ago3C509: Remove unnecessary include of <linux/pm_legacy.h>
Robert P. J. Day [Thu, 26 Apr 2007 07:23:25 +0000 (00:23 -0700)]
3C509: Remove unnecessary include of <linux/pm_legacy.h>

Remove the apparently redundant include of <linux/pm_legacy.h>.

Signed-off-by: Robert P. J. Day <rpjday@mindspring.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
17 years agoNetXen: Fix for vmalloc issues
Mithlesh Thukral [Fri, 20 Apr 2007 14:57:26 +0000 (07:57 -0700)]
NetXen: Fix for vmalloc issues

NetXen: Fix vmalloc errors on seen on some X86 high end machines.

Signed-off by: Milan Bag <mbag@netxen.com>
Acked-by: Mithlesh Thukral <mithlesh@netxen.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
17 years agoNetXen: Fixes for Power PC architecture
Mithlesh Thukral [Fri, 20 Apr 2007 14:56:42 +0000 (07:56 -0700)]
NetXen: Fixes for Power PC architecture

NetXen: Fix PPC architecture specific bugs
Fixes some issues seen on Big endian machines.

Signed-off by: Milan Bag <mbag@netxen.com>
Signed-off by: Mithlesh Thukral <mithlesh@netxen.com>

Signed-off-by: Jeff Garzik <jeff@garzik.org>
17 years agoNetXen: Port swap feature for multi port cards
Mithlesh Thukral [Fri, 20 Apr 2007 14:55:26 +0000 (07:55 -0700)]
NetXen: Port swap feature for multi port cards

NetXen: Port Swap feature
This patch will allow a port numbers on the card to be swapped in
host driver. This feature is applicable to cards having more than
1 port.

Signed-off by: Milan Bag <mbag@netxen.com>
Signed-off by: Mithlesh Thukral <mithlesh@netxen.com>

Signed-off-by: Jeff Garzik <jeff@garzik.org>
17 years agoNetXen: Removal of redundant macros
Mithlesh Thukral [Fri, 20 Apr 2007 14:54:28 +0000 (07:54 -0700)]
NetXen: Removal of redundant macros

NetXen: Remove 2 redundant macro definitions from header file.

Signed-off by: Mithlesh Thukral <mithlesh@netxen.com>

Signed-off-by: Jeff Garzik <jeff@garzik.org>
17 years agoNetXen: Multi PCI support for Quad cards
Mithlesh Thukral [Fri, 20 Apr 2007 14:53:52 +0000 (07:53 -0700)]
NetXen: Multi PCI support for Quad cards

NetXen: Fix the multi PCI function for cards with more than 2 ports.
This patch fixes the working of multi PCI capable driver on cards with
more than 2 ports by adding the addresses for their rings and sizes.

Signed-off by: Mithlesh Thukral <mithlesh@netxen.com>

Signed-off-by: Jeff Garzik <jeff@garzik.org>
17 years agoNetXen: Removal of redundant argument passing
Mithlesh Thukral [Fri, 20 Apr 2007 14:53:05 +0000 (07:53 -0700)]
NetXen: Removal of redundant argument passing

NetXen: Removal of redundant function call parameters and bug fixes.
This patch will remove the redundant paramters which were being passed to
many functions since now adapter->portnum can be used.

Signed-off-by: Mithlesh Thukral <mithlesh@netxen.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
17 years agoNetXen: Use multiple PCI functions
Mithlesh Thukral [Fri, 20 Apr 2007 14:52:37 +0000 (07:52 -0700)]
NetXen: Use multiple PCI functions

NetXen: Make driver use multiple PCI functions.
This patch will make NetXen driver work with multiple PCI functions. This will
make the usage of memory resources as well as interrupts more independent
among different functions which results in better throughput. This change has
been done after the multiport support is added in firmware.

Signed-off by: Mithlesh Thukral <mithlesh@netxen.com>

Signed-off-by: Jeff Garzik <jeff@garzik.org>
17 years ago[netdrvr e100] experiment with doing RX in a similar manner to eepro100
Scott Feldman [Wed, 9 Nov 2005 07:18:52 +0000 (02:18 -0500)]
[netdrvr e100] experiment with doing RX in a similar manner to eepro100

I was going to say that eepro100's speedo_rx_link() does the same DMA
abuse as e100, but then I noticed one little detail: eepro100 sets  both
EL (end of list) and S (suspend) bits in the RFD as it chains it  to the
RFD list.  e100 was only setting the EL bit.  Hmmm, that's  interesting.
That means that if HW reads a RFD with the S-bit set,  it'll process
that RFD and then suspend the receive unit.  The  receive unit will
resume when SW clears the S-bit.  There is no need  for SW to restart
the receive unit.  Which means a lot of the receive  unit state tracking
code in the driver goes away.

So here's a patch against 2.6.14.  (Sorry for inlining it; the mailer
I'm using now will mess with the word wrap).  I can't test this on
XScale (unless someone has an e100 module for Gumstix :) .  It should
be doing exactly what eepro100 does with RFDs.  I don't believe this
change will introduce a performance hit because the S-bit and EL-bit  go
hand-in-hand meaning if we're going to suspend because of the S- bit,
we're on the last resource anyway, so we'll have to wait for SW  to
replenish.
(cherry picked from 29e79da9495261119e3b2e4e7c72507348e75976 commit)

17 years ago[PATCH] ieee80211: add missing global needed by IEEE80211_DEBUG_XXXX
Larry Finger [Tue, 17 Apr 2007 15:28:47 +0000 (10:28 -0500)]
[PATCH] ieee80211: add missing global needed by IEEE80211_DEBUG_XXXX

Using any of the IEEE80211_DEBUG_XXXX macros in any ieee80211_crypt
routine built as a module results in a missing global for
'ieee80211_debug_level'.  The fix is to export the symbol in ieee80211.

Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
17 years agomii: add kernel-doc notation
Randy Dunlap [Fri, 6 Apr 2007 18:08:24 +0000 (11:08 -0700)]
mii: add kernel-doc notation

Add kernel-doc notation to drivers/net/mii.c functions.

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
17 years agoFix sparse errors in drivers/net/ibmveth.c
Michael Ellerman [Tue, 17 Apr 2007 03:12:55 +0000 (13:12 +1000)]
Fix sparse errors in drivers/net/ibmveth.c

drivers/net/ibmveth.c:96:46: error: marked inline, but without a definition
drivers/net/ibmveth.c:96: warning: 'ibmveth_rxq_harvest_buffer' declared inline after being called
drivers/net/ibmveth.c:96: warning: previous declaration of 'ibmveth_rxq_harvest_buffer' was here

Just let the compiler decide, as it happens gcc 4.~ inlines it anyway.

drivers/net/ibmveth.c:957:71: warning: Using plain integer as NULL pointer
drivers/net/ibmveth.c:964:85: warning: Using plain integer as NULL pointer

Split the long lines as well, ugly, but < 80 columns.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
17 years agoucc_geth: version 1.1
Kim Phillips [Fri, 13 Apr 2007 06:26:36 +0000 (01:26 -0500)]
ucc_geth: version 1.1

Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
17 years agoucc_geth: fixes for ucc_geth_memclean
Nicu Ioan Petru [Fri, 13 Apr 2007 06:26:29 +0000 (01:26 -0500)]
ucc_geth: fixes for ucc_geth_memclean

The ucc_geth_memclean function can be called before the Tx BD rings, Rx
BD rings and associated socket buffers are allocated (for example if
ucc_fast_init fails). The current code doesn't check if p_tx_bd_ring[i]
is null, generating a kernel panic when trying to free the associated
socket buffers.

The function can also fail when accessing the uninitialized list_head
structures ugeth->group_hash_q and ugeth->ind_hash_q. In the current
implementation the list heads are initialized only when
maxGroupAddrInHash and maxIndAddrInHash are positive values, although I
think it's better to always initialize them.

Signed-off-by: Ionut Nicu <ionut.nicu@freescale.com>
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
17 years agoucc_geth: Implement Transmit on Demand support
Michael Reiss [Fri, 13 Apr 2007 06:26:19 +0000 (01:26 -0500)]
ucc_geth: Implement Transmit on Demand support

Transmit on Demand: Fix spelling in config option, and make it actually enable TOD.

Signed-off-by: Michael Reiss <michael.f.reiss@freescale.com>
Signed-off-by: Michael Barkowski <michael.barkowski@freescale.com>
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
17 years agoucc_geth: Fix interrupt coalescing size and alignment
Michael Barkowski [Fri, 13 Apr 2007 06:26:15 +0000 (01:26 -0500)]
ucc_geth: Fix interrupt coalescing size and alignment

The rx interrupt coalescing table alignment was "guessed" to be 4,
but should be 64. The size should be 8 * number of queues + 4.
Verified in the MPC8323E manual.

Signed-off-by: Michael Barkowski <Michael.Barkowski@freescale.com>
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
17 years agoucc_geth: NAPI-related bug fixes
Michael Reiss [Fri, 13 Apr 2007 06:26:11 +0000 (01:26 -0500)]
ucc_geth: NAPI-related bug fixes

Based partly on the gianfar driver, this patch fixes several
bugs which were causing NAPI to be completely unusable.
* An IRQ is still needed in NAPI, to kick off NAPI task,
  and for Tx processing.  Request the IRQ.
* If rx_work_limit = 0 we are not complete.
* While running Rx NAPI processing we must mask Rx events,
  including Rx busy.
* ucc_geth_rx function does not need a lock.
  Could lead to deadlock in NAPI case.
* There's no need to loop reading ucce multiple times in the ISR,
  so while adding the call to schedule NAPI which was not there,
  simplify the event processing into if-else format.
* Rx Busy now kicks off NAPI processing, while still
  being counted as an error.

Signed-off-by: Michael Reiss <michael.f.reiss@freescale.com>
Signed-off-by: Michael Barkowski <michael.barkowski@freescale.com>
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
17 years agoucc_geth: migrate ucc_geth to phylib
Kim Phillips [Fri, 13 Apr 2007 06:26:03 +0000 (01:26 -0500)]
ucc_geth: migrate ucc_geth to phylib

migrate ucc_geth to use the common phylib code.

There are several side effects from doing this:

o deprecate 'interface' property specification present
  in some old device tree source files in
  favour of a split 'max-speed' and 'interface-type'
  description to appropriately match definitions
  in include/linux/phy.h.  Note that 'interface' property
  is still honoured if max-speed or interface-type
  are not present (backward compatible).
o compile-time CONFIG_UGETH_HAS_GIGA is eliminated
  in favour of probe time speed derivation logic.
o adjust_link streamlined to only operate on maccfg2
  and upsmr.r10m, instead of reapplying static initial
  values related to the interface-type.
o Addition of UEC MDIO of_platform driver requires
  platform code add 'mdio' type to id list
  prior to calling of_platform_bus_probe (separate patch).
o ucc_struct_init introduced to reduce ucc_geth_startup
  complexity.

