From 542b1444c5639e5964f9aa99e1cb231381d8a7a4 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Sun, 17 Dec 2006 10:45:08 +0900 Subject: [PATCH] [PATCH] libata: clean up variable name usage in xlat related functions Variable names in xlat functions are quite confusing now. 'scsicmd' is used for CDB while qc->scsicmd points to struct scsi_cmnd while 'cmd' is used for struct scsi_cmnd. This patch cleans up variable names in xlat functions such that 'scmd' is used for struct scsi_cmnd and 'cdb' for CDB. Also, 'scmd' local variable is added if qc->scsicmd is used multiple times. Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- drivers/ata/libata-scsi.c | 217 ++++++++++++++++++-------------------- 1 file changed, 105 insertions(+), 112 deletions(-) diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c index a4790be41d..1e42cde05f 100644 --- a/drivers/ata/libata-scsi.c +++ b/drivers/ata/libata-scsi.c @@ -51,7 +51,7 @@ #define SECTOR_SIZE 512 -typedef unsigned int (*ata_xlat_func_t)(struct ata_queued_cmd *qc, const u8 *scsicmd); +typedef unsigned int (*ata_xlat_func_t)(struct ata_queued_cmd *qc, const u8 *cdb); static struct ata_device * __ata_scsi_find_dev(struct ata_port *ap, const struct scsi_device *scsidev); @@ -935,7 +935,7 @@ int ata_scsi_change_queue_depth(struct scsi_device *sdev, int queue_depth) /** * ata_scsi_start_stop_xlat - Translate SCSI START STOP UNIT command * @qc: Storage for translated ATA taskfile - * @scsicmd: SCSI command to translate + * @cdb: SCSI command to translate * * Sets up an ATA taskfile to issue STANDBY (to stop) or READ VERIFY * (to start). Perhaps these commands should be preceded by @@ -948,22 +948,22 @@ int ata_scsi_change_queue_depth(struct scsi_device *sdev, int queue_depth) * RETURNS: * Zero on success, non-zero on error. */ - static unsigned int ata_scsi_start_stop_xlat(struct ata_queued_cmd *qc, - const u8 *scsicmd) + const u8 *cdb) { + struct scsi_cmnd *scmd = qc->scsicmd; struct ata_taskfile *tf = &qc->tf; tf->flags |= ATA_TFLAG_DEVICE | ATA_TFLAG_ISADDR; tf->protocol = ATA_PROT_NODATA; - if (scsicmd[1] & 0x1) { + if (cdb[1] & 0x1) { ; /* ignore IMMED bit, violates sat-r05 */ } - if (scsicmd[4] & 0x2) + if (cdb[4] & 0x2) goto invalid_fld; /* LOEJ bit set not supported */ - if (((scsicmd[4] >> 4) & 0xf) != 0) + if (((cdb[4] >> 4) & 0xf) != 0) goto invalid_fld; /* power conditions not supported */ - if (scsicmd[4] & 0x1) { + if (cdb[4] & 0x1) { tf->nsect = 1; /* 1 sector, lba=0 */ if (qc->dev->flags & ATA_DFLAG_LBA) { @@ -996,7 +996,7 @@ static unsigned int ata_scsi_start_stop_xlat(struct ata_queued_cmd *qc, return 0; invalid_fld: - ata_scsi_set_sense(qc->scsicmd, ILLEGAL_REQUEST, 0x24, 0x0); + ata_scsi_set_sense(scmd, ILLEGAL_REQUEST, 0x24, 0x0); /* "Invalid field in cbd" */ return 1; } @@ -1005,7 +1005,7 @@ invalid_fld: /** * ata_scsi_flush_xlat - Translate SCSI SYNCHRONIZE CACHE command * @qc: Storage for translated ATA taskfile - * @scsicmd: SCSI