#============================================================= -*-perl-*- # # Configuration file for BackupPC. # # DESCRIPTION # # This is the main configuration file for BackupPC. # # This file must be valid perl source, so make sure the punctuation, # quotes, and other syntax are valid. # # This file is read by BackupPC at startup, when a HUP (-1) signal # is sent to BackupPC and also at each wakeup time whenever the # modification time of this file changes. # # The configuration parameters are divided into four general groups. # The first group (general server configuration) provides general # configuration for BackupPC. The next two groups describe what # to backup, when to do it, and how long to keep it. The fourth # group are settings for the CGI http interface. # # Configuration settings can also be specified on a per-PC basis. # Simply put the relevant settings in a config.pl file in the # PC's backup directory (ie: in __TOPDIR__/pc/hostName). # All configuration settings in the second, third and fourth # groups can be overridden by the per-PC config.pl file. # # AUTHOR # Craig Barratt # # COPYRIGHT # Copyright (C) 2001-2009 Craig Barratt # # See http://backuppc.sourceforge.net. # #======================================================================== ########################################################################### # General server configuration ########################################################################### # # Host name on which the BackupPC server is running. # $Conf{ServerHost} = ''; # # TCP port number on which the BackupPC server listens for and accepts # connections. Normally this should be disabled (set to -1). The TCP # port is only needed if apache runs on a different machine from BackupPC. # In that case, set this to any spare port number over 1024 (eg: 2359). # If you enable the TCP port, make sure you set $Conf{ServerMesgSecret} # too! # $Conf{ServerPort} = -1; # # Shared secret to make the TCP port secure. Set this to a hard to guess # string if you enable the TCP port (ie: $Conf{ServerPort} > 0). # # To avoid possible attacks via the TCP socket interface, every client # message is protected by an MD5 digest. The MD5 digest includes four # items: # - a seed that is sent to the client when the connection opens # - a sequence number that increments for each message # - a shared secret that is stored in $Conf{ServerMesgSecret} # - the message itself. # # The message is sent in plain text preceded by the MD5 digest. A # snooper can see the plain-text seed sent by BackupPC and plain-text # message from the client, but cannot construct a valid MD5 digest since # the secret $Conf{ServerMesgSecret} is unknown. A replay attack is # not possible since the seed changes on a per-connection and # per-message basis. # $Conf{ServerMesgSecret} = ''; # # PATH setting for BackupPC. An explicit value is necessary # for taint mode. Value shouldn't matter too much since # all execs use explicit paths. However, taint mode in perl # will complain if this directory is world writable. # $Conf{MyPath} = '/bin'; # # Permission mask for directories and files created by BackupPC. # Default value prevents any access from group other, and prevents # group write. # $Conf{UmaskMode} = 027; # # Times at which we wake up, check all the PCs, and schedule necessary # backups. Times are measured in hours since midnight. Can be # fractional if necessary (eg: 4.25 means 4:15am). # # If the hosts you are backing up are always connected to the network # you might have only one or two wakeups each night. This will keep # the backup activity after hours. On the other hand, if you are backing # up laptops that are only intermittently connected to the network you # will want to have frequent wakeups (eg: hourly) to maximize the chance # that each laptop is backed up. # # Examples: # $Conf{WakeupSchedule} = [22.5]; # once per day at 10:30 pm. # $Conf{WakeupSchedule} = [2,4,6,8,10,12,14,16,18,20,22]; # every 2 hours # # The default value is every hour except midnight. # # The first entry of $Conf{WakeupSchedule} is when BackupPC_nightly is run. # You might want to re-arrange the entries in $Conf{WakeupSchedule} # (they don't have to be ascending) so that the first entry is when # you want BackupPC_nightly to run (eg: when you don't expect a lot # of regular backups to run). # $Conf{WakeupSchedule} = [1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23]; # # Maximum number of simultaneous backups to run. If there # are no user backup requests then this is the maximum number # of simultaneous backups. # $Conf{MaxBackups} = 4; # # Additional number of simultaneous backups that users can run. # As many as $Conf{MaxBackups} + $Conf{MaxUserBackups} requests can # run at the same time. # $Conf{MaxUserBackups} = 4; # # Maximum number of pending link commands. New backups will only be # started if there are no more than $Conf{MaxPendingCmds} plus # $Conf{MaxBackups} number of pending link commands, plus running jobs. # This limit is to make sure BackupPC doesn't fall too far behind in # running BackupPC_link commands. # $Conf{MaxPendingCmds} = 15; # # Nice level at which CmdQueue commands (eg: BackupPC_link and # BackupPC_nightly) are run at. # $Conf{CmdQueueNice} = 10; # # How many BackupPC_nightly processes to run in parallel. # # Each night, at the first wakeup listed in $Conf{WakeupSchedule}, # BackupPC_nightly is run. Its job is to remove unneeded files # in the pool, ie: files that only have one link. To avoid race # conditions, BackupPC_nightly and BackupPC_link cannot run at # the same time. Starting in v3.0.0, BackupPC_nightly can run # concurrently with backups (BackupPC_dump). # # So to reduce the elapsed time, you might want to increase this # setting to run several BackupPC_nightly processes in parallel # (eg: 4, or even 8). # $Conf{MaxBackupPCNightlyJobs} = 2; # # How many days (runs) it takes BackupPC_nightly to traverse the # entire pool. Normally this is 1, which means every night it runs, # it does traverse the entire pool removing unused pool files. # # Other valid values are 2, 4, 8, 16. This causes BackupPC_nightly to # traverse 1/2, 1/4, 1/8 or 1/16th of the pool each night, meaning it # takes 2, 4, 8 or 16 days to completely traverse the pool. The # advantage is that each night the running time of BackupPC_nightly # is reduced roughly in proportion, since the total job is split # over multiple days. The disadvantage is that unused pool files # take longer to get deleted, which will slightly increase disk # usage. # # Note that even when $Conf{BackupPCNightlyPeriod} > 1, BackupPC_nightly # still runs every night. It just does less work each time it runs. # # Examples: # # $Conf{BackupPCNightlyPeriod} = 1; # entire pool is checked every night # # $Conf{BackupPCNightlyPeriod} = 2; # two days to complete pool check # # (different half each night) # # $Conf{BackupPCNightlyPeriod} = 4; # four days to complete pool check # # (different quarter each night) # $Conf{BackupPCNightlyPeriod} = 1; # # Maximum number of log files we keep around in log directory. # These files are aged nightly. A setting of 14 means the log # directory will contain about 2 weeks of old log files, in # particular at most the files LOG, LOG.0, LOG.1, ... LOG.13 # (except today's LOG, these files will have a .z extension if # compression is on). # # If you decrease this number after BackupPC has been running for a # while you will have to manually remove the older log files. # $Conf{MaxOldLogFiles} = 14; # # Full path to the df command. Security caution: normal users # should not allowed to write to this file or directory. # $Conf{DfPath} = ''; # # Command to run df. The following variables are substituted at run-time: # # $dfPath path to df ($Conf{DfPath}) # $topDir top-level BackupPC data directory # # Note: all Cmds are executed directly without a shell, so the prog name # needs to be a full path and you can't include shell syntax like # redirection and pipes; put that in a script if you need it. # $Conf{DfCmd} = '$dfPath $topDir'; # # Full path to various commands for archiving # $Conf{SplitPath} = ''; $Conf{ParPath} = ''; $Conf{CatPath} = ''; $Conf{GzipPath} = ''; $Conf{Bzip2Path} = ''; # # Maximum threshold for disk utilization on the __TOPDIR__ filesystem. # If the output from $Conf{DfPath} reports a percentage larger than # this number then no new regularly scheduled backups will be run. # However, user requested backups (which are usually incremental and # tend to be small) are still performed, independent of disk usage. # Also, currently running backups will not be terminated when the disk # usage exceeds this number. # $Conf{DfMaxUsagePct} = 95; # # How long BackupPC_trashClean sleeps in seconds between each check # of the trash directory. Once every 5 minutes should be reasonable. # $Conf{TrashCleanSleepSec} = 300; # # List of DHCP address ranges we search looking for PCs to backup. # This is an array of hashes for each class C address range. # This is only needed if hosts in the conf/hosts file have the # dhcp flag set. # # Examples: # # to specify 192.10.10.20 to 192.10.10.250 as the DHCP address pool # $Conf{DHCPAddressRanges} = [ # { # ipAddrBase => '192.10.10', # first => 20, # last => 250, # }, # ]; # # to specify two pools (192.10.10.20-250 and 192.10.11.10-50) # $Conf{DHCPAddressRanges} = [ # { # ipAddrBase => '192.10.10', # first => 20, # last => 250, # }, # { # ipAddrBase => '192.10.11', # first => 10, # last => 50, # }, # ]; # $Conf{DHCPAddressRanges} = []; # # The BackupPC user. # $Conf{BackupPCUser} = ''; # # Important installation directories: # # TopDir - where all the backup data is stored # ConfDir - where the main config and hosts files resides # LogDir - where log files and other transient information # InstallDir - where the bin, lib and doc installation dirs reside. # Note: you cannot change this value since all the # perl scripts include this path. You must reinstall # with configure.pl to change InstallDir. # CgiDir - Apache CGI directory for BackupPC_Admin # # Note: it is STRONGLY recommended that you don't change the # values here. These are set at installation time and are here # for reference and are used during upgrades. # # Instead of changing TopDir here it is recommended that you use # a symbolic link to the new location, or mount the new BackupPC # store at the existing $Conf{TopDir} setting. # $Conf{TopDir} = ''; $Conf{ConfDir} = ''; $Conf{LogDir} = ''; $Conf{InstallDir} = ''; $Conf{CgiDir} = ''; # # Whether BackupPC and the CGI script BackupPC_Admin verify that they # are really running as user $Conf{BackupPCUser}. If this flag is set # and the effective user id (euid) differs from $Conf{BackupPCUser} # then both scripts exit with an error. This catches cases where # BackupPC might be accidently started as root or the wrong user, # or if the CGI script is not installed correctly. # $Conf{BackupPCUserVerify} = 1; # # Maximum number of hardlinks supported by the $TopDir file system # that BackupPC uses. Most linux or unix file systems should support # at least 32000 hardlinks per file, or 64000 in other cases. If a pool # file already has this number of hardlinks, a new pool file is created # so that new hardlinks can be accommodated. This limit will only # be hit if an identical file appears at least this number of times # across all the backups. # $Conf{HardLinkMax} = 31999; # # Advanced option for asking BackupPC to load additional perl modules. # Can be a list (array ref) of module names to load at startup. # $Conf{PerlModuleLoad} = undef; # # Path to init.d script and command to use that script to start the # server from the CGI interface. The following variables are substituted # at run-time: # # $sshPath path to ssh ($Conf{SshPath}) # $serverHost same as $Conf{ServerHost} # $serverInitdPath path to init.d script ($Conf{ServerInitdPath}) # # Example: # # $Conf{ServerInitdPath} = '/etc/init.d/backuppc'; # $Conf{ServerInitdStartCmd} = '$sshPath -q -x -l root $serverHost' # . ' $serverInitdPath start' # . ' < /dev/null >& /dev/null'; # # Note: all Cmds are executed directly without a shell, so the prog name # needs to be a full path and you can't include shell syntax like # redirection and pipes; put that in a script if you need it. # $Conf{ServerInitdPath} = ''; $Conf{ServerInitdStartCmd} = ''; ########################################################################### # What to backup and when to do it # (can be overridden in the per-PC config.pl) ########################################################################### # # Minimum period in days between full backups. A full dump will only be # done if at least this much time has elapsed since the last full dump, # and at least $Conf{IncrPeriod} days has elapsed since the last # successful dump. # # Typically this is set slightly less than an integer number of days. The # time taken for the backup, plus the granularity of $Conf{WakeupSchedule} # will make the actual backup interval a bit longer. # $Conf{FullPeriod} = 6.97; # # Minimum period in days between incremental backups (a user requested # incremental backup will be done anytime on demand). # # Typically this is set slightly less than an integer number of days. The # time taken for the backup, plus the granularity of $Conf{WakeupSchedule} # will make the actual backup interval a bit longer. # $Conf{IncrPeriod} = 0.97; # # Number of full backups to keep. Must be >= 1. # # In the steady state, each time a full backup completes successfully # the oldest one is removed. If this number is decreased, the # extra old backups will be removed. # # If filling of incremental dumps is off the oldest backup always # has to be a full (ie: filled) dump. This might mean one or two # extra full dumps are kept until the oldest incremental backups expire. # # Exponential backup expiry is also supported. This allows you to specify: # # - num fulls to keep at intervals of 1 * $Conf{FullPeriod}, followed by # - num fulls to keep at intervals of 2 * $Conf{FullPeriod}, # - num fulls to keep at intervals of 4 * $Conf{FullPeriod}, # - num fulls to keep at intervals of 8 * $Conf{FullPeriod}, # - num fulls to keep at intervals of 16 * $Conf{FullPeriod}, # # and so on. This works by deleting every other full as each expiry # boundary is crossed. # # Exponential expiry is specified using an array for $Conf{FullKeepCnt}: # # $Conf{FullKeepCnt} = [4, 2, 3]; # # Entry #n specifies how many fulls to keep at an interval of # 2^n * $Conf{FullPeriod} (ie: 1, 2, 4, 8, 16, 32, ...). # # The example above specifies keeping 4 of the most recent full backups # (1 week interval) two full backups at 2 week intervals, and 3 full # backups at 4 week intervals, eg: # # full 0 19 weeks old \ # full 1 15 weeks old >--- 3 backups at 4 * $Conf{FullPeriod} # full 2 11 weeks old / # full 3 7 weeks old \____ 2 backups at 2 * $Conf{FullPeriod} # full 4 5 weeks old / # full 5 3 weeks old \ # full 6 2 weeks old \___ 4 backups at 1 * $Conf{FullPeriod} # full 7 1 week old / # full 8 current / # # On a given week the spacing might be less than shown as each backup # ages through each expiry period. For example, one week later, a # new full is completed and the oldest is deleted, giving: # # full 0 16 weeks old \ # full 1 12 weeks old >--- 3 backups at 4 * $Conf{FullPeriod} # full 2 8 weeks old / # full 3 6 weeks old \____ 2 backups at 2 * $Conf{FullPeriod} # full 4 4 weeks old / # full 5 3 weeks old \ # full 6 2 weeks old \___ 4 backups at 1 * $Conf{FullPeriod} # full 7 1 week old / # full 8 current / # # You can specify 0 as a count (except in the first entry), and the # array can be as long as you wish. For example: # # $Conf{FullKeepCnt} = [4, 0, 4, 0, 0, 2]; # # This will keep 10 full dumps, 4 most recent at 1 * $Conf{FullPeriod}, # followed by 4 at an interval of 4 * $Conf{FullPeriod} (approx 1 month # apart), and then 2 at an interval of 32 * $Conf{FullPeriod} (approx # 7-8 months apart). # # Example: these two settings are equivalent and both keep just # the four most recent full dumps: # # $Conf{FullKeepCnt} = 4; # $Conf{FullKeepCnt} = [4]; # $Conf{FullKeepCnt} = 1; # # Very old full backups are removed after $Conf{FullAgeMax} days. However, # we keep at least $Conf{FullKeepCntMin} full backups no matter how old # they are. # # Note that $Conf{FullAgeMax} will be increased to $Conf{FullKeepCnt} # times $Conf{FullPeriod} if $Conf{FullKeepCnt} specifies enough # full backups to exceed $Conf{FullAgeMax}. # $Conf{FullKeepCntMin} = 1; $Conf{FullAgeMax} = 90; # # Number of incremental backups to keep. Must be >= 1. # # In the steady state, each time an incr backup completes successfully # the oldest one is removed. If this number is decreased, the # extra old backups will be removed. # $Conf{IncrKeepCnt} = 6; # # Very old incremental backups are removed after $Conf{IncrAgeMax} days. # However, we keep at least $Conf{IncrKeepCntMin} incremental backups no # matter how old they are. # $Conf{IncrKeepCntMin} = 1; $Conf{IncrAgeMax} = 30; # # Level of each incremental. "Level" follows the terminology # of dump(1). A full backup has level 0. A new incremental # of level N will backup all files that have changed since # the most recent backup of a lower level. # # The entries of $Conf{IncrLevels} apply in order to each # incremental after each full backup. It wraps around until # the next full backup. For example, these two settings # have the same effect: # # $Conf{IncrLevels} = [1, 2, 3]; # $Conf{IncrLevels} = [1, 2, 3, 1, 2, 3]; # # This means the 1st and 4th incrementals (level 1) go all # the way back to the full. The 2nd and 3rd (and 5th and # 6th) backups just go back to the immediate preceeding # incremental. # # Specifying a sequence of multi-level incrementals will # usually mean more than $Conf{IncrKeepCnt} incrementals will # need to be kept, since lower level incrementals are needed # to merge a complete view of a backup. For example, with # # $Conf{FullPeriod} = 7; # $Conf{IncrPeriod} = 1; # $Conf{IncrKeepCnt} = 6; # $Conf{IncrLevels} = [1, 2, 3, 4, 5, 6]; # # there will be up to 11 incrementals in this case: # # backup #0 (full, level 0, oldest) # backup #1 (incr, level 1) # backup #2 (incr, level 2) # backup #3 (incr, level 3) # backup #4 (incr, level 4) # backup #5 (incr, level 5) # backup #6 (incr, level 6) # backup #7 (full, level 0) # backup #8 (incr, level 1) # backup #9 (incr, level 2) # backup #10 (incr, level 3) # backup #11 (incr, level 4) # backup #12 (incr, level 5, newest) # # Backup #1 (the oldest level 1 incremental) can't be deleted # since backups 2..6 depend on it. Those 6 incrementals can't # all be deleted since that would only leave 5 (#8..12). # When the next incremental happens (level 6), the complete # set of 6 older incrementals (#1..6) will be deleted, since # that maintains the required number ($Conf{IncrKeepCnt}) # of incrementals. This situation is reduced if you set # shorter chains of multi-level incrementals, eg: # # $Conf{IncrLevels} = [1, 2, 3]; # # would only have up to 2 extra incremenals before all 3 # are deleted. # # BackupPC as usual merges the full and the sequence # of incrementals together so each incremental can be # browsed and restored as though it is a complete backup. # If you specify a long chain of incrementals then more # backups need to be merged when browsing, restoring, # or getting the starting point for rsync backups. # In the example above (levels 1..6), browing backup # #6 requires 7 different backups (#0..6) to be merged. # # Because of this merging and the additional incrementals # that need to be kept, it is recommended that some # level 1 incrementals be included in $Conf{IncrLevels}. # # Prior to version 3.0 incrementals were always level 1, # meaning each incremental backed up all the files that # changed since the last full. # $Conf{IncrLevels} = [1]; # # Disable all full and incremental backups. These settings are # useful for a client that is no longer being backed up # (eg: a retired machine), but