+* Added Suse notes to init.d/README from Bruno Vernay.
+
+* Added Apache 2 documentation fix from Michael Tuzi.
+
+#------------------------------------------------------------------------
+# Version 2.0.2, 6 Oct 2003
+#------------------------------------------------------------------------
+
+* Fixed stupid last-minute change in octal size conversion in
+ Backup_tarExtract.
+
+#-----------------------------------------------------------------------
+# Version 2.0.1, 5 Oct 2003
+#------------------------------------------------------------------------
+
+* Fixed handling of >= 8GB files in BackupPC_tarExtract and >= 4GB
+ files in BackupPC_tarCreate.
+
+* Removed smbclient size repair in BackupPC_tarExtract for files
+ between 2GB and 4GB. This means that BackupPC_tarExtract 2.0.1
+ doesn't behave the same as 2.0.0 for file sizes between 2GB and 4GB
+ extacted using smbclient 2.2.x. If you have problems backing up
+ files whose size is between 2GB and 4GB using smbclient 2.2.x
+ you should upgrade smbclient to 3.0, since it now generates
+ correct file sizes.
+
+* Replace PingClientPath with PingPath in configure.pl.
+
+* Removed -T (taint mode) on binaries installed in configure.pl.
+
+* Added support for smbclient from samba version 3.0.0.
+
+* Fixed $Conf{HardLinkMax} limit check in BackupPC::Lib; reported
+ by Ross Skaliotis.
+
+* In BackupPC_Admin, default REMOTE_USER to $Conf{BackupPCUser}
+ if it is not defined. This allows the CGI interface to work
+ when AdminUsers = '*'. Reported by Quentin Arce.
+
+* For SMB, code that detected files with a read-locked region (eg:
+ outlook .pst files), removed them and then tried to link with an
+ earlier version was broken. This code missed a step of mangling
+ the file names. This is now fixed. Reported by Pierre Bourgin.
+
+* A backup of a share that has zero files is now considered
+ fatal. This is used to catch miscellaneous Xfer errors that
+ result in no files being backed up. A new config parameter
+ $Conf{BackupZeroFilesIsFatal} (defaults to 1) and can be set to
+ zero to turn off this check. Suggested by Guillaume Filion.
+ Additional change: this check only applies to a full dump.
+
+* SMB: now detect NT_STATUS_ACCESS_DENIED on entire share or BackupFilesOnly
+ (also ERRDOS - ERRnoaccess (Access denied.) for older versions of
+ smbclient.) Suggested by Guillaume Filion.
+
+* SMB: now detects "tree connect failed: NT_STATUS_BAD_NETWORK_NAME" and
+ the dump is considered failed.
+
+* Rsync: Previously BackupFilesOnly = '/' did --include '/' --exclude '/*',
+ which just included the '/' directory and nothing below. Now it
+ does just --include '/', which should include everything.
+ Reported by denon.
+
+* Add hostError to DumpPostUserCmd variable substitutions for both dump
+ and restore.
+
+* Verbose output in Lib.pm goes to STDERR, not STDOUT. This now
+ makes BackupPC_dump -v work better.
+
+* Don't allow browsing with ".." in directory in case a user tries
+ to trick BackupPC_Admin into displaying directories outside where
+ they are allowed.
+
+* Required File::RsyncP version is now 0.44, since File::RsyncP 0.44
+ fixes large file (>2GB) bugs. Large file bugs reported by Steve
+ Waltner.
+
+#------------------------------------------------------------------------
+# Version 2.0.0, 14 Jun 2003
+#------------------------------------------------------------------------
+
+* Minor tweaks to disable utf8 on utf8-capable machines (eg: RH8+).
+ Added "no utf8" to all programs, and added binmode() to relevant
+ file handles.
+
+#------------------------------------------------------------------------
+# Version 2.0.0beta3, 1 Jun 2003
+#------------------------------------------------------------------------
+
+* Several improvements to restore: cancel now reports the correct
+ message and cleans up correctly.
+
+* Rsync with whitespace and wildcard excludes fixed by replacing
+ argList with argList+ in config.pl plus a fix to Lib.pm for
+ shell escaping array arguments.
+
+* Fixed rsync restore for character and block special devices
+ (major and minor device numbers weren't correctly restored).
+
+* Fixed typo in bin/BackupPC_restore (XferLOG -> RestoreLOG).
+
+* (Re)-fixed "Bad command" in log file when restore via tar or zip
+ file download is done.
+
+* Added untaint to exec in Lib.pm to avoid tainted errors.
+
+* Applied additional tweak to hilight patch from Tim Demarest.
+
+* $Conf{CgiAdminUsers} = '*' now allows privileged even with REMOTE_USER
+ not set.
+
+* Don't display RsyncdPasswd when displaying config.pl files.
+
+* Replace pipe with socketpair in bin/BackupPC_dump and bin/BackupPC_restore,
+ which increases typical buffering from 4K to 16K-64K. This improves the
+ performance.
