# Craig Barratt <cbarratt@users.sourceforge.net>
#
# COPYRIGHT
-# Copyright (C) 2001-2003 Craig Barratt
+# Copyright (C) 2001-2007 Craig Barratt
#
# See http://backuppc.sourceforge.net.
#
# you might have only one or two wakeups each night. This will keep
# the backup activity after hours. On the other hand, if you are backing
# up laptops that are only intermittently connected to the network you
-# will want to have frequent wakeups (eg: hourly) to maximized the chance
+# will want to have frequent wakeups (eg: hourly) to maximize the chance
# that each laptop is backed up.
#
# Examples:
# $Conf{WakeupSchedule} = [22.5]; # once per day at 10:30 pm.
-# $Conf{WakeupSchedule} = [1..23]; # every hour except midnight
# $Conf{WakeupSchedule} = [2,4,6,8,10,12,14,16,18,20,22]; # every 2 hours
#
# The default value is every hour except midnight.
#
-# The first entry of $Conf{WakeupSchedule} is when BackupPC_nightly
-# is run. No other backups can run while BackupPC_nightly is
-# running. You might want to re-arrange the entries in
-# $Conf{WakeupSchedule} (they don't have to be ascending) so that
-# the first entry is when you want BackupPC_nightly to run
-# (eg: when you don't expect a lot of regular backups to run).
+# The first entry of $Conf{WakeupSchedule} is when BackupPC_nightly is run.
+# You might want to re-arrange the entries in $Conf{WakeupSchedule}
+# (they don't have to be ascending) so that the first entry is when
+# you want BackupPC_nightly to run (eg: when you don't expect a lot
+# of regular backups to run).
#
-$Conf{WakeupSchedule} = [1..23];
+$Conf{WakeupSchedule} = [1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23];
#
# Maximum number of simultaneous backups to run. If there
# Full path to the df command. Security caution: normal users
# should not allowed to write to this file or directory.
#
-$Conf{DfPath} = '/bin/df';
+$Conf{DfPath} = '';
#
# Command to run df. The following variables are substituted at run-time:
#
# Full path to various commands for archiving
#
-
-$Conf{SplitPath} = '/usr/bin/split';
-$Conf{ParPath} = '/usr/bin/par2';
-$Conf{CatPath} = '/bin/cat';
-$Conf{GzipPath} = '/bin/gzip';
-$Conf{Bzip2Path} = '/usr/bin/bzip2';
+$Conf{SplitPath} = '';
+$Conf{ParPath} = '';
+$Conf{CatPath} = '';
+$Conf{GzipPath} = '';
+$Conf{Bzip2Path} = '';
#
# Maximum threshold for disk utilization on the __TOPDIR__ filesystem.
$Conf{DHCPAddressRanges} = [];
#
-# These configuration settings aren't used by BackupPC, but simply
-# remember a few settings used by configure.pl during installation.
-# These are used by configure.pl when upgrading to new versions of
-# BackupPC.
+# The BackupPC user.
#
$Conf{BackupPCUser} = '';
-$Conf{CgiDir} = '';
-$Conf{InstallDir} = '';
+
+#
+# Important installation directories:
+#
+# TopDir - where all the backup data is stored
+# ConfDir - where the main config and hosts files resides
+# LogDir - where log files and other transient information
+# InstallDir - where the bin, lib and doc installation dirs reside.
+# Note: you cannot change this value since all the
+# perl scripts include this path. You must reinstall
+# with configure.pl to change InstallDir.
+# CgiDir - Apache CGI directory for BackupPC_Admin
+#
+$Conf{TopDir} = '';
+$Conf{ConfDir} = '';
+$Conf{LogDir} = '';
+$Conf{InstallDir} = '';
+$Conf{CgiDir} = '';
#
# Whether BackupPC and the CGI script BackupPC_Admin verify that they
# time taken for the backup, plus the granularity of $Conf{WakeupSchedule}
# will make the actual backup interval a bit longer.
#
-# There are two special values for $Conf{FullPeriod}:
-#
-# -1 Don't do any regular backups on this machine. Manually
-# requested backups (via the CGI interface) will still occur.
-#
-# -2 Don't do any backups on this machine. Manually requested
-# backups (via the CGI interface) will be ignored.