you wish to keep the last # backups available for browsing or restoring to other machines. # # There are three values for $Conf{BackupsDisable}: # # 0 Backups are enabled. # # 1 Don't do any regular backups on this client. Manually # requested backups (via the CGI interface) will still occur. # # 2 Don't do any backups on this client. Manually requested # backups (via the CGI interface) will be ignored. # # In versions prior to 3.0 Backups were disabled by setting # $Conf{FullPeriod} to -1 or -2. # $Conf{BackupsDisable} = 0; # # A failed full backup is saved as a partial backup. The rsync # XferMethod can take advantage of the partial full when the next # backup is run. This parameter sets the age of the partial full # in days: if the partial backup is older than this number of # days, then rsync will ignore (not use) the partial full when # the next backup is run. If you set this to a negative value # then no partials will be saved. If you set this to 0, partials # will be saved, but will not be used by the next backup. # # The default setting of 3 days means that a partial older than # 3 days is ignored when the next full backup is done. # $Conf{PartialAgeMax} = 3; # # Whether incremental backups are filled. "Filling" means that the # most recent full (or filled) dump is merged into the new incremental # dump using hardlinks. This makes an incremental dump look like a # full dump. Prior to v1.03 all incremental backups were filled. # In v1.4.0 and later the default is off. # # BackupPC, and the cgi interface in particular, do the right thing on # un-filled incremental backups. It will correctly display the merged # incremental backup with the most recent filled backup, giving the # un-filled incremental backups a filled appearance. That means it # invisible to the user whether incremental dumps are filled or not. # # Filling backups takes a little extra disk space, and it does cost # some extra disk activity for filling, and later removal. Filling # is no longer useful, since file mangling and compression doesn't # make a filled backup very useful. It's likely the filling option # will be removed from future versions: filling will be delegated to # the display and extraction of backup data. # # If filling is off, BackupPC makes sure that the oldest backup is # a full, otherwise the following incremental backups will be # incomplete. This might mean an extra full backup has to be # kept until the following incremental backups expire. # # The default is off. You can turn this on or off at any # time without affecting existing backups. # $Conf{IncrFill} = 0; # # Number of restore logs to keep. BackupPC remembers information about # each restore request. This number per client will be kept around before # the oldest ones are pruned. # # Note: files/dirs delivered via Zip or Tar downloads don't count as # restores. Only the first restore option (where the files and dirs # are written to the host) count as restores that are logged. # $Conf{RestoreInfoKeepCnt} = 10; # # Number of archive logs to keep. BackupPC remembers information # about each archive request. This number per archive client will # be kept around before the oldest ones are pruned. # $Conf{ArchiveInfoKeepCnt} = 10; # # List of directories or files to backup. If this is defined, only these # directories or files will be backed up. # # For Smb, only one of $Conf{BackupFilesExclude} and $Conf{BackupFilesOnly} # can be specified per share. If both are set for a particular share, then # $Conf{BackupFilesOnly} takes precedence and $Conf{BackupFilesExclude} # is ignored. # # This can be set to a string, an array of strings, or, in the case # of multiple shares, a hash of strings or arrays. A hash is used # to give a list of directories or files to backup for each share # (the share name is the key). If this is set to just a string or # array, and $Conf{SmbShareName} contains multiple share names, then # the setting is assumed to apply all shares. # # If a hash is used, a special key "*" means it applies to all # shares that don't have a specific entry. # # Examples: # $Conf{BackupFilesOnly} = '/myFiles'; # $Conf{BackupFilesOnly} = ['/myFiles']; # same as first example # $Conf{BackupFilesOnly} = ['/myFiles', '/important']; # $Conf{BackupFilesOnly} = { # 'c' => ['/myFiles', '/important'], # these are for 'c' share # 'd' => ['/moreFiles', '/archive'], # these are for 'd' share # }; # $Conf{BackupFilesOnly} = { # 'c' => ['/myFiles', '/important'], # these are for 'c' share # '*' => ['/myFiles', '/important'], # these are other shares # }; # $Conf{BackupFilesOnly} = undef; # # List of directories or files to exclude from the backup. For Smb, # only one of $Conf{BackupFilesExclude} and $Conf{BackupFilesOnly} # can be specified per share. If both are set for a particular share, # then $Conf{BackupFilesOnly} takes precedence and # $Conf{BackupFilesExclude} is ignored. # # This can be set to a string, an array of strings, or, in the case # of multiple shares, a hash of strings or arrays. A hash is used # to give a list of directories or files to exclude for each share # (the share name is the key). If this is set to just a string or # array, and $Conf{SmbShareName} contains multiple share names, then # the setting is assumed to apply to all shares. # # The exact behavior is determined by the underlying transport program, # smbclient or tar. For smbclient the exlclude file list is passed into # the X option. Simple shell wild-cards using "*" or "?" are allowed. # # For tar, if the exclude file contains a "/" it is assumed to be anchored # at the start of the string. Since all the tar paths start with "./", # BackupPC prepends a "." if the exclude file starts with a "/". Note # that GNU tar version >= 1.13.7 is required for the exclude option to # work correctly. For linux or unix machines you should add # "/proc" to $Conf{BackupFilesExclude} unless you have specified # --one-file-system in $Conf{TarClientCmd} or --one-file-system in # $Conf{RsyncArgs}. Also, for tar, do not use a trailing "/" in # the directory name: a trailing "/" causes the name to not match # and the directory will not be excluded. # # Users report that for smbclient you should specify a directory # followed by "/*", eg: "/proc/*", instead of just "/proc". # # FTP servers are traversed recursively so excluding directories will # also exclude its contents. You can use the wildcard characters "*" # and "?" to define files for inclusion and exclusion. Both # attributes $Conf{BackupFilesOnly} and $Conf{BackupFilesExclude} can # be defined for the same share. # # If a hash is used, a special key "*" means it applies to all # shares that don't have a specific entry. # # Examples: # $Conf{BackupFilesExclude} = '/temp'; # $Conf{BackupFilesExclude} = ['/temp']; # same as first example # $Conf{BackupFilesExclude} = ['/temp', '/winnt/tmp']; # $Conf{BackupFilesExclude} = { # 'c' => ['/temp', '/winnt/tmp'], # these are for 'c' share # 'd' => ['/junk', '/dont_back_this_up'], # these are for 'd' share # }; # $Conf{BackupFilesExclude} = { # 'c' => ['/temp', '/winnt/tmp'], # these are for 'c' share # '*' => ['/junk', '/dont_back_this_up'], # these are for other shares # }; # $Conf{BackupFilesExclude} = undef; # # PCs that are always or often on the network can be backed up after # hours, to reduce PC, network and server load during working hours. For # each PC a count of consecutive good pings is maintained. Once a PC has # at least $Conf{BlackoutGoodCnt} consecutive good pings it is subject # to "blackout" and not backed up during hours and days specified by # $Conf{BlackoutPeriods}. # # To allow for periodic rebooting of a PC or other brief periods when a # PC is not on the network, a number of consecutive bad pings is allowed # before the good ping count is reset. This parameter is # $Conf{BlackoutBadPingLimit}. # # Note that bad and good pings don't occur with the same interval. If a # machine is always on the network, it will only be pinged roughly once # every $Conf{IncrPeriod} (eg: once per day). So a setting for # $Conf{BlackoutGoodCnt} of 7 means it will take around 7 days for a # machine to be subject to blackout. On the other hand, if a ping is # failed, it will be retried roughly every time BackupPC wakes up, eg, # every one or two hours. So a setting for $Conf{BlackoutBadPingLimit} of # 3 means that the PC will lose its blackout status after 3-6 hours of # unavailability. # # To disable the blackout feature set $Conf{BlackoutGoodCnt} to a negative # value. A value of 0 will make all machines subject to blackout. But # if you don't want to do any backups during the day it would be easier # to just set $Conf{WakeupSchedule} to a restricted schedule. # $Conf{BlackoutBadPingLimit} = 3; $Conf{BlackoutGoodCnt} = 7; # # One or more blackout periods can be specified. If a client is # subject to blackout then no regular (non-manual) backups will # be started during any of these periods. hourBegin and hourEnd # specify hours fro midnight and weekDays is a list of days of # the week where 0 is Sunday, 1 is Monday etc. # # For example: # # $Conf{BlackoutPeriods} = [ # { # hourBegin => 7.0, # hourEnd => 19.5, # weekDays => [1, 2, 3, 4, 5], # }, # ]; # # specifies one blackout period from 7:00am to 7:30pm local time # on Mon-Fri. # # The blackout period can also span midnight by setting # hourBegin > hourEnd, eg: # # $Conf{BlackoutPeriods} = [ # { # hourBegin => 7.0, # hourEnd => 19.5, # weekDays => [1, 2, 3, 4, 5], # }, # { # hourBegin => 23, # hourEnd => 5, # weekDays => [5, 6], # }, # ]; # # This specifies one blackout period from 7:00am to 7:30pm local time # on Mon-Fri, and a second period from 11pm to 5am on Friday and # Saturday night. # $Conf{BlackoutPeriods} = [ { hourBegin => 7.0, hourEnd => 19.5, weekDays => [1, 2, 3, 4, 5], }, ]; # # A backup of a share that has zero files is considered fatal. This is # used to catch miscellaneous Xfer errors that result in no files being # backed up. If you have shares that might be empty (and therefore an # empty backup is valid) you should set this flag to 0. # $Conf{BackupZeroFilesIsFatal} = 1; ########################################################################### # How to backup a client # (can be overridden in the per-PC config.pl) ########################################################################### # # What transport method to use to backup each host. If you have # a mixed set of WinXX and linux/unix hosts you will need to override # this in the per-PC config.pl. # # The valid values are: # # - 'smb': backup and restore via smbclient and the SMB protocol. # Easiest choice for WinXX. # # - 'rsync': backup and restore via rsync (via rsh or ssh). # Best choice for linux/unix. Good choice also for WinXX. # # - 'rsyncd': backup and restore via rsync daemon on the client. # Best choice for linux/unix if you have rsyncd running on # the client. Good choice also for WinXX. # # - 'tar': backup and restore via tar, tar over ssh, rsh or nfs. # Good choice for linux/unix. # # - 'archive': host is a special archive host. Backups are not done. # An archive host is used to archive other host's backups # to permanent media, such as tape, CDR or DVD. # # $Conf{XferMethod} = 'smb'; # # Level of verbosity in Xfer log files. 