$Conf{SmbClientPath} = '/usr/bin/smbclient';
#
-# Additional optional arguments to smbclient.
-#
-# Some users have reported that the -b option can be used to improve
-# performance of smbclient. The default value is 4096, and if you
-# find smbclient has low throughput you might try a value of 2048, eg:
+# Commands to run smbclient for a full dump, incremental dump or a restore.
+# This setting only matters if $Conf{XferMethod} = 'smb'.
#
-# $Conf{SmbClientArgs} = '-b 2048';
+# Several variables are substituted at run-time:
#
-# This setting only matters if $Conf{XferMethod} = 'smb'.
+# $smbClientPath same as $Conf{SmbClientPath}
+# $host host to backup/restore
+# $hostIP host IP address
+# $shareName share name
+# $userName user name
+# $fileList list of files to backup (based on exclude/include)
+# $I_option optional -I option to smbclient
+# $X_option exclude option (if $fileList is an exclude list)
+# $timeStampFile start time for incremental dump
#
-$Conf{SmbClientArgs} = '';
+$Conf{SmbClientFullCmd} = '$smbClientPath \\\\$host\\$shareName'
+ . '$I_option -U $userName -E -N -d 1'
+ . ' -c tarmode\\ full -Tc$X_option - $fileList';
+
+$Conf{SmbClientIncrCmd} = '$smbClientPath \\\\$host\\$shareName'
+ . '$I_option -U $userName -E -N -d 1'
+ . ' -c tarmode\\ full -TcN$X_option $timeStampFile - $fileList';
+
+$Conf{SmbClientRestoreCmd} = '$smbClientPath \\\\$host\\$shareName'
+ . '$I_option -U $userName -E -N -d 1'
+ . ' -c tarmode\\ full -Tx -';
#
# Full command to run tar on the client. GNU tar is required. You will
$Conf{NmbLookupPath} = '/usr/bin/nmblookup';
#
-# NmbLookup command. Several variables are substituted at run-time:
+# NmbLookup command. Given an IP address, does an nmblookup on that
+# IP address. Several variables are substituted at run-time:
#
# $nmbLookupPath path to nmblookup ($Conf{NmbLookupPath})
# $host host name
#
$Conf{NmbLookupCmd} = '$nmbLookupPath -A $host';
+#
+# NmbLookup command. Given a netbios name, finds that host by doing
+# a NetBios multicast. Several variables are substituted at run-time:
+#
+# $nmbLookupPath path to nmblookup ($Conf{NmbLookupPath})
+# $host NetBios name
+#
+# In some cases you might need to change the broadcast address, for
+# example if nmblookup uses 192.168.255.255 by default and you find
+# that doesn't work, try 192.168.1.255 (or your equivalent class C
+# address) using the -B option:
+#
+# $Conf{NmbLookupFindHostCmd} = '$nmbLookupPath -B 192.168.1.255 $host';
+#
+$Conf{NmbLookupFindHostCmd} = '$nmbLookupPath $host';
+
#
# For fixed IP address hosts, BackupPC_dump can also verify the netbios
# name to ensure it matches the host name. An error is generated if
$Conf{RestorePreUserCmd} = undef;
$Conf{RestorePostUserCmd} = undef;
+#
+# Override the client's host name. This allows multiple clients
+# to all refer to the same physical hosts. This should only be
+# set in the per-PC config file.
+#
+$Conf{ClientNameAlias} = undef;
+
#
# Advanced option for asking BackupPC to load additional perl modules.
# Can be a list (array ref) of module names to load at startup.
$Conf{EMailAdminUserName} = '';
#
-# This message is sent to a user if their PC has never been backed up.
-# If your mailer needs a fully-qualified To name, then change "$user"
-# to "$user@mydomain.com" in the template, eg:
+# Destination domain name for email sent to users. By default
+# this is empty, meaning email is sent to plain, unqualified
+# addresses. Otherwise, set it to the destintation domain, eg:
#
-# To: $user@mydomain.com
+# $Cong{EMailUserDestDomain} = '@mydomain.com';
#
-$Conf{EMailNoBackupEverMesg} = <<'EOF';
-To: $user
-cc:
-Subject: $subj
-
-Dear $userName,
-
-Your PC ($host) has never been successfully backed up by our
-PC backup software. PC backups should occur automatically
-when your PC is connected to the network. You should contact
-computer support if:
-
- - Your PC has been regularly connected to the network, meaning
- there is some configuration or setup problem preventing
- backups from occurring.
-
- - You don't want your PC backed up and you want these email
- messages to stop.
-
-Otherwise, please make sure your PC is connected to the network
-next time you are in the office.
+# With this setting user email will be set to 'user@mydomain.com'.
+#
+$Conf{EMailUserDestDomain} = '';
-Regards,
-BackupPC Genie
-http://backuppc.sourceforge.net
-EOF
+#
+# This subject and message is sent to a user if their PC has never been
+# backed up.