-#
-# These special settings are useful for a client that is no longer
-# being backed up (eg: a retired machine), but you wish to keep the
-# last backups available for browsing or restoring to other machines.
-#
$Conf{FullPeriod} = 6.97;
#
$Conf{IncrKeepCntMin} = 1;
$Conf{IncrAgeMax} = 30;
+#
+# Level of each incremental. "Level" follows the terminology
+# of dump(1). A full backup has level 0. A new incremental
+# of level N will backup all files that have changed since
+# the most recent backup of a lower level.
+#
+# The entries of $Conf{IncrLevels} apply in order to each
+# incremental after each full backup. It wraps around until
+# the next full backup. For example, these two settings
+# have the same effect:
+#
+# $Conf{IncrLevels} = [1, 2, 3];
+# $Conf{IncrLevels} = [1, 2, 3, 1, 2, 3];
+#
+# This means the 1st and 4th incrementals (level 1) go all
+# the way back to the full. The 2nd and 3rd (and 5th and
+# 6th) backups just go back to the immediate preceeding
+# incremental.
+#
+# Specifying a sequence of multi-level incrementals will
+# usually mean more than $Conf{IncrKeepCnt} incrementals will
+# need to be kept, since lower level incrementals are needed
+# to merge a complete view of a backup. For example, with
+#
+# $Conf{FullPeriod} = 7;
+# $Conf{IncrPeriod} = 1;
+# $Conf{IncrKeepCnt} = 6;
+# $Conf{IncrLevels} = [1, 2, 3, 4, 5, 6];
+#
+# there will be up to 11 incrementals in this case:
+#
+# backup #0 (full, level 0, oldest)
+# backup #1 (incr, level 1)
+# backup #2 (incr, level 2)
+# backup #3 (incr, level 3)
+# backup #4 (incr, level 4)
+# backup #5 (incr, level 5)
+# backup #6 (incr, level 6)
+# backup #7 (full, level 0)
+# backup #8 (incr, level 1)
+# backup #9 (incr, level 2)
+# backup #10 (incr, level 3)
+# backup #11 (incr, level 4)
+# backup #12 (incr, level 5, newest)
+#
+# Backup #1 (the oldest level 1 incremental) can't be deleted
+# since backups 2..6 depend on it. Those 6 incrementals can't
+# all be deleted since that would only leave 5 (#8..12).
+# When the next incremental happens (level 6), the complete
+# set of 6 older incrementals (#1..6) will be deleted, since
+# that maintains the required number ($Conf{IncrKeepCnt})
+# of incrementals. This situation is reduced if you set
+# shorter chains of multi-level incrementals, eg:
+#
+# $Conf{IncrLevels} = [1, 2, 3];
+#
+# would only have up to 2 extra incremenals before all 3
+# are deleted.
+#
+# BackupPC as usual merges the full and the sequence
+# of incrementals together so each incremental can be
+# browsed and restored as though it is a complete backup.
+# If you specify a long chain of incrementals then more
+# backups need to be merged when browsing, restoring,
+# or getting the starting point for rsync backups.
+# In the example above (levels 1..6), browing backup
+# #6 requires 7 different backups (#0..6) to be merged.
+#
+# Because of this merging and the additional incrementals
+# that need to be kept, it is recommended that some
+# level 1 incrementals be included in $Conf{IncrLevels}.
+#
+# Prior to version 3.0 incrementals were always level 1,
+# meaning each incremental backed up all the files that
+# changed since the last full.
+#
+$Conf{IncrLevels} = [1];
+
+#
+# Disable all full and incremental backups. These settings are
+# useful for a client that is no longer being backed up
+# (eg: a retired machine), but you wish to keep the last
+# backups available for browsing or restoring to other machines.
+#
+# There are three values for $Conf{BackupsDisable}:
+#
+# 0 Backups are enabled.
+#
+# 1 Don't do any regular backups on this client. Manually
+# requested backups (via the CGI interface) will still occur.
+#
+# 2 Don't do any backups on this client. Manually requested
+# backups (via the CGI interface) will be ignored.
+#
+# In versions prior to 3.0 Backups were disabled by setting
+# $Conf{FullPeriod} to -1 or -2.
+#
+$Conf{BackupsDisable} = 0;
+
#
# A failed full backup is saved as a partial backup. The rsync
# XferMethod can take advantage of the partial full when the next
# the setting is assumed to apply all shares.
#
# If a hash is used, a special key "*" means it applies to all
-# shares.