0 means be quiet, 1 will give # will give one line per file, 2 will also show skipped files on # incrementals, higher values give more output. # $Conf{XferLogLevel} = 1; # # Filename charset encoding on the client. BackupPC uses utf8 # on the server for filename encoding. If this is empty, then # utf8 is assumed and client filenames will not be modified. # If set to a different encoding then filenames will converted # to/from utf8 automatically during backup and restore. # # If the file names displayed in the browser (eg: accents or special # characters) don't look right then it is likely you haven't set # $Conf{ClientCharset} correctly. # # If you are using smbclient on a WinXX machine, smbclient will convert # to the "unix charset" setting in smb.conf. The default is utf8, # in which case leave $Conf{ClientCharset} empty since smbclient does # the right conversion. # # If you are using rsync on a WinXX machine then it does no conversion. # A typical WinXX encoding for latin1/western europe is 'cp1252', # so in this case set $Conf{ClientCharset} to 'cp1252'. # # On a linux or unix client, run "locale charmap" to see the client's # charset. Set $Conf{ClientCharset} to this value. A typical value # for english/US is 'ISO-8859-1'. # # Do "perldoc Encode::Supported" to see the list of possible charset # values. The FAQ at http://www.cl.cam.ac.uk/~mgk25/unicode.html # is excellent, and http://czyborra.com/charsets/iso8859.html # provides more information on the iso-8859 charsets. # $Conf{ClientCharset} = ''; # # Prior to 3.x no charset conversion was done by BackupPC. Backups were # stored in what ever charset the XferMethod provided - typically utf8 # for smbclient and the client's locale settings for rsync and tar (eg: # cp1252 for rsync on WinXX and perhaps iso-8859-1 with rsync on linux). # This setting tells BackupPC the charset that was used to store file # names in old backups taken with BackupPC 2.x, so that non-ascii file # names in old backups can be viewed and restored. # $Conf{ClientCharsetLegacy} = 'iso-8859-1'; ########################################################################### # Samba Configuration # (can be overwritten in the per-PC log file) ########################################################################### # # Name of the host share that is backed up when using SMB. This can be a # string or an array of strings if there are multiple shares per host. # Examples: # # $Conf{SmbShareName} = 'c'; # backup 'c' share # $Conf{SmbShareName} = ['c', 'd']; # backup 'c' and 'd' shares # # This setting only matters if $Conf{XferMethod} = 'smb'. # $Conf{SmbShareName} = 'C$'; # # Smbclient share user name. This is passed to smbclient's -U argument. # # This setting only matters if $Conf{XferMethod} = 'smb'. # $Conf{SmbShareUserName} = ''; # # Smbclient share password. This is passed to smbclient via its PASSWD # environment variable. There are several ways you can tell BackupPC # the smb share password. In each case you should be very careful about # security. If you put the password here, make sure that this file is # not readable by regular users! See the "Setting up config.pl" section # in the documentation for more information. # # This setting only matters if $Conf{XferMethod} = 'smb'. # $Conf{SmbSharePasswd} = ''; # # Full path for smbclient. Security caution: normal users should not # allowed to write to this file or directory. # # smbclient is from the Samba distribution. smbclient is used to # actually extract the incremental or full dump of the share filesystem # from the PC. # # This setting only matters if $Conf{XferMethod} = 'smb'. # $Conf{SmbClientPath} = ''; # # Command to run smbclient for a full dump. # This setting only matters if $Conf{XferMethod} = 'smb'. # # The following variables are substituted at run-time: # # $smbClientPath same as $Conf{SmbClientPath} # $host host to backup/restore # $hostIP host IP address # $shareName share name # $userName user name # $fileList list of files to backup (based on exclude/include) # $I_option optional -I option to smbclient # $X_option exclude option (if $fileList is an exclude list) # $timeStampFile start time for incremental dump # # Note: all Cmds are executed directly without a shell, so the prog name # needs to be a full path and you can't include shell syntax like # redirection and pipes; put that in a script if you need it. # $Conf{SmbClientFullCmd} = '$smbClientPath \\\\$host\\$shareName' . ' $I_option -U $userName -E -N -d 1' . ' -c tarmode\\ full -Tc$X_option - $fileList'; # # Command to run smbclient for an incremental dump. # This setting only matters if $Conf{XferMethod} = 'smb'. # # Same variable substitutions are applied as $Conf{SmbClientFullCmd}. # # Note: all Cmds are executed directly without a shell, so the prog name # needs to be a full path and you can't include shell syntax like # redirection and pipes; put that in a script if you need it. # $Conf{SmbClientIncrCmd} = '$smbClientPath \\\\$host\\$shareName' . ' $I_option -U $userName -E -N -d 1' . ' -c tarmode\\ full -TcN$X_option $timeStampFile - $fileList'; # # Command to run smbclient for a restore. # This setting only matters if $Conf{XferMethod} = 'smb'. # # Same variable substitutions are applied as $Conf{SmbClientFullCmd}. # # If your smb share is read-only then direct restores will fail. # You should set $Conf{SmbClientRestoreCmd} to undef and the # corresponding CGI restore option will be removed. # # Note: all Cmds are executed directly without a shell, so the prog name # needs to be a full path and you can't include shell syntax like # redirection and pipes; put that in a script if you need it. # $Conf{SmbClientRestoreCmd} = '$smbClientPath \\\\$host\\$shareName' . ' $I_option -U $userName -E -N -d 1' . ' -c tarmode\\ full -Tx -'; ########################################################################### # Tar Configuration # (can be overwritten in the per-PC log file) ########################################################################### # # Which host directories to backup when using tar transport. This can be a # string or an array of strings if there are multiple directories to # backup per host. Examples: # # $Conf{TarShareName} = '/'; # backup everything # $Conf{TarShareName} = '/home'; # only backup /home # $Conf{TarShareName} = ['/home', '/src']; # backup /home and /src # # The fact this parameter is called 'TarShareName' is for historical # consistency with the Smb transport options. You can use any valid # directory on the client: there is no need for it to correspond to # any Smb share or device mount point. # # Note also that you can also use $Conf{BackupFilesOnly} to specify # a specific list of directories to backup. It's more efficient to # use this option instead of $Conf{TarShareName} since a new tar is # run for each entry in $Conf{TarShareName}. # # On the other hand, if you add --one-file-system to $Conf{TarClientCmd} # you can backup each file system separately, which makes restoring one # bad file system easier. In this case you would list all of the mount # points here, since you can't get the same result with # $Conf{BackupFilesOnly}: # # $Conf{TarShareName} = ['/', '/var', '/data', '/boot']; # # This setting only matters if $Conf{XferMethod} = 'tar'. # $Conf{TarShareName} = '/'; # # Full command to run tar on the client. GNU tar is required. You will # need to fill in the correct paths for ssh2 on the local host (server) # and GNU tar on the client. Security caution: normal users should not # allowed to write to these executable files or directories. # # See the documentation for more information about setting up ssh2 keys. # # If you plan to use NFS then tar just runs locally and ssh2 is not needed. # For example, assuming the client filesystem is mounted below /mnt/hostName, # you could use something like: # # $Conf{TarClientCmd} = '$tarPath -c -v -f - -C /mnt/$host/$shareName' # . ' --totals'; # # In the case of NFS or rsh you need to make sure BackupPC's privileges # are sufficient to read all the files you want to backup. Also, you # will probably want to add "/proc" to $Conf{BackupFilesExclude}. # # The following variables are substituted at run-time: # # $host host name # $hostIP host's IP address # $incrDate newer-than date for incremental backups # $shareName share name to backup (ie: top-level directory path) # $fileList specific files to backup or exclude # $tarPath same as $Conf{TarClientPath} # $sshPath same as $Conf{SshPath} # # If a variable is followed by a "+" it is shell escaped. This is # necessary for the command part of ssh or rsh, since it ends up # getting passed through the shell. # # This setting only matters if $Conf{XferMethod} = 'tar'. # # Note: all Cmds are executed