From 1282f5f90cf092cb406ee186e6bf328875e4c306 Mon Sep 17 00:00:00 2001 From: cbarratt Date: Sun, 11 Aug 2002 05:00:55 +0000 Subject: [PATCH] * Added internationalization (i18n) code from Xavier Nicollet. Voila! BackupPC_Admin now supports English and French, and adding more languages is now easy. * Added patch from Toby Johnson that allows additional users to be specified in the hosts file; these users can also view/start/stop and restore backups for that host. Also added a new config setting $Conf{CgiNavBarAdminAllHosts} that allows all hosts to be listed in the left nav bar for admins. * Added "PerlTaintCheck On" to the mod_perl section in the docs, suggested by Tim Demarest. --- CVS_README | 43 ++ ChangeLog | 19 +- cgi-bin/BackupPC_Admin | 1101 ++++++++++----------------------------- configure.pl | 6 +- doc-src/BackupPC.pod | 857 +----------------------------- lib/BackupPC/Lang/en.pm | 906 ++++++++++++++++++++++++++++++++ lib/BackupPC/Lang/fr.pm | 932 +++++++++++++++++++++++++++++++++ lib/BackupPC/Lib.pm | 25 +- makeDist | 2 + 9 files changed, 2207 insertions(+), 1684 deletions(-) create mode 100644 CVS_README create mode 100644 lib/BackupPC/Lang/en.pm create mode 100644 lib/BackupPC/Lang/fr.pm diff --git a/CVS_README b/CVS_README new file mode 100644 index 0000000..8a061d4 --- /dev/null +++ b/CVS_README @@ -0,0 +1,43 @@ +#======================================================================== +# +# CVS_README - CVS README file for BackupPC. +# +# DESCRIPTION +# Instructions for using CVS +# +# AUTHOR +# Craig Barratt +# +#======================================================================== +# +# See http://backuppc.sourceforge.net. +# +#======================================================================== + +Fetching CVS: +------------ + +* To fetch the current CVS code run this commands: + + mkdir somewhere/BackupPC + cd somewhere/BackupPC + cvs -z3 -d:pserver:anonymous@cvs.backuppc.sourceforge.net:/cvsroot/backuppc co BackupPC + +* To fetch the CVS code tagged at a particular release (eg: v1.5.0): + + cvs -z3 -d:pserver:anonymous@cvs.backuppc.sourceforge.net:/cvsroot/backuppc co -r v1_5_0 BackupPC + +Building an installable release from the source: +----------------------------------------------- + +* Edit makeDist and set the version number and release date + +* Update makeDist and configure.pl if you add any new files to the release. + +* Run makeDist. makeDist merges the version number, release date and turns + all the library paths etc back into the symbolic form (eg: __INSTALLDIR__) + so that configure.pl will do the right thing. + +* You should now have a sub-directory dist/BackupPC-version containing + the release and a tar ball dist/BackupPC-version.tar.gz. The tar + ball can be copied, extracted and installed like any BackupPC release. diff --git a/ChangeLog b/ChangeLog index 4c3e959..e5e0dbd 100644 --- a/ChangeLog +++ b/ChangeLog @@ -11,12 +11,29 @@ # #======================================================================== # -# Version 1.5.0, released 2 Aug 2002. +# Version __VERSION__, released __RELEASEDATE__. # # See http://backuppc.sourceforge.net. # #======================================================================== +#------------------------------------------------------------------------ +# Version __VERSION__, __RELEASEDATE__ +#------------------------------------------------------------------------ + +* Added internationalization (i18n) code from Xavier Nicollet. + Voila! BackupPC_Admin now supports English and French, and + adding more languages is now easy. + +* Added patch from Toby Johnson that allows additional users to be + specified in the hosts file; these users can also view/start/stop + and restore backups for that host. Also added a new config + setting $Conf{CgiNavBarAdminAllHosts} that allows all hosts to + be listed in the left nav bar for admins. + +* Added "PerlTaintCheck On" to the mod_perl section in the docs, + suggested by Tim Demarest. + #------------------------------------------------------------------------ # Version 1.5.0, 2 Aug 2002 #------------------------------------------------------------------------ diff --git a/cgi-bin/BackupPC_Admin b/cgi-bin/BackupPC_Admin index c0c2af0..ccdb618 100755 --- a/cgi-bin/BackupPC_Admin +++ b/cgi-bin/BackupPC_Admin @@ -1,4 +1,4 @@ -#!/bin/perl -T +#!/usr/bin/perl -T #============================================================= -*-perl-*-w # # BackupPC_Admin: Apache/CGI interface for BackupPC. @@ -38,7 +38,7 @@ # #======================================================================== # -# Version 1.5.0, released 2 Aug 2002. +# Version 1.5.0beta0, released 30 Jun 2002. # # See http://backuppc.sourceforge.net. # @@ -46,7 +46,7 @@ use strict; use CGI; -use lib "__INSTALLDIR__/lib"; +use lib "/usr/local/BackupPC/lib"; use BackupPC::Lib; use BackupPC::FileZIO; use BackupPC::Attrib qw(:all); @@ -58,6 +58,8 @@ use vars qw(%Status %Info %Jobs @BgQueue @UserQueue @CmdQueue use vars qw($Hosts $HostsMTime $ConfigMTime $PrivAdmin); use vars qw(%UserEmailInfo $UserEmailInfoMTime %RestoreReq); +use vars qw ($Lang); + $Cgi = new CGI; %In = $Cgi->Vars; @@ -71,16 +73,18 @@ $MyURL = $ENV{SCRIPT_NAME}; $User = $ENV{REMOTE_USER}; if ( !defined($bpc) ) { - ErrorExit("BackupPC::Lib->new failed: check apache error_log\n") - if ( !($bpc = BackupPC::Lib->new) ); + ErrorExit($Lang->{BackupPC__Lib__new_failed__check_apache_error_log}) + if ( !($bpc = BackupPC::Lib->new) ); $TopDir = $bpc->TopDir(); $BinDir = $bpc->BinDir(); %Conf = $bpc->Conf(); + $Lang = $bpc->Lang(); $ConfigMTime = $bpc->ConfigMTime(); } elsif ( $bpc->ConfigMTime() != $ConfigMTime ) { $bpc->ConfigRead(); %Conf = $bpc->Conf(); $ConfigMTime = $bpc->ConfigMTime(); + $Lang = $bpc->Lang(); } # @@ -94,36 +98,41 @@ $ENV{PATH} = $Conf{MyPath}; # if ( $Conf{BackupPCUserVerify} && $> != (my $uid = (getpwnam($Conf{BackupPCUser}))[2]) ) { - ErrorExit("Wrong user: my userid is $>, instead of $uid" - . " ($Conf{BackupPCUser})\n"); + ErrorExit(eval("qq{$Lang->{Wrong_user__my_userid_is___}}")); } if ( !defined($Hosts) || $bpc->HostsMTime() != $HostsMTime ) { $HostsMTime = $bpc->HostsMTime(); $Hosts = $bpc->HostInfoRead(); + + # turn operators list into a hash for quick lookups + foreach my $host (keys %$Hosts) { + $Hosts->{$host}{moreUsers} = + {map {$_, 1} split(",", $Hosts->{$host}{moreUsers}) } + } } my %ActionDispatch = ( - "summary" => \&Action_Summary, - "Start Incr Backup" => \&Action_StartStopBackup, - "Start Full Backup" => \&Action_StartStopBackup, - "Stop/Dequeue Backup" => \&Action_StartStopBackup, - "queue" => \&Action_Queue, - "view" => \&Action_View, - "LOGlist" => \&Action_LOGlist, - "emailSummary" => \&Action_EmailSummary, - "browse" => \&Action_Browse, - "Restore" => \&Action_Restore, - "RestoreFile" => \&Action_RestoreFile, - "hostInfo" => \&Action_HostInfo, - "generalInfo" => \&Action_GeneralInfo, - "restoreInfo" => \&Action_RestoreInfo, + "summary" => \&Action_Summary, + $Lang->{Start_Incr_Backup} => \&Action_StartStopBackup, + $Lang->{Start_Full_Backup} => \&Action_StartStopBackup, + $Lang->{Stop_Dequeue_Backup} => \&Action_StartStopBackup, + "queue" => \&Action_Queue, + "view" => \&Action_View, + "LOGlist" => \&Action_LOGlist, + "emailSummary" => \&Action_EmailSummary, + "browse" => \&Action_Browse, + $Lang->{Restore} => \&Action_Restore, + "RestoreFile" => \&Action_RestoreFile, + $Lang->{hostInfo} => \&Action_HostInfo, + "generalInfo" => \&Action_GeneralInfo, + "restoreInfo" => \&Action_RestoreInfo, ); # # Set default actions, then call sub handler # -$In{action} ||= "hostInfo" if ( defined($In{host}) ); +$In{action} ||= $Lang->{hostInfo} if ( defined($In{host}) ); $In{action} = "generalInfo" if ( !defined($ActionDispatch{$In{action}}) ); $ActionDispatch{$In{action}}(); exit(0); @@ -142,7 +151,7 @@ sub Action_Summary my $Privileged = CheckPermission(); if ( !$Privileged ) { - ErrorExit("Only privileged users can view PC summaries." ); + ErrorExit($Lang->{Only_privileged_users_can_view_PC_summaries} ); } foreach my $host ( sort(keys(%Status)) ) { my($fullDur, $incrCnt, $incrAge, $fullSize, $fullRate); @@ -182,6 +191,7 @@ sub Action_Summary $fullTot += $fullCnt; $incrTot += $incrCnt; $fullSize = sprintf("%.2f", $fullSize / 1000); + if (! $incrAge) { $incrAge = " "; } $str = < ${HostLink($host)} ${UserLink($Hosts->{$host}{user})} @@ -206,119 +216,52 @@ EOF $incrSizeTot = sprintf("%.2f", $incrSizeTot / 1000); my $now = timeStamp2(time); - Header("BackupPC: Server Summary"); + Header($Lang->{BackupPC__Server_Summary}); + print eval ("qq{$Lang->{BackupPC_Summary}}"); - print < -This status was generated at $now. -

