# extra old backups will be removed.
#
# If filling of incremental dumps is off the oldest backup always
-# has to be a full (ie: filled) dump. This might mean an extra full
-# dump is kept until the second oldest (incremental) dump expires.
+# has to be a full (ie: filled) dump. This might mean one or two
+# extra full dumps are kept until the oldest incremental backups expire.
+#
+# Exponential backup expiry is also supported. This allows you to specify:
+#
+# - num fulls to keep at intervals of 1 * $Conf{FullPeriod}, followed by
+# - num fulls to keep at intervals of 2 * $Conf{FullPeriod},
+# - num fulls to keep at intervals of 4 * $Conf{FullPeriod},
+# - num fulls to keep at intervals of 8 * $Conf{FullPeriod},
+# - num fulls to keep at intervals of 16 * $Conf{FullPeriod},
+#
+# and so on. This works by deleting every other full as each expiry
+# boundary is crossed.
+#
+# Exponential expiry is specified using an array for $Conf{FullKeepCnt}:
+#
+# $Conf{FullKeepCnt} = [4, 2, 3];
+#
+# Entry #n specifies how many fulls to keep at an interval of
+# 2^n * $Conf{FullPeriod} (ie: 1, 2, 4, 8, 16, 32, ...).
+#
+# The example above specifies keeping 4 of the most recent full backups
+# (1 week interval) two full backups at 2 week intervals, and 3 full
+# backups at 4 week intervals, eg:
+#
+# full 0 19 weeks old \
+# full 1 15 weeks old >--- 3 backups at 4 * $Conf{FullPeriod}
+# full 2 11 weeks old /
+# full 3 7 weeks old \____ 2 backups at 2 * $Conf{FullPeriod}
+# full 4 5 weeks old /
+# full 5 3 weeks old \
+# full 6 2 weeks old \___ 4 backups at 1 * $Conf{FullPeriod}
+# full 7 1 week old /
+# full 8 current /
+#
+# On a given week the spacing might be less than shown as each backup
+# ages through each expiry period. For example, one week later, a
+# new full is completed and the oldest is deleted, giving:
+#
+# full 0 16 weeks old \
+# full 1 12 weeks old >--- 3 backups at 4 * $Conf{FullPeriod}
+# full 2 8 weeks old /
+# full 3 6 weeks old \____ 2 backups at 2 * $Conf{FullPeriod}
+# full 4 4 weeks old /
+# full 5 3 weeks old \
+# full 6 2 weeks old \___ 4 backups at 1 * $Conf{FullPeriod}
+# full 7 1 week old /
+# full 8 current /
+#
+# You can specify 0 as a count (except in the first entry), and the
+# array can be as long as you wish. For example:
+#
+# $Conf{FullKeepCnt} = [4, 0, 4, 0, 0, 2];
+#
+# This will keep 10 full dumps, 4 most recent at 1 * $Conf{FullPeriod},
+# followed by 4 at an interval of 4 * $Conf{FullPeriod} (approx 1 month
+# apart), and then 2 at an interval of 32 * $Conf{FullPeriod} (approx
+# 7-8 months apart).
+#
+# Note that you will have to increase $Conf{FullAgeMax} if you want
+# very old full backups to be kept. Full backups are removed according
+# to both $Conf{FullKeepCnt} and $Conf{FullAgeMax}.
+#
+# Note also that these two settings are equivalent and both keep just
+# the four most recent full dumps:
+#
+# $Conf{FullKeepCnt} = 4;
+# $Conf{FullKeepCnt} = [4];
#
$Conf{FullKeepCnt} = 1;
# they are.
#
$Conf{FullKeepCntMin} = 1;
-$Conf{FullAgeMax} = 60;
+$Conf{FullAgeMax} = 90;
#
# Number of incremental backups to keep. Must be >= 1.
$Conf{RestoreInfoKeepCnt} = 10;
#
-# Number of archive logs to keep. BackupPC remembers information about
-# each archive request. This number per archive client will be kept around before
-# the oldest ones are pruned.
+# Number of archive logs to keep. BackupPC remembers information
+# about each archive request. This number per archive client will
+# be kept around before the oldest ones are pruned.
#
$Conf{ArchiveInfoKeepCnt} = 10;
# the directory name: a trailing "/" causes the name to not match
# and the directory will not be excluded.
#
+# Users report that for smbclient you should specify a directory
+# followed by "/*", eg: "/proc/*", instead of just "/proc".
+#
# Examples:
# $Conf{BackupFilesExclude} = '/temp';
# $Conf{BackupFilesExclude} = ['/temp']; # same as first example
# each PC a count of consecutive good pings is maintained. Once a PC has
# at least $Conf{BlackoutGoodCnt} consecutive good pings it is subject
# to "blackout" and not backed up during hours and days specified by
-# $Conf{BlackoutWeekDays}, $Conf{BlackoutHourBegin} and
-# $Conf{BlackoutHourEnd}.
+# $Conf{BlackoutPeriods}.