directly without a shell, so the prog name # needs to be a full path and you can't include shell syntax like # redirection and pipes; put that in a script if you need it. # $Conf{TarClientCmd} = '$sshPath -q -x -n -l root $host' . ' env LC_ALL=C $tarPath -c -v -f - -C $shareName+' . ' --totals'; # # Extra tar arguments for full backups. Several variables are substituted at # run-time. See $Conf{TarClientCmd} for the list of variable substitutions. # # If you are running tar locally (ie: without rsh or ssh) then remove the # "+" so that the argument is no longer shell escaped. # # This setting only matters if $Conf{XferMethod} = 'tar'. # $Conf{TarFullArgs} = '$fileList+'; # # Extra tar arguments for incr backups. Several variables are substituted at # run-time. See $Conf{TarClientCmd} for the list of variable substitutions. # # Note that GNU tar has several methods for specifying incremental backups, # including: # # --newer-mtime $incrDate+ # This causes a file to be included if the modification time is # later than $incrDate (meaning its contents might have changed). # But changes in the ownership or modes will not qualify the # file to be included in an incremental. # # --newer=$incrDate+ # This causes the file to be included if any attribute of the # file is later than $incrDate, meaning either attributes or # the modification time. This is the default method. Do # not use --atime-preserve in $Conf{TarClientCmd} above, # otherwise resetting the atime (access time) counts as an # attribute change, meaning the file will always be included # in each new incremental dump. # # If you are running tar locally (ie: without rsh or ssh) then remove the # "+" so that the argument is no longer shell escaped. # # This setting only matters if $Conf{XferMethod} = 'tar'. # $Conf{TarIncrArgs} = '--newer=$incrDate+ $fileList+'; # # Full command to run tar for restore on the client. GNU tar is required. # This can be the same as $Conf{TarClientCmd}, with tar's -c replaced by -x # and ssh's -n removed. # # See $Conf{TarClientCmd} for full details. # # This setting only matters if $Conf{XferMethod} = "tar". # # If you want to disable direct restores using tar, you should set # $Conf{TarClientRestoreCmd} to undef and the corresponding CGI # restore option will be removed. # # Note: all Cmds are executed directly without a shell, so the prog name # needs to be a full path and you can't include shell syntax like # redirection and pipes; put that in a script if you need it. # $Conf{TarClientRestoreCmd} = '$sshPath -q -x -l root $host' . ' env LC_ALL=C $tarPath -x -p --numeric-owner --same-owner' . ' -v -f - -C $shareName+'; # # Full path for tar on the client. Security caution: normal users should not # allowed to write to this file or directory. # # This setting only matters if $Conf{XferMethod} = 'tar'. # $Conf{TarClientPath} = ''; ########################################################################### # Rsync/Rsyncd Configuration # (can be overwritten in the per-PC log file) ########################################################################### # # Path to rsync executable on the client # $Conf{RsyncClientPath} = ''; # # Full command to run rsync on the client machine. The following variables # are substituted at run-time: # # $host host name being backed up # $hostIP host's IP address # $shareName share name to backup (ie: top-level directory path) # $rsyncPath same as $Conf{RsyncClientPath} # $sshPath same as $Conf{SshPath} # $argList argument list, built from $Conf{RsyncArgs}, # $shareName, $Conf{BackupFilesExclude} and # $Conf{BackupFilesOnly} # # This setting only matters if $Conf{XferMethod} = 'rsync'. # $Conf{RsyncClientCmd} = '$sshPath -q -x -l root $host $rsyncPath $argList+'; # # Full command to run rsync for restore on the client. The following # variables are substituted at run-time: # # $host host name being backed up # $hostIP host's IP address # $shareName share name to backup (ie: top-level directory path) # $rsyncPath same as $Conf{RsyncClientPath} # $sshPath same as $Conf{SshPath} # $argList argument list, built from $Conf{RsyncArgs}, # $shareName, $Conf{BackupFilesExclude} and # $Conf{BackupFilesOnly} # # This setting only matters if $Conf{XferMethod} = 'rsync'. # # Note: all Cmds are executed directly without a shell, so the prog name # needs to be a full path and you can't include shell syntax like # redirection and pipes; put that in a script if you need it. # $Conf{RsyncClientRestoreCmd} = '$sshPath -q -x -l root $host $rsyncPath $argList+'; # # Share name to backup. For $Conf{XferMethod} = "rsync" this should # be a file system path, eg '/' or '/home'. # # For $Conf{XferMethod} = "rsyncd" this should be the name of the module # to backup (ie: the name from /etc/rsynd.conf). # # This can also be a list of multiple file system paths or modules. # For example, by adding --one-file-system to $Conf{RsyncArgs} you # can backup each file system separately, which makes restoring one # bad file system easier. In this case you would list all of the mount # points: # # $Conf{RsyncShareName} = ['/', '/var', '/data', '/boot']; # $Conf{RsyncShareName} = '/'; # # Rsync daemon port on the client, for $Conf{XferMethod} = "rsyncd". # $Conf{RsyncdClientPort} = 873; # # Rsync daemon user name on client, for $Conf{XferMethod} = "rsyncd". # The user name and password are stored on the client in whatever file # the "secrets file" parameter in rsyncd.conf points to # (eg: /etc/rsyncd.secrets). # $Conf{RsyncdUserName} = ''; # # Rsync daemon user name on client, for $Conf{XferMethod} = "rsyncd". # The user name and password are stored on the client in whatever file # the "secrets file" parameter in rsyncd.conf points to # (eg: /etc/rsyncd.secrets). # $Conf{RsyncdPasswd} = ''; # # Whether authentication is mandatory when connecting to the client's # rsyncd. By default this is on, ensuring that BackupPC will refuse to # connect to an rsyncd on the client that is not password protected. # Turn off at your own risk. # $Conf{RsyncdAuthRequired} = 1; # # When rsync checksum caching is enabled (by adding the # --checksum-seed=32761 option to $Conf{RsyncArgs}), the cached # checksums can be occasionally verified to make sure the file # contents matches the cached checksums. This is to avoid the # risk that disk problems might cause the pool file contents to # get corrupted, but the cached checksums would make BackupPC # think that the file still matches the client. # # This setting is the probability (0 means never and 1 means always) # that a file will be rechecked. Setting it to 0 means the checksums # will not be rechecked (unless there is a phase 0 failure). Setting # it to 1 (ie: 100%) means all files will be checked, but that is # not a desirable setting since you are better off simply turning # caching off (ie: remove the --checksum-seed option). # # The default of 0.01 means 1% (on average) of the files during a full # backup will have their cached checksum re-checked. # # This setting has no effect unless checksum caching is turned on. # $Conf{RsyncCsumCacheVerifyProb} = 0.01; # # Arguments to rsync for backup. Do not edit the first set unless you # have a thorough understanding of how File::RsyncP works. # $Conf{RsyncArgs} = [ # # Do not edit these! # '--numeric-ids', '--perms', '--owner', '--group', '-D', '--links', '--hard-links', '--times', '--block-size=2048', '--recursive', # # Rsync >= 2.6.3 supports the --checksum-seed option # which allows rsync checksum caching on the server. # Uncomment this to enable rsync checksum caching if # you have a recent client rsync version and you want # to enable checksum caching. # #'--checksum-seed=32761', ]; # # Additional arguments added to RsyncArgs. This can be used in # conbination with $Conf{RsyncArgs} to allow customization of # the rsync arguments on a part-client basis. The standard # arguments go in $Conf{RsyncArgs} and $Conf{RsyncArgsExtra} # can be set on a per-client basis. # # Examples of additional arguments that should work are --exclude/--include, # eg: # # $Conf{RsyncArgsExtra} = [ # '--exclude', '/proc', # '--exclude', '*.tmp', # ]; # # Both $Conf{RsyncArgs} and $Conf{RsyncArgsExtra} are subject # to the following variable substitutions: # # $client client name being backed up # $host host name (could be different from client name if # $Conf{ClientNameAlias} is set) # $hostIP IP address of host # $confDir configuration directory path # # This allows settings of the form: # # $Conf{RsyncArgsExtra} = [ # '--exclude-from=$confDir/pc/$host.exclude', # ]; # $Conf{RsyncArgsExtra} = []; # # Arguments to rsync for restore. Do not edit the first set unless you # have a thorough understanding of how File::RsyncP works. # # If you want to disable direct restores using rsync (eg: is the module # is read-only), you should set $Conf{RsyncRestoreArgs} to undef and # the corresponding CGI restore option will be removed. # # $Conf{RsyncRestoreArgs} is subject to the following variable # substitutions: # # $client client name being backed up # $host host name (could be different from client name if # $Conf{ClientNameAlias} is set) # $hostIP IP address of host # $confDir configuration directory path # # Note: $Conf{RsyncArgsExtra} doesn't apply to $Conf{RsyncRestoreArgs}. # $Conf{RsyncRestoreArgs} = [ # # Do not edit these! # '--numeric-ids', '--perms', '--owner', '--group', '-D', '--links', '--hard-links', '--times', '--block-size=2048', '--relative', '--ignore-times', '--recursive', # # Rsync >= 2.6.3 supports the --checksum-seed option # which allows rsync checksum caching on the server. # Uncomment this to enable rsync checksum caching if # you have a recent client rsync version and you want # to enable checksum caching. # #'--checksum-seed=32761', # # Add additional arguments here # ]; ########################################################################### # FTP Configuration # (can be overwritten in the per-PC log file) ########################################################################## # # Which