- -${h2("Hosts with good Backups")} -

-There are $hostCntGood hosts that have been backed up, for a total of: -

    -
  • $fullTot full backups of total size ${fullSizeTot}GB - (prior to pooling and compression), -
  • $incrTot incr backups of total size ${incrSizeTot}GB - (prior to pooling and compression). -
- - - - - - - - - - - -$strGood -
Host User #Full Full Age/days Full Size/GB Speed MB/sec #Incr Incr Age/days State Last attempt
-

- -${h2("Hosts with no Backups")} -

-There are $hostCntNone hosts with no backups. -

- - - - - - - - - - - -$strNone -
Host User #Full Full Age/days Full Size/GB Speed MB/sec #Incr Incr Age/days Current State Last backup attempt
-EOF Trailer(); } sub Action_StartStopBackup { my($str, $reply); - my $start = 1 if ( $In{action} eq "Start Incr Backup" - || $In{action} eq "Start Full Backup" ); - my $doFull = $In{action} eq "Start Full Backup" ? 1 : 0; + + my $start = 1 if ( $In{action} eq $Lang->{Start_Incr_Backup} + || $In{action} eq $Lang->{Start_Full_Backup} ); + my $doFull = $In{action} eq $Lang->{Start_Full_Backup} ? 1 : 0; my $type = $doFull ? "full" : "incremental"; my $host = $In{host}; my $Privileged = CheckPermission($host); if ( !$Privileged ) { - ErrorExit("Only privileged users can stop or start backups on" - . " ${EscapeHTML($host)}."); + ErrorExit(eval("qq{$Lang->{Only_privileged_users_can_stop_or_start_backups}}")); } ServerConnect(); if ( $In{doit} ) { if ( $start ) { if ( $Hosts->{$host}{dhcp} ) { - $reply = $bpc->ServerMesg("backup $In{hostIP} $host" - . " $User $doFull"); - $str = "Backup requested on DHCP $host ($In{hostIP}) by" - . " $User from $ENV{REMOTE_ADDR}"; + $reply = $bpc->ServerMesg(eval("qq{$Lang->{backup__In_hostIP___host}}")); + $str = eval("qq{$Lang->{Backup_requested_on_DHCP__host}}"); } else { - $reply = $bpc->ServerMesg("backup $host $host $User $doFull"); - $str = "Backup requested on $host by $User"; + $reply = $bpc->ServerMesg(eval("qq{$Lang->{backup__host__host__User__doFull}}")); + $str = eval("qq{$Lang->{Backup_requested_on__host_by__User}}"); } } else { - $reply = $bpc->ServerMesg("stop $host $User $In{backoff}"); - $str = "Backup stopped/dequeued on $host by $User"; + $reply = $bpc->ServerMesg(eval("qq{$Lang->{stop__host__User__In_backoff}}")); + $str = eval("qq{$Lang->{Backup_stopped_dequeued_on__host_by__User}}"); } - Header("BackupPC: Backup Requested on $host"); - print < -Reply from server was: $reply -

-Go back to $host home page. -EOF + + Header(eval ("qq{$Lang->{BackupPC__Backup_Requested_on__host}}") ); + print (eval ("qq{$Lang->{REPLY_FROM_SERVER}}")); + Trailer(); } else { if ( $start ) { my $ipAddr = ConfirmIPAddress($host); - Header("BackupPC: Start Backup Confirm on $host"); - print < -You are about to start a $type backup on $host. - -

- - - -Do you really want to do this? - - -
-EOF + Header($Lang->{BackupPC__Start_Backup_Confirm_on__host}); + print (eval ("qq{$Lang->{Are_you_sure_start}}")); } else { my $backoff = ""; GetStatusInfo("host($host)"); @@ -326,23 +269,8 @@ EOF $backoff = sprintf("%.1f", ($StatusHost{backoffTime} - time) / 3600); } - Header("BackupPC: Stop Backup Confirm on $host"); - print < -You are about to stop/dequeue backups on $host; - -
- - -Also, please don't start another backup for - hours. -

-Do you really want to do this? - - -

-EOF + Header($Lang->{BackupPC__Stop_Backup_Confirm_on__host}); + print (eval ("qq{$Lang->{Are_you_sure_stop}}")); } Trailer(); } @@ -356,7 +284,7 @@ sub Action_Queue my $Privileged = CheckPermission(); if ( !$Privileged ) { - ErrorExit("Only privileged users can view queues." ); + ErrorExit($Lang->{Only_privileged_users_can_view_queues_}); } while ( @BgQueue ) { @@ -388,43 +316,10 @@ EOF $cmd EOF } - Header("BackupPC: Queue Summary"); - print < -${h2("User Queue Summary")} -

-The following user requests are currently queued: - - - - -$strUser -
Host Req Time User
-

- -${h2("Background Queue Summary")} -

-The following background requests are currently queued: - - - - -$strBg -
Host Req Time User
-

- -${h2("Command Queue Summary")} -

-The following command requests are currently queued: - - - - - -$strCmd -
Host Req Time User Command
-EOF + Header($Lang->{BackupPC__Queue_Summary}); + + print ( eval ( "qq{$Lang->{Backup_Queue_Summary}}") ); + Trailer(); } @@ -440,7 +335,7 @@ sub Action_View my($file, $comment); my $ext = $num ne "" ? ".$num" : ""; - ErrorExit("Invalid number $num") if ( $num ne "" && $num !~ /^\d+$/ ); + ErrorExit(eval("qq{$Lang->{Invalid_number__num}}")) if ( $num ne "" && $num !~ /^\d+$/ ); if ( $type eq "XferLOG" ) { $file = "$TopDir/pc/$host/SmbLOG$ext"; $file = "$TopDir/pc/$host/XferLOG$ext" if ( !-f $file && !-f "$file.z"); @@ -465,12 +360,12 @@ sub Action_View } elsif ( $type eq "docs" ) { $file = "$BinDir/../doc/BackupPC.html"; if ( open(LOG, $file) ) { - Header("BackupPC: Documentation"); + Header($Lang->{BackupPC__Documentation}); print while ( ); close(LOG); Trailer(); } else { - ErrorExit("Unable to open $file: configuration problem?"); + ErrorExit(eval("qq{$Lang->{Unable_to_open__file__configuration_problem}}")); } return; } elsif ( $type eq "config" ) { @@ -484,22 +379,19 @@ sub Action_View $linkHosts = 1; } if ( !$Privileged ) { - ErrorExit("Only privileged users can view log or config files." ); + ErrorExit($Lang->{Only_privileged_users_can_view_log_or_config_files}); } if ( !-f $file && -f "$file.z" ) { $file .= ".z"; $compress = 1; } - Header("BackupPC: Log File $file"); - print < -EOF + Header(eval("qq{$Lang->{Backup_PC__Log_File__file}}") ); + print( eval ("qq{$Lang->{Log_File__file__comment}}")); if ( defined($fh = BackupPC::FileZIO->open($file, 0, $compress)) ) { my $mtimeStr = $bpc->timeStamp((stat($file))[9], 1); - print <$file, modified $mtimeStr $comment -EOF + + print ( eval ("qq{$Lang->{Contents_of_log_file}}")); + print "