command to translate (ignored) + * @cdb: SCSI command to translate (ignored) * * Sets up an ATA taskfile to issue FLUSH CACHE or * FLUSH CACHE EXT. @@ -1016,8 +1016,7 @@ invalid_fld: * RETURNS: * Zero on success, non-zero on error. */ - -static unsigned int ata_scsi_flush_xlat(struct ata_queued_cmd *qc, const u8 *scsicmd) +static unsigned int ata_scsi_flush_xlat(struct ata_queued_cmd *qc, const u8 *cdb) { struct ata_taskfile *tf = &qc->tf; @@ -1034,7 +1033,7 @@ static unsigned int ata_scsi_flush_xlat(struct ata_queued_cmd *qc, const u8 *scs /** * scsi_6_lba_len - Get LBA and transfer length - * @scsicmd: SCSI command to translate + * @cdb: SCSI command to translate * * Calculate LBA and transfer length for 6-byte commands. * @@ -1042,18 +1041,17 @@ static unsigned int ata_scsi_flush_xlat(struct ata_queued_cmd *qc, const u8 *scs * @plba: the LBA * @plen: the transfer length */ - -static void scsi_6_lba_len(const u8 *scsicmd, u64 *plba, u32 *plen) +static void scsi_6_lba_len(const u8 *cdb, u64 *plba, u32 *plen) { u64 lba = 0; u32 len = 0; VPRINTK("six-byte command\n"); - lba |= ((u64)scsicmd[2]) << 8; - lba |= ((u64)scsicmd[3]); + lba |= ((u64)cdb[2]) << 8; + lba |= ((u64)cdb[3]); - len |= ((u32)scsicmd[4]); + len |= ((u32)cdb[4]); *plba = lba; *plen = len; @@ -1061,7 +1059,7 @@ static void scsi_6_lba_len(const u8 *scsicmd, u64 *plba, u32 *plen) /** * scsi_10_lba_len - Get LBA and transfer length - * @scsicmd: SCSI command to translate + * @cdb: SCSI command to translate * * Calculate LBA and transfer length for 10-byte commands. * @@ -1069,21 +1067,20 @@ static void scsi_6_lba_len(const u8 *scsicmd, u64 *plba, u32 *plen) * @plba: the LBA * @plen: the transfer length */ - -static void scsi_10_lba_len(const u8 *scsicmd, u64 *plba, u32 *plen) +static void scsi_10_lba_len(const u8 *cdb, u64 *plba, u32 *plen) { u64 lba = 0; u32 len = 0; VPRINTK("ten-byte command\n"); - lba |= ((u64)scsicmd[2]) << 24; - lba |= ((u64)scsicmd[3]) << 16; - lba |= ((u64)scsicmd[4]) << 8; - lba |= ((u64)scsicmd[5]); + lba |= ((u64)cdb[2]) << 24; + lba |= ((u64)cdb[3]) << 16; + lba |= ((u64)cdb[4]) << 8; + lba |= ((u64)cdb[5]); - len |= ((u32)scsicmd[7]) << 8; - len |= ((u32)scsicmd[8]); + len |= ((u32)cdb[7]) << 8; + len |= ((u32)cdb[8]); *plba = lba; *plen = len; @@ -1091,7 +1088,7 @@ static void scsi_10_lba_len(const u8 *scsicmd, u64 *plba, u32 *plen) /** * scsi_16_lba_len - Get LBA and transfer length - * @scsicmd: SCSI command to translate + * @cdb: SCSI command to translate * * Calculate LBA and transfer length for 16-byte commands. * @@ -1099,27 +1096,26 @@ static void scsi_10_lba_len(const u8 *scsicmd, u64 *plba, u32 *plen) * @plba: the LBA * @plen: the transfer length */ - -static void scsi_16_lba_len(const u8 *scsicmd, u64 *plba, u32 *plen) +static void scsi_16_lba_len(const u8 *cdb, u64 *plba, u32 *plen) { u64 lba = 0; u32 len = 0; VPRINTK("sixteen-byte command\n"); - lba |= ((u64)scsicmd[2]) << 56; - lba |= ((u64)scsicmd[3]) << 