Signed-off-by: Li Yang <leoli@freescale.com>
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
17 years agophylib: add RGMII-ID interface mode definition
Kim Phillips [Fri, 13 Apr 2007 06:25:57 +0000 (01:25 -0500)]
phylib: add RGMII-ID interface mode definition

The RGMII spec allows compliance for devices that implement an internal
delay on TXC or RXC inside the transmitter.  This patch adds an RGMII_ID
definition to support RGMII-ID devices in the phylib.

Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
17 years ago[PATCH] ieee80211-crypt: Make some TKIP and CCMP error logging conditional
Larry Finger [Mon, 9 Apr 2007 16:24:41 +0000 (11:24 -0500)]
[PATCH] ieee80211-crypt: Make some TKIP and CCMP error logging conditional

There are messages arising from ieee80211_crypt that spam the logs
of casual users. These are changed to be logged only if the user
specifically requests the IEEE80211_DEBUG_DROP messages. In either
case, the error/drop count is incremented.

Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
17 years ago[PATCH] zd1211rw: Add ID for ZyXEL AG-220
Daniel Drake [Sat, 7 Apr 2007 15:00:43 +0000 (16:00 +0100)]
[PATCH] zd1211rw: Add ID for ZyXEL AG-220

Tested by Christoph Sager and Tomas Klas

zd1211b chip 0586:3412 v4810 high 00-13-49 AL7230B_RF pa0 g----

Signed-off-by: Daniel Drake <dsd@gentoo.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
17 years ago[PATCH] zd1211rw: Add AL7230B RF support for ZD1211B
Daniel Drake [Sat, 7 Apr 2007 15:00:30 +0000 (16:00 +0100)]
[PATCH] zd1211rw: Add AL7230B RF support for ZD1211B

This patch adds support for some new ZD1211B devices which ship with
the AL7230B RF.

Signed-off-by: Daniel Drake <dsd@gentoo.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
17 years ago[PATCH] zd1211rw: rework band edge patching
Daniel Drake [Sat, 7 Apr 2007 15:00:15 +0000 (16:00 +0100)]
[PATCH] zd1211rw: rework band edge patching

This change allows RF drivers to provide their own 6M band edge patching
implementation, while providing a generic implementation shared by most
currently supported RF's.

The upcoming ZD1211B/AL7230B code will use this to define its own
patching function, which is different from the other RF configurations.

Signed-off-by: Daniel Drake <dsd@gentoo.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
17 years ago[PATCH] zd1211rw: Remove invalid CR write during ZD1211 phy reset
Daniel Drake [Tue, 3 Apr 2007 22:17:10 +0000 (23:17 +0100)]
[PATCH] zd1211rw: Remove invalid CR write during ZD1211 phy reset

The vendor driver only does the CR123 write for non-USB devices (which
don't exist on the consumer market)

Signed-off-by: Daniel Drake <dsd@gentoo.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
17 years ago[PATCH] hostap_cs: support ADLINK 345 CF
Marcin Juszkiewicz [Fri, 30 Mar 2007 13:34:14 +0000 (15:34 +0200)]
[PATCH] hostap_cs: support ADLINK 345 CF

Add ADLINK 345 CF card into hostap_cs

product info: "ADLINK 345 CF"
 manfid 0xd601, 0x0005

Signed-off-by: Marcin Juszkiewicz <openembedded@hrw.one.pl>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
17 years ago[PATCH] Remove comment about IEEE80211_RADIOTAP_FCS
Pavel Roskin [Wed, 28 Mar 2007 21:08:51 +0000 (17:08 -0400)]
[PATCH] Remove comment about IEEE80211_RADIOTAP_FCS

IEEE80211_RADIOTAP_FCS is obsolete and should not be used.  It's no
longer defined.  Remove it from the comment too.

Signed-off-by: Pavel Roskin <proski@gnu.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
17 years ago[PATCH] bcm43xx: Change initialization for 2050 radios
Larry Finger [Wed, 28 Mar 2007 16:07:49 +0000 (11:07 -0500)]
[PATCH] bcm43xx: Change initialization for 2050 radios

This patch implements the changes in the specifications for
2050radio_init that were recently posted.

Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
17 years agomake drivers/net/qla3xxx.c:PHY_DEVICES[] static
Adrian Bunk [Sat, 31 Mar 2007 20:55:40 +0000 (22:55 +0200)]
make drivers/net/qla3xxx.c:PHY_DEVICES[] static

On Fri, Mar 30, 2007 at 01:05:59AM -0700, Andrew Morton wrote:
>...
> Changes since 2.6.21-rc5-mm2:
>...
>  git-netdev-all.patch
>...
>  git trees
>...

This patch makes the needlessly global PHY_DEVICES[] static.

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
17 years agoS2io: Change of driver maintainers
Ramkrishna Vepa [Sat, 31 Mar 2007 01:42:27 +0000 (18:42 -0700)]
S2io: Change of driver maintainers

- Changed the maintainers for the S2io driver.

Signed-off-by: Ramkrishna Vepa <ram.vepa@neterion.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
17 years agoPatch:replace with time_after in drivers/net/eexpress.c
Shani [Wed, 28 Mar 2007 05:14:31 +0000 (10:44 +0530)]
Patch:replace with time_after in drivers/net/eexpress.c

Replacing with time_after in drivers/net/eexpress.c
Applies and compiles clean on latest tree.Not tested.