";
         if ( $type eq "XferErr" || $type eq "XferErrbad"
 				|| $type eq "RestoreErr" ) {
@@ -507,7 +399,7 @@ EOF
             while ( 1 ) {
                 $_ = $fh->readLine();
                 if ( $_ eq "" ) {
-		    print("[ skipped $skipped lines ]\n") if ( $skipped );
+		    print(eval ("qq{$Lang->{skipped__skipped_lines}}"));
 		    last;
 		}
                 if ( /smb: \\>/
@@ -529,7 +421,7 @@ EOF
 		    $skipped++;
 		    next;
 		}
-		print("[ skipped $skipped lines ]\n") if ( $skipped );
+		print(eval("qq{$Lang->{skipped__skipped_lines}}")) if ( $skipped );
 		$skipped = 0;
                 print ${EscapeHTML($_)};
             }
@@ -561,7 +453,7 @@ EOF
         }
         $fh->close();
     } else {
-        printf("
\nCan't open log file $file\n");
+	printf( eval("qq{$Lang->{_pre___Can_t_open_log_file__file}}"));
     }
     print <
@@ -574,7 +466,7 @@ sub Action_LOGlist
     my $Privileged = CheckPermission($In{host});
 
     if ( !$Privileged ) {
-        ErrorExit("Only privileged users can view log files.");
+        ErrorExit($Lang->{Only_privileged_users_can_view_log_files});
     }
     my $host = $In{host};
     my($url0, $hdr, $root, $str);
@@ -604,18 +496,8 @@ sub Action_LOGlist
      $mtimeStr 
 EOF
     }
-    Header("BackupPC: Log File History");
-    print <
-
-
-    
-    
-$str
-
 File  Size  Modification time 

-EOF
+    Header($Lang->{BackupPC__Log_File_History});
+    print (eval("qq{$Lang->{Log_File_History__hdr}}"));
     Trailer();
 }
 
@@ -624,7 +506,7 @@ sub Action_EmailSummary
     my $Privileged = CheckPermission();
 
     if ( !$Privileged ) {
-        ErrorExit("Only privileged users can view email summaries." );
+        ErrorExit($Lang->{Only_privileged_users_can_view_email_summaries});
     }
     GetStatusInfo("hosts");
     ReadUserEmailInfo();
@@ -642,18 +524,8 @@ EOF
     foreach my $t ( sort({$b <=> $a} keys(%EmailStr)) ) {
         $str .= $EmailStr{$t};
     }
-    Header("BackupPC: Email Summary");
-    print <
-
-
-    
-    
-    
-$str
-
 Recipient  Host  Time  Subject 

-EOF
+    Header($Lang->{Email_Summary});
+    print (eval("qq{$Lang->{Recent_Email_Summary}}"));
     Trailer();
 }
 
@@ -665,14 +537,13 @@ sub Action_Browse
     my $checkBoxCnt = 0;      # checkbox counter
 
     if ( !$Privileged ) {
-        ErrorExit("Only privileged users can browse backup files"
-                . " for host ${EscapeHTML($In{host})}." );
+        ErrorExit(eval("qq{$Lang->{Only_privileged_users_can_browse_backup_files}}"));
     }
     my $host = $In{host};
     my $num  = $In{num};
     my $dir  = $In{dir};
     if ( $host eq "" ) {
-        ErrorExit("Empty host name.");
+        ErrorExit($Lang->{Empty_host_name});
     }
     #
     # Find the requested backup and the previous filled backup
@@ -700,8 +571,7 @@ sub Action_Browse
     $mangle = $Backups[$i]{mangle};
     if ( $dir eq "" || $dir eq "." || $dir eq ".." ) {
         if ( !opendir(DIR, "$TopDir/pc/$host/$num") ) {
-            ErrorExit("Can't browse bad directory name"
-	            . " ${EscapeHTML(\"$TopDir/pc/$host/$num\")}");
+            ErrorExit(eval("qq{$Lang->{Can_t_browse_bad_directory_name}}"));
         }
         #
         # Read this directory and find the first directory
@@ -715,8 +585,7 @@ sub Action_Browse
 	}
         closedir(DIR);
 	if ( $dir eq "" || $dir eq "." || $dir eq ".." ) {
-            ErrorExit("Directory ${EscapeHTML(\"$TopDir/pc/$host/$num\")}"
-		    . " is empty");
+            ErrorExit(eval("qq{$Lang->{Directory___EscapeHTML}}"));
 	}
     }
     my $relDir   = $dir;
@@ -750,8 +619,7 @@ sub Action_Browse
         my($fLast, $fum, $fLastum, @DirStr);
 
         if ( $fullDir =~ m{(^|/)\.\.(/|$)} || !opendir(DIR, $fullDir) ) {
-            ErrorExit("Can't browse bad directory name"
-	            . " ${EscapeHTML($fullDir)}");
+            ErrorExit(eval("qq{$Lang->{Can_t_browse_bad_directory_name2}}"));
         }
         #
         # Read this directory and optionally the corresponding filled directory
@@ -898,12 +766,9 @@ EOF
     $dirDisplay =~ s{//}{/}g;
     my $filledBackup;
     if ( defined($numF) ) {
-        $filledBackup = < This display is merged with backup #$numF, the most recent prior
-     filled (full) dump.
-EOF
+        $filledBackup = eval("qq{$Lang->{This_display_is_merged_with_backup}}");
     }
-    Header("BackupPC: Browse backup $num for $host");
+    Header(eval("qq{$Lang->{Browse_backup__num_for__host}}"));
 
     foreach my $d ( @DirStrPrev ) {
 	$dirStr .= "{tdArgs}>$d->{link}\n";
@@ -912,104 +777,20 @@ EOF
     ### hide checkall button if there are no files
     my ($topCheckAll, $checkAll, $fileHeader);
     if ( $fileStr ) {
-    	$fileHeader = < Name
-                 Type
-                 Mode
-                 Size
-                 Mod time
-            
-EOF
-	$checkAll = <
- Select all
-
-
-
-EOF
+    	$fileHeader = eval("qq{$Lang->{fileHeader}}");
+
+	$checkAll = $Lang->{checkAll};
+
     	# and put a checkall box on top if there are at least 20 files
 	if ( $checkBoxCnt >= 20 ) {
 	    $topCheckAll = $checkAll;
 	    $topCheckAll =~ s{allFiles}{allFilestop}g;
 	}
     } else {
-	$fileStr = <The directory ${EscapeHTML($dirDisplay)} is empty
-
-EOF
+	$fileStr = eval("qq{$Lang->{The_directory_is_empty}}");
     }
  
-    print <
-
-
-
-
    
-
  •  You are browsing backup #$num, which started around $backupTime
-        ($backupAge days ago),
-$filledBackup
-
  •  Click on a directory below to navigate into that directory,
-
  •  Click on a file below to restore that file.
-

-
-${h2("Contents of ${EscapeHTML($dirDisplay)}")}
-

-
-
-
-
-

-
-

-    
-    

-    $dirStr
-    

-		
-
-    
-    

-    

-        
-        $fileHeader
-        $topCheckAll
-        $fileStr
-        $checkAll
-        

-    

-

-
-

-

-EOF
+    print (eval("qq{$Lang->{Backup_browse_for__host}}"));
     Trailer();
 }
 