#
# To allow for periodic rebooting of a PC or other brief periods when a
# PC is not on the network, a number of consecutive bad pings is allowed
$Conf{BlackoutGoodCnt} = 7;
#
-# The default settings specify the blackout period from 7:00am to
-# 7:30pm local time on Mon-Fri. For $Conf{BlackoutWeekDays},
-# 0 is Sunday, 1 is Monday etc.
+# One or more blackout periods can be specified. If a client is
+# subject to blackout then no regular (non-manual) backups will
+# be started during any of these periods. hourBegin and hourEnd
+# specify hours fro midnight and weekDays is a list of days of
+# the week where 0 is Sunday, 1 is Monday etc.
+#
+# For example:
+#
+# $Conf{BlackoutPeriods} = [
+# {
+# hourBegin => 7.0,
+# hourEnd => 19.5,
+# weekDays => [1, 2, 3, 4, 5],
+# },
+# ];
+#
+# specifies one blackout period from 7:00am to 7:30pm local time
+# on Mon-Fri.
+#
+# The blackout period can also span midnight by setting
+# hourBegin > hourEnd, eg:
+#
+# $Conf{BlackoutPeriods} = [
+# {
+# hourBegin => 7.0,
+# hourEnd => 19.5,
+# weekDays => [1, 2, 3, 4, 5],
+# },
+# {
+# hourBegin => 23,
+# hourEnd => 5,
+# weekDays => [5, 6],
+# },
+# ];
+#
+# This specifies one blackout period from 7:00am to 7:30pm local time
+# on Mon-Fri, and a second period from 11pm to 5am on Friday and
+# Saturday night.
#
-$Conf{BlackoutHourBegin} = 7.0;
-$Conf{BlackoutHourEnd} = 19.5;
-$Conf{BlackoutWeekDays} = [1, 2, 3, 4, 5];
+$Conf{BlackoutPeriods} = [
+ {
+ hourBegin => 7.0,
+ hourEnd => 19.5,
+ weekDays => [1, 2, 3, 4, 5],
+ },
+];
#
# A backup of a share that has zero files is considered fatal. This is
# $X_option exclude option (if $fileList is an exclude list)
# $timeStampFile start time for incremental dump
#
+# If your smb share is read-only then direct restores will fail.
+# You should set $Conf{SmbClientRestoreCmd} to undef and the
+# corresponding CGI restore option will be removed.
+#
$Conf{SmbClientFullCmd} = '$smbClientPath \\\\$host\\$shareName'
. ' $I_option -U $userName -E -N -d 1'
. ' -c tarmode\\ full -Tc$X_option - $fileList';
#
# This setting only matters if $Conf{XferMethod} = 'tar'.
#
-$Conf{TarClientCmd} = '$sshPath -q -n -l root $host'
+$Conf{TarClientCmd} = '$sshPath -q -x -n -l root $host'
. ' $tarPath -c -v -f - -C $shareName+'
. ' --totals';
#
# This setting only matters if $Conf{XferMethod} = "tar".
#
-$Conf{TarClientRestoreCmd} = '$sshPath -q -l root $host'
+# If you want to disable direct restores using tar, you should set
+# $Conf{TarClientRestoreCmd} to undef and the corresponding CGI
+# restore option will be removed.
+#
+$Conf{TarClientRestoreCmd} = '$sshPath -q -x -l root $host'
. ' $tarPath -x -p --numeric-owner --same-owner'
. ' -v -f - -C $shareName+';
#
# This setting only matters if $Conf{XferMethod} = 'rsync'.
#
-$Conf{RsyncClientCmd} = '$sshPath -l root $host $rsyncPath $argList+';
+$Conf{RsyncClientCmd} = '$sshPath -q -x -l root $host $rsyncPath $argList+';
#
# Full command to run rsync for restore on the client. The following
#
# This setting only matters if $Conf{XferMethod} = 'rsync'.
#
-$Conf{RsyncClientRestoreCmd} = '$sshPath -l root $host $rsyncPath $argList+';
+$Conf{RsyncClientRestoreCmd} = '$sshPath -q -x -l root $host $rsyncPath $argList+';
#
# Share name to backup. For $Conf{XferMethod} = "rsync" this should
# Arguments to rsync for restore. Do not edit the first set unless you
# have a thorough understanding of how File::RsyncP works.
#
+# If you want to disable direct restores using rsync (eg: is the module
+# is read-only), you should set $Conf{RsyncRestoreArgs} to undef and
+# the corresponding CGI restore option will be removed.