host directories to backup when using FTP. This can be a # string or an array of strings if there are multiple shares per host. # # This value must be specified in one of two ways: either as a # subdirectory of the 'share root' on the server, or as the absolute # path of the directory. # # In the following example, if the directory /home/username is the # root share of the ftp server with the given username, the following # two values will back up the same directory: # # $Conf{FtpShareName} = 'www'; # www directory # $Conf{FtpShareName} = '/home/username/www'; # same directory # # Path resolution is not supported; i.e.; you may not have an ftp # share path defined as '../otheruser' or '~/games'. # # Multiple shares may also be specified, as with other protocols: # # $Conf{FtpShareName} = [ 'www', # 'bin', # 'config' ]; # # Note also that you can also use $Conf{BackupFilesOnly} to specify # a specific list of directories to backup. It's more efficient to # use this option instead of $Conf{FtpShareName} since a new tar is # run for each entry in $Conf{FtpShareName}. # # This setting only matters if $Conf{XferMethod} = 'ftp'. # $Conf{FtpShareName} = ''; # # FTP user name. This is used to log into the server. # # This setting is used only if $Conf{XferMethod} = 'ftp'. # $Conf{FtpUserName} = ''; # # FTP user password. This is used to log into the server. # # This setting is used only if $Conf{XferMethod} = 'ftp'. # $Conf{FtpPasswd} = ''; # # Whether passive mode is used. The correct setting depends upon # whether local or remote ports are accessible from the other machine, # which is affected by any firewall or routers between the FTP server # on the client and the BackupPC server. # # This setting is used only if $Conf{XferMethod} = 'ftp'. # $Conf{FtpPassive} = 1; # # Transfer block size. This sets the size of the amounts of data in # each frame. While undefined, this value takes the default value. # # This setting is used only if $Conf{XferMethod} = 'ftp'. # $Conf{FtpBlockSize} = 10240; # # The port of the ftp server. If undefined, 21 is used. # # This setting is used only if $Conf{XferMethod} = 'ftp'. # $Conf{FtpPort} = 21; # # Connection timeout for FTP. When undefined, the default is 120 seconds. # # This setting is used only if $Conf{XferMethod} = 'ftp'. # $Conf{FtpTimeout} = 120; # # Behaviour when BackupPC encounters symlinks on the FTP share. # # Symlinks cannot be restored via FTP, so the desired behaviour will # be different depending on the setup of the share. The default for # this behavor is 1. Directory shares with more complicated directory # structures should consider other protocols. # $Conf{FtpFollowSymlinks} = 0; ########################################################################### # Archive Configuration # (can be overwritten in the per-PC log file) ########################################################################### # # Archive Destination # # The Destination of the archive # e.g. /tmp for file archive or /dev/nst0 for device archive # $Conf{ArchiveDest} = '/tmp'; # # Archive Compression type # # The valid values are: # # - 'none': No Compression # # - 'gzip': Medium Compression. Recommended. # # - 'bzip2': High Compression but takes longer. # $Conf{ArchiveComp} = 'gzip'; # # Archive Parity Files # # The amount of Parity data to generate, as a percentage # of the archive size. # Uses the commandline par2 (par2cmdline) available from # http://parchive.sourceforge.net # # Only useful for file dumps. # # Set to 0 to disable this feature. # $Conf{ArchivePar} = 0; # # Archive Size Split # # Only for file archives. Splits the output into # the specified size * 1,000,000. # e.g. to split into 650,000,000 bytes, specify 650 below. # # If the value is 0, or if $Conf{ArchiveDest} is an existing file or # device (e.g. a streaming tape drive), this feature is disabled. # $Conf{ArchiveSplit} = 0; # # Archive Command # # This is the command that is called to actually run the archive process # for each host. The following variables are substituted at run-time: # # $Installdir The installation directory of BackupPC # $tarCreatePath The path to BackupPC_tarCreate # $splitpath The path to the split program # $parpath The path to the par2 program # $host The host to archive # $backupnumber The backup number of the host to archive # $compression The path to the compression program # $compext The extension assigned to the compression type # $splitsize The number of bytes to split archives into # $archiveloc The location to put the archive # $parfile The amount of parity data to create (percentage) # # Note: all Cmds are executed directly without a shell, so the prog name # needs to be a full path and you can't include shell syntax like # redirection and pipes; put that in a script if you need it. # $Conf{ArchiveClientCmd} = '$Installdir/bin/BackupPC_archiveHost' . ' $tarCreatePath $splitpath $parpath $host $backupnumber' . ' $compression $compext $splitsize $archiveloc $parfile *'; # # Full path for ssh. Security caution: normal users should not # allowed to write to this file or directory. # $Conf{SshPath} = ''; # # Full path for nmblookup. Security caution: normal users should not # allowed to write to this file or directory. # # nmblookup is from the Samba distribution. nmblookup is used to get the # netbios name, necessary for DHCP hosts. # $Conf{NmbLookupPath} = ''; # # NmbLookup command. Given an IP address, does an nmblookup on that # IP address. The following variables are substituted at run-time: # # $nmbLookupPath path to nmblookup ($Conf{NmbLookupPath}) # $host IP address # # This command is only used for DHCP hosts: given an IP address, this # command should try to find its NetBios name. # # Note: all Cmds are executed directly without a shell, so the prog name # needs to be a full path and you can't include shell syntax like # redirection and pipes; put that in a script if you need it. # $Conf{NmbLookupCmd} = '$nmbLookupPath -A $host'; # # NmbLookup command. Given a netbios name, finds that host by doing # a NetBios lookup. Several variables are substituted at run-time: # # $nmbLookupPath path to nmblookup ($Conf{NmbLookupPath}) # $host NetBios name # # In some cases you might need to change the broadcast address, for # example if nmblookup uses 192.168.255.255 by default and you find # that doesn't work, try 192.168.1.255 (or your equivalent class C # address) using the -B option: # # $Conf{NmbLookupFindHostCmd} = '$nmbLookupPath -B 192.168.1.255 $host'; # # If you use a WINS server and your machines don't respond to # multicast NetBios requests you can use this (replace 1.2.3.4 # with the IP address of your WINS server): # # $Conf{NmbLookupFindHostCmd} = '$nmbLookupPath -R -U 1.2.3.4 $host'; # # This is preferred over multicast since it minimizes network traffic. # # Experiment manually for your site to see what form of nmblookup command # works. # # Note: all Cmds are executed directly without a shell, so the prog name # needs to be a full path and you can't include shell syntax like # redirection and pipes; put that in a script if you need it. # $Conf{NmbLookupFindHostCmd} = '$nmbLookupPath $host'; # # For fixed IP address hosts, BackupPC_dump can also verify the netbios # name to ensure it matches the host name. An error is generated if # they do not match. Typically this flag is off. But if you are going # to transition a bunch of machines from fixed host addresses to DHCP, # setting this flag is a great way to verify that the machines have # their netbios name set correctly before turning on DCHP. # $Conf{FixedIPNetBiosNameCheck} = 0; # # Full path to the ping command. Security caution: normal users # should not be allowed to write to this file or directory. # # If you want to disable ping checking, set this to some program # that exits with 0 status, eg: # # $Conf{PingPath} = '/bin/echo'; # $Conf{PingPath} = ''; # # Ping command. The following variables are substituted at run-time: # # $pingPath path to ping ($Conf{PingPath}) # $host host name # # Wade Brown reports that on solaris 2.6 and 2.7 ping -s returns the wrong # exit status (0 even on failure). Replace with "ping $host 1", which # gets the correct exit status but we don't get the round-trip time. # # Note: all Cmds are executed directly without a shell, so the prog name # needs to be a full path and you can't include shell syntax like # redirection and pipes; put that in a script if you need it. # $Conf{PingCmd} = '$pingPath -c 1 $host'; # # Maximum round-trip ping time in milliseconds. This threshold is set # to avoid backing up PCs that are remotely connected through WAN or # dialup connections. The output from ping -s (assuming it is supported # on your system) is used to check the round-trip packet time. On your # local LAN round-trip times should be much less than 20msec. On most # WAN or dialup connections the round-trip time will be typically more # than 20msec. Tune if necessary. # $Conf{PingMaxMsec} = 20; # # Compression level to use on files. 