@@ -1018,8 +799,7 @@ sub Action_Restore
     my($str, $reply, $i);
     my $Privileged = CheckPermission($In{host});
     if ( !$Privileged ) {
-        ErrorExit("Only privileged users can restore backup files"
-                . " for host ${EscapeHTML($In{host})}." );
+        ErrorExit(eval("qq{$Lang->{Only_privileged_users_can_restore_backup_files}}"));
     }
     my $host = $In{host};
     my $num  = $In{num};
@@ -1032,7 +812,7 @@ sub Action_Restore
     ServerConnect();
 
     if ( !defined($Hosts->{$host}) ) {
-        ErrorExit("Bad host name ${EscapeHTML($host)}");
+        ErrorExit(eval("qq{$Lang->{Bad_host_name}}"));
     }
     for ( my $i = 0 ; $i < $In{fcbMax} ; $i++ ) {
         next if ( !defined($In{"fcb$i"}) );
@@ -1062,11 +842,10 @@ EOF
     $badFileCnt++ if ( $In{pathHdr} =~ m{(^|/)\.\.(/|$)} );
     $badFileCnt++ if ( $In{num} =~ m{(^|/)\.\.(/|$)} );
     if ( @fileList == 0 ) {
-        ErrorExit("You haven't selected any files; please go Back to"
-                . " select some files.");
+        ErrorExit($Lang->{You_haven_t_selected_any_files__please_go_Back_to});
     }
     if ( $badFileCnt ) {
-        ErrorExit("Nice try, but you can't put '..' in any of the file names");
+        ErrorExit($Lang->{Nice_try__but_you_can_t_put});
     }
     if ( @fileList == 1 ) {
 	$pathHdr =~ s/(.*)\/.*/$1/;
@@ -1083,122 +862,19 @@ EOF
         #
         # Tell the user what options they have
         #
-        Header("BackupPC: Restore Options for $host");
-        print <
-You have selected the following files/directories from
-share $share, backup number #$num:
-
    
-$fileListStr
-

-

-You have three choices for restoring these files/directories.
-Please select one of the following options.
-

-${h2("Option 1: Direct Restore")}
-

-You can start a restore that will restore these files directly onto
-$host.
-

-Warning: any existing files that match the ones you have
-selected will be overwritten!
-
-

-
-
-
-$hiddenStr
-
-
-
-    
-    
-
-    
-    
-
-    
-    
-
-    
-
Restore the files to host
Restore the files to share
Restore the files below dir
(relative to share)

-

-EOF
+        Header(eval("qq{$Lang->{Restore_Options_for__host}}"));
+	print(eval("qq{$Lang->{Restore_Options_for__host2}}"));
 
 	#
 	# Verify that Archive::Zip is available before showing the
 	# zip restore option
 	#
 	if ( eval { require Archive::Zip } ) {
-	    print <
-You can download a Zip archive containing all the files/directories you have
-selected.  You can then use a local application, such as WinZip,
-to view or extract any of the files.
-

-Warning: depending upon which files/directories you have selected,
-this archive might be very very large.  It might take many minutes to
-create and transfer the archive, and you will need enough local disk
-space to store it.
-

-

-
-
-
-$hiddenStr
-
- Make archive relative
-to ${EscapeHTML($pathHdr eq "" ? "/" : $pathHdr)}
-(otherwise archive will contain full paths).
-

-Compression (0=off, 1=fast,...,9=best)
-
-

-
-

-EOF
+	    print (eval("qq{$Lang->{Option_2__Download_Zip_archive}}"));
 	} else {
-	    print <
-You could download a zip archive, but Archive::Zip is not installed.
-Please ask your system adminstrator to install Archive::Zip from
-www.cpan.org.
-

-EOF
+	    print (eval("qq{$Lang->{Option_2__Download_Zip_archive2}}"));
 	}
-	print <
-You can download a Tar archive containing all the files/directories you
-have selected.  You can then use a local application, such as tar or
-WinZip to view or extract any of the files.
-

-Warning: depending upon which files/directories you have selected,
-this archive might be very very large.  It might take many minutes to
-create and transfer the archive, and you will need enough local disk
-space to store it.
-

-

-
-
-
-$hiddenStr
-
- Make archive relative
-to ${EscapeHTML($pathHdr eq "" ? "/" : $pathHdr)}
-(otherwise archive will contain full paths).
-

-
-

-EOF
+	print (eval("qq{$Lang->{Option_3__Download_Zip_archive}}"));
         Trailer();
     } elsif ( $In{type} == 1 ) {
         #
@@ -1207,8 +883,8 @@ EOF
         $SIG{CHLD} = 'IGNORE';
         my $pid = fork();
         if ( !defined($pid) ) {
-            $bpc->ServerMesg("log Can't fork for tar restore request by $User");
-            ErrorExit("Can't fork for tar restore");
+            $bpc->ServerMesg(eval("qq{$Lang->{log_Can_t_fork_for_tar_restore_request_by__User}}"));
+            ErrorExit($Lang->{Can_t_fork_for_tar_restore});
         }
         if ( $pid ) {
             #
@@ -1218,9 +894,7 @@ EOF
             if ( @fileListTrim > 10 ) {
                 @fileListTrim = (@fileListTrim[0..9], '...');
             }
-            $bpc->ServerMesg("log User $User downloaded tar archive for $host,"
-                           . " backup $num; files were: "
-			   . join(", ", @fileListTrim));
+            $bpc->ServerMesg(eval("qq{$Lang->{log_User__User_downloaded_tar_archive_for__host}}"));
             return;
         }
         #
@@ -1248,8 +922,8 @@ EOF
         $SIG{CHLD} = 'IGNORE';
         my $pid = fork();
         if ( !defined($pid) ) {
-            $bpc->ServerMesg("log Can't fork for zip restore request by $User");
-            ErrorExit("Can't fork for zip restore");
+            $bpc->ServerMesg(eval("qq{$Lang->{log_Can_t_fork_for_zip_restore_request_by__User}}"));
+            ErrorExit($Lang->{Can_t_fork_for_zip_restore});
         }
         if ( $pid ) {
             #
@@ -1259,9 +933,7 @@ EOF
             if ( @fileListTrim > 10 ) {
                 @fileListTrim = (@fileListTrim[0..9], '...');
             }
-            $bpc->ServerMesg("log User $User downloaded zip archive for $host,"
-                           . " backup $num; files were: "
-                           . join(", ", @fileListTrim));
+            $bpc->ServerMesg(eval("qq{$Lang->{log_User__User_downloaded_zip_archive_for__host}}"));
             return;
         }
         #
@@ -1289,11 +961,10 @@ EOF
         # Do restore directly onto host
         #
 	if ( !defined($Hosts->{$In{hostDest}}) ) {
-	    ErrorExit("Host ${EscapeHTML($In{hostDest})} doesn't exist");
+	    ErrorExit(eval("qq{$Lang->{Host__doesn_t_exist}}"));
 	}
 	if ( !CheckPermission($In{hostDest}) ) {
-	    ErrorExit("You don't have permission to restore onto host"
-		    . " ${EscapeHTML($In{hostDest})}");
+	    ErrorExit(eval("qq{$Lang->{You_don_t_have_permission_to_restore_onto_host}}"));
 	}
         $fileListStr = "";
         foreach my $f ( @fileList ) {
@@ -1305,40 +976,15 @@ EOF
 $host:/$strippedShare$f$In{hostDest}:/$strippedShareDest$targetFile
 EOF
         }
-        Header("BackupPC: Restore Confirm on $host");
-        print <
-You are about to start a restore directly to the machine $In{hostDest}.
-The following files will be restored to share $In{shareDest}, from
-backup number $num:
-