+
+* Add check on $ENV{LANG} setting do configure.pl: if LANG includes utf
+ then a warning is printed.
+
+#------------------------------------------------------------------------
+# Version 2.0.0beta2, 11 May 2003
+#------------------------------------------------------------------------
+
+* Added German translation, provided by Manfred Herrmann.
+
+* Fixed large-file problem with rsync, reported by Manfred Herrmann.
+
+* Fixed zip and tar file download from CGI under mod_perl. Reported
+ by Pierre Bourgin and Paul Lukins.
+
+* Fixed directory browsing and top-level directory browsing in 2.0.0beta0.
+ Reported by several users.
+
+* Added -v option to BackupPC_dump for verbose output (useful when
+ you run the command manually). Added messages for all exits.
+
+* If nmblookup returns multiple IP addresses, NetBiosHostIPFind()
+ now returns the first IP address that matches the subnet mask.
+ Suggested by Tim Demarest.
+
+* Fixed BackupPC::View so the top-level directory is handled correctly.
+ This allows the top-level share/directory to be restored via the
+ CGI interface. Reported by several users.
+
+* Fixed RsyncFileIO failures on certain large files by replacing seek()
+ with sysseek(). Reported by Manfred Herrmann.
+
+* Added configurable highlighting of PC status in the CGI summary
+ screen; submitted by Tim Demarest.
+
+* Fixed command queue CGI display; submitted by Tim Demarest.
+
+* BackupPC_trashClean now logs an error if it can't remove all the
+ trash and then goes back to sleep, rather than continually trying.
+
+* Moved correct user (uid) check into BackupPC::Lib so that all
+ applications do a user check if $Cong{BackupPCUserVerify} is
+ set. The avoids the risk of manually running BackupPC_dump as
+ the wrong user.
+
+* Loss of blackout now applies to "host not found" as well as no ping.
+ Reported by Dale Renton.
+
+* "Host not found" is now treated in a similar manner to "no ping".
+
+* Added suse-linux init.d script from Leon Letto.
+
+* Added Gentoo linux init.d script from Tim Demarest.
+
+* Applied additional i18n strings from GFK and the translation team.
+
+* Fixed option parsing so that getopts errors are reported and we exit.
+
+* Changed reporting of Xfer PIDs so that rsync cancel works correctly.
+
+#------------------------------------------------------------------------
+# Version 2.0.0beta1, 30 Mar 2003
+#------------------------------------------------------------------------
+
+* Added Spanish translation es.pm from Javier Gonzalez.
+
+* Fixed CGI browse navigation bug that causes BackupPC_Admin to wedge
+ when directories were selected in a certain order.
+
+* Fixed BackupPC::PoolWrite so that it can recover when the initial
+ file size is wrong. This is needed since rsync could write a file
+ whose size is different from the initial size returned in the
+ file list when that file is updated while rsync is running.
+
+* Added binmode(STDIN) to BackupPC_tarExtract, suggested by Pat LoPresti
+ to fix a problem a RedHat8 with perl 5.8.0. It's unclear why this
+ helps, but it should be benign. See:
+ http://sourceforge.net/mailarchive/forum.php?thread_id=1853018&forum_id=503
+
+#------------------------------------------------------------------------
+# Version 2.0.0beta0, 23 Feb 2003
+#------------------------------------------------------------------------
+
+* Support for rsync and rsyncd backup and restore. Changes to
+ BackupPC_dump, BackupPC_restore, and new modules BackupPC::Xfer::Rsync
+ and BackupPC::Xfer::RsyncFileIO.
+
+* Added internationalization (i18n) code from Xavier Nicollet,
+ with additions from Guillaume Filion. Voila! BackupPC_Admin
+ now supports English and French, and adding more languages is
+ now easy. New config paramater $Conf{Language} sets the language.
+
+* Added optional user-defined pre/post dump/restore commands, allowing
+ things like database shutdown/startup for dumps.
+
+* Changed the way hosts are found.
+
+* Added $Conf{ClientNameAlias}, which allows the name of the physical
+ client machine to be set. This allows several different backup
+ "hosts" to all refer to the same physical machine, which is
+ convenient if several different types of data need to be backed
+ up, or if different parameters are needed for different parts of
+ the host.
+
+* Replaced $Conf{PingArgs} with $Conf{PingCmd}, added $Conf{DfCmd},
+ $Conf{NmbLookupCmd} allowing all these commands to be fully
+ configured. Also, all commands can also now be fragments of
+ perl code.
+
+* Moved all smbclient commands into the config.pl file so the specific
+ arguments can be customized. New config parameters are
+ $Conf{SmbClientFullCmd}, $Conf{SmbClientIncrCmd} and
+ $Conf{SmbClientRestoreCmd}.
+
+* Added new BackupPC::View module that creates views of backups
+ (handling merging etc). Updated BackupPC_Admin, BackupPC_zipCreate
+ and BackupPC_tarCreate to use BackupPC::View. This removes lots
+ of merging and mangling code from the higher-level code.
+
+* Added code from Toby Johnson that allows additional users to be