+# shares that don't have a specific entry.
#
# Examples:
# $Conf{BackupFilesOnly} = '/myFiles';
# followed by "/*", eg: "/proc/*", instead of just "/proc".
#
# If a hash is used, a special key "*" means it applies to all
-# shares.
+# shares that don't have a specific entry.
#
# Examples:
# $Conf{BackupFilesExclude} = '/temp';
#
# Filename charset encoding on the client. BackupPC uses utf8
# on the server for filename encoding. If this is empty, then
-# utf8 is assumed and client filenames will not be modified. If set
-# to a different encoding then filenames will be re-encoded in utf8.
-# A typical WinXX encoding for latin1/western europe is 'cp1252'.
+# utf8 is assumed and client filenames will not be modified.
+# If set to a different encoding then filenames will converted
+# to/from utf8 automatically during backup and restore.
+#
+# If the file names displayed in the browser (eg: accents or special
+# characters) don't look right then it is likely you haven't set
+# $Conf{ClientCharset} correctly.
+#
+# If you are using smbclient on a WinXX machine, smbclient will convert
+# to the "unix charset" setting in smb.conf. The default is utf8,
+# in which case leave $Conf{ClientCharset} empty since smbclient does
+# the right conversion.
+#
+# If you are using rsync on a WinXX machine then it does no conversion.
+# A typical WinXX encoding for latin1/western europe is 'cp1252',
+# so in this case set $Conf{ClientCharset} to 'cp1252'.
+#
+# On a linux or unix client, run "locale charmap" to see the client's
+# charset. Set $Conf{ClientCharset} to this value. A typical value
+# for english/US is 'ISO-8859-1'.
+#
# Do "perldoc Encode::Supported" to see the list of possible charset
-# values, and also see http://czyborra.com/charsets/iso8859.html.
-#
+# values. The FAQ at http://www.cl.cam.ac.uk/~mgk25/unicode.html
+# is excellent, and http://czyborra.com/charsets/iso8859.html
+# provides more information on the iso-8859 charsets.
+#
$Conf{ClientCharset} = '';
+#
+# Prior to 3.x no charset conversion was done by BackupPC. Backups were
+# stored in what ever charset the XferMethod provided - typically utf8
+# for smbclient and the client's locale settings for rsync and tar (eg:
+# cp1252 for rsync on WinXX and perhaps iso-8859-1 with rsync on linux).
+# This setting tells BackupPC the charset that was used to store file
+# names in old backups taken with BackupPC 2.x, so that non-ascii file
+# names in old backups can be viewed and restored.
+#
+$Conf{ClientCharsetLegacy} = 'iso-8859-1';
+
#
# Name of the host share that is backed up when using SMB. This can be a
# string or an array of strings if there are multiple shares per host.
#
# This setting only matters if $Conf{XferMethod} = 'smb'.
#
-$Conf{SmbClientPath} = '/usr/bin/smbclient';
+$Conf{SmbClientPath} = '';
#
# Command to run smbclient for a full dump.
#
# This setting only matters if $Conf{XferMethod} = 'tar'.
#
-$Conf{TarClientPath} = '/bin/tar';
+$Conf{TarClientPath} = '';
#
# Path to rsync executable on the client
#
-$Conf{RsyncClientPath} = '/bin/rsync';
+$Conf{RsyncClientPath} = '';
#
# Full command to run rsync on the client machine. The following variables
#
# When rsync checksum caching is enabled (by adding the
# --checksum-seed=32761 option to $Conf{RsyncArgs}), the cached
-# checksums can be occaisonally verified to make sure the file
+# checksums can be occasionally verified to make sure the file
# contents matches the cached checksums. This is to avoid the
# risk that disk problems might cause the pool file contents to
# get corrupted, but the cached checksums would make BackupPC
'--perms',
'--owner',
'--group',
- '--devices',
+ '-D',
'--links',
+ '--hard-links',
'--times',
'--block-size=2048',
'--recursive',
#
- # If you are using a patched client rsync that supports the
- # --checksum-seed option (see http://backuppc.sourceforge.net),
- # then uncomment this to enabled rsync checksum cachcing
+ # Rsync >= 2.6.3 supports the --checksum-seed option
+ # which allows rsync checksum caching on the server.