-
-
-$fileListStr
-
Original file/dirWill be restored to

-
-

-
-
-
-
-
-
-$hiddenStr
-Do you really want to do this?
-
-
-

-EOF
+        Header(eval("qq{$Lang->{Restore_Confirm_on__host}}"));
+	print(eval("qq{$Lang->{Are_you_sure}}"));
         Trailer();
     } elsif ( $In{type} == 4 ) {
 	if ( !defined($Hosts->{$In{hostDest}}) ) {
-	    ErrorExit("Host ${EscapeHTML($In{hostDest})} doesn't exist");
+	    ErrorExit(eval("qq{$Lang->{Host_doesn_t_exist}}"));
 	}
 	if ( !CheckPermission($In{hostDest}) ) {
-	    ErrorExit("You don't have permission to restore onto host"
-		    . " ${EscapeHTML($In{hostDest})}");
+	    ErrorExit(eval("qq{$Lang->{You_don_t_have_permission_to_restore_onto_host}}"));
 	}
 	my $hostDest = $1 if ( $In{hostDest} =~ /(.+)/ );
 	my $ipAddr = ConfirmIPAddress($hostDest);
@@ -1380,21 +1026,12 @@ EOF
             print(REQ $dump->Dump);
             close(REQ);
         } else {
-            ErrorExit("Can't open/create "
-                    . ${EscapeHTML("$TopDir/pc/$hostDest/$reqFileName")});
+            ErrorExit(eval("qq{$Lang->{Can_t_open_create}}"));
         }
-	$reply = $bpc->ServerMesg("restore $ipAddr"
-			. " $hostDest $User $reqFileName");
-	$str = "Restore requested to host $hostDest, backup #$num,"
-	     . " by $User from $ENV{REMOTE_ADDR}";
-        Header("BackupPC: Restore Requested on $hostDest");
-        print <
-Reply from server was: $reply
-

-Go back to $hostDest home page.
-EOF
+	$reply = $bpc->ServerMesg(eval("qq{$Lang->{restore__ipAddr}}"));
+	$str = eval("qq{$Lang->{Restore_requested_to_host__hostDest__backup___num}}");
+        Header(eval("qq{$Lang->{Restore_Requested_on__hostDest}}"));
+	print (eval("qq{$Lang->{Reply_from_server_was___reply}}"));
         Trailer();
     }
 }
@@ -1497,13 +1134,12 @@ sub restoreFile
     };
 
     if ( !$Privileged ) {
-        ErrorExit("Only privileged users can restore backup files"
-                . " for host ${EscapeHTML($host)}." );
+        ErrorExit(eval("qq{$Lang->{Only_privileged_users_can_restore_backup_files2}}"));
     }
     ServerConnect();
     my @Backups = $bpc->BackupInfoRead($host);
     if ( $host eq "" ) {
-        ErrorExit("Empty host name");
+        ErrorExit($Lang->{Empty_host_name});
     }
     $dir = "/" if ( $dir eq "" );
     for ( $i = 0 ; $i < @Backups ; $i++ ) {
@@ -1537,7 +1173,7 @@ sub restoreFile
 	}
     }
     if ( $fullPath =~ m{(^|/)\.\.(/|$)} || !-f $fullPath ) {
-        ErrorExit("Can't restore bad file ${EscapeHTML($fullPath)}");
+        ErrorExit(eval("qq{$Lang->{Can_t_restore_bad_file}}"));
     }
     my $dirUM = $mangle ? $bpc->fileNameUnmangle($dir) : $dir;
     my $attr = BackupPC::Attrib->new({compress => $compress});
@@ -1607,7 +1243,7 @@ sub Action_HostInfo
                 }
             }
             CheckPermission();
-            ErrorExit("Unknown host or user ${EscapeHTML($host)}")
+            ErrorExit(eval("qq{$Lang->{Unknown_host_or_user}}"))
                                 if ( !defined($Hosts->{$host}) );
         }
         $In{host} = $host;
@@ -1617,8 +1253,7 @@ sub Action_HostInfo
     %Conf = $bpc->Conf();
     my $Privileged = CheckPermission($host);
     if ( !$Privileged ) {
-        ErrorExit("Only privileged users can view information about"
-                . " host ${EscapeHTML($host)}." );
+        ErrorExit(eval("qq{$Lang->{Only_privileged_users_can_view_information_about}}"));
     }
     ReadUserEmailInfo();
 
@@ -1648,12 +1283,15 @@ sub Action_HostInfo
         }
         my $age = sprintf("%.1f", (time - $Backups[$i]{startTime}) / (24*3600));
         my $browseURL = "$MyURL?action=browse&host=$host&num=$Backups[$i]{num}";
-        my $filled = $Backups[$i]{noFill} ? "no" : "yes";
+        my $filled = $Backups[$i]{noFill} ? $Lang->{No} : $Lang->{Yes};
         $filled .= " ($Backups[$i]{fillFromNum}) "
                             if ( $Backups[$i]{fillFromNum} ne "" );
+	my $ltype;
+	if ($Backups[$i]{type} eq "full") { $ltype = $Lang->{full}; }
+	else { $ltype = $Lang->{incremental}; }
         $str .= < $Backups[$i]{num} 
-     $Backups[$i]{type} 
+     $ltype 
      $filled 
       $startTime 
       $duration 
@@ -1662,7 +1300,7 @@ sub Action_HostInfo
 EOF
         $sizeStr .= < $Backups[$i]{num} 
-     $Backups[$i]{type} 
+     $ltype 
       $Backups[$i]{nFiles} 
       $MB 
       $MBperSec 
@@ -1673,13 +1311,17 @@ EOF
 
 EOF
         $Backups[$i]{compress} ||= "off";
+	my $is_compress = $Lang->{off};
+	if ($Backups[$i]{compress} ne "off") {$is_compress = $Lang->{on}; }
+	if (! $ExistComp) { $ExistComp = " "; }
+	if (! $MBExistComp) { $MBExistComp = " "; }
         $compStr .= < $Backups[$i]{num} 
-     $Backups[$i]{type} 
-     $Backups[$i]{compress} 
+     $ltype 
+     $is_compress  
       $MBExist 
-      $MBExistComp 
-      $ExistComp 
+      $MBExistComp  
+      $ExistComp    
       $MBNew 
       $MBNewComp 
       $NewComp 
@@ -1687,7 +1329,7 @@ EOF
 EOF
         $errStr .= < $Backups[$i]{num} 
-     $Backups[$i]{type} 
+     $ltype 
      XferLOG,
                       Errors 
       $Backups[$i]{xferErrs} 
@@ -1707,9 +1349,11 @@ EOF
         my $duration  = sprintf("%.1f", $dur / 60);
         my $MB        = sprintf("%.1f", $Restores[$i]{size} / (1024*1024));
         my $MBperSec  = sprintf("%.2f", $Restores[$i]{size} / (1024*1024*$dur));
+	my $Restores_Result = $Lang->{failed};
+	if ($Restores[$i]{result} ne "failed") { $Restores_Result = $Lang->{success}; }
 	$restoreStr  .= <$Restores[$i]{num} 
-     $Restores[$i]{result} 
+     $Restores_Result 
      $startTime 
      $duration 
      $Restores[$i]{nFiles} 
@@ -1719,65 +1363,48 @@ EOF
 
 EOF
     }
-    $restoreStr   = <
-Click on the restore number for more details.
-
-
-    
-    
-    
-    
-    
-    
-    
-
-$restoreStr
-
 Restore#  Result  Start Date Dur/mins #files  MB  #tar errs  #xferErrs 

