# apart), and then 2 at an interval of 32 * $Conf{FullPeriod} (approx
# 7-8 months apart).
#
-# Note that you will have to increase $Conf{FullAgeMax} if you want
-# very old full backups to be kept. Full backups are removed according
-# to both $Conf{FullKeepCnt} and $Conf{FullAgeMax}.
-#
-# Note also that these two settings are equivalent and both keep just
+# Example: these two settings are equivalent and both keep just
# the four most recent full dumps:
#
# $Conf{FullKeepCnt} = 4;
# we keep at least $Conf{FullKeepCntMin} full backups no matter how old
# they are.
#
+# Note that $Conf{FullAgeMax} will be increased to $Conf{FullAgeMax}
+# times $Conf{FullPeriod} if $Conf{FullAgeMax} specifies enough
+# full backups to exceed $Conf{FullAgeMax}.
+#
$Conf{FullKeepCntMin} = 1;
$Conf{FullAgeMax} = 90;
# to give a list of directories or files to backup for each share
# (the share name is the key). If this is set to just a string or
# array, and $Conf{SmbShareName} contains multiple share names, then
-# the setting is assumed to apply to only the first share name.
+# the setting is assumed to apply all shares.
#
# Examples:
# $Conf{BackupFilesOnly} = '/myFiles';
# to give a list of directories or files to exclude for each share
# (the share name is the key). If this is set to just a string or
# array, and $Conf{SmbShareName} contains multiple share names, then
-# the setting is assumed to apply to only the first share name.
+# the setting is assumed to apply to all shares.
#
# The exact behavior is determined by the underlying transport program,
# smbclient or tar. For smbclient the exlclude file list is passed into
# - 'rsync': backup and restore via rsync (via rsh or ssh).
# Best choice for linux/unix. Good choice also for WinXX.
#
-# - 'rsyncd': backup and restre via rsync daemon on the client.
+# - 'rsyncd': backup and restore via rsync daemon on the client.
# Best choice for linux/unix if you have rsyncd running on
# the client. Good choice also for WinXX.
#
$Conf{SmbClientPath} = '/usr/bin/smbclient';
#
-# Commands to run smbclient for a full dump, incremental dump or a restore.
+# Command to run smbclient for a full dump.
# This setting only matters if $Conf{XferMethod} = 'smb'.
#
# The following variables are substituted at run-time:
# $X_option exclude option (if $fileList is an exclude list)
# $timeStampFile start time for incremental dump
#
-# If your smb share is read-only then direct restores will fail.
-# You should set $Conf{SmbClientRestoreCmd} to undef and the
-# corresponding CGI restore option will be removed.
-#
$Conf{SmbClientFullCmd} = '$smbClientPath \\\\$host\\$shareName'
. ' $I_option -U $userName -E -N -d 1'
. ' -c tarmode\\ full -Tc$X_option - $fileList';
+#
+# Command to run smbclient for an incremental dump.
+# This setting only matters if $Conf{XferMethod} = 'smb'.
+#
+# Same variable substitutions are applied as $Conf{SmbClientFullCmd}.
+#
$Conf{SmbClientIncrCmd} = '$smbClientPath \\\\$host\\$shareName'
. ' $I_option -U $userName -E -N -d 1'
. ' -c tarmode\\ full -TcN$X_option $timeStampFile - $fileList';
+#
+# Command to run smbclient for a restore.
+# This setting only matters if $Conf{XferMethod} = 'smb'.
+#
+# Same variable substitutions are applied as $Conf{SmbClientFullCmd}.
+#
+# If your smb share is read-only then direct restores will fail.
+# You should set $Conf{SmbClientRestoreCmd} to undef and the
+# corresponding CGI restore option will be removed.
+#
$Conf{SmbClientRestoreCmd} = '$smbClientPath \\\\$host\\$shareName'
. ' $I_option -U $userName -E -N -d 1'
. ' -c tarmode\\ full -Tx -';
# Only for file archives. Splits the output into
# the specified size * 1,000,000.
# e.g. to split into 650,000,000 bytes, specify 650 below.
+#
+# If the value is 0, or if $Conf{ArchiveDest} is an existing file or
+# device (e.g. a streaming tape drive), this feature is disabled.
#
-$Conf{ArchiveSplit} = 650;
+$Conf{ArchiveSplit} = 0;
#
# Archive Command
# Despite the name, this parameter sets the timeout for all transport
# methods (tar, smb etc).
#
-$Conf{ClientTimeout} = 7200;
+$Conf{ClientTimeout} = 72000;
#
# Maximum number of log files we keep around in each PC's directory
# $shares list of all the share names
# $XferMethod value of $Conf{XferMethod} (eg: tar, rsync, smb)
# $sshPath value of $Conf{SshPath},
+# $cmdType set to DumpPreUserCmd or DumpPostUserCmd
#
# The following variable substitutions are made at run time for
# $Conf{RestorePreUserCmd} and $Conf{RestorePostUserCmd}:
# $pathHdrSrc common starting path of restore source
# $pathHdrDest common starting path of destination
# $fileList list of files being restored
+# $cmdType set to RestorePreUserCmd or RestorePostUserCmd
#
# The following variable substitutions are made at run time for
# $Conf{ArchivePreUserCmd} and $Conf{ArchivePostUserCmd}:
# $splitsize size of the files that the archive creates
# $sshPath value of $Conf{SshPath},
# $type set to "archive"
+# $cmdType set to ArchivePreUserCmd or ArchivePostUserCmd
#
$Conf{DumpPreUserCmd} = undef;
$Conf{DumpPostUserCmd} = undef;
# To: $user$domain
# cc:
# Subject: $subj
-#
+# $headers
# Dear $userName,
#
# This is a site-specific email message.
# To: $user$domain
# cc:
# Subject: $subj
-#
+# $headers
# Dear $userName,
#
# This is a site-specific email message.
# To: $user$domain
# cc:
# Subject: $subj
-#
+# $headers
# Dear $userName,
#
# This is a site-specific email message.
#
# Language to use. See lib/BackupPC/Lang for the list of supported
# languages, which include English (en), French (fr), Spanish (es),
-# German (de), and Italian (it).
+# German (de), Italian (it) and Dutch (nl).
#
# Currently the Language setting applies to the CGI interface and email
# messages sent to users. Log files and other text are still in English.
projects / BackupPC.git / blobdiff