+#
+# These values are language-dependent. The default versions can be
+# found in the language file (eg: lib/BackupPC/Lang/en.pm). If you
+# need to change the message, copy it here and edit it, eg:
+#
+# $Conf{EMailNoBackupEverMesg} = <<'EOF';
+# To: $user$domain
+# cc:
+# Subject: $subj
+#
+# Dear $userName,
+#
+# This is a site-specific email message.
+# EOF
+#
+$Conf{EMailNoBackupEverSubj} = undef;
+$Conf{EMailNoBackupEverMesg} = undef;
#
# How old the most recent backup has to be before notifying user.
$Conf{EMailNotifyOldBackupDays} = 7.0;
#
-# This message is sent to a user if their PC has not recently been
-# backed up (ie: more than $Conf{EMailNotifyOldBackupDays} days ago).
+# This subject and message is sent to a user if their PC has not recently
+# been backed up (ie: more than $Conf{EMailNotifyOldBackupDays} days ago).
#
-# If your mailer needs a fully-qualified To name, then change "$user"
-# to "$user@mydomain.com" in the template, eg:
+# These values are language-dependent. The default versions can be
+# found in the language file (eg: lib/BackupPC/Lang/en.pm). If you
+# need to change the message, copy it here and edit it, eg:
#
-# To: $user@mydomain.com
+# $Conf{EMailNoBackupRecentMesg} = <<'EOF';
+# To: $user$domain
+# cc:
+# Subject: $subj
+#
+# Dear $userName,
+#
+# This is a site-specific email message.
+# EOF
#
-$Conf{EMailNoBackupRecentMesg} = <<'EOF';
-To: $user
-cc:
-Subject: $subj
-
-Dear $userName,
-
-Your PC ($host) has not been successfully backed up for $days days.
-Your PC has been correctly backed up $numBackups times from $firstTime to $days days
-ago. PC backups should occur automatically when your PC is connected
-to the network.
-
-If your PC has been connected for more than a few hours to the
-network during the last $days days you should contact IS to find
-out why backups are not working.
-
-Otherwise, if you are out of the office, there's not much you can
-do, other than manually copying especially critical files to other
-media. You should be aware that any files you have created or
-changed in the last $days days (including all new email and
-attachments) cannot be restored if your PC disk crashes.
-
-Regards,
-BackupPC Genie
-http://backuppc.sourceforge.net
-EOF
+$Conf{EMailNoBackupRecentSubj} = undef;
+$Conf{EMailNoBackupRecentMesg} = undef;
#
# How old the most recent backup of Outlook files has to be before
$Conf{EMailNotifyOldOutlookDays} = 5.0;
#
-# This message is sent to a user if their Outlook files have not
-# recently been backed up (ie: more than $Conf{EMailNotifyOldOutlookDays}
+# This subject and message is sent to a user if their Outlook files have
+# not recently been backed up (ie: more than $Conf{EMailNotifyOldOutlookDays}
# days ago).
#
-# If your mailer needs a fully-qualified To name, then change "$user"
-# to "$user@mydomain.com" in the template, eg:
+# These values are language-dependent. The default versions can be
+# found in the language file (eg: lib/BackupPC/Lang/en.pm). If you
+# need to change the message, copy it here and edit it, eg:
#
-# To: $user@mydomain.com
+# $Conf{EMailOutlookBackupMesg} = <<'EOF';
+# To: $user$domain
+# cc:
+# Subject: $subj
+#
+# Dear $userName,
+#
+# This is a site-specific email message.
+# EOF
#
-$Conf{EMailOutlookBackupMesg} = <<'EOF';
-To: $user
-cc:
-Subject: $subj
-
-Dear $userName,
-
-The Outlook files on your PC have $howLong.
-These files contain all your email, attachments, contact and calendar
-information. Your PC has been correctly backed up $numBackups times from
-$firstTime to $lastTime days ago. However, Outlook locks all its files when
-it is running, preventing these files from being backed up.
-
-It is recommended you backup the Outlook files when you are connected
-to the network by exiting Outlook and all other applications, and,
-using just your browser, go to this link:
-
- http://myHost/cgi-bin/BackupPC_Admin?host=$host
-
-Select "Start Incr Backup" twice to start a new incremental backup.
-You can select "Return to $host page" and then hit "reload" to check
-the status of the backup. It should take just a few minutes to
-complete.
-
-Regards,
-BackupPC Genie
-http://backuppc.sourceforge.net
-EOF
+$Conf{EMailOutlookBackupSubj} = undef;
+$Conf{EMailOutlookBackupMesg} = undef;
###########################################################################
# CGI user interface configuration settings
$Conf{CgiAdminUserGroup} = '';
$Conf{CgiAdminUsers} = '';
+#
+# URL of the BackupPC_Admin CGI script. Used for email messages.
+#
+$Conf{CgiURL} = undef;
+
#
# Language to use. See lib/BackupPC/Lang for the list of supported
# languages, which includes English (en) and French (fr). Currently
projects / BackupPC.git / blobdiff