48; - lba |= ((u64)scsicmd[4]) << 40; - lba |= ((u64)scsicmd[5]) << 32; - lba |= ((u64)scsicmd[6]) << 24; - lba |= ((u64)scsicmd[7]) << 16; - lba |= ((u64)scsicmd[8]) << 8; - lba |= ((u64)scsicmd[9]); + lba |= ((u64)cdb[2]) << 56; + lba |= ((u64)cdb[3]) << 48; + lba |= ((u64)cdb[4]) << 40; + lba |= ((u64)cdb[5]) << 32; + lba |= ((u64)cdb[6]) << 24; + lba |= ((u64)cdb[7]) << 16; + lba |= ((u64)cdb[8]) << 8; + lba |= ((u64)cdb[9]); - len |= ((u32)scsicmd[10]) << 24; - len |= ((u32)scsicmd[11]) << 16; - len |= ((u32)scsicmd[12]) << 8; - len |= ((u32)scsicmd[13]); + len |= ((u32)cdb[10]) << 24; + len |= ((u32)cdb[11]) << 16; + len |= ((u32)cdb[12]) << 8; + len |= ((u32)cdb[13]); *plba = lba; *plen = len; @@ -1128,7 +1124,7 @@ static void scsi_16_lba_len(const u8 *scsicmd, u64 *plba, u32 *plen) /** * ata_scsi_verify_xlat - Translate SCSI VERIFY command into an ATA one * @qc: Storage for translated ATA taskfile - * @scsicmd: SCSI command to translate + * @cdb: SCSI command to translate * * Converts SCSI VERIFY command to an ATA READ VERIFY command. * @@ -1138,9 +1134,9 @@ static void scsi_16_lba_len(const u8 *scsicmd, u64 *plba, u32 *plen) * RETURNS: * Zero on success, non-zero on error. */ - -static unsigned int ata_scsi_verify_xlat(struct ata_queued_cmd *qc, const u8 *scsicmd) +static unsigned int ata_scsi_verify_xlat(struct ata_queued_cmd *qc, const u8 *cdb) { + struct scsi_cmnd *scmd = qc->scsicmd; struct ata_taskfile *tf = &qc->tf; struct ata_device *dev = qc->dev; u64 dev_sectors = qc->dev->n_sectors; @@ -1150,10 +1146,10 @@ static unsigned int ata_scsi_verify_xlat(struct ata_queued_cmd *qc, const u8 *sc tf->flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE; tf->protocol = ATA_PROT_NODATA; - if (scsicmd[0] == VERIFY) - scsi_10_lba_len(scsicmd, &block, &n_block); - else if (scsicmd[0] == VERIFY_16) - scsi_16_lba_len(scsicmd, &block, &n_block); + if (cdb[0] == VERIFY) + scsi_10_lba_len(cdb, &block, &n_block); + else if (cdb[0] == VERIFY_16) + scsi_16_lba_len(cdb, &block, &n_block); else goto invalid_fld; @@ -1229,24 +1225,24 @@ static unsigned int ata_scsi_verify_xlat(struct ata_queued_cmd *qc, const u8 *sc return 0; invalid_fld: - ata_scsi_set_sense(qc->scsicmd, ILLEGAL_REQUEST, 0x24, 0x0); + ata_scsi_set_sense(scmd, ILLEGAL_REQUEST, 0x24, 0x0); /* "Invalid field in cbd" */ return 1; out_of_range: - ata_scsi_set_sense(qc->scsicmd, ILLEGAL_REQUEST, 0x21, 0x0); + ata_scsi_set_sense(scmd, ILLEGAL_REQUEST, 0x21, 0x0); /* "Logical Block Address out of range" */ return 1; nothing_to_do: - qc->scsicmd->result = SAM_STAT_GOOD; + scmd->result = SAM_STAT_GOOD; return 1; } /** * ata_scsi_rw_xlat - Translate SCSI r/w command into an ATA one * @qc: Storage for translated ATA taskfile - * @scsicmd: SCSI command to translate + * @cdb: SCSI command to translate * * Converts any of six SCSI read/write commands into the * ATA counterpart, including starting sector (LBA), @@ -1262,29 +1258,28 @@ nothing_to_do: * RETURNS: * Zero on success, non-zero on error. */ - -static unsigned int ata_scsi_rw_xlat(struct ata_queued_cmd *qc, const u8 *scsicmd) +static unsigned int ata_scsi_rw_xlat(struct ata_queued_cmd *qc, const u8 *cdb) { + struct scsi_cmnd *scmd = qc->scsicmd; unsigned int tf_flags = 0; u64 block; u32 n_block; int rc; - if (scsicmd[0] == WRITE_10 || scsicmd[0] == WRITE_6 || - scsicmd[0] == WRITE_16) + if (cdb[0] == WRITE_10 || cdb[0] == WRITE_6 || cdb[0] == WRITE_16) tf_flags |= ATA_TFLAG_WRITE; /* Calculate the SCSI LBA, transfer length and FUA. */ - switch (scsicmd[0]) { + switch (cdb[0]) { case READ_10: case WRITE_10: - scsi_10_lba_len(scsicmd, &block, &n_block); - if (unlikely(scsicmd[1] & (1 << 3))) + scsi_10_lba_len(cdb, &block, &n_block); + if (unlikely(cdb[1] & (1 << 3))) tf_flags |= ATA_TFLAG_FUA; break; case READ_6: case WRITE_6: - scsi_6_lba_len(scsicmd, &block, &n_block); + scsi_6_lba_len(cdb, &block, &n_block); /* for 6-byte r/w commands, transfer length 0 * means 256 blocks of data, not 0 block. @@ -1294,8 +1289,8 @@ static unsigned int ata_scsi_rw_xlat(struct ata_queued_cmd *qc, const u8 *scsicm break; case READ_16: case WRITE_16: - scsi_16_lba_len(scsicmd, &block, &n_block); - if (unlikely(scsicmd[1] & (1 << 3))) + scsi_16_lba_len(cdb, &block, &n_block); + if (unlikely(cdb[1] & (1 << 3))) tf_flags |= ATA_TFLAG_FUA; break; default: @@ -1326,17 +1321,17 @@ static unsigned int ata_scsi_rw_xlat(struct ata_queued_cmd *qc, const u8 *scsicm goto out_of_range; /* treat all other errors as -EINVAL, fall through */ invalid_fld: - ata_scsi_set_sense(qc->scsicmd, ILLEGAL_REQUEST, 0x24, 0x0); + ata_scsi_set_sense(scmd, ILLEGAL_REQUEST, 0x24, 0x0); /* "Invalid field in cbd" */ return 1; out_of_range: - ata_scsi_set_sense(qc->scsicmd, ILLEGAL_REQUEST, 0x21, 0x0); + ata_scsi_set_sense(scmd, ILLEGAL_REQUEST, 0x21, 0x0); /* "Logical Block Address out of range" */ return 1; nothing_to_do: - qc->scsicmd->result = SAM_STAT_GOOD; + scmd->result = SAM_STAT_GOOD; return 1; } @@ -1456,7 +1451,7 @@ static int ata_scsi_translate(struct ata_device *dev, struct scsi_cmnd *cmd, ata_xlat_func_t xlat_func) { struct ata_queued_cmd *qc; - u8 *scsicmd = cmd->cmnd; + u8 *cdb = cmd->cmnd; int is_io = xlat_func == ata_scsi_rw_xlat; VPRINTK("ENTER\n"); @@ -1488,7 +1483,7 @@ static int ata_scsi_translate(struct ata_device *dev, struct scsi_cmnd *cmd, qc->complete_fn = ata_scsi_qc_complete; - if (xlat_func(qc, scsicmd)) + if (xlat_func(qc, cdb)) goto early_finish; /* select device, send command to hardware */ @@ -2344,7 +2339,7 @@ static void atapi_qc_complete(struct ata_queued_cmd *qc) /** * atapi_xlat - Initialize PACKET taskfile * @qc: command structure to be initialized - * @scsicmd: SCSI CDB associated with this PACKET command + * @cdb: SCSI CDB associated with this PACKET command * * LOCKING: * spin_lock_irqsave(host lock) @@ -2352,25 +2347,24 @@ static void atapi_qc_complete(struct ata_queued_cmd *qc) * RETURNS: * Zero on success, non-zero on failure. */ - -static unsigned int atapi_xlat(struct ata_queued_cmd *qc, const u8 *scsicmd) +static unsigned int atapi_xlat(struct ata_queued_cmd *qc, const u8 *cdb) { - struct scsi_cmnd *cmd = qc->scsicmd; + struct scsi_cmnd *scmd = qc->scsicmd; struct ata_device *dev = qc->dev; int using_pio = (dev->flags & ATA_DFLAG_PIO); - int nodata = (cmd->sc_data_direction == DMA_NONE); + int nodata = (scmd->sc_data_direction == DMA_NONE); if (!using_pio) /* Check whether ATAPI DMA is safe */ if (ata_check_atapi_dma(qc)) using_pio = 1; - memcpy(&qc->cdb, scsicmd, dev->cdb_len); + memcpy(&qc->cdb, cdb, dev->cdb_len); qc->complete_fn = atapi_qc_complete; qc->tf.flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE; - if (cmd->sc_data_direction == DMA_TO_DEVICE) { + if (scmd->sc_data_direction == DMA_TO_DEVICE) { qc->tf.flags |= ATA_TFLAG_WRITE; DPRINTK("direction: write\n"); } @@ -2392,12 +2386,12 @@ static unsigned int atapi_xlat(struct ata_queued_cmd *qc, const u8 *scsicmd) qc->tf.protocol = ATA_PROT_ATAPI_DMA; qc->tf.feature |= ATAPI_PKT_DMA; - if (atapi_dmadir && (cmd->sc_data_direction != DMA_TO_DEVICE)) + if (atapi_dmadir && (scmd->sc_data_direction != DMA_TO_DEVICE)) /* some SATA bridges need us to indicate data xfer direction */ qc->tf.feature |= ATAPI_DMADIR; } - qc->nbytes = cmd->request_bufflen; + qc->nbytes = scmd->request_bufflen; return 0; } @@ -2517,28 +2511,27 @@ ata_scsi_map_proto(u8 byte1) /** * ata_scsi_pass_thru - convert ATA pass-thru CDB to taskfile * @qc: command structure to be initialized - * @scsicmd: SCSI command to convert + * @cdb: SCSI command to convert * * Handles either 12 or 16-byte versions of the CDB. * * RETURNS: * Zero on success, non-zero on failure. */ -static unsigned int -ata_scsi_pass_thru(struct ata_queued_cmd *qc, const u8 *scsicmd) +static unsigned int ata_scsi_pass_thru(struct ata_queued_cmd *qc, const u8 *cdb) { struct ata_taskfile *tf = &(qc->tf); - struct scsi_cmnd *cmd = qc->scsicmd; + struct scsi_cmnd *scmd = qc->scsicmd; struct ata_device *dev = qc->dev; - if ((tf->protocol = ata_scsi_map_proto(scsicmd[1])) == ATA_PROT_UNKNOWN) + if ((tf->protocol = ata_scsi_map_proto(cdb[1])) == ATA_PROT_UNKNOWN) goto invalid_fld; /* We may not issue DMA commands if no DMA mode is set */ if (tf->protocol == ATA_PROT_DMA && dev->dma_mode == 0) goto invalid_fld; - if (scsicmd[1] & 0xe0) + if (cdb[1] & 0xe0) /* PIO multi not supported yet */ goto invalid_fld; @@ -2546,18 +2539,18 @@ ata_scsi_pass_thru(struct ata_queued_cmd *qc, const u8 *scsicmd) * 12 and 16 byte CDBs use different offsets to * provide the various register values. */ - if (scsicmd[0] == ATA_16) { + if (cdb[0] == ATA_16) { /* * 16-byte CDB - may contain extended commands. * * If that is the case, copy the upper byte register values. */ - if (scsicmd[1] & 0x01) { - tf->hob_feature = scsicmd[3]; - tf->hob_nsect = scsicmd[5]; - tf->hob_lbal = scsicmd[7]; - tf->hob_lbam = scsicmd[9]; - tf->hob_lbah = scsicmd[11]; + if (cdb[1] & 0x01) { + tf->hob_feature = cdb[3]; + tf->hob_nsect = cdb[5]; + tf->hob_lbal = cdb[7]; + tf->hob_lbam = cdb[9]; + tf->hob_lbah = cdb[11]; tf->flags |= ATA_TFLAG_LBA48; } else tf->flags &= ~ATA_TFLAG_LBA48; @@ -2565,26 +2558,26 @@ ata_scsi_pass_thru(struct ata_queued_cmd *qc, const u8 *scsicmd) /* * Always copy low byte, device and command registers. */ - tf->feature = scsicmd[4]; - tf->nsect = scsicmd[6]; - tf->lbal = scsicmd[8]; - tf->lbam = scsicmd[10]; - tf->lbah = scsicmd[12]; - tf->device = scsicmd[13]; - tf->command = scsicmd[14]; + tf->feature = cdb[4]; + tf->nsect = cdb[6]; + tf->lbal = cdb[8]; + tf->lbam = cdb[10]; + tf->lbah = cdb[12]; + tf->device = cdb[13]; + tf->command = cdb[14]; } else { /* * 12-byte CDB - incapable of extended commands. */ tf->flags &= ~ATA_TFLAG_LBA48; - tf->feature = scsicmd[3]; - tf->nsect = scsicmd[4]; - tf->lbal = scsicmd[5]; - tf->lbam = scsicmd[6]; - tf->lbah = scsicmd[7]; - tf->device = scsicmd[8]; - tf->command = scsicmd[9]; + tf->feature = cdb[3]; + tf->nsect = cdb[4]; + tf->lbal = cdb[5]; + tf->lbam = cdb[6]; + tf->lbah = cdb[7]; + tf->device = cdb[8]; + tf->command = cdb[9]; } /* * If slave is possible, enforce correct master/slave bit @@ -2611,7 +2604,7 @@ ata_scsi_pass_thru(struct ata_queued_cmd *qc, const u8 *scsicmd) */ tf->flags |= (ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE); - if (cmd->sc_data_direction == DMA_TO_DEVICE) + if (scmd->sc_data_direction == DMA_TO_DEVICE) tf->flags |= ATA_TFLAG_WRITE; /* @@ -2620,7 +2613,7 @@ ata_scsi_pass_thru(struct ata_queued_cmd *qc, const u8 *scsicmd) * TODO: find out if we need to do more here to * cover scatter/gather case. */ - qc->nsect = cmd->request_bufflen / ATA_SECT_SIZE; + qc->nsect = scmd->request_bufflen / ATA_SECT_SIZE; /* request result TF */ qc->flags |= ATA_QCFLAG_RESULT_TF; @@ -2628,7 +2621,7 @@ ata_scsi_pass_thru(struct ata_queued_cmd *qc, const u8 *scsicmd) return 0; invalid_fld: - ata_scsi_set_sense(qc->scsicmd, ILLEGAL_REQUEST, 0x24, 0x00); + ata_scsi_set_sense(scmd, ILLEGAL_REQUEST, 0x24, 0x00); /* "Invalid field in cdb" */ return 1; } @@ -2701,7 +2694,7 @@ static inline void ata_scsi_dump_cdb(struct ata_port *ap, #endif } -static inline int __ata_scsi_queuecmd(struct scsi_cmnd *cmd, +static inline int __ata_scsi_queuecmd(struct scsi_cmnd *scmd, void (*done)(struct scsi_cmnd *), struct ata_device *dev) { @@ -2709,14 +2702,14 @@ static inline int __ata_scsi_queuecmd(struct scsi_cmnd *cmd, if (dev->class == ATA_DEV_ATA) { ata_xlat_func_t xlat_func = ata_get_xlat_func(dev, - cmd->cmnd[0]); + scmd->cmnd[0]); if (xlat_func) - rc = ata_scsi_translate(dev, cmd, done, xlat_func); + rc = ata_scsi_translate(dev, scmd, done, xlat_func); else - ata_scsi_simulate(dev, cmd, done); + ata_scsi_simulate(dev, scmd, done); } else - rc = ata_scsi_translate(dev, cmd, done, atapi_xlat); + rc = ata_scsi_translate(dev, scmd, done, atapi_xlat); return rc; } -- 2.20.1