X-Git-Url: http://git.rot13.org/?p=BackupPC.git;a=blobdiff_plain;f=bin%2FBackupPC_dump;h=988d3a6be4073c517af84500f8a52c2ddc5f4902;hp=0971f9ec71f51be4339592e6b065ca2420a938c7;hb=f9796d809e6a7d4ed2c356f0f32f1a3d628d3d1f;hpb=f076585d3ff9dfe6de32292b897e293008efe74e diff --git a/bin/BackupPC_dump b/bin/BackupPC_dump index 0971f9e..988d3a6 100755 --- a/bin/BackupPC_dump +++ b/bin/BackupPC_dump @@ -1,11 +1,11 @@ -#!/bin/perl +#!/usr/bin/perl #============================================================= -*-perl-*- # # BackupPC_dump: Dump a single client. # # DESCRIPTION # -# Usage: BackupPC_dump [-i] [-f] [-d] [-e] [-v] +# Usage: BackupPC_dump [-i] [-f] [-F] [-I] [-d] [-e] [-v] # # Flags: # @@ -14,6 +14,13 @@ # # -f Do a full dump, overriding any scheduling. # +# -I Do an increment dump if the regular schedule requires a +# full or incremental, otherwise do nothing (a full is done +# if no dumps have yet succeeded) +# +# -F Do a full dump if the regular schedule requires a +# full or incremental, otherwise do nothing +# # -d Host is a DHCP pool address, and the client argument # just an IP address. We lookup the NetBios name from # the IP address. @@ -52,7 +59,7 @@ # Craig Barratt # # COPYRIGHT -# Copyright (C) 2001-2007 Craig Barratt +# Copyright (C) 2001-2009 Craig Barratt # # This program is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by @@ -70,7 +77,7 @@ # #======================================================================== # -# Version 3.2.0, released 31 Dec 2008. +# Version 3.2.0, released 31 Jul 2010. # # See http://backuppc.sourceforge.net. # @@ -105,14 +112,19 @@ my $Abort; $bpc->ChildInit(); my %opts; -if ( !getopts("defiv", \%opts) || @ARGV != 1 ) { - print("usage: $0 [-d] [-e] [-f] [-i] [-v] \n"); +if ( !getopts("defivFI", \%opts) || @ARGV != 1 ) { + print("usage: $0 [-d] [-e] [-f] [-i] [-F] [-I] [-v] \n"); exit(1); } if ( $ARGV[0] !~ /^([\w\.\s-]+)$/ ) { print("$0: bad client name '$ARGV[0]'\n"); exit(1); } +if ( (defined($opts{f}) + defined($opts{i}) + defined($opts{F}) + defined($opts{I})) > 1 ) { + print("$0: exiting because you can only use one of -f, -i, -F, and -I\n"); + exit(1); +} + my $client = $1; # BackupPC's client name (might not be real host name) my $hostIP; # this is the IP address my $host; # this is the real host name @@ -158,6 +170,7 @@ if ( !defined($Hosts->{$client}) ) { my $Dir = "$TopDir/pc/$client"; my @xferPid = (); my $tarPid = -1; +my $completionPercent; # # Re-read config file, so we can include the PC-specific config @@ -234,33 +247,6 @@ if ($Conf{XferMethod} eq "archive" ) { exit(0); } -if ( !$opts{d} && !$Conf{BackupsDisable} ) { - # - # In the non-DHCP case, make sure the host can be looked up - # via NS, or otherwise find the IP address via NetBios. - # - if ( $Conf{ClientNameAlias} ne "" ) { - $host = $Conf{ClientNameAlias}; - } else { - $host = $client; - } - if ( !defined(gethostbyname($host)) ) { - # - # Ok, NS doesn't know about it. Maybe it is a NetBios name - # instead. - # - print(STDERR "Name server doesn't know about $host; trying NetBios\n") - if ( $opts{v} ); - if ( !defined($hostIP = $bpc->NetBiosHostIPFind($host)) ) { - print(LOG $bpc->timeStamp, "Can't find host $host via netbios\n"); - print("host not found\n"); - exit(1); - } - } else { - $hostIP = $host; - } -} - ########################################################################### # Figure out what to do and do it ########################################################################### @@ -341,6 +327,7 @@ if ( !