#
$Conf{RsyncRestoreArgs} = [
#
# Archive Command
#
# This is the command that is called to actually run the archive process
-# The following variables are substituted at run-time:
+# for each host. The following variables are substituted at run-time:
#
# $Installdir The installation directory of BackupPC
# $tarCreatePath The path to BackupPC_tarCreate
# $archiveloc The location to put the archive
# $parfile The number of par files to create
#
-$Conf{ArchiveClientCmd} = '$Installdir/bin/BackupPC_archivecd $tarCreatePath $splitpath $parpath $host $backupnumber $compression $compext $splitsize $archiveloc $parfile /';
+$Conf{ArchiveClientCmd} = '$Installdir/bin/BackupPC_archiveHost'
+ . ' $tarCreatePath $splitpath $parpath $host $backupnumber'
+ . ' $compression $compext $splitsize $archiveloc $parfile *';
#
# Full path for ssh. Security caution: normal users should not
# Example:
#
# $Conf{ServerInitdPath} = '/etc/init.d/backuppc';
-# $Conf{ServerInitdStartCmd} = '$sshPath -l root $serverHost'
+# $Conf{ServerInitdStartCmd} = '$sshPath -q -x -l root $serverHost'
# . ' $serverInitdPath start'
# . ' < /dev/null >& /dev/null';
#
# shut down and restart a database server, or to dump a database
# to files for backup. Example:
#
-# $Conf{DumpPreUserCmd} = '$sshPath -l root $host /usr/bin/dumpMysql';
+# $Conf{DumpPreUserCmd} = '$sshPath -q -x -l root $host /usr/bin/dumpMysql';
#
# The following variable substitutions are made at run time for
# $Conf{DumpPreUserCmd} and $Conf{DumpPostUserCmd}:
#
# Language to use. See lib/BackupPC/Lang for the list of supported
# languages, which include English (en), French (fr), Spanish (es),
-# and German (de).
+# German (de), and Italian (it).
#
# Currently the Language setting applies to the CGI interface and email
-# messages sent to users. Log files and other text is still in English.
+# messages sent to users. Log files and other text are still in English.
#
$Conf{Language} = 'en';
#
$Conf{CgiNavBarAdminAllHosts} = 0;
-#
-# Color scheme for CGI interface.
-#
-$Conf{CgiHeaderBgColor} = '#99cc33';
-
#
# Hilight colors based on status that are used in the PC summary page.
#
};
#
-# Additional CGI header text. For example, if you wanted each CGI page
-# to auto refresh every 900 seconds, you could add this text:
-#
-# <meta http-equiv="refresh" content="900">
+# Additional CGI header text.
#
$Conf{CgiHeaders} = '<meta http-equiv="pragma" content="no-cache">';
font-size:1em;
color:#000000
}
-
+
p {
font-family:arial,sans-serif;
font-size:.9em
}
-
+
a {
font-family:arial,sans-serif;
- font-size:1em;
color:#3333ff
}
li {
font-size:.9em;
}
-
+
a:hover {
color:#cc0000;
text-decoration:none
}
-
+
a.NavCurrent {
font-weight:bold;
}
-
+
a.navbar {
padding-left:5px;
padding-right:5px;
font-weight:bold;
background-color:#99cc33;
padding:3px;
- padding-left:10px
+ padding-left:6px;
+ margin-bottom:5px;
}
-
+
.h2 {
font-family:arial,sans-serif;
font-size:1em;
font-weight:bold;
background-color:#ddeeee;
padding:3px;
- padding-left:10px
+ padding-left:6px;
+ margin-top:3px;
+ margin-bottom:1px;
}
-.border {
- border-bottom:1px solid #000000;
- border-left:1px dotted #666666;
- font-size:.9em;
+.tableStnd {
}
.tableheader {
font-size:.8em;
font-weight:bold;
- background-color:#cccccc
+ background-color:#cccccc;
+}
+
+.border {
+ font-size:.9em;
}
-
+
.fviewheader {
font-weight:bold;
font-size:.8em;
color:#ffffff;
- background-color:#999999
+ background-color:#999999;
}
-
+
.fviewborder {
border-bottom:1px solid #000000;
border-left:1px dotted #666666;
background-color:#dddddd;
font-size:.9em;
}
-
+
.fviewon {
- background-color:#cccccc
+ background-color:#cccccc;
}
.fviewoff {
- background-color:#ffffff
+ background-color:#ffffff;
}
.fview {
- font-size:13px;
+ font-size:.8em;
font-family:arial,sans-serif;
text-decoration:none;
- line-height:15px
+ line-height:15px;
}
.fviewbold {
- font-size:13px;
+ font-size:.9em;
font-family:arial,sans-serif;
text-decoration:none;
line-height:15px;
- font-weight:bold
+ font-weight:bold;
}
.histView {
border-bottom:1px solid #000000;
border-left:2px solid #ffffff;
- background-color:#dddddd
+ background-color:#dddddd;
+ font-size:.9em;
}
-
+
.histViewMis {
border-bottom:1px solid #000000;
- background-color:#ffdddd
+ background-color:#ffdddd;
}
-
+
div.NavMenu {
width:18%;
margin:0px;
background-color:#ddeeee;
}
-
+
div.NavMenu a {
font-size:.8em;
display:block;
margin-left:8px;
padding:2px;
}
-
+
div.NavTitle {
padding-left:10px;
background-color:#99cc33;
font-family:arial,sans-serif;
color:#000000;
- font-weight:bold
+ font-weight:bold;
+ margin-bottom:2px;
}
-
+
#Content {
float:right;
width:80%;
projects / BackupPC.git / blobdiff