From 9a31f0f7679aeaf79c613feaa3f4170741ccb218 Mon Sep 17 00:00:00 2001 From: Krzysztof Helt Date: Tue, 8 May 2007 00:39:57 -0700 Subject: [PATCH] pm2fb: memclock setting corrections This patch disables a memory clock setting if a board has been initialized by BIOS. This allows using the memory clock set by manufacturer of the board. This patch also sets default clock for 3dlabs Permedia 2V reference board's clock to 75MHz (BIOS setting for EONtronic Permedia 2Vboard), because the default 83MHz can be too high. Signed-off-by: Krzysztof Helt Signed-off-by: Antonino Daplas Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/video/pm2fb.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/video/pm2fb.c b/drivers/video/pm2fb.c index 33f17a96a5..539541946b 100644 --- a/drivers/video/pm2fb.c +++ b/drivers/video/pm2fb.c @@ -1141,10 +1141,10 @@ static int __devinit pm2fb_probe(struct pci_dev *pdev, default_par->mem_control, default_par->boot_address, default_par->mem_config); - default_par->memclock = CVPPC_MEMCLOCK; if(default_par->mem_control == 0 && default_par->boot_address == 0x31 && default_par->mem_config == 0x259fffff) { + default_par->memclock = CVPPC_MEMCLOCK; default_par->mem_control=0; default_par->boot_address=0x20; default_par->mem_config=0xe6002021; @@ -1164,7 +1164,7 @@ static int __devinit pm2fb_probe(struct pci_dev *pdev, DPRINTK("We have not been initialized by VGA BIOS " "and are running on an 3dlabs reference board\n"); DPRINTK("Initializing card timings manually...\n"); - default_par->memclock=70000; + default_par->memclock=74894; } } -- 2.20.1