-

-EOF
-
+    if ( $restoreStr ne "" ) {
+	$restoreStr = eval("qq{$Lang->{Restore_Summary}}");
+    }
     if ( @Backups == 0 ) {
-        $warnStr = "
 This PC has never been backed up!! 
\n";
+        $warnStr = $Lang->{This_PC_has_never_been_backed_up};
     }
     if ( defined($Hosts->{$host}) ) {
         my $user = $Hosts->{$host}{user};
+	my @moreUsers = sort(keys(%{$Hosts->{$host}{moreUsers}}));
+	my $moreUserStr;
+	foreach my $u ( sort(keys(%{$Hosts->{$host}{moreUsers}})) ) {
+	    $moreUserStr .= ", " if ( $moreUserStr ne "" );
+	    $moreUserStr .= "${UserLink($u)}";
+	}
+	if ( $moreUserStr ne "" ) {
+	    $moreUserStr = " ($Lang->{and} $moreUserStr).\n";
+	} else {
+	    $moreUserStr = ".\n";
+	}
         if ( $user ne "" ) {
-            $statusStr .= <This PC is used by ${UserLink($user)}.
-EOF
+            $statusStr .= eval("qq{$Lang->{This_PC_is_used_by}$moreUserStr}");
         }
         if ( defined($UserEmailInfo{$user})
                 && $UserEmailInfo{$user}{lastHost} eq $host ) {
             my $mailTime = timeStamp2($UserEmailInfo{$user}{lastTime});
             my $subj     = $UserEmailInfo{$user}{lastSubj};
-            $statusStr  .= <Last email sent to ${UserLink($user)} was at $mailTime, subject "$subj".
-EOF
+            $statusStr  .= eval("qq{$Lang->{Last_email_sent_to__was_at___subject}}");
         }
     }
     if ( defined($Jobs{$host}) ) {
         my $startTime = timeStamp2($Jobs{$host}{startTime});
         (my $cmd = $Jobs{$host}{cmd}) =~ s/$BinDir\///g;
-        $statusStr .= <The command $cmd is currently running for $host, started $startTime.
-EOF
+        $statusStr .= eval("qq{$Lang->{The_command_cmd_is_currently_running_for_started}}");
     }
     if ( $StatusHost{BgQueueOn} ) {
-        $statusStr .= <Host $host is queued on the background queue (will be backed up soon).
-EOF
+        $statusStr .= eval("qq{$Lang->{Host_host_is_queued_on_the_background_queue_will_be_backed_up_soon}}");
     }
     if ( $StatusHost{UserQueueOn} ) {
-        $statusStr .= <Host $host is queued on the user queue (will be backed up soon).
-EOF
+        $statusStr .= eval("qq{$Lang->{Host_host_is_queued_on_the_user_queue__will_be_backed_up_soon}}");
     }
     if ( $StatusHost{CmdQueueOn} ) {
-        $statusStr .= <A command for $host is on the command queue (will run soon).
-EOF
+        $statusStr .= eval("qq{$Lang->{A_command_for_host_is_on_the_command_queue_will_run_soon}}");
     }
     my $startTime = timeStamp2($StatusHost{endTime} == 0 ?
                 $StatusHost{startTime} : $StatusHost{endTime});
@@ -1785,27 +1412,19 @@ EOF
     if ( $StatusHost{reason} ne "" ) {
         $reason = " ($StatusHost{reason})";
     }
-    $statusStr .= <Last status is state "$StatusHost{state}"$reason
-    as of $startTime.
-EOF
+    $statusStr .= eval("qq{$Lang->{Last_status_is_state_StatusHost_state_reason_as_of_startTime}}");
+
     if ( $StatusHost{error} ne "" ) {
-        $statusStr .= <Last error is "${EscapeHTML($StatusHost{error})}"
-EOF
+        $statusStr .= eval("qq{$Lang->{Last_error_is____EscapeHTML_StatusHost_error}}");
     }
     my $priorStr = "Pings";
     if ( $StatusHost{deadCnt} > 0 ) {
-        $statusStr .= <Pings to $host have failed $StatusHost{deadCnt} consecutive times.
-EOF
-        $priorStr = "Prior to that, pings";
+        $statusStr .= eval("qq{$Lang->{Pings_to_host_have_failed_StatusHost_deadCnt__consecutive_times}}");
+        $priorStr = $Lang->{Prior_to_that__pings};
     }
     if ( $StatusHost{aliveCnt} > 0 ) {
-        $statusStr .= <$priorStr to $host have succeeded $StatusHost{aliveCnt}
-        consecutive times.
-EOF
+        $statusStr .= eval("qq{$Lang->{priorStr_to_host_have_succeeded_StatusHostaliveCnt_consecutive_times}}");
+
         if ( $StatusHost{aliveCnt} >= $Conf{BlackoutGoodCnt}
 		&& $Conf{BlackoutGoodCnt} >= 0 && $Conf{BlackoutHourBegin} >= 0
 		&& $Conf{BlackoutHourEnd} >= 0 ) {
@@ -1817,133 +1436,31 @@ EOF
             my($t1) = sprintf("%d:%02d", $Conf{BlackoutHourEnd},
                             60 * ($Conf{BlackoutHourEnd}
                                      - int($Conf{BlackoutHourEnd})));
-            $statusStr .= <Because $host has been on the network at least $Conf{BlackoutGoodCnt}
-consecutive times, it will not be backed up from $t0 to $t1 on $days.
-EOF
+            $statusStr .= eval("qq{$Lang->{Because__host_has_been_on_the_network_at_least__Conf_BlackoutGoodCnt_consecutive_times___}}");
         }
     }
     if ( $StatusHost{backoffTime} > time ) {
         my $hours = sprintf("%.1f", ($StatusHost{backoffTime} - time) / 3600);
-        $statusStr .= <Backups are deferred for $hours hours
-    (change this
-    number).
-EOF
+        $statusStr .= eval("qq{$Lang->{Backups_are_deferred_for_hours_hours_change_this_number}}");
+
     }
     if ( @Backups ) {
         # only allow incremental if there are already some backups
         $startIncrStr = <
+
 EOF
     }
 
-    Header("BackupPC: Host $host Backup Summary");
-    print <
-$warnStr
-
    
-$statusStr
-

+    $startIncrStr = eval ("qq{$startIncrStr}");
 
-${h2("User Actions")}
-

-

-
-$startIncrStr
-
-
-

-
-${h2("Backup Summary")}
-

-Click on the backup number to browse and restore backup files.
-
-
-    
-    
-    
-    
-    
-    
-
-$str
-
 Backup#  Type  Filled  Start Date  Duration/mins  Age/days  Server Backup Path 

-

-
-$restoreStr
-
-${h2("Xfer Error Summary")}
-

-
-
-    
-    
-    
-    
-    
-    
-
-$errStr
-
 Backup#  Type  View  #Xfer errs  #bad files  #bad share  #tar errs 

-

-
-${h2("File Size/Count Reuse Summary")}
-

-Existing files are those already in the pool; new files are those added
-to the pool.
-Empty files and SMB errors aren't counted in the reuse and new counts.
-
-
-    
-    
-    
-
-
-    
-    
-    
-    
-    
-    
-    
-    
-    
-
-$sizeStr
-
 Totals  Existing Files  New Files 
 Backup#  Type  #Files  Size/MB  MB/sec  #Files  Size/MB  #Files  Size/MB 

-

-
-${h2("Compression Summary")}
-

-Compression performance for files already in the pool and newly
-compressed files.
-
-
-    
-    
-
-
-    
-    
-    
-    
-    
-    
-    
-    
-
-$compStr
-
 Existing Files  New Files 
 Backup#  Type  Comp Level  Size/MB  Comp/MB  Comp  Size/MB  Comp/MB  Comp 

-

-EOF
+    Header(eval("qq{$Lang->{Host__host_Backup_Summary}}"));
+    print(eval("qq{$Lang->{Host__host_Backup_Summary2}}"));
     Trailer();
 }
 
 sub Action_GeneralInfo
 {
-    GetStatusInfo("info jobs hosts queueLen");
+    GetStatusInfo($Lang->{info_jobs_hosts_queueLen});
     my $Privileged = CheckPermission();
 
     my($jobStr, $statusStr, $tarPidHdr, $ rivLinks);
@@ -2023,59 +1540,15 @@ EOF
     } elsif ( $Info{cpoolFileCnt} > 0 ) {
         $poolInfo = $cpoolInfo;
     }
-    Header("BackupPC: Server Status");
-    print <
+    Header($Lang->{H_BackupPC_Server_Status});
+	#Header("H_BackupPC_Server_Status");
+    print (eval ("qq{$Lang->{BackupPC_Server_Status}}"));
 
-${h2("General Server Information")}
+    #Header($Lang->{BackupPC_Server_Status});
 
-
    
-
  •  The server's PID is $Info{pid} on host $Conf{ServerHost},
-     version $Info{Version}, started at $serverStartTime.
-
  •  This status was generated at $now.
-
  •  PCs will be next queued at $nextWakeupTime.
-
  •  Other info:
-    
      
-        
    • $numBgQueue pending backup requests from last scheduled wakeup,
-        
    • $numUserQueue pending user backup requests,
-        
    • $numCmdQueue pending command requests,
-        $poolInfo
-        
    • Pool file system was recently at $Info{DUlastValue}%
-            ($DUlastTime), today's max is $Info{DUDailyMax}% ($DUmaxTime)
-            and yesterday's max was $Info{DUDailyMaxPrev}%.
-    
    
