#
$Conf{HardLinkMax} = 31999;
-###########################################################################
-# What to backup and when to do it
-# (can be overridden in the per-PC config.pl)
-###########################################################################
-#
-# Name of the host share that is backed up when using SMB. This can be a
-# string or an array of strings if there are multiple shares per host.
-# Examples:
-#
-# $Conf{SmbShareName} = 'c'; # backup 'c' share
-# $Conf{SmbShareName} = ['c', 'd']; # backup 'c' and 'd' shares
#
-# This setting only matters if $Conf{XferMethod} = 'smb'.
+# Advanced option for asking BackupPC to load additional perl modules.
+# Can be a list (array ref) of module names to load at startup.
#
-$Conf{SmbShareName} = 'C$';
+$Conf{PerlModuleLoad} = undef;
#
-# Smbclient share user name. This is passed to smbclient's -U argument.
-#
-# This setting only matters if $Conf{XferMethod} = 'smb'.
+# Path to init.d script and command to use that script to start the
+# server from the CGI interface. The following variables are substituted
+# at run-time:
#
-$Conf{SmbShareUserName} = '';
-
+# $sshPath path to ssh ($Conf{SshPath})
+# $serverHost same as $Conf{ServerHost}
+# $serverInitdPath path to init.d script ($Conf{ServerInitdPath})
#
-# Smbclient share password. This is passed to smbclient via its PASSWD
-# environment variable. There are several ways you can tell BackupPC
-# the smb share password. In each case you should be very careful about
-# security. If you put the password here, make sure that this file is
-# not readable by regular users! See the "Setting up config.pl" section
-# in the documentation for more information.
+# Example:
#
-# This setting only matters if $Conf{XferMethod} = 'smb'.
+# $Conf{ServerInitdPath} = '/etc/init.d/backuppc';
+# $Conf{ServerInitdStartCmd} = '$sshPath -q -x -l root $serverHost'
+# . ' $serverInitdPath start'
+# . ' < /dev/null >& /dev/null';
#
-$Conf{SmbSharePasswd} = '';
+$Conf{ServerInitdPath} = '';
+$Conf{ServerInitdStartCmd} = '';
-#
-# Which host directories to backup when using tar transport. This can be a
-# string or an array of strings if there are multiple directories to
-# backup per host. Examples:
-#
-# $Conf{TarShareName} = '/'; # backup everything
-# $Conf{TarShareName} = '/home'; # only backup /home
-# $Conf{TarShareName} = ['/home', '/src']; # backup /home and /src
-#
-# The fact this parameter is called 'TarShareName' is for historical
-# consistency with the Smb transport options. You can use any valid
-# directory on the client: there is no need for it to correspond to
-# any Smb share or device mount point.
-#
-# Note also that you can also use $Conf{BackupFilesOnly} to specify
-# a specific list of directories to backup. It's more efficient to
-# use this option instead of $Conf{TarShareName} since a new tar is
-# run for each entry in $Conf{TarShareName}.
-#
-# On the other hand, if you add --one-file-system to $Conf{TarClientCmd}
-# you can backup each file system separately, which makes restoring one
-# bad file system easier. In this case you would list all of the mount
-# points here, since you can't get the same result with
-# $Conf{BackupFilesOnly}:
-#
-# $Conf{TarShareName} = ['/', '/var', '/data', '/boot'];
-#
-# This setting only matters if $Conf{XferMethod} = 'tar'.
-#
-$Conf{TarShareName} = '/';
+###########################################################################
+# What to backup and when to do it
+# (can be overridden in the per-PC config.pl)
+###########################################################################
#
# Minimum period in days between full backups. A full dump will only be
# done if at least this much time has elapsed since the last full dump,
# we keep at least $Conf{FullKeepCntMin} full backups no matter how old
# they are.
#
-# Note that $Conf{FullAgeMax} will be increased to $Conf{FullAgeMax}
-# times $Conf{FullPeriod} if $Conf{FullAgeMax} specifies enough
+# Note that $Conf{FullAgeMax} will be increased to $Conf{FullKeepCnt}
+# times $Conf{FullPeriod} if $Conf{FullKeepCnt} specifies enough
# full backups to exceed $Conf{FullAgeMax}.
#
$Conf{FullKeepCntMin} = 1;
$Conf{BackupZeroFilesIsFatal} = 1;
###########################################################################
-# General per-PC configuration settings
+# How to backup a client
# (can be overridden in the per-PC config.pl)
###########################################################################
#
#
$Conf{XferLogLevel} = 1;
+#
+# Name of the host share that is backed up when using SMB. This can be a
+# string or an array of strings if there are multiple shares per host.
+# Examples:
+#
+# $Conf{SmbShareName} = 'c'; # backup 'c' share
+# $Conf{SmbShareName} = ['c', 'd']; # backup 'c' and 'd' shares
+#
+# This setting only matters if $Conf{XferMethod} = 'smb'.
+#
+$Conf{SmbShareName} = 'C$';
+
+#
+# Smbclient share user name. This is passed to smbclient's -U argument.
+#
+# This setting only matters if $Conf{XferMethod} = 'smb'.
+#
+$Conf{SmbShareUserName} = '';
+
+#
+# Smbclient share password. This is passed to smbclient via its PASSWD
+# environment variable. There are several ways you can tell BackupPC
+# the smb share password. In each case you should be very careful about
+# security. If you put the password here, make sure that this file is
+# not readable by regular users! See the "Setting up config.pl" section
+# in the documentation for more information.
+#
+# This setting only matters if $Conf{XferMethod} = 'smb'.
+#
+$Conf{SmbSharePasswd} = '';
+
#
# Full path for smbclient. Security caution: normal users should not
# allowed to write to this file or directory.
. ' $I_option -U $userName -E -N -d 1'
. ' -c tarmode\\ full -Tx -';
+#
+# Which host directories to backup when using tar transport. This can be a
+# string or an array of strings if there are multiple directories to
+# backup per host. Examples:
+#
+# $Conf{TarShareName} = '/'; # backup everything
+# $Conf{TarShareName} = '/home'; # only backup /home
+# $Conf{TarShareName} = ['/home', '/src']; # backup /home and /src
+#
+# The fact this parameter is called 'TarShareName' is for historical
+# consistency with the Smb transport options. You can use any valid
+# directory on the client: there is no need for it to correspond to
+# any Smb share or device mount point.
+#
+# Note also that you can also use $Conf{BackupFilesOnly} to specify
+# a specific list of directories to backup. It's more efficient to
+# use this option instead of $Conf{TarShareName} since a new tar is
+# run for each entry in $Conf{TarShareName}.
+#
+# On the other hand, if you add --one-file-system to $Conf{TarClientCmd}
+# you can backup each file system separately, which makes restoring one
+# bad file system easier. In this case you would list all of the mount
+# points here, since you can't get the same result with
+# $Conf{BackupFilesOnly}:
+#
+# $Conf{TarShareName} = ['/', '/var', '/data', '/boot'];
+#
+# This setting only matters if $Conf{XferMethod} = 'tar'.
+#
+$Conf{TarShareName} = '/';
+
#
# Full command to run tar on the client. GNU tar is required. You will
# need to fill in the correct paths for ssh2 on the local host (server)
$Conf{PingCmd} = '$pingPath -c 1 $host';
#
-# Path to init.d script and command to use that script to start the
-# server from the CGI interface. The following variables are substituted
-# at run-time:
-#
-# $sshPath path to ssh ($Conf{SshPath})
-# $serverHost same as $Conf{ServerHost}
-# $serverInitdPath path to init.d script ($Conf{ServerInitdPath})
-#
-# Example:
-#
-# $Conf{ServerInitdPath} = '/etc/init.d/backuppc';
-# $Conf{ServerInitdStartCmd} = '$sshPath -q -x -l root $serverHost'
-# . ' $serverInitdPath start'
-# . ' < /dev/null >& /dev/null';
+# Maximum round-trip ping time in milliseconds. This threshold is set
+# to avoid backing up PCs that are remotely connected through WAN or
+# dialup connections. The output from ping -s (assuming it is supported
+# on your system) is used to check the round-trip packet time. On your
+# local LAN round-trip times should be much less than 20msec. On most
+# WAN or dialup connections the round-trip time will be typically more
+# than 20msec. Tune if necessary.
#
-$Conf{ServerInitdPath} = '';
-$Conf{ServerInitdStartCmd} = '';
+$Conf{PingMaxMsec} = 20;
#
# Compression level to use on files. 0 means no compression. Compression
#
$Conf{CompressLevel} = 0;
-#
-# Maximum round-trip ping time in milliseconds. This threshold is set
-# to avoid backing up PCs that are remotely connected through WAN or
-# dialup connections. The output from ping -s (assuming it is supported
-# on your system) is used to check the round-trip packet time. On your
-# local LAN round-trip times should be much less than 20msec. On most
-# WAN or dialup connections the round-trip time will be typically more
-# than 20msec. Tune if necessary.
-#
-$Conf{PingMaxMsec} = 20;
-
#
# Timeout in seconds when listening for the transport program's
# (smbclient, tar etc) stdout. If no output is received during this
$Conf{MaxOldPerPCLogFiles} = 12;
#
-# Optional commands to run before and after dumps and restores.
+# Optional commands to run before and after dumps and restores,
+# and also before and after each share of a dump.
+#
# Stdout from these commands will be written to the Xfer (or Restore)
# log file. One example of using these commands would be to
-# shut down and restart a database server, or to dump a database
-# to files for backup. Example:
+# shut down and restart a database server, dump a database
+# to files for backup, or doing a snapshot of a share prior
+# to a backup. Example:
#
# $Conf{DumpPreUserCmd} = '$sshPath -q -x -l root $host /usr/bin/dumpMysql';
#
# The following variable substitutions are made at run time for
-# $Conf{DumpPreUserCmd} and $Conf{DumpPostUserCmd}:
+# $Conf{DumpPreUserCmd}, $Conf{DumpPostUserCmd}, $Conf{DumpPreShareCmd}
+# and $Conf{DumpPostShareCmd}:
#
# $type type of dump (incr or full)
# $xferOK 1 if the dump succeeded, 0 if it didn't
# $hostIP IP address of host
# $user user name from the hosts file
# $moreUsers list of additional users from the hosts file
-# $share the first share name
+# $share the first share name (or current share for
+# $Conf{DumpPreShareCmd} and $Conf{DumpPostShareCmd})
# $shares list of all the share names
# $XferMethod value of $Conf{XferMethod} (eg: tar, rsync, smb)
# $sshPath value of $Conf{SshPath},
#
$Conf{DumpPreUserCmd} = undef;
$Conf{DumpPostUserCmd} = undef;
+$Conf{DumpPreShareCmd} = undef;
+$Conf{DumpPostShareCmd} = undef;
$Conf{RestorePreUserCmd} = undef;
$Conf{RestorePostUserCmd} = undef;
$Conf{ArchivePreUserCmd} = undef;
#
$Conf{ClientNameAlias} = undef;
-#
-# Advanced option for asking BackupPC to load additional perl modules.
-# Can be a list (array ref) of module names to load at startup.
-#
-$Conf{PerlModuleLoad} = undef;
-
###########################################################################
# Email reminders, status and messages
# (can be overridden in the per-PC config.pl)
#
# Language to use. See lib/BackupPC/Lang for the list of supported
# languages, which include English (en), French (fr), Spanish (es),
-# German (de), Italian (it) and Dutch (nl).
+# German (de), Italian (it), Dutch (nl) and Portuguese Brazillian
+# (pt_br).
#
# Currently the Language setting applies to the CGI interface and email
# messages sent to users. Log files and other text are still in English.
# $Conf{CgiImageDirURL} URL.
#
$Conf{CgiCSSFile} = 'BackupPC_stnd.css';
+
+#
+# Which per-host config variables a non-admin user is allowed
+# to edit.
+#
+$Conf{CgiUserConfigEdit} = {
+ FullPeriod => 1,
+ IncrPeriod => 1,
+ FullKeepCnt => 1,
+ FullKeepCntMin => 1,
+ FullAgeMax => 1,
+ IncrKeepCnt => 1,
+ IncrKeepCntMin => 1,
+ IncrAgeMax => 1,
+ PartialAgeMax => 1,
+ IncrFill => 1,
+ RestoreInfoKeepCnt => 1,
+ ArchiveInfoKeepCnt => 1,
+ BackupFilesOnly => 1,
+ BackupFilesExclude => 1,
+ BlackoutBadPingLimit => 1,
+ BlackoutGoodCnt => 1,
+ BlackoutPeriods => 1,
+ BackupZeroFilesIsFatal => 1,
+ XferMethod => 1,
+ XferLogLevel => 1,
+ SmbShareName => 1,
+ SmbShareUserName => 1,
+ SmbSharePasswd => 1,
+ TarShareName => 1,
+ TarFullArgs => 1,
+ TarIncrArgs => 1,
+ RsyncShareName => 1,
+ RsyncdClientPort => 1,
+ RsyncdPasswd => 1,
+ RsyncdAuthRequired => 1,
+ RsyncCsumCacheVerifyProb => 1,
+ RsyncArgs => 1,
+ RsyncRestoreArgs => 1,
+ ArchiveDest => 1,
+ ArchiveComp => 1,
+ ArchivePar => 1,
+ ArchiveSplit => 1,
+ FixedIPNetBiosNameCheck => 1,
+ PingMaxMsec => 1,
+ ClientTimeout => 1,
+ MaxOldPerPCLogFiles => 1,
+ CompressLevel => 1,
+ ClientNameAlias => 1,
+ EMailNotifyMinDays => 1,
+ EMailFromUserName => 1,
+ EMailAdminUserName => 1,
+ EMailUserDestDomain => 1,
+ EMailNoBackupEverSubj => 1,
+ EMailNoBackupEverMesg => 1,
+ EMailNotifyOldBackupDays => 1,
+ EMailNoBackupRecentSubj => 1,
+ EMailNoBackupRecentMesg => 1,
+ EMailNotifyOldOutlookDays => 1,
+ EMailOutlookBackupSubj => 1,
+ EMailOutlookBackupMesg => 1,
+};
projects / BackupPC.git / blobdiff