0 means no compression. Compression # levels can be from 1 (least cpu time, slightly worse compression) to # 9 (most cpu time, slightly better compression). The recommended value # is 3. Changing to 5, for example, will take maybe 20% more cpu time # and will get another 2-3% additional compression. See the zlib # documentation for more information about compression levels. # # Changing compression on or off after backups have already been done # will require both compressed and uncompressed pool files to be stored. # This will increase the pool storage requirements, at least until all # the old backups expire and are deleted. # # It is ok to change the compression value (from one non-zero value to # another non-zero value) after dumps are already done. Since BackupPC # matches pool files by comparing the uncompressed versions, it will still # correctly match new incoming files against existing pool files. The # new compression level will take effect only for new files that are # newly compressed and added to the pool. # # If compression was off and you are enabling compression for the first # time you can use the BackupPC_compressPool utility to compress the # pool. This avoids having the pool grow to accommodate both compressed # and uncompressed backups. See the documentation for more information. # # Note: compression needs the Compress::Zlib perl library. If the # Compress::Zlib library can't be found then $Conf{CompressLevel} is # forced to 0 (compression off). # $Conf{CompressLevel} = 0; # # Timeout in seconds when listening for the transport program's # (smbclient, tar etc) stdout. If no output is received during this # time, then it is assumed that something has wedged during a backup, # and the backup is terminated. # # Note that stdout buffering combined with huge files being backed up # could cause longish delays in the output from smbclient that # BackupPC_dump sees, so in rare cases you might want to increase # this value. # # Despite the name, this parameter sets the timeout for all transport # methods (tar, smb etc). # $Conf{ClientTimeout} = 72000; # # Maximum number of log files we keep around in each PC's directory # (ie: pc/$host). These files are aged monthly. A setting of 12 # means there will be at most the files LOG, LOG.0, LOG.1, ... LOG.11 # in the pc/$host directory (ie: about a years worth). (Except this # month's LOG, these files will have a .z extension if compression # is on). # # If you decrease this number after BackupPC has been running for a # while you will have to manually remove the older log files. # $Conf{MaxOldPerPCLogFiles} = 12; # # Optional commands to run before and after dumps and restores, # and also before and after each share of a dump. # # Stdout from these commands will be written to the Xfer (or Restore) # log file. One example of using these commands would be to # shut down and restart a database server, dump a database # to files for backup, or doing a snapshot of a share prior # to a backup. Example: # # $Conf{DumpPreUserCmd} = '$sshPath -q -x -l root $host /usr/bin/dumpMysql'; # # The following variable substitutions are made at run time for # $Conf{DumpPreUserCmd}, $Conf{DumpPostUserCmd}, $Conf{DumpPreShareCmd} # and $Conf{DumpPostShareCmd}: # # $type type of dump (incr or full) # $xferOK 1 if the dump succeeded, 0 if it didn't # $client client name being backed up # $host host name (could be different from client name if # $Conf{ClientNameAlias} is set) # $hostIP IP address of host # $user user name from the hosts file # $moreUsers list of additional users from the hosts file # $share the first share name (or current share for # $Conf{DumpPreShareCmd} and $Conf{DumpPostShareCmd}) # $shares list of all the share names # $XferMethod value of $Conf{XferMethod} (eg: tar, rsync, smb) # $sshPath value of $Conf{SshPath}, # $cmdType set to DumpPreUserCmd or DumpPostUserCmd # # The following variable substitutions are made at run time for # $Conf{RestorePreUserCmd} and $Conf{RestorePostUserCmd}: # # $client client name being backed up # $xferOK 1 if the restore succeeded, 0 if it didn't # $host host name (could be different from client name if # $Conf{ClientNameAlias} is set) # $hostIP IP address of host # $user user name from the hosts file # $moreUsers list of additional users from the hosts file # $share the first share name # $XferMethod value of $Conf{XferMethod} (eg: tar, rsync, smb) # $sshPath value of $Conf{SshPath}, # $type set to "restore" # $bkupSrcHost host name of the restore source # $bkupSrcShare share name of the restore source # $bkupSrcNum backup number of the restore source # $pathHdrSrc common starting path of restore source # $pathHdrDest common starting path of destination # $fileList list of files being restored # $cmdType set to RestorePreUserCmd or RestorePostUserCmd # # The following variable substitutions are made at run time for # $Conf{ArchivePreUserCmd} and $Conf{ArchivePostUserCmd}: # # $client client name being backed up # $xferOK 1 if the archive succeeded, 0 if it didn't # $host Name of the archive host # $user user name from the hosts file # $share the first share name # $XferMethod value of $Conf{XferMethod} (eg: tar, rsync, smb) # $HostList list of hosts being archived # $BackupList list of backup numbers for the hosts being archived # $archiveloc location where the archive is sent to # $parfile amount of parity data being generated (percentage) # $compression compression program being used (eg: cat, gzip, bzip2) # $compext extension used for compression type (eg: raw, gz, bz2) # $splitsize size of the files that the archive creates # $sshPath value of $Conf{SshPath}, # $type set to "archive" # $cmdType set to ArchivePreUserCmd or ArchivePostUserCmd # # Note: all Cmds are executed directly without a shell, so the prog name # needs to be a full path and you can't include shell syntax like # redirection and pipes; put that in a script if you need it. # $Conf{DumpPreUserCmd} = undef; $Conf{DumpPostUserCmd} = undef; $Conf{DumpPreShareCmd} = undef; $Conf{DumpPostShareCmd} = undef; $Conf{RestorePreUserCmd} = undef; $Conf{RestorePostUserCmd} = undef; $Conf{ArchivePreUserCmd} = undef; $Conf{ArchivePostUserCmd} = undef; # # Whether the exit status of each PreUserCmd and # PostUserCmd is checked. # # If set and the Dump/Restore/Archive Pre/Post UserCmd # returns a non-zero exit status then the dump/restore/archive # is aborted. To maintain backward compatibility (where # the exit status in early versions was always ignored), # this flag defaults to 0. # # If this flag is set and the Dump/Restore/Archive PreUserCmd # fails then the matching Dump/Restore/Archive PostUserCmd is # not executed. If DumpPreShareCmd returns a non-exit status, # then DumpPostShareCmd is not executed, but the DumpPostUserCmd # is still run (since DumpPreUserCmd must have previously # succeeded). # # An example of a DumpPreUserCmd that might fail is a script # that snapshots or dumps a database which fails because # of some database error. # $Conf{UserCmdCheckStatus} = 0; # # Override the client's host name. This allows multiple clients # to all refer to the same physical host. This should only be # set in the per-PC config file and is only used by BackupPC at # the last moment prior to generating the command used to backup # that machine (ie: the value of $Conf{ClientNameAlias} is invisible # everywhere else in BackupPC). The setting can be a host name or # IP address, eg: # # $Conf{ClientNameAlias} = 'realHostName'; # $Conf{ClientNameAlias} = '192.1.1.15'; # # will cause the relevant smb/tar/rsync backup/restore commands to be # directed to realHostName, not the client name. # # Note: this setting doesn't work for hosts with DHCP set to 1. # $Conf{ClientNameAlias} = undef; ########################################################################### # Email reminders, status and messages # (can be overridden in the per-PC config.pl) ########################################################################### # # Full path to the sendmail command. Security caution: normal users # should not allowed to write to this file or directory. # $Conf{SendmailPath} = ''; # # Minimum period between consecutive emails to a single user. # This tries to keep annoying email to users to a reasonable # level. Email checks are done nightly, so this number is effectively # rounded up (ie: 2.5 means a user will never receive email more # than once every 3 days). # $Conf{EMailNotifyMinDays} = 2.5; # # Name to use as the "from" name for email. Depending upon your mail # handler this is either a plain name (eg: "admin") or a fully-qualified # name (eg: "admin@mydomain.com"). # $Conf{EMailFromUserName} = ''; # # Destination address to an administrative user who will receive a # nightly email with warnings and errors. If there are no warnings # or errors then no email will be sent. Depending upon your mail # handler this is either a plain name (eg: "admin") or a fully-qualified # name (eg: "admin@mydomain.com"). # $Conf{EMailAdminUserName} = ''; # # Destination domain name for email sent to users. By default # this is empty, meaning email is sent to plain, unqualified # addresses. Otherwise, set it to the destintation domain, eg: # # $Cong{EMailUserDestDomain} = '@mydomain.com'; # # With this setting user email will be set to 'user@mydomain.com'. # $Conf{EMailUserDestDomain} = ''; # # This subject and message is sent to a user if their PC has never been # backed up. # # These values are language-dependent. The default versions can be # found in the language file (eg: lib/BackupPC/Lang/en.pm). If you # need to change the message, copy it here and edit it, eg: # # $Conf{EMailNoBackupEverMesg} = <<'EOF'; # To: $user$domain # cc: # Subject: $subj # # Dear $userName, # # This is a site-specific email message. # EOF # $Conf{EMailNoBackupEverSubj} = undef; $Conf{EMailNoBackupEverMesg} = undef; # # How old the most recent backup has to be before notifying user. # When there have been no backups in this number of days the user # is sent an email. # $Conf{EMailNotifyOldBackupDays} = 7.0; # # This subject and message is sent to a user if their PC has not recently # been backed up (ie: more than $Conf{EMailNotifyOldBackupDays} days ago). # # These values are language-dependent. The default versions can be # found in the language file (eg: lib/BackupPC/Lang/en.pm). If you # need to change the message, copy it here and edit it, eg: # # $Conf{EMailNoBackupRecentMesg} = <<'EOF'; # To: $user$domain # cc: # Subject: $subj # # Dear $userName, # # This is a site-specific email message. # EOF # $Conf{EMailNoBackupRecentSubj} = undef; $Conf{EMailNoBackupRecentMesg} = undef; # # How old the most recent backup of Outlook files has to be before # notifying user. # $Conf{EMailNotifyOldOutlookDays} = 5.0; # # This subject and message is sent to a user if their Outlook files have # not recently been backed up (ie: more than $Conf{EMailNotifyOldOutlookDays} # days ago). # # These values are language-dependent. The