-

-
-${h2("Currently Running Jobs")}
-

-
-
-    
-    
-    
-    
-    
-    
-    $tarPidHdr
-$jobStr
-
 Host  Type  User  Start Time  Command  PID  Xfer PID 

-

-
-${h2("Failures that need attention")}
-

-
-
-    
-    
-    
-    
-    
-    
-$statusStr
-
 Host  Type  User  Last Try  Details  Error Time  Last error (other than no ping) 

-EOF
+    #my $trans_text = $Lang->{BackupPC_Server_Status};
+    #print eval ("qq{$trans_text}");
     Trailer();
 }
 
@@ -2087,7 +1560,7 @@ sub Action_RestoreInfo
     my $i;
 
     if ( !$Privileged ) {
-        ErrorExit("Only privileged users can view restore information." );
+        ErrorExit($Lang->{Only_privileged_users_can_view_restore_information});
     }
     #
     # Find the requested restore
@@ -2097,8 +1570,7 @@ sub Action_RestoreInfo
         last if ( $Restores[$i]{num} == $num );
     }
     if ( $i >= @Restores ) {
-        ErrorExit("Restore number $num for host ${EscapeHTML($host)} does"
-	        . " not exist.");
+        ErrorExit(eval("qq{$Lang->{Restore_number__num_for_host__does_not_exist}}"));
     }
 
     %RestoreReq = ();
@@ -2125,41 +1597,8 @@ sub Action_RestoreInfo
 EOF
     }
 
-    Header("BackupPC: Restore #$num details for $host");
-    print <
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
 Number  $Restores[$i]{num} 
 Requested by  $RestoreReq{user} 
 Request time  $reqTime 
 Result  $Restores[$i]{result} 
 Error Message  $Restores[$i]{errorMsg} 
 Source host  $RestoreReq{hostSrc} 
 Source backup num  $RestoreReq{num} 
 Source share  $RestoreReq{shareSrc} 
 Destination host  $RestoreReq{hostDest} 
 Destination share  $RestoreReq{shareDest} 
 Start time  $startTime 
 Duration  $duration min 
 Number of files  $Restores[$i]{nFiles} 
 Total size  ${MB} MB 
 Transfer rate  $MBperSec MB/sec 
 TarCreate errors  $Restores[$i]{tarCreateErrs} 
 Xfer errors  $Restores[$i]{xferErrs} 
 Xfer log file 
-View,
-Errors
-

-

-${h1("File/Directory list")}
-

-
-
-$fileListStr
-
Original file/dirRestored to

-EOF
+    Header(eval("qq{$Lang->{Restore___num_details_for__host}}"));
+    print(eval("qq{$Lang->{Restore___num_details_for__host2 }}"));
     Trailer();
 }
     
@@ -2217,7 +1656,7 @@ sub EscapeHTML
     $s =~ s/\"/"/g;
     $s =~ s/>/>/g;
     $s =~ s/ServerMesg("log User $User (host=$In{host}) got CGI error: $head")
                             if ( defined($bpc) );
-    Header("BackupPC: Error");
-    print <{Error}) ) {
+	Header("BackupPC: Error");
+	print <$mesg

 EOF
-    Trailer();
+	Trailer();
+    } else {
+	Header(eval("qq{$Lang->{Error}}"));
+	print (eval("qq{$Lang->{Error____head}}"));
+	Trailer();
+    }
     exit(1);
 }
 
@@ -2257,14 +1702,7 @@ sub ServerConnect
     return if ( $bpc->ServerOK() );
     $bpc->ServerDisconnect();
     if ( my $err = $bpc->ServerConnect($Conf{ServerHost}, $Conf{ServerPort}) ) {
-        ErrorExit(
-            "Unable to connect to BackupPC server",
-            "This CGI script ($MyURL) is unable to connect to the BackupPC"
-          . " server on $Conf{ServerHost} port $Conf{ServerPort}.  The error"
-          . " was: $err.",
-            "Perhaps the BackupPC server is not running or there is a "
-          . " configuration error.  Please report this to your Sys Admin."
-        );
+        ErrorExit(eval("qq{$Lang->{Unable_to_connect_to_BackupPC_server}}"));
     }
 }
 
@@ -2314,9 +1752,28 @@ sub CheckPermission
     }
     $PrivAdmin = $Privileged;
     $Privileged ||= $User eq $Hosts->{$host}{user};
+    $Privileged ||= defined($Hosts->{$host}{operators}{$User});
+
     return $Privileged;
 }
 
+#
+# Returns the list of hosts that should appear in the navigation bar
+# for this user.  If $Conf{CgiNavBarAdminAllHosts} is set, the admin
+# gets all the hosts.  Otherwise, regular users get hosts for which
+# they are the user or are listed in the moreUsers column in the
+# hosts file.
+#
+sub GetUserHosts
+{
+    if ( $Conf{CgiNavBarAdminAllHosts} && CheckPermission() ) {
+       return sort keys %$Hosts;
+    }
+
+    return sort grep { $Hosts->{$_}{user} eq $User ||
+                       defined($Hosts->{$_}{moreUsers}{$User}) } keys(%$Hosts);
+}
+
 #
 # Given a host name tries to find the IP address.  For non-dhcp hosts
 # we just return the host name.  For dhcp hosts we check the address
@@ -2338,20 +1795,13 @@ sub ConfirmIPAddress
 	    GetStatusInfo("host($host)");
 	    if ( defined($StatusHost{dhcpHostIP})
 			&& $StatusHost{dhcpHostIP} ne $ipAddr ) {
-		$tryIP = " and $StatusHost{dhcpHostIP}";
+		$tryIP = eval("qq{$Lang->{tryIP}}");
 		($netBiosHost, $netBiosUser)
 			= $bpc->NetBiosInfoGet($StatusHost{dhcpHostIP});
 	    }
 	    if ( $netBiosHost ne $host ) {
-		ErrorExit("Can't find IP address for ${EscapeHTML($host)}",
-		          <
-Until I see $host at a particular DHCP address, you can only
-start this request from the client machine itself.
-EOF
+		ErrorExit(eval("qq{$Lang->{Can_t_find_IP_address_for}}"),
+		          eval("qq{$Lang->{host_is_a_DHCP_host}}"));
 	    }
 	    $ipAddr = $StatusHost{dhcpHostIP};
 	}
@@ -2366,14 +1816,8 @@ sub genPoolInfo
     my $poolRmSize = sprintf("%.2f", $info->{"${name}KbRm"} / (1000 * 1024));
     my $poolTime   = timeStamp2($info->{"${name}Time"});
     $info->{"${name}FileCntRm"} = $info->{"${name}FileCntRm"} + 0;
-    return <Pool is ${poolSize}GB comprising $info->{"${name}FileCnt"} files
-            and $info->{"${name}DirCnt"} directories (as of $poolTime),
-        
  • Pool hashing gives $info->{"${name}FileCntRep"} repeated
-            files with longest chain $info->{"${name}FileRepMax"},
-        
  • Nightly cleanup removed $info->{"${name}FileCntRm"} files of
-            size ${poolRmSize}GB (around $poolTime),
-EOF
+    return eval("qq{$Lang->{Pool_Stat}}");
+
 }
 