Signed-off-by: Shani Moideen <shani.moideen@wipro.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
17 years agoehea: removing unused functionality
Jan-Bernd Themann [Fri, 23 Mar 2007 16:18:53 +0000 (17:18 +0100)]
ehea: removing unused functionality

This patch includes:
- removal of unused fields in structs
- ethtool statistics cleanup
- removes unsed functionality from send path

Signed-off-by: Jan-Bernd Themann <themann@de.ibm.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
17 years agomv643xx_eth: make eth_port_uc_addr_{get,set}() calls symmetric
Gabriel Paubert [Fri, 23 Mar 2007 19:07:26 +0000 (12:07 -0700)]
mv643xx_eth: make eth_port_uc_addr_{get,set}() calls symmetric

There is no good reason for the asymmetry in the parameters of
eth_port_uc_addr_get() and eth_port_uc_addr_set().  Make them
symmetric.  Remove some gratuitous block comments while we're here.

Signed-off-by: Gabriel Paubert <paubert@iram.es>
Signed-off-by: Dale Farnsworth <dale@farnsworth.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
17 years agoqla3xxx: Bumping driver version number to v2.03.00-k4
Ron Mercer [Mon, 26 Mar 2007 20:43:03 +0000 (13:43 -0700)]
qla3xxx: Bumping driver version number to v2.03.00-k4

Signed-off-by: Ron Mercer <ron.mercer@qlogic.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
17 years agoqla3xxx: Adding support for the Agere PHY (ET1011C)
Ron Mercer [Mon, 26 Mar 2007 19:43:52 +0000 (12:43 -0700)]
qla3xxx: Adding support for the Agere PHY (ET1011C)

This PHY support patch was written by Benjamin Li.
Signed-off-by: Benjamin Li <benjamin.li@qlogic.com>
Signed-off-by: Ron Mercer <ron.mercer@qlogic.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
17 years agoqla3xxx: Add ethtool get_pauseparam for improved bonding support.
Ron Mercer [Mon, 26 Mar 2007 20:43:01 +0000 (13:43 -0700)]
qla3xxx: Add ethtool get_pauseparam for improved bonding support.

Signed-off-by: Ron Mercer <ron.mercer@qlogic.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
17 years agoremove unused header file: drivers/net/skfp/h/lnkstat.h
Robert P. J. Day [Tue, 27 Mar 2007 05:47:24 +0000 (21:47 -0800)]
remove unused header file: drivers/net/skfp/h/lnkstat.h

Signed-off-by: Robert P. J. Day <rpjday@mindspring.com>
Cc: Jeff Garzik <jeff@garzik.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
17 years agobaycom_ser_fdx: also allow i/o ports >= 0x1000 and enhanced failure logging
Folkert van Heusden [Tue, 27 Mar 2007 05:47:23 +0000 (21:47 -0800)]
baycom_ser_fdx: also allow i/o ports >= 0x1000 and enhanced failure logging

The baycom_ser_fdx driver did not allow i/o ports >= 0x1000.  Now that
there are pci cards (with rs232 ports) which use for example 0xb800 this
limit should not exists.

Also, for non kernel coders find the cause of problems was challenging so I
added extra logging.

Signed-off-by: Folkert van Heusden <folkert@vanheusden.com>
Cc: Jeff Garzik <jeff@garzik.org>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
17 years agostrlcpy is smart enough
Jean Delvare [Tue, 27 Mar 2007 05:47:22 +0000 (21:47 -0800)]
strlcpy is smart enough

strlcpy already accounts for the trailing zero in its length
computation, so there is no need to substract one to the buffer size.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: Jan-Bernd Themann <themann@de.ibm.com>
Cc: Thomas Klein <osstklei@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
17 years ago[PATCH] zd1211rw: Add another ID for Linksys WUSBF54G
Daniel Drake [Mon, 26 Mar 2007 00:00:12 +0000 (01:00 +0100)]
[PATCH] zd1211rw: Add another ID for Linksys WUSBF54G

Tested by TiCPU on irc

zd1211 chip 13b1:001e v4802 high 00-14-bf AL2230_RF pa0 g---

Signed-off-by: Daniel Drake <dsd@gentoo.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
17 years ago[PATCH] zd1211rw: Don't handle broken frames in monitor mode
Daniel Drake [Sun, 25 Mar 2007 23:59:47 +0000 (00:59 +0100)]
[PATCH] zd1211rw: Don't handle broken frames in monitor mode

Using monitor mode, Johannes Berg observed out that lots of corrupted
and otherwise invalid frames were being passed to the host.

When in monitor mode we were disabling the hardware filtering here, but
this is not how monitor mode should work.

Signed-off-by: Daniel Drake <dsd@gentoo.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
17 years ago[PATCH] zd1211rw: Mark some data const
Daniel Drake [Sun, 25 Mar 2007 23:59:18 +0000 (00:59 +0100)]
[PATCH] zd1211rw: Mark some data const

This is a backport of Helge Deller's recent patch for wireless-dev.git

Signed-off-by: Daniel Drake <dsd@gentoo.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
17 years ago[PATCH] Update my email address from jkmaline@cc.hut.fi to j@w1.fi
Jouni Malinen [Sun, 25 Mar 2007 00:15:30 +0000 (17:15 -0700)]
[PATCH] Update my email address from jkmaline@cc.hut.fi to j@w1.fi

After 13 years of use, it looks like my email address is finally going
to disappear. While this is likely to drop the amount of incoming spam
greatly ;-), it may also affect more appropriate messages, so let's
update my email address in various places. In addition, Host AP mailing
list is subscribers-only and linux-wireless can also be used for
discussing issues related to this driver which is now shown in
MAINTAINERS.

