* Removed default paths from conf/config.pl so configure.pl will

[BackupPC.git] / conf / config.pl

diff --git a/conf/config.pl b/conf/config.pl
index 46fd26f..9d0c276 100644 (file)
--- a/conf/config.pl
+++ b/conf/config.pl
@@ -98,7 +98,7 @@ $Conf{UmaskMode} = 027;
 # you might have only one or two wakeups each night.  This will keep
 # the backup activity after hours.  On the other hand, if you are backing
 # up laptops that are only intermittently connected to the network you
-# will want to have frequent wakeups (eg: hourly) to maximized the chance
+# will want to have frequent wakeups (eg: hourly) to maximize the chance
 # that each laptop is backed up.
 #
 # Examples:
@@ -201,7 +201,7 @@ $Conf{MaxOldLogFiles} = 14;
 # Full path to the df command.  Security caution: normal users
 # should not allowed to write to this file or directory.
 #
-$Conf{DfPath} = '/bin/df';
+$Conf{DfPath} = '';
 
 #
 # Command to run df.  The following variables are substituted at run-time:
@@ -214,12 +214,11 @@ $Conf{DfCmd} = '$dfPath $topDir';
 #
 # Full path to various commands for archiving
 #
-
-$Conf{SplitPath} = '/usr/bin/split';
-$Conf{ParPath}   = '/usr/bin/par2';
-$Conf{CatPath}   = '/bin/cat';
-$Conf{GzipPath}  = '/bin/gzip';
-$Conf{Bzip2Path} = '/usr/bin/bzip2';
+$Conf{SplitPath} = '';
+$Conf{ParPath}   = '';
+$Conf{CatPath}   = '';
+$Conf{GzipPath}  = '';
+$Conf{Bzip2Path} = '';
 
 #
 # Maximum threshold for disk utilization on the __TOPDIR__ filesystem.
@@ -912,7 +911,7 @@ $Conf{SmbSharePasswd} = '';
 #
 # This setting only matters if $Conf{XferMethod} = 'smb'.
 #
-$Conf{SmbClientPath} = '/usr/bin/smbclient';
+$Conf{SmbClientPath} = '';
 
 #
 # Command to run smbclient for a full dump.
@@ -1091,12 +1090,12 @@ $Conf{TarClientRestoreCmd} = '$sshPath -q -x -l root $host'
 #
 # This setting only matters if $Conf{XferMethod} = 'tar'.
 #
-$Conf{TarClientPath} = '/bin/tar';
+$Conf{TarClientPath} = '';
 
 #
 # Path to rsync executable on the client
 #
-$Conf{RsyncClientPath} = '/bin/rsync';
+$Conf{RsyncClientPath} = '';
 
 #
 # Full command to run rsync on the client machine.  The following variables
@@ -1181,7 +1180,7 @@ $Conf{RsyncdAuthRequired} = 1;
 #
 # When rsync checksum caching is enabled (by adding the
 # --checksum-seed=32761 option to $Conf{RsyncArgs}), the cached
-# checksums can be occaisonally verified to make sure the file
+# checksums can be occasionally verified to make sure the file
 # contents matches the cached checksums.  This is to avoid the
 # risk that disk problems might cause the pool file contents to
 # get corrupted, but the cached checksums would make BackupPC
@@ -1231,9 +1230,11 @@ $Conf{RsyncArgs} = [
             '--recursive',
 
            #
-           # If you are using a patched client rsync that supports the
-           # --checksum-seed option (see http://backuppc.sourceforge.net),
-           # then uncomment this to enabled rsync checksum cachcing
+           # Rsync >= 2.6.3 supports the --checksum-seed option
+            # which allows rsync checksum caching on the server.
+           # Uncomment this to enable rsync checksum caching if
+            # you have a recent client rsync version and you want
+            # to enable checksum caching.
            #
            #'--checksum-seed=32761',
 