 ###########################################################################
@@ -2384,16 +1828,16 @@ sub Header
 {
     my($title) = @_;
     my @adminLinks = (
-        { link => "",                          name => "Status",
+        { link => "",                          name => $Lang->{Status},
                                                priv => 1},
-        { link => "?action=summary",           name => "PC Summary" },
-        { link => "?action=view&type=LOG",     name => "LOG file" },
-        { link => "?action=LOGlist",           name => "Old LOGs" },
-        { link => "?action=emailSummary",      name => "Email summary" },
-        { link => "?action=view&type=config",  name => "Config file" },
-        { link => "?action=view&type=hosts",   name => "Hosts file" },
-        { link => "?action=queue",             name => "Current queues" },
-        { link => "?action=view&type=docs",    name => "Documentation",
+        { link => "?action=summary",           name => $Lang->{PC_Summary} },
+        { link => "?action=view&type=LOG",     name => $Lang->{LOG_file} },
+        { link => "?action=LOGlist",           name => $Lang->{Old_LOGs} },
+        { link => "?action=emailSummary",      name => $Lang->{Email_summary} },
+        { link => "?action=view&type=config",  name => $Lang->{Config_file} },
+        { link => "?action=view&type=hosts",   name => $Lang->{Hosts_file} },
+        { link => "?action=queue",             name => $Lang->{Current_queues} },
+        { link => "?action=view&type=docs",    name => $Lang->{Documentation},
                                                priv => 1},
         { link => "http://backuppc.sourceforge.net", name => "SourceForge",
                                                      priv => 1},
@@ -2412,44 +1856,43 @@ EOF
     print " \n";
     if ( defined($In{host}) && defined($Hosts->{$In{host}}) ) {
         my $host = $In{host};
-        NavSectionTitle("Host $In{host}");
+        NavSectionTitle( eval("qq{$Lang->{Host_Inhost}}") );
         NavSectionStart();
-        NavLink("?host=$host", "Home");
-        NavLink("?action=view&type=LOG&host=$host", "LOG file");
-        NavLink("?action=LOGlist&host=$host", "Old LOGs");
+        NavLink("?host=$host", $Lang->{Home});
+        NavLink("?action=view&type=LOG&host=$host", $Lang->{LOG_file});
+        NavLink("?action=LOGlist&host=$host", $Lang->{Old_LOGs});
         if ( -f "$TopDir/pc/$host/SmbLOG.bad"
                     || -f "$TopDir/pc/$host/SmbLOG.bad.z"
                     || -f "$TopDir/pc/$host/XferLOG.bad"
                     || -f "$TopDir/pc/$host/XferLOG.bad.z" ) {
             NavLink("?action=view&type=XferLOGbad&host=$host",
-                                "Last bad XferLOG");
+                                $Lang->{Last_bad_XferLOG});
             NavLink("?action=view&type=XferErrbad&host=$host",
-                                "Last bad XferLOG (errors only)");
+                                $Lang->{Last_bad_XferLOG_errors_only});
         }
         if ( -f "$TopDir/pc/$host/config.pl" ) {
-            NavLink("?action=view&type=config&host=$host", "Config file");
+            NavLink("?action=view&type=config&host=$host", $Lang->{Config_file});
         }
         NavSectionEnd();
     }
-    NavSectionTitle("Hosts");
-    if ( %$Hosts > 0 ) {
-        NavSectionStart();
-        foreach my $host ( sort(keys(%$Hosts)) ) {
-            next if ( $Hosts->{$host}{user} ne $User );
+    NavSectionTitle($Lang->{Hosts});
+    if ( defined($Hosts) && %$Hosts > 0 ) {
+        NavSectionStart(0);
+        foreach my $host ( GetUserHosts() ) {
             NavLink("?host=$host", $host);
         }
         NavSectionEnd();
     }
     print <
-    Host or User name:
+    $Lang->{Host_or_User_name}
     
    
     
-    
+    
     
    
 
 EOF
-    NavSectionTitle("Server");
+    NavSectionTitle($Lang->{NavSectionTitle_});
     NavSectionStart();
     foreach my $l ( @adminLinks ) {
         if ( $PrivAdmin || $l->{priv} ) {
@@ -2473,31 +1916,6 @@ sub Trailer
 EOF
 }
 
-sub h1
-{
-    my($str) = @_;
-    return \<
-
- $str
-
-
-EOF
-}
-
-sub h2
-{
-    my($str) = @_;
-    return \<
-
- $str
-
-
-EOF
-}
 
 sub NavSectionTitle
 {
@@ -2513,8 +1931,11 @@ EOF
 
 sub NavSectionStart
 {
+    my($padding) = @_;
+
+    $padding = 2 if ( !defined($padding) );
     print <
+
 EOF
 }
 
@@ -2538,3 +1959,29 @@ EOF
 EOF
     }
 }
+
+sub h1
+{
+    my($str) = @_;
+    return \<
+
+
+
     $str
+
    
+EOF
+}
+
+sub h2
+{
+    my($str) = @_;
+    return \<
+
+ $str
+
+
+EOF
+}
diff --git a/configure.pl b/configure.pl
index c78e7a3..d4ec871 100755
--- a/configure.pl
+++ b/configure.pl
@@ -33,7 +33,7 @@
 #
 #========================================================================
 #
-# Version 1.5.0, released 2 Aug 2002.
+# Version __VERSION__, released __RELEASEDATE__.
 #
 # See http://backuppc.sourceforge.net.
 #
@@ -409,7 +409,9 @@ unlink("$Conf{InstallDir}/bin/BackupPC_queueAll");
 printf("Installing library in $Conf{InstallDir}/lib\n");
 foreach my $lib ( qw(BackupPC/Lib.pm BackupPC/FileZIO.pm BackupPC/Attrib.pm
         BackupPC/PoolWrite.pm BackupPC/Xfer/Tar.pm BackupPC/Xfer/Smb.pm
-	BackupPC/Zip/FileMember.pm) ) {
+	BackupPC/Zip/FileMember.pm
+	BackupPC/Lang/en.pm BackupPC/Lang/fr.pm
+    ) ) {
     InstallFile("lib/$lib", "$Conf{InstallDir}/lib/$lib", 0444);
 }
 
diff --git a/doc-src/BackupPC.pod b/doc-src/BackupPC.pod
index 248d761..8958782 100644
--- a/doc-src/BackupPC.pod
+++ b/doc-src/BackupPC.pod
@@ -1,7 +1,7 @@
 =head1 BackupPC Introduction
 
-This documentation describes BackupPC version 1.5.0,
-released on 2 Aug 2002.
+This documentation describes BackupPC version __VERSION__,
+released on __RELEASEDATE__.
 
 =head2 Overview
 
@@ -417,10 +417,10 @@ To build and install these packages you should run these commands:
     make install
 
 Now let's move onto BackupPC itself.  After fetching
-BackupPC-1.5.0.tar.gz, run these commands as root:
+BackupPC-__VERSION__.tar.gz, run these commands as root:
 
-    tar zxf BackupPC-1.5.0.tar.gz
-    cd BackupPC-1.5.0
+    tar zxf BackupPC-__VERSION__.tar.gz
+    cd BackupPC-__VERSION__
     perl configure.pl
 
 You will be prompted for the full paths of various executables, and
@@ -960,6 +960,7 @@ to Apache's httpd.conf file:
 
     
 	PerlModule Apache::Registry
+	PerlTaintCheck On
 	   # <--- change path as needed
 	   SetHandler perl-script
 	   PerlHandler Apache::Registry
@@ -2469,851 +2470,7 @@ settings for the CGI interface.
 All configuration settings in the second through fifth groups can
 be overridden by the per-PC config.pl file.
 
-=head2 General server configuration
-
-=over 4
-
-=item $Conf{ServerHost} = '';
-
-Host name on which the BackupPC server is running.
-
-=item $Conf{ServerPort} = -1;
-
-TCP port number on which the BackupPC server listens for and accepts
-connections.  Normally this should be disabled (set to -1).  The TCP
-port is only needed if apache runs on a different machine from BackupPC.
-In that case, set this to any spare port number over 1024 (eg: 2359).
-If you enable the TCP port, make sure you set $Conf{ServerMesgSecret}
-too!
-
-=item $Conf{ServerMesgSecret} = '';
-
-Shared secret to make the TCP port secure.  Set this to a hard to guess
-string if you enable the TCP port (ie: $Conf{ServerPort} > 0).
-
-To avoid possible attacks via the TCP socket interface, every client
-message is protected by an MD5 digest. The MD5 digest includes four
-items:
-  - a seed that is sent to the client when the connection opens
-  - a sequence number that increments for each message
-  - a shared secret that is stored in $Conf{ServerMesgSecret}
-  - the message itself.
-
-The message is sent in plain text preceded by the MD5 digest.  A
-snooper can see the plain-text seed sent by BackupPC and plain-text
-message from the client, but cannot construct a valid MD5 digest since
-the secret $Conf{ServerMesgSecret} is unknown.  A replay attack is
-not possible since the seed changes on a per-connection and
-per-message basis.
-
-=item $Conf{MyPath} = '/bin';
-
-PATH setting for BