From c7bce3097c0f9bbed76ee6fd03742f2624031a45 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Sat, 30 Sep 2006 23:27:24 -0700 Subject: [PATCH] [PATCH] serial: Fix up offenders peering at baud bits directly Stop some other people peering into the baud bits on their own and make them use the tty_get_baud_rate() helper as a preperation for the move to the new termios. Corrected dependancy previous one had on new termios structs Signed-off-by: Alan Cox Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/char/moxa.c | 80 ++++-------------------------------------- drivers/char/mxser.c | 66 +--------------------------------- drivers/char/riscom8.c | 22 +++--------- 3 files changed, 11 insertions(+), 157 deletions(-) diff --git a/drivers/char/moxa.c b/drivers/char/moxa.c index a369dd6877..c1a6d3c48d 100644 --- a/drivers/char/moxa.c +++ b/drivers/char/moxa.c @@ -260,7 +260,7 @@ static void MoxaPortEnable(int); static void MoxaPortDisable(int); static long MoxaPortGetMaxBaud(int); static long MoxaPortSetBaud(int, long); -static int MoxaPortSetTermio(int, struct termios *); +static int MoxaPortSetTermio(int, struct termios *, speed_t); static int MoxaPortGetLineOut(int, int *, int *); static void MoxaPortLineCtrl(int, int, int); static void MoxaPortFlowCtrl(int, int, int, int, int, int); @@ -986,7 +986,7 @@ static void set_tty_param(struct tty_struct *tty) if (ts->c_iflag & IXANY) xany = 1; MoxaPortFlowCtrl(ch->port, rts, cts, txflow, rxflow, xany); - MoxaPortSetTermio(ch->port, ts); + MoxaPortSetTermio(ch->port, ts, tty_get_baud_rate(tty)); } static int block_till_ready(struct tty_struct *tty, struct file *filp, @@ -1900,9 +1900,10 @@ int MoxaPortsOfCard(int cardno) * * Function 12: Configure the port. * Syntax: - * int MoxaPortSetTermio(int port, struct termios *termio); + * int MoxaPortSetTermio(int port, struct termios *termio, speed_t baud); * int port : port number (0 - 127) * struct termios * termio : termio structure pointer + * speed_t baud : baud rate * * return: -1 : this port is invalid or termio == NULL * 0 : setting O.K. @@ -2182,11 +2183,10 @@ long MoxaPortSetBaud(int port, long baud) return (baud); } -int MoxaPortSetTermio(int port, struct termios *termio) +int MoxaPortSetTermio(int port, struct termios *termio, speed_t baud) { void __iomem *ofsAddr; tcflag_t cflag; - long baud; tcflag_t mode = 0; if (moxaChkPort[port] == 0 || termio == 0) @@ -2222,77 +2222,9 @@ int MoxaPortSetTermio(int port, struct termios *termio) moxafunc(ofsAddr, FC_SetDataMode, (ushort) mode); - cflag &= (CBAUD | CBAUDEX); -#ifndef B921600 -#define B921600 (B460800+1) -#endif - switch (cflag) { - case B921600: - baud = 921600L; - break; - case B460800: - baud = 460800L; - break; - case B230400: - baud = 230400L; - break; - case B115200: - baud = 115200L; - break; - case B57600: - baud = 57600L; - break; - case B38400: - baud = 38400L; - break; - case B19200: - baud = 19200L; - break; - case B9600: - baud = 9600L; - break; - case B4800: - baud = 4800L; - break; - case B2400: - baud = 2400L; - break; - case B1800: - baud = 1800L; - break; - case B1200: - baud = 1200L; - break; - case B600: - baud = 600L; - break; - case B300: - baud = 300L; - break; - case B200: - baud = 200L; - break; - case B150: - baud = 150L; - break; - case B134: - baud = 134L; - break; - case B110: - baud = 110L; - break; - case B75: - baud = 75L; - break; - case B50: - baud = 50L; - break; - default: - baud = 0; - } if ((moxa_boards[port / MAX_PORTS_PER_BOARD].boardType == MOXA_BOARD_C320_ISA) || (moxa_boards[port / MAX_PORTS_PER_BOARD].boardType == MOXA_BOARD_C320_PCI)) { - if (baud == 921600L) + if (baud >= 921600L) return (-1); } MoxaPortSetBaud(port, baud); diff --git a/drivers/char/mxser.c b/drivers/char/mxser.c index 556abd3e0d..27a6537720 100644 --- a/drivers/char/mxser.c +++ b/drivers/char/mxser.c @@ -2554,71 +2554,7 @@ static int mxser_change_speed(struct mxser_struct *info, struct termios *old_ter #define B921600 (B460800 +1) #endif if (mxser_set_baud_method[info->port] == 0) { - switch (cflag & (CBAUD | CBAUDEX)) { - case B921600: - baud = 921600; - break; - case B460800: - baud = 460800; - break; - case B230400: - baud = 230400; - break; - case B115200: - baud = 115200; - break; - case B57600: - baud = 57600; - break; - case B38400: - baud = 38400; - break; - case B19200: - baud = 19200; - break; - case B9600: - baud = 9600; - break; - case B4800: - baud = 4800; - break; - case B2400: - baud = 2400; - break; - case B1800: - baud = 1800; - break; - case B1200: - baud = 1200; - break; - case B600: - baud = 600; - break; - case B300: - baud = 300; - break; - case B200: - baud = 200; - break; - case B150: - baud = 150; - break; - case B134: - baud = 134; - break; - case B110: - baud = 110; - break; - case B75: - baud = 75; - break; - case B50: - baud = 50; - break; - default: - baud = 0; - break; - } + baud = tty_get_baud_rate(info->tty); mxser_set_baud(info, baud); } diff --git a/drivers/char/riscom8.c b/drivers/char/riscom8.c index f1c94f771a..06b9f78a95 100644 --- a/drivers/char/riscom8.c +++ b/drivers/char/riscom8.c @@ -675,26 +675,12 @@ static void rc_change_speed(struct riscom_board *bp, struct riscom_port *port) port->COR2 = 0; port->MSVR = MSVR_RTS; - baud = C_BAUD(tty); - - if (baud & CBAUDEX) { - baud &= ~CBAUDEX; - if (baud < 1 || baud > 2) - port->tty->termios->c_cflag &= ~CBAUDEX; - else - baud += 15; - } - if (baud == 15) { - if ((port->flags & ASYNC_SPD_MASK) == ASYNC_SPD_HI) - baud ++; - if ((port->flags & ASYNC_SPD_MASK) == ASYNC_SPD_VHI) - baud += 2; - } + baud = tty_get_baud_rate(tty); /* Select port on the board */ rc_out(bp, CD180_CAR, port_No(port)); - if (!baud_table[baud]) { + if (!baud) { /* Drop DTR & exit */ bp->DTR |= (1u << port_No(port)); rc_out(bp, RC_DTR, bp->DTR); @@ -710,7 +696,7 @@ static void rc_change_speed(struct riscom_board *bp, struct riscom_port *port) */ /* Set baud rate for port */ - tmp = (((RC_OSCFREQ + baud_table[baud]/2) / baud_table[baud] + + tmp = (((RC_OSCFREQ + baud/2) / baud + CD180_TPC/2) / CD180_TPC); rc_out(bp, CD180_RBPRH, (tmp >> 8) & 0xff); @@ -718,7 +704,7 @@ static void rc_change_speed(struct riscom_board *bp, struct riscom_port *port) rc_out(bp, CD180_RBPRL, tmp & 0xff); rc_out(bp, CD180_TBPRL, tmp & 0xff); - baud = (baud_table[baud] + 5) / 10; /* Estimated CPS */ + baud = (baud + 5) / 10; /* Estimated CPS */ /* Two timer ticks seems enough to wakeup something like SLIP driver */ tmp = ((baud + HZ/2) / HZ) * 2 - CD180_NFIFO; -- 2.20.1