# This limit is to make sure BackupPC doesn't fall too far behind in
# running BackupPC_link commands.
#
-$Conf{MaxPendingCmds} = 10;
+$Conf{MaxPendingCmds} = 15;
+
+#
+# Nice level at which CmdQueue commands (eg: BackupPC_link and
+# BackupPC_nightly) are run at.
+#
+$Conf{CmdQueueNice} = 10;
#
# How many BackupPC_nightly processes to run in parallel.
# with configure.pl to change InstallDir.
# CgiDir - Apache CGI directory for BackupPC_Admin
#
+# Note: it is STRONGLY recommended that you don't change the
+# values here. These are set at installation time and are here
+# for reference and are used during upgrades.
+#
+# Instead of changing TopDir here it is recommended that you use
+# a symbolic link to the new location, or mount the new BackupPC
+# store at the existing $Conf{TopDir} setting.
+#
$Conf{TopDir} = '';
$Conf{ConfDir} = '';
$Conf{LogDir} = '';
#
$Conf{ClientCharsetLegacy} = 'iso-8859-1';
+###########################################################################
+# Samba Configuration
+# (can be overwritten in the per-PC log file)
+###########################################################################
#
# Name of the host share that is backed up when using SMB. This can be a
# string or an array of strings if there are multiple shares per host.
. ' $I_option -U $userName -E -N -d 1'
. ' -c tarmode\\ full -Tx -';
+###########################################################################
+# Tar Configuration
+# (can be overwritten in the per-PC log file)
+###########################################################################
#
# Which host directories to backup when using tar transport. This can be a
# string or an array of strings if there are multiple directories to
#
$Conf{TarClientPath} = '';
+###########################################################################
+# Rsync/Rsyncd Configuration
+# (can be overwritten in the per-PC log file)
+###########################################################################
#
# Path to rsync executable on the client
#
#
];
+###########################################################################
+# FTP Configuration
+# (can be overwritten in the per-PC log file)
+##########################################################################
#
-# Share name to backup. For $Conf{XferMethod} = "backuppcd" this should
-# be a file system path, eg '/' or '/home'.
+# Name of the host share that is backed up when using FTP. This can be a
+# string or an array of strings if there are multiple shares per host.
+# Examples:
#
-# This can also be a list of multiple file system paths or modules.
-# (Can it??)
+# $Conf{FtpShareName} = 'c'; # backup 'c' share
+# $Conf{FtpShareName} = ['c', 'd']; # backup 'c' and 'd' shares
#
-# $Conf{BackupPCdShareName} = ['/', '/var', '/data', '/boot'];
+# This setting only matters if $Conf{XferMethod} = 'ftp'.
#
-$Conf{BackupPCdShareName} = '/';
+$Conf{FtpShareName} = '';
#
-# Path to backuppcd executable on the server
+# FTP user name. This is used to log into the server.
#
-$Conf{BackupPCdPath} = '';
+# This setting is used only if $Conf{XferMethod} = 'ftp'.
+#
+$Conf{FtpUserName} = '';
#
-# Full command to run backuppcd on the server to backup a given
-# client machine. The following variables are substituted at
-# run-time (TODO: update this list)
+# FTP user password. This is used to log into the server.
#
-# $host host name being backed up
-# $hostIP host's IP address
-# $shareName share name to backup (ie: top-level directory path)
-# $backuppcdPath same as $Conf{BackupPCdPath}
-# $sshPath same as $Conf{SshPath}
+# This setting is used only if $Conf{XferMethod} = 'ftp'.
#
-# This setting only matters if $Conf{XferMethod} = 'backuppcd'.
+$Conf{FtpPasswd} = '';
+
#
-# Arguments to backupcpd are:
+# Transfer block size. This sets the size of the amounts of data in
+# each frame. While undefined, this value takes the default value.
#
-# - the host name to backup
-# - the share name to backup
-# - the directory where the pool is
-# - the directory where the last run was (NOT DONE YET)
-# - a boolean value indicating whether or not the pool is
-# compressed or not
-# - the directory where the new run should occur (currently it assumes ".")
+# This setting is used only if $Conf{XferMethod} = 'ftp'.
#
-$Conf{BackupPCdCmd} = '$bpcdPath $host $shareName $poolDir XXXX $poolCompress $topDir/pc/$client/new';
+$Conf{FtpBlockSize} = 10240;
#
-# Full command to run backuppcd on the server for restore to a
-# client machine. The following variables are substituted at
-# run-time (TODO: update this list)
+# The port of the ftp server. If undefined, 21 is used.
#
-# $host host name being backed up
-# $hostIP host's IP address
-# $shareName share name to backup (ie: top-level directory path)
-# $backuppcdPath same as $Conf{BackupPCdPath}
-# $sshPath same as $Conf{SshPath}
+# This setting is used only if $Conf{XferMethod} = 'ftp'.
+#
+$Conf{FtpPort} = 21;
+
#
-# This setting only matters if $Conf{XferMethod} = 'backuppcd'.
+# Connection timeout for FTP. When undefined, the default is 120 seconds.
#
-# Note: all Cmds are executed directly without a shell, so the prog name
-# needs to be a full path and you can't include shell syntax like
-# redirection and pipes; put that in a script if you need it.
+# This setting is used only if $Conf{XferMethod} = 'ftp'.
#
-$Conf{BackupPCdRestoreCmd} = '$bpcdPath TODO';
+$Conf{FtpTimeout} = 120;
+#
+# Behaviour when BackupPC encounters symlinks on the FTP share.
+#
+# Symlinks cannot be restored via FTP, so the desired behaviour will
+# be different depending on the setup of the share. The default for
+# this behavor is 1. Directory shares with more complicated directory
+# structures should consider other protocols.
+#
+$Conf{FtpFollowSymlinks} = 0;
+###########################################################################
+# Archive Configuration
+# (can be overwritten in the per-PC log file)
+###########################################################################
#
# Archive Destination
#
$Conf{EMailOutlookBackupMesg} = undef;
#
-# Additional email headers. If you change the charset
-# to utf8 then BackupPC_sendEmail will use utf8 for
-# the email body.
+# Additional email headers. This sets to charset to
+# utf8.
#
$Conf{EMailHeaders} = <<EOF;
MIME-Version: 1.0
-Content-Type: text/plain; charset="iso-8859-1"
+Content-Type: text/plain; charset="utf-8"
EOF
###########################################################################
# used by configure.pl when you upgrade BackupPC.
#
# Example:
-# $Conf{CgiImageDir} = '/usr/local/apache/htdocs/BackupPC';
+# $Conf{CgiImageDir} = '/var/www/htdocs/BackupPC';
#
$Conf{CgiImageDir} = '';
RsyncClientCmd => 0,
RsyncClientRestoreCmd => 0,
RsyncClientPath => 0,
+ FtpShareName => 1,
+ FtpUserName => 1,
+ FtpPasswd => 1,
+ FtpBlockSize => 1,
+ FtpPort => 1,
+ FtpTimeout => 1,
ArchiveDest => 1,
ArchiveComp => 1,
ArchivePar => 1,
projects / BackupPC.git / blobdiff