default versions can be # found in the language file (eg: lib/BackupPC/Lang/en.pm). If you # need to change the message, copy it here and edit it, eg: # # $Conf{EMailOutlookBackupMesg} = <<'EOF'; # To: $user$domain # cc: # Subject: $subj # # Dear $userName, # # This is a site-specific email message. # EOF # $Conf{EMailOutlookBackupSubj} = undef; $Conf{EMailOutlookBackupMesg} = undef; # # Additional email headers. This sets to charset to # utf8. # $Conf{EMailHeaders} = < administrative users are the union of group admin, plus # craig and celia. # # $Conf{CgiAdminUserGroup} = ''; # $Conf{CgiAdminUsers} = 'craig celia'; # --> administrative users are only craig and celia'. # $Conf{CgiAdminUserGroup} = ''; $Conf{CgiAdminUsers} = ''; # # URL of the BackupPC_Admin CGI script. Used for email messages. # $Conf{CgiURL} = undef; # # Language to use. See lib/BackupPC/Lang for the list of supported # languages, which include English (en), French (fr), Spanish (es), # German (de), Italian (it), Dutch (nl), Polish (pl), Portuguese # Brazillian (pt_br) and Chinese (zh_CH). # # Currently the Language setting applies to the CGI interface and email # messages sent to users. Log files and other text are still in English. # $Conf{Language} = 'en'; # # User names that are rendered by the CGI interface can be turned # into links into their home page or other information about the # user. To set this up you need to create two sprintf() strings, # that each contain a single '%s' that will be replaced by the user # name. The default is a mailto: link. # # $Conf{CgiUserHomePageCheck} should be an absolute file path that # is used to check (via "-f") that the user has a valid home page. # Set this to undef or an empty string to turn off this check. # # $Conf{CgiUserUrlCreate} should be a full URL that points to the # user's home page. Set this to undef or an empty string to turn # off generation of URLs for user names. # # Example: # $Conf{CgiUserHomePageCheck} = '/var/www/html/users/%s.html'; # $Conf{CgiUserUrlCreate} = 'http://myhost/users/%s.html'; # --> if /var/www/html/users/craig.html exists, then 'craig' will # be rendered as a link to http://myhost/users/craig.html. # $Conf{CgiUserHomePageCheck} = ''; $Conf{CgiUserUrlCreate} = 'mailto:%s'; # # Date display format for CGI interface. A value of 1 uses US-style # dates (MM/DD), a value of 2 uses full YYYY-MM-DD format, and zero # for international dates (DD/MM). # $Conf{CgiDateFormatMMDD} = 1; # # If set, the complete list of hosts appears in the left navigation # bar pull-down for administrators. Otherwise, just the hosts for which # the user is listed in the host file (as either the user or in moreUsers) # are displayed. # $Conf{CgiNavBarAdminAllHosts} = 1; # # Enable/disable the search box in the navigation bar. # $Conf{CgiSearchBoxEnable} = 1; # # Additional navigation bar links. These appear for both regular users # and administrators. This is a list of hashes giving the link (URL) # and the text (name) for the link. Specifying lname instead of name # uses the language specific string (ie: $Lang->{lname}) instead of # just literally displaying name. # $Conf{CgiNavBarLinks} = [ { link => "?action=view&type=docs", lname => "Documentation", # actually displays $Lang->{Documentation} }, { link => "http://backuppc.wiki.sourceforge.net", name => "Wiki", # displays literal "Wiki" }, { link => "http://backuppc.sourceforge.net", name => "SourceForge", # displays literal "SourceForge" }, ]; # # Hilight colors based on status that are used in the PC summary page. # $Conf{CgiStatusHilightColor} = { Reason_backup_failed => '#ffcccc', Reason_backup_done => '#ccffcc', Reason_no_ping => '#ffff99', Reason_backup_canceled_by_user => '#ff9900', Status_backup_in_progress => '#66cc99', Disabled_OnlyManualBackups => '#d1d1d1', Disabled_AllBackupsDisabled => '#d1d1d1', }; # # Additional CGI header text. # $Conf{CgiHeaders} = ''; # # Directory where images are stored. This directory should be below # Apache's DocumentRoot. This value isn't used by BackupPC but is # used by configure.pl when you upgrade BackupPC. # # Example: # $Conf{CgiImageDir} = '/var/www/htdocs/BackupPC'; # $Conf{CgiImageDir} = ''; # # Additional mappings of file name extenions to Content-Type for # individual file restore. See $Ext2ContentType in BackupPC_Admin # for the default setting. You can add additional settings here, # or override any default settings. Example: # # $Conf{CgiExt2ContentType} = { # 'pl' => 'text/plain', # }; # $Conf{CgiExt2ContentType} = { }; # # URL (without the leading http://host) for BackupPC's image directory. # The CGI script uses this value to serve up image files. # # Example: # $Conf{CgiImageDirURL} = '/BackupPC'; # $Conf{CgiImageDirURL} = ''; # # CSS stylesheet "skin" for the CGI interface. It is stored # in the $Conf{CgiImageDir} directory and accessed via the # $Conf{CgiImageDirURL} URL. # # For BackupPC v3.x several color, layout and font changes were made. # The previous v2.x version is available as BackupPC_stnd_orig.css, so # if you prefer the old skin, change this to BackupPC_stnd_orig.css. # $Conf{CgiCSSFile} = 'BackupPC_stnd.css'; # # Whether the user is allowed to edit their per-PC config. # $Conf{CgiUserConfigEditEnable} = 1; # # Which per-host config variables a non-admin user is allowed # to edit. Admin users can edit all per-host config variables, # even if disabled in this list. # # SECURITY WARNING: Do not let users edit any of the Cmd # config variables! That's because a user could set a # Cmd to a shell script of their choice and it will be # run as the BackupPC user. That script could do all # sorts of bad things. # $Conf{CgiUserConfigEdit} = { FullPeriod => 1, IncrPeriod => 1, FullKeepCnt => 1, FullKeepCntMin => 1, FullAgeMax => 1, IncrKeepCnt => 1, IncrKeepCntMin => 1, IncrAgeMax => 1, IncrLevels => 1, IncrFill => 1, PartialAgeMax => 1, RestoreInfoKeepCnt => 1, ArchiveInfoKeepCnt => 1, BackupFilesOnly => 1, BackupFilesExclude => 1, BackupsDisable => 1, BlackoutBadPingLimit => 1, BlackoutGoodCnt => 1, BlackoutPeriods => 1, BackupZeroFilesIsFatal => 1, ClientCharset => 1, ClientCharsetLegacy => 1, XferMethod => 1, XferLogLevel => 1, SmbShareName => 1, SmbShareUserName => 1, SmbSharePasswd => 1, SmbClientFullCmd => 0, SmbClientIncrCmd => 0, SmbClientRestoreCmd => 0, TarShareName => 1, TarFullArgs => 1, TarIncrArgs => 1, TarClientCmd => 0, TarClientRestoreCmd => 0, TarClientPath => 0, RsyncShareName => 1, RsyncdClientPort => 1, RsyncdPasswd => 1, RsyncdUserName => 1, RsyncdAuthRequired => 1, RsyncCsumCacheVerifyProb => 1, RsyncArgs => 1, RsyncArgsExtra => 1, RsyncRestoreArgs => 1, RsyncClientCmd => 0, RsyncClientRestoreCmd => 0, RsyncClientPath => 0, FtpShareName => 1, FtpUserName => 1, FtpPasswd => 1, FtpBlockSize => 1, FtpPort => 1, FtpTimeout => 1, FtpFollowSymlinks => 1, FtpRestoreEnabled => 1, ArchiveDest => 1, ArchiveComp => 1, ArchivePar => 1, ArchiveSplit => 1, ArchiveClientCmd => 0, FixedIPNetBiosNameCheck => 1, NmbLookupCmd => 0, NmbLookupFindHostCmd => 0, PingMaxMsec => 1, PingCmd => 0, ClientTimeout => 1, MaxOldPerPCLogFiles => 1, CompressLevel => 1, ClientNameAlias => 1, DumpPreUserCmd => 0, DumpPostUserCmd => 0, RestorePreUserCmd => 0, RestorePostUserCmd => 0, ArchivePreUserCmd => 0, ArchivePostUserCmd => 0, DumpPostShareCmd => 0, DumpPreShareCmd => 0, UserCmdCheckStatus => 0, EMailNotifyMinDays => 1, EMailFromUserName => 1, EMailAdminUserName => 1, EMailUserDestDomain => 1, EMailNoBackupEverSubj => 1, EMailNoBackupEverMesg => 1, EMailNotifyOldBackupDays => 1, EMailNoBackupRecentSubj => 1, EMailNoBackupRecentMesg => 1, EMailNotifyOldOutlookDays => 1, EMailOutlookBackupSubj => 1, EMailOutlookBackupMesg => 1, EMailHeaders => 1, }; # XXX XXX XXX XXX XXX XXX XXX # XXX support for search # add search database dsn # #$Conf{SearchDSN} = 'dbi:SQLite:dbname=$TopDir/search.db'; $Conf{SearchDSN} = 'dbi:Pg:dbname=backuppc'; $Conf{SearchUser} = 'dpavlin'; # # if you want to use experimental Hyper Estraier support (which require # installation of Search::Estraier perl module from CPAN) select # path to index (relative to $TopDir) or node URI # use following line to disable Hyper Estraier and prevent upgrades # from overwriting it #$Conf{SearchModule} = 'BackupPC::Search::Estraier'; #$Conf{HyperEstraierIndex} = 'http://localhost:1978/node/backuppc'; # which search engine to use $Conf{SearchModule} = 'BackupPC::Search::KinoSearch'; $Conf{KinoPath} = '/tmp/kinosearch'; # # temp directory for storing gzip and iso files when createing iso images # $Conf{GzipTempDir} = "$Conf{TopDir}/temp"; # # nameing schema for snapshots (.tar.gz will be added) # \h - hostname # \s - share # \n - increment numer # $Conf{GzipSchema} = '\\h_\\s_\\n'; # # # archive media size (in bytes) # default: 4.2Gb for DVD # #$Conf{ArchiveMediaSize} = 4200 * 1024 * 1024; # # maximum size of one (uncompressed) file on archive medium (in bytes) # default: 2Gb - 2k for DVD #$Conf{ArchiveChunkSize} = (2048 - 2) * 1024 * 1024; # # Temporary directory for ISO images (relative to install dir) # $Conf{ISOTempDir} = 'temp/iso'; #### # configuration data for burning #### #$Conf{CDRecordBin} = 'cdrecord'; #$Conf{CDRecordOpts} = 'dev=/dev/hdc blank=fast -dao -v -eject -dummy'; #$Conf{CDRecordBin} = 'dvdrecord'; #$Conf{CDRecordOpts} = 'dev=0,0,0 -dao -v -eject -dummy'; # gzip level for creating tar.gz increments # default is -6, -1 is fast, -9 is slow #$Conf{GzipLevel} = '-6'; $Conf{GzipLevel} = '-1'; # number of archive copies to burn $Conf{BurnMultipleCopies} = 2; # Other command-line utilities used #$Conf{ejectBin} = 'eject'; #$Conf{ejectOpts} = '/dev/cdrom'; $Conf{ejectBin} = 'true'; $Conf{ejectOpts} = ' '; # FIXME disable burning $Conf{ejectBin} = 'true'; $Conf{ejectOpts} = ' '; $Conf{CDRecordBin} = 'cat'; $Conf{CDRecordOpts} = '>/dev/null <'; $Conf{mkisofsBin} = 'mkisofs'; # temporary path used when recovering of increments # (you might put this into tmpfs if you have enough RAM) $Conf{IncrementTempDir} = '/tmp/increment-restore/';