$opts{i} && !$opts{f} && $Conf{BlackoutGoodCnt} >= 0 || !defined($p->{hourBegin}) || !defined($p->{hourEnd}) ); + my $matchWday = $wday; if ( $p->{hourBegin} > $p->{hourEnd} ) { $blackout = $p->{hourBegin} <= $currHours || $currHours <= $p->{hourEnd}; @@ -350,14 +337,14 @@ if ( !$opts{i} && !$opts{f} && $Conf{BlackoutGoodCnt} >= 0 # weekday check (eg: Monday 11pm-1am means Monday 2300 to # Tuesday 0100, not Monday 2300-2400 plus Monday 0000-0100). # - $wday--; - $wday += 7 if ( $wday < 0 ); + $matchWday--; + $matchWday += 7 if ( $matchWday < 0 ); } } else { $blackout = $p->{hourBegin} <= $currHours && $currHours <= $p->{hourEnd}; } - if ( $blackout && grep($_ == $wday, @{$p->{weekDays}}) ) { + if ( $blackout && grep($_ == $matchWday, @{$p->{weekDays}}) ) { # print(LOG $bpc->timeStamp, "skipping because of blackout" # . " (alive $StatusHost{aliveCnt} times)\n"); print(STDERR "Skipping $client because of blackout\n") @@ -413,15 +400,21 @@ for ( my $i = 0 ; $i < @Backups ; $i++ ) { # # Decide whether we do nothing, or a full or incremental backup. # -if ( @Backups == 0 +my $needs_full = (time - $lastFullTime > $Conf{FullPeriod} * 24 * 3600 + && time - $lastIncrTime > $Conf{IncrPeriod} * 24 * 3600); +my $needs_incr = (time - $lastIncrTime > $Conf{IncrPeriod} * 24 * 3600 + && time - $lastFullTime > $Conf{IncrPeriod} * 24 * 3600); + +if ( $lastFullTime == 0 || $opts{f} - || (!$opts{i} && (time - $lastFullTime > $Conf{FullPeriod} * 24*3600 - && time - $lastIncrTime > $Conf{IncrPeriod} * 24*3600)) ) { + || (!$opts{i} && !$opts{I} && $needs_full) + || ( $opts{F} && $needs_incr) ) { $type = "full"; $incrLevel = 0; $incrBaseBkupNum = $lastBkupNum; -} elsif ( $opts{i} || (time - $lastIncrTime > $Conf{IncrPeriod} * 24*3600 - && time - $lastFullTime > $Conf{IncrPeriod} * 24*3600) ) { +} elsif ( $opts{i} + || $needs_incr + || ($opts{I} && $needs_full) ) { $type = "incr"; # # For an incremental backup, figure out which level we should @@ -490,6 +483,33 @@ if ( !$bpc->HardlinkTest($Dir, "$TopDir/cpool") ) { exit(1); } +if ( !$opts{d} ) { + # + # In the non-DHCP case, make sure the host can be looked up + # via NS, or otherwise find the IP address via NetBios. + # + if ( $Conf{ClientNameAlias} ne "" ) { + $host = $Conf{ClientNameAlias}; + } else { + $host = $client; + } + if ( !defined(gethostbyname($host)) ) { + # + # Ok, NS doesn't know about it. Maybe it is a NetBios name + # instead. + # + print(STDERR "Name server doesn't know about $host; trying NetBios\n") + if ( $opts{v} ); + if ( !defined($hostIP = $bpc->NetBiosHostIPFind($host)) ) { + print(LOG $bpc->timeStamp, "Can't find host $host via netbios\n"); + print("host not found\n"); + exit(1); + } + } else { + $hostIP = $host; + } +} + # # Check if $host is alive # @@ -594,14 +614,16 @@ UserCommandRun("DumpPreUserCmd"); if ( $? && $Conf{UserCmdCheckStatus} ) { print(LOG $bpc->timeStamp, "DumpPreUserCmd returned error status $?... exiting\n"); - print("dump failed: DumpPreUserCmd returned error status $?