+ # Uncomment this to enable rsync checksum caching if
+ # you have a recent client rsync version and you want
+ # to enable checksum caching.
#
#'--checksum-seed=32761',
'--perms',
'--owner',
'--group',
- '--devices',
+ '-D',
'--links',
+ '--hard-links',
'--times',
'--block-size=2048',
'--relative',
'--recursive',
#
- # If you are using a patched client rsync that supports the
- # --checksum-seed option (see http://backuppc.sourceforge.net),
- # then uncomment this to enabled rsync checksum cachcing
+ # Rsync >= 2.6.3 supports the --checksum-seed option
+ # which allows rsync checksum caching on the server.
+ # Uncomment this to enable rsync checksum caching if
+ # you have a recent client rsync version and you want
+ # to enable checksum caching.
#
#'--checksum-seed=32761',
#
# Path to backuppcd executable on the server
#
-$Conf{BackupPCdPath} = '/usr/bin/backuppcd';
+$Conf{BackupPCdPath} = '';
#
# Full command to run backuppcd on the server to backup a given
# Full path for ssh. Security caution: normal users should not
# allowed to write to this file or directory.
#
-$Conf{SshPath} = '/usr/bin/ssh';
+$Conf{SshPath} = '';
#
# Full path for nmblookup. Security caution: normal users should not
# nmblookup is from the Samba distribution. nmblookup is used to get the
# netbios name, necessary for DHCP hosts.
#
-$Conf{NmbLookupPath} = '/usr/bin/nmblookup';
+$Conf{NmbLookupPath} = '';
#
# NmbLookup command. Given an IP address, does an nmblookup on that
#
# $Conf{PingPath} = '/bin/echo';
#
-$Conf{PingPath} = '/bin/ping';
+$Conf{PingPath} = '';
#
# Ping command. The following variables are substituted at run-time:
$Conf{ArchivePreUserCmd} = undef;
$Conf{ArchivePostUserCmd} = undef;
+#
+# Whether the exit status of each PreUserCmd and
+# PostUserCmd is checked.
+#
+# If set and the Dump/Restore/Archive Pre/Post UserCmd
+# returns a non-zero exit status then the dump/restore/archive
+# is aborted. To maintain backward compatibility (where
+# the exit status in early versions was always ignored),
+# this flag defaults to 0.
+#
+# If this flag is set and the Dump/Restore/Archive PreUserCmd
+# fails then the matching Dump/Restore/Archive PostUserCmd is
+# not executed. If DumpPreShareCmd returns a non-exit status,
+# then DumpPostShareCmd is not executed, but the DumpPostUserCmd
+# is still run (since DumpPreUserCmd must have previously
+# succeeded).
+#
+# An example of a DumpPreUserCmd that might fail is a script
+# that snapshots or dumps a database which fails because
+# of some database error.
+#
+$Conf{UserCmdCheckStatus} = 0;
+
#
# Override the client's host name. This allows multiple clients
# to all refer to the same physical host. This should only be
# Full path to the sendmail command. Security caution: normal users
# should not allowed to write to this file or directory.
#
-$Conf{SendmailPath} = '/usr/sbin/sendmail';
+$Conf{SendmailPath} = '';
#
# Minimum period between consecutive emails to a single user.
$Conf{EMailOutlookBackupMesg} = undef;
#
-# Additional email headers
+# Additional email headers. If you change the charset
+# to utf8 then BackupPC_sendEmail will use utf8 for
+# the email body.
#
$Conf{EMailHeaders} = <<EOF;
MIME-Version: 1.0
#
# Language to use. See lib/BackupPC/Lang for the list of supported
# languages, which include English (en), French (fr), Spanish (es),
-# German (de), Italian (it), Dutch (nl) and Portuguese Brazillian
-# (pt_br).
+# German (de), Italian (it), Dutch (nl), Polish (pl), Portuguese
+# Brazillian (pt_br) and Chinese (zh_CH).
#
# Currently the Language setting applies to the CGI interface and email
# messages sent to users. Log files and other text are still in English.
$Conf{CgiUserUrlCreate} = 'mailto:%s';
#
-# Date display format for CGI interface. True for US-style dates (MM/DD)
-# and zero for international dates (DD/MM).