Signed-off-by: Jouni Malinen <j@w1.fi>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
17 years agoehea: code cleanup
Jan-Bernd Themann [Thu, 22 Mar 2007 16:50:24 +0000 (17:50 +0100)]
ehea: code cleanup

This patch includes:

- code cleanup related to resource management
- extended error data gathering for resource management
- removing trailing whitespaces

Signed-off-by: Jan-Bernd Themann <themann@de.ibm.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
17 years agoehea: fix for dynamic lpar support
Jan-Bernd Themann [Thu, 22 Mar 2007 16:49:42 +0000 (17:49 +0100)]
ehea: fix for dynamic lpar support

The patch fixes bugs related to the probe / remove adapter
functionality (handling of OFDT nodes)

Signed-off-by: Jan-Bernd Themann <themann@de.ibm.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
17 years agoNetpoll support for Sibyte MAC
Deepak Saxena [Mon, 19 Mar 2007 22:43:11 +0000 (15:43 -0700)]
Netpoll support for Sibyte MAC

NETPOLL support for Sibyte MAC

Signed-off-by: Manish Lachwani <mlachwani@mvista.com>
Signed-off-by: Deepak Saxena <dsaxena@mvista.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
17 years agoS2io: Remove unused variables
Ramkrishna Vepa [Sat, 10 Mar 2007 02:28:32 +0000 (18:28 -0800)]
S2io: Remove unused variables

- Remove unused variables from s2io_nic structure

- Changed the memory failure printk messages to print only in debug mode

- Updated the copyright messages

(Resending; due to patch being corrupted)

Signed-off-by: Santosh Rastapur <santosh.rastapur@neterion.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
17 years agoMIPSnet: Modernize use platform_device API.
Ralf Baechle [Sun, 18 Mar 2007 23:21:22 +0000 (23:21 +0000)]
MIPSnet: Modernize use platform_device API.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
17 years agoskge: version 1.11
Stephen Hemminger [Fri, 16 Mar 2007 21:01:32 +0000 (14:01 -0700)]
skge: version 1.11

New version to track changes.

Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
17 years agoskge: rearrange fields
Stephen Hemminger [Fri, 16 Mar 2007 21:01:31 +0000 (14:01 -0700)]
skge: rearrange fields

Do some minor rearrangement of data structures to try and optimize
cache usage.

Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
17 years agoskge: transmit locking improvements
Stephen Hemminger [Fri, 16 Mar 2007 21:01:30 +0000 (14:01 -0700)]
skge: transmit locking improvements

Don't need to lock when processing transmit complete unless queue fills.
Modeled after tg3.

Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
17 years agoskge: ignore unused error interrupts
Stephen Hemminger [Fri, 16 Mar 2007 21:01:29 +0000 (14:01 -0700)]
skge: ignore unused error interrupts

The following hardware error bits only show up on Genesis chipset
and are handled elsewhere, so they can be masked off.

Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
17 years ago[PATCH] sparse-annotate radiotap header
Pavel Roskin [Sun, 11 Mar 2007 03:54:22 +0000 (22:54 -0500)]
[PATCH] sparse-annotate radiotap header

Document that all fields must be little endian.  Use annotated types
even in the comments.  Consistently use shorter type names (u8, s8).
Realign the comments.

Signed-off-by: Pavel Roskin <proski@gnu.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
17 years ago[PATCH] libertas: use standard kernel macros
Tony Breeds [Fri, 9 Mar 2007 02:11:46 +0000 (13:11 +1100)]
[PATCH] libertas: use standard kernel macros

Cleanup drivers/net/wireless/libertas/debugfs.c to use standard kernel
macros and functions.

Signed-off-by: Tony Breeds <tony@bakeyournoodle.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
17 years ago[PATCH] airo: Make /sys/bus/pci/drivers/airo/{,un}bind work
Michal Schmidt [Fri, 16 Mar 2007 11:44:40 +0000 (12:44 +0100)]
[PATCH] airo: Make /sys/bus/pci/drivers/airo/{,un}bind work

The way airo.c keeps track of all its devices is complicated and buggy
as well (del_airo_dev forgets to free the memory add_airo_dev allocates).
It's cleaner to use the standard list primitives.
While we're at it, it's not necessary to put PCI cards in the list, because
the kernel already keeps track of them. We can take advantage of it and
use the .remove callback as it was meant to be.
This makes /sys/bus/pci/drivers/airo/{,un}bind work.

Signed-off-by: Michal Schmidt <mschmidt@redhat.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
17 years ago[PATCH] airo: Don't check for NULL before kfree()
Michal Schmidt [Fri, 16 Mar 2007 11:40:00 +0000 (12:40 +0100)]
[PATCH] airo: Don't check for NULL before kfree()

It's unnecessary to check for NULL before calling kfree().

Signed-off-by: Michal Schmidt <mschmidt@redhat.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
17 years ago[PATCH] bcm43xx:Eliminate some 'G Mode Enable' magic numbers
Larry Finger [Wed, 14 Mar 2007 20:06:22 +0000 (15:06 -0500)]
[PATCH] bcm43xx:Eliminate some 'G Mode Enable' magic numbers

In code manipulating the TM State Low register of 802.11 cores, two
different magic numbers are used to reference the 'G Mode Enable' bit.
One of these, 0x20000000, is clear, but the other, (0x800 << 18), is not.
This patch replaces both types with a defined constant. In addition, two
bits in the TM State High registers are given definitions to help in
following the code.

Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
17 years ago[PATCH] zd1211rw: More device IDs
Daniel Drake [Sun, 11 Mar 2007 19:54:39 +0000 (19:54 +0000)]
[PATCH] zd1211rw: More device IDs

ASUS A9Rp
Tested by Serge
zd1211b chip 0b05:171b v4802 high 00-17-31 AL2230_RF pa0 g--

ZyXEL G-202
Tested by Marcus D. Hanwell
zd1211b chip 0586:3410 v4810 high 00-13-49 AL2230_RF pa0 g---

US Robotics USR805423
Tested by Pascal S. de Kloe
FCC ID: RAXWN4501H
zd1211b chip 0baf:0121 v4810 high 00-14-c1 AL2230_RF pa0 g--N
Julien Pinon reports this also comes in AL2230S form

Signed-off-by: Daniel Drake <dsd@gentoo.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
17 years ago[PATCH] zd1211rw: Add AL2230S RF support
Daniel Drake [Sun, 11 Mar 2007 19:54:28 +0000 (19:54 +0000)]
[PATCH] zd1211rw: Add AL2230S RF support

ZD1211 appears to be back in production: a number of new devices have
been appearing! Some of them are using new radios.

This patch adds support for the next generation AL2230 RF chip which has
been spotted in a few new devices.

Signed-off-by: Daniel Drake <dsd@gentoo.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
17 years ago[PATCH] zd1211rw: Use compare_ether_addr()
Daniel Drake [Sun, 11 Mar 2007 19:53:40 +0000 (19:53 +0000)]
[PATCH] zd1211rw: Use compare_ether_addr()

Suggested by Maxime Austruy, based on mac80211 changes from Stephen
Hemminger

Signed-off-by: Daniel Drake <dsd@gentoo.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
17 years agoRev tulip version
Valerie Henson [Mon, 12 Mar 2007 09:31:34 +0000 (02:31 -0700)]
Rev tulip version

Rev tulip version... things have changed since 2002!

Signed-off-by: Valerie Henson <val_henson@linux.intel.com>
Cc: Jeff Garzik <jeff@garzik.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
17 years agoFix tulip SytemError typo
Valerie Henson [Mon, 12 Mar 2007 09:31:33 +0000 (02:31 -0700)]
Fix tulip SytemError typo

Fix an annoying typo - SytemError -> SystemError

Signed-off-by: Valerie Henson <val_henson@linux.intel.com>
Cc: Jeff Garzik <jeff@garzik.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
17 years agoTULIP: Natsemi dp83840a PHY fix
Thibaut VARENE [Mon, 12 Mar 2007 09:31:30 +0000 (02:31 -0700)]
TULIP: Natsemi dp83840a PHY fix

Fix a problem with Tulip 21142 HP branded PCI cards (PN#: B5509-66001),
which feature a NatSemi DP83840A PHY.

Without that patch, it is impossible to properly initialize the card's PHY,
and it's thus impossible to monitor/configure it.

[VAL: I'm happy with the 1.5 ms max delay; it doesn't seem excessive.]

Signed-off-by: Thibaut VARENE <varenet@parisc-linux.org>
Cc: Jeff Garzik <jgarzik@pobox.com>
Acked-by: Grant Grundler <grundler@parisc-linux.org>
Signed-off-by: Valerie Henson <val_henson@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
17 years agoTULIP: Fix for 64-bit MIPS
Valerie Henson [Mon, 12 Mar 2007 09:31:29 +0000 (02:31 -0700)]
TULIP: Fix for 64-bit MIPS

From: Jim Gifford <maillist@jg555.com>, Grant Grundler <grundler@parisc-linux.org>, Peter Horton <pdh@colonel-panic.org>

With Grant's help I was able to get the tulip driver to work with 64 bit
MIPS.

[VAL: I'm happy with the 1.5 ms max delay; it doesn't seem excessive.]

Signed-off-by: Valerie Henson <val_henson@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Cc: Jeff Garzik <jgarzik@pobox.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
17 years agotc35815: Zap changelog from source code
Atsushi Nemoto [Wed, 14 Mar 2007 15:10:37 +0000 (00:10 +0900)]
tc35815: Zap changelog from source code

Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
17 years agotc35815: Fix an usage of streaming DMA API.
Atsushi Nemoto [Tue, 13 Mar 2007 16:02:20 +0000 (01:02 +0900)]
tc35815: Fix an usage of streaming DMA API.

The tc35815 driver lacks a call to pci_dma_sync_single_for_device() on
receiving.  Recent fix of MIPS dma_sync_single_for_cpu() reveal this
bug.

Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
17 years agopcnet32: change to use netdev_priv
Don Fry [Tue, 6 Mar 2007 18:55:00 +0000 (10:55 -0800)]
pcnet32: change to use netdev_priv

use netdev_priv() instead of dev->priv

Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Don Fry <pcnet32@verizon.net>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
17 years agopcnet32: only allocate init_block dma consistent
Don Fry [Tue, 6 Mar 2007 18:45:23 +0000 (10:45 -0800)]
pcnet32: only allocate init_block dma consistent

The patch below moves the init_block out of the private struct and
only allocates init block with pci_alloc_consistent.

This has two effects:

1. Performance increase for non cache coherent machines, because the
   CPU only data in the private struct are now cached

2. locks are working now for platforms, which need to have locks
   in cached memory

Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Acked-by: Don Fry <pcnet32@verizon.net>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
17 years agoixgb: Use ARRAY_SIZE macro when appropriate.
Ahmed S. Darwish [Tue, 6 Mar 2007 19:08:28 +0000 (11:08 -0800)]
ixgb: Use ARRAY_SIZE macro when appropriate.