\n"); - exit(1); + $XferLOG->write(\"DumpPreUserCmd returned error status $?... exiting\n"); + $stat{hostError} = "DumpPreUserCmd returned error status $?"; + BackupFailCleanup(); } $NeedPostCmd = 1; # # Now backup each of the shares # +my $shareDuplicate = {}; for my $shareName ( @$ShareNames ) { local(*RH, *WH); @@ -611,29 +633,37 @@ for my $shareName ( @$ShareNames ) { $shareName = encode("utf8", $shareName); $stat{xferOK} = $stat{hostAbort} = undef; $stat{hostError} = $stat{lastOutputLine} = undef; - if ( -d "$Dir/new/$shareName" ) { + if ( $shareName eq "" ) { + print(LOG $bpc->timeStamp, + "unexpected empty share name skipped\n"); + next; + } + if ( $shareDuplicate->{$shareName} ) { print(LOG $bpc->timeStamp, "unexpected repeated share name $shareName skipped\n"); next; } + $shareDuplicate->{$shareName} = 1; UserCommandRun("DumpPreShareCmd", $shareName); if ( $? && $Conf{UserCmdCheckStatus} ) { print(LOG $bpc->timeStamp, "DumpPreShareCmd returned error status $?... exiting\n"); - print("dump failed: DumpPreShareCmd returned error status $?\n"); UserCommandRun("DumpPostUserCmd") if ( $NeedPostCmd ); - exit(1); + $XferLOG->write(\"DumpPreShareCmd returned error status $?... exiting\n"); + $stat{hostError} = "DumpPreShareCmd returned error status $?"; + BackupFailCleanup(); } $xfer = BackupPC::Xfer::create($Conf{XferMethod}, $bpc); if ( !defined($xfer) ) { my $errStr = BackupPC::Xfer::errStr(); print(LOG $bpc->timeStamp, "dump failed: $errStr\n"); - print("dump failed: $errStr\n"); UserCommandRun("DumpPostShareCmd", $shareName) if ( $NeedPostCmd ); UserCommandRun("DumpPostUserCmd") if ( $NeedPostCmd ); - exit(1); + $XferLOG->write(\"BackupPC::Xfer::create failed: $errStr\n"); + $stat{hostError} = $errStr; + BackupFailCleanup(); } my $useTar = $xfer->useTar; @@ -723,14 +753,14 @@ for my $shareName ( @$ShareNames ) { compress => $Conf{CompressLevel}, XferMethod => $Conf{XferMethod}, logLevel => $Conf{XferLogLevel}, - pidHandler => \&pidHandler, partialNum => $partialNum, + pidHandler => \&pidHandler, + completionPercent => \&completionPercent, }); if ( !defined($logMsg = $xfer->start()) ) { - print(LOG $bpc->timeStamp, "xfer start failed: ", $xfer->errStr, "\n"); - print("dump failed: ", $xfer->errStr, "\n"); - print("link $clientURI\n") if ( $needLink ); + my $errStr = "xfer start failed: " . $xfer->errStr . "\n"; + print(LOG $bpc->timeStamp, $errStr); # # kill off the tar process, first nicely then forcefully # @@ -746,7 +776,9 @@ for my $shareName ( @$ShareNames ) { } UserCommandRun("DumpPostShareCmd", $shareName) if ( $NeedPostCmd ); UserCommandRun("DumpPostUserCmd") if ( $NeedPostCmd ); - exit(1); + $XferLOG->write(\"xfer start failed: $errStr\n"); + $stat{hostError} = $errStr; + BackupFailCleanup(); } @xferPid = $xfer->xferPid; @@ -890,6 +922,10 @@ for my $shareName ( @$ShareNames ) { # last; } + # + # Wait for any child processes to exit + # + # 1 while ( wait() >= 0 ); } # @@ -1564,7 +1600,7 @@ sub CorrectHostCheck || $Conf{NmbLookupCmd} eq "" ); my($netBiosHost, $netBiosUser) = $bpc->NetBiosInfoGet($hostIP); return "host $host has mismatching netbios name $netBiosHost" - if ( $netBiosHost ne $host ); + if ( lc($netBiosHost) ne lc(substr($host, 0, 15)) ); return; } @@ -1585,6 +1621,23 @@ sub pidHandler print("xferPids $str\n"); } +# +# The Xfer method might tell us from time to time about progress +# in the backup or restore +# +sub completionPercent +{ + my($percent) = @_; + + $percent = 100 if ( $percent > 100 ); + $percent = 0 if ( $percent < 0 ); + if ( !defined($completionPercent) + || int($completionPercent + 0.5) != int($percent) ) { + printf("completionPercent %.0f\n", $percent); + } + $completionPercent = $percent; +} + # # Run an optional pre- or post-dump command #