+# Date display format for CGI interface. A value of 1 uses US-style
+# dates (MM/DD), a value of 2 uses full YYYY-MM-DD format, and zero
+# for international dates (DD/MM).
#
$Conf{CgiDateFormatMMDD} = 1;
Reason_no_ping => '#ffff99',
Reason_backup_canceled_by_user => '#ff9900',
Status_backup_in_progress => '#66cc99',
+ Disabled_OnlyManualBackups => '#d1d1d1',
+ Disabled_AllBackupsDisabled => '#d1d1d1',
};
#
$Conf{CgiImageDirURL} = '';
#
-# CSS stylesheet for the CGI interface. It is stored in the
-# $Conf{CgiImageDir} directory and accessed via the
+# CSS stylesheet "skin" for the CGI interface. It is stored
+# in the $Conf{CgiImageDir} directory and accessed via the
# $Conf{CgiImageDirURL} URL.
#
+# For BackupPC v3.x several color, layout and font changes were made.
+# The previous v2.x version is available as BackupPC_stnd_orig.css, so
+# if you prefer the old skin, change this to BackupPC_stnd_orig.css.
+#
$Conf{CgiCSSFile} = 'BackupPC_stnd.css';
#
#
# Which per-host config variables a non-admin user is allowed
-# to edit.
+# to edit. Admin users can edit all per-host config variables,
+# even if disabled in this list.
+#
+# SECURITY WARNING: Do not let users edit any of the Cmd
+# config variables! That's because a user could set a
+# Cmd to a shell script of their choice and it will be
+# run as the BackupPC user. That script could do all
+# sorts of bad things.
#
$Conf{CgiUserConfigEdit} = {
FullPeriod => 1,
IncrKeepCnt => 1,
IncrKeepCntMin => 1,
IncrAgeMax => 1,
- PartialAgeMax => 1,
+ IncrLevels => 1,
IncrFill => 1,
+ PartialAgeMax => 1,
RestoreInfoKeepCnt => 1,
ArchiveInfoKeepCnt => 1,
BackupFilesOnly => 1,
BackupFilesExclude => 1,
+ BackupsDisable => 1,
BlackoutBadPingLimit => 1,
BlackoutGoodCnt => 1,
BlackoutPeriods => 1,
BackupZeroFilesIsFatal => 1,
+ ClientCharset => 1,
+ ClientCharsetLegacy => 1,
XferMethod => 1,
XferLogLevel => 1,
SmbShareName => 1,
SmbShareUserName => 1,
SmbSharePasswd => 1,
+ SmbClientFullCmd => 0,
+ SmbClientIncrCmd => 0,
+ SmbClientRestoreCmd => 0,
TarShareName => 1,
TarFullArgs => 1,
TarIncrArgs => 1,
+ TarClientCmd => 0,
+ TarClientRestoreCmd => 0,
+ TarClientPath => 0,
RsyncShareName => 1,
RsyncdClientPort => 1,
RsyncdPasswd => 1,
+ RsyncdUserName => 1,
RsyncdAuthRequired => 1,
RsyncCsumCacheVerifyProb => 1,
RsyncArgs => 1,
RsyncRestoreArgs => 1,
+ RsyncClientCmd => 0,
+ RsyncClientRestoreCmd => 0,
+ RsyncClientPath => 0,
ArchiveDest => 1,
ArchiveComp => 1,
ArchivePar => 1,
ArchiveSplit => 1,
+ ArchiveClientCmd => 0,
FixedIPNetBiosNameCheck => 1,
+ NmbLookupCmd => 0,
+ NmbLookupFindHostCmd => 0,
PingMaxMsec => 1,
+ PingCmd => 0,
ClientTimeout => 1,
MaxOldPerPCLogFiles => 1,
CompressLevel => 1,
ClientNameAlias => 1,
+ DumpPreUserCmd => 0,
+ DumpPostUserCmd => 0,
+ RestorePreUserCmd => 0,
+ RestorePostUserCmd => 0,
+ ArchivePreUserCmd => 0,
+ ArchivePostUserCmd => 0,
+ DumpPostShareCmd => 0,
+ DumpPreShareCmd => 0,
+ UserCmdCheckStatus => 0,
EMailNotifyMinDays => 1,
EMailFromUserName => 1,
EMailAdminUserName => 1,
projects / BackupPC.git / blobdiff