Signed-off-by: Ahmed S. Darwish <darwish.07@gmail.com>
Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
17 years agoS2IO: Save/Restore unused buffer mappings in 2/3 buffer mode
Ramkrishna Vepa [Wed, 7 Mar 2007 01:01:00 +0000 (17:01 -0800)]
S2IO: Save/Restore unused buffer mappings in 2/3 buffer mode

- Save/Restore unused buffer mappings in 2/3 buffer mode to avoid
frequent mapping

- Save/Restore adapter reset count during adapter reset

  (Resending; forgot to cc netdev)

Signed-off-by: Santosh Rastapur <santosh.rastapur@neterion.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
17 years agoe1000: list e1000-devel mailing list in MAINTAINERS
Auke Kok [Tue, 6 Mar 2007 16:58:06 +0000 (08:58 -0800)]
e1000: list e1000-devel mailing list in MAINTAINERS

Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
17 years agoe1000: Use kcalloc()
Yan Burman [Tue, 6 Mar 2007 16:58:04 +0000 (08:58 -0800)]
e1000: Use kcalloc()

Replace kmalloc+memsetout the driver. Slightly modified by Auke Kok.

Signed-off-by: Yan Burman <burman.yan@gmail.com>
Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
17 years agoe1000: Use ARRAY_SIZE macro when appropriate
Ahmed S. Darwish [Tue, 6 Mar 2007 16:58:02 +0000 (08:58 -0800)]
e1000: Use ARRAY_SIZE macro when appropriate

A patch to use ARRAY_SIZE macro already defined in kernel.h.

Signed-off-by: Ahmed S. Darwish <darwish.07@gmail.com>
Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
17 years agonetwork: add the missing phy_device speed information to phy_mii_ioctl
Shan Lu [Tue, 6 Mar 2007 10:42:03 +0000 (02:42 -0800)]
network: add the missing phy_device speed information to phy_mii_ioctl

Function `phy_mii_ioctl' returns physical device's information based on
user requests.  When requested to return the basic mode control register
information (BMCR), the original implementation only returns the physical
device's duplex information and forgets to return speed information, which
should not be because BMCR register is used to hold both duplex and speed
information.

The patch checks the BMCR value against speed-related flags and fills the
return structure's speed field accordingly.

Signed-off-by: Shan <shanlu@cs.uiuc.edu>
Cc: Jeff Garzik <jeff@garzik.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
17 years agosk98lin: handle pci_enable_device() return value in skge_resume()
Dmitriy Monakhov [Tue, 6 Mar 2007 10:42:01 +0000 (02:42 -0800)]
sk98lin: handle pci_enable_device() return value in skge_resume()

Signed-off-by: Monakhov Dmitriy <dmonakhov@openvz.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
17 years agodmfe: add support for Wake on lan
Maxim Levitsky [Tue, 6 Mar 2007 10:41:54 +0000 (02:41 -0800)]
dmfe: add support for Wake on lan

Add support for WOL on Magic Packet and on link change

Signed-off-by: Maxim Levitsky <maximlevitsky@gmail.com>
Cc: Valerie Henson <val_henson@linux.intel.com>
Cc: Jeff Garzik <jeff@garzik.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
17 years agodmfe: add support for suspend/resume
Maxim Levitsky [Tue, 6 Mar 2007 10:41:53 +0000 (02:41 -0800)]
dmfe: add support for suspend/resume

This adds support for suspend resume

[akpm@linux-foundation.org: fix CONFIG_PM=n, coding style]
Signed-off-by: Maxim Levitsky <maximlevitsky@gmail.com>
Cc: Valerie Henson <val_henson@linux.intel.com>
Cc: Jeff Garzik <jeff@garzik.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
17 years agophy layer: add kernel-doc + DocBook
Randy Dunlap [Tue, 6 Mar 2007 10:41:48 +0000 (02:41 -0800)]
phy layer: add kernel-doc + DocBook

Convert function documentation in drivers/net/phy/ to kernel-doc
and add it to DocBook.

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
17 years agouser of the jiffies rounding code: e1000
Arjan van de Ven [Tue, 6 Mar 2007 10:41:48 +0000 (02:41 -0800)]
user of the jiffies rounding code: e1000

Use the round_jiffies() function in e1000.

These timers all were of the "about once a second" or "about once every X
seconds" variety and several showed up in the "what wakes the cpu up" profiles
that the tickless patches provide.  Some timers are highly dynamic based on
network load; but even on low activity systems they still show up so the
rounding is done only in cases of low activity, allowing higher frequency
timers in the high activity case.

The various hardware watchdogs are an obvious case; they run every 2 seconds
but aren't otherwise specific of exactly when they need to run.

Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Acked-by: Auke Kok <auke-jan.h.kok@intel.com>
Cc: Jeff Garzik <jeff@garzik.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
17 years agotc35815 driver update (take 2)
Atsushi Nemoto [Sat, 3 Mar 2007 14:54:59 +0000 (23:54 +0900)]
tc35815 driver update (take 2)

Current tc35815 driver is very obsolete and less maintained for a long
time.  Replace it with a new driver based on one from CELF patch
archive.

Major advantages of CELF version (version 1.23, for kernel 2.6.10) are:

* Independent of JMR3927.
  (Actually independent of MIPS, but AFAIK the chip is used only on
   MIPS platforms)
* TX4938 support.
* 64-bit proof.
* Asynchronous and on-demand auto negotiation.
* High performance on non-coherent architecture.
* ethtool support.
* Many bugfixes and cleanups.

And improvoments since version 1.23 are:

* TX4939 support.
* NETPOLL support.
* NAPI support. (disabled by default)
* Reduce memcpy on receiving.
* PM support.
* Many cleanups and bugfixes.

Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
17 years agodrivers/net/qla3xxx.c: make 2 functions static
Adrian Bunk [Mon, 5 Mar 2007 01:49:27 +0000 (02:49 +0100)]
drivers/net/qla3xxx.c: make 2 functions static

This patch makes two needlessly global functions static.

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
17 years agomake drivers/net/s2io.c:vlan_strip_flag static
Adrian Bunk [Mon, 5 Mar 2007 01:49:25 +0000 (02:49 +0100)]
make drivers/net/s2io.c:vlan_strip_flag static

This patch makes the needlessly global vlan_strip_flag static.

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
17 years agoAdd support for Seeq 8003 on Challenge S Mezz board.
Ladislav Michl [Wed, 28 Feb 2007 01:18:35 +0000 (01:18 +0000)]
Add support for Seeq 8003 on Challenge S Mezz board.

Thanks to Jö Fahlke for donating hardware.

Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
Forward porting of Ladis' 2.4 patch.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
17 years agoehea: NAPI multi queue TX/RX path for SMP
Jan-Bernd Themann [Wed, 28 Feb 2007 17:34:10 +0000 (18:34 +0100)]
ehea: NAPI multi queue TX/RX path for SMP

This patch provides a functionality that allows parallel
RX processing on multiple RX queues by using dummy netdevices.

Signed-off-by: Jan-Bernd Themann <themann@de.ibm.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
17 years agoehea: dynamic add / remove port
Jan-Bernd Themann [Wed, 28 Feb 2007 17:34:02 +0000 (18:34 +0100)]
ehea: dynamic add / remove port

This patch introduces functionality to dynamically add / remove
ehea ports via an userspace DLPAR tool. It creates a subnode for
each logical port in the sysfs.

Signed-off-by: Jan-Bernd Themann <themann@de.ibm.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
17 years agochelsio: use const for virtual functions
Stephen Hemminger [Tue, 20 Feb 2007 23:58:02 +0000 (15:58 -0800)]
chelsio: use const for virtual functions

There are several uses of _ops structure in this driver that
can be converted to const.

Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
17 years agochelsio: use C99 style initialization
Stephen Hemminger [Tue, 20 Feb 2007 23:58:01 +0000 (15:58 -0800)]
chelsio: use C99 style initialization

Convert some initialized structures to C99 style.

Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
17 years agochelsio: remove unused code for 1G boards
Stephen Hemminger [Tue, 20 Feb 2007 23:58:00 +0000 (15:58 -0800)]
chelsio: remove unused code for 1G boards

Some code for Chelsio 1G boards was put in the driver
based on the vendor version (minus TOE). Well some of those board
versions are only supported with TOE on the vendor driver, so additional
dead code was added.

Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
17 years ago[PATCH] bcm43xx: do not rebuild when kernel version changes
Sam Ravnborg [Sun, 4 Mar 2007 05:55:08 +0000 (23:55 -0600)]
[PATCH] bcm43xx: do not rebuild when kernel version changes

In bcm43xx_ethtool, UTS_RELEASE is used. Replacing this with utsname()->release
avoids rebuilding this module each time the kernel version changes.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
17 years ago[PATCH] hostap: Add D-Link DWL-650 Rev. P1 product id
Jouni Malinen [Wed, 28 Feb 2007 03:46:46 +0000 (19:46 -0800)]
[PATCH] hostap: Add D-Link DWL-650 Rev. P1 product id

It looks like some of the PC Card manfid/product strings were lost
when Host AP driver was converted to use PCMCIA_DEVICE_* helpers. This
patch adds back D-Link DWL-650 Rev. P1 using the same product ID
string match as the pcmcia-cs/cardmgr configuration used before.

Signed-off-by: Jouni Malinen <jkmaline@cc.hut.fi>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
17 years ago[PATCH] ipw2200: fix ieee80211_get_geo typo
Andrew Morton [Thu, 1 Mar 2007 13:19:29 +0000 (08:19 -0500)]
[PATCH] ipw2200: fix ieee80211_get_geo typo

testing much?

Cc: Zhu Yi <yi.zhu@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
17 years ago[PATCH] libertas: fix build breakage from netdev class_device -> device
John W. Linville [Tue, 27 Feb 2007 19:39:04 +0000 (14:39 -0500)]
[PATCH] libertas: fix build breakage from netdev class_device -> device

Signed-off-by: John W. Linville <linville@tuxdriver.com>
17 years ago[PATCH] wireless: remove obsolete text files
John W. Linville [Tue, 27 Feb 2007 18:41:26 +0000 (13:41 -0500)]
[PATCH] wireless: remove obsolete text files

Signed-off-by: John W. Linville <linville@tuxdriver.com>
17 years ago[PATCH] bcm43xx: Update Documentation/bcm43xx.txt
Larry Finger [Tue, 20 Feb 2007 16:33:13 +0000 (10:33 -0600)]
[PATCH] bcm43xx: Update Documentation/bcm43xx.txt

The in-kernel documentation of the bcm43xx driver is out of date.

Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
17 years ago[PATCH] hostap: use offsetof() instead of own equivalent
Pavel Roskin [Mon, 19 Feb 2007 01:44:06 +0000 (20:44 -0500)]
[PATCH] hostap: use offsetof() instead of own equivalent

The original macros result in gcc 4.2 warning about "cast from pointer
to integer of different size" on 64-bit systems.

Use of offsetof() on fields in substructures is widespread throughout
the kernel code and should work whether offsetof() is defined using
__compiler_offsetof() or a cast.

Signed-off-by: Pavel Roskin <proski@gnu.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>