@@ -1268,9 +1269,11 @@ $Conf{RsyncRestoreArgs} = [
            '--recursive',
 
            #
-           # If you are using a patched client rsync that supports the
-           # --checksum-seed option (see http://backuppc.sourceforge.net),
-           # then uncomment this to enabled rsync checksum cachcing
+           # Rsync >= 2.6.3 supports the --checksum-seed option
+            # which allows rsync checksum caching on the server.
+           # Uncomment this to enable rsync checksum caching if
+            # you have a recent client rsync version and you want
+            # to enable checksum caching.
            #
            #'--checksum-seed=32761',
 
@@ -1293,7 +1296,7 @@ $Conf{BackupPCdShareName} = '/';
 #
 # Path to backuppcd executable on the server
 #
-$Conf{BackupPCdPath} = '/usr/bin/backuppcd';
+$Conf{BackupPCdPath} = '';
 
 #
 # Full command to run backuppcd on the server to backup a given
@@ -1409,7 +1412,7 @@ $Conf{ArchiveClientCmd} = '$Installdir/bin/BackupPC_archiveHost'
 # Full path for ssh. Security caution: normal users should not
 # allowed to write to this file or directory.
 #
-$Conf{SshPath} = '/usr/bin/ssh';
+$Conf{SshPath} = '';
 
 #
 # Full path for nmblookup. Security caution: normal users should not
@@ -1418,7 +1421,7 @@ $Conf{SshPath} = '/usr/bin/ssh';
 # nmblookup is from the Samba distribution. nmblookup is used to get the
 # netbios name, necessary for DHCP hosts.
 #
-$Conf{NmbLookupPath} = '/usr/bin/nmblookup';
+$Conf{NmbLookupPath} = '';
 
 #
 # NmbLookup command.  Given an IP address, does an nmblookup on that
@@ -1478,7 +1481,7 @@ $Conf{FixedIPNetBiosNameCheck} = 0;
 #
 #     $Conf{PingPath} = '/bin/echo';
 #
-$Conf{PingPath} = '/bin/ping';
+$Conf{PingPath} = '';
 
 #
 # Ping command.  The following variables are substituted at run-time:
@@ -1695,7 +1698,7 @@ $Conf{ClientNameAlias} = undef;
 # Full path to the sendmail command.  Security caution: normal users
 # should not allowed to write to this file or directory.
 #
-$Conf{SendmailPath} = '/usr/sbin/sendmail';
+$Conf{SendmailPath} = '';
 
 #
 # Minimum period between consecutive emails to a single user.
@@ -1943,6 +1946,8 @@ $Conf{CgiStatusHilightColor} = {
     Reason_no_ping                 => '#ffff99',
     Reason_backup_canceled_by_user => '#ff9900',
     Status_backup_in_progress      => '#66cc99',
+    Disabled_OnlyManualBackups     => '#d1d1d1',   
+    Disabled_AllBackupsDisabled    => '#d1d1d1',          
 };
 
 #
@@ -1982,10 +1987,14 @@ $Conf{CgiExt2ContentType} = { };
 $Conf{CgiImageDirURL} = '';
 
 #
-# CSS stylesheet for the CGI interface.  It is stored in the
-# $Conf{CgiImageDir} directory and accessed via the
+# CSS stylesheet "skin" for the CGI interface.  It is stored
+# in the $Conf{CgiImageDir} directory and accessed via the
 # $Conf{CgiImageDirURL} URL.
 #
+# For BackupPC v3.x several color, layout and font changes were made.
+# The previous v2.x version is available as BackupPC_stnd_orig.css, so
+# if you prefer the old skin, change this to BackupPC_stnd_orig.css.
+#
 $Conf{CgiCSSFile} = 'BackupPC_stnd.css';
 
 #
@@ -2020,6 +2029,7 @@ $Conf{CgiUserConfigEdit} = {
         ArchiveInfoKeepCnt        => 1,
         BackupFilesOnly           => 1,
         BackupFilesExclude        => 1,
+        BackupsDisable            => 1,
         BlackoutBadPingLimit      => 1,
         BlackoutGoodCnt           => 1,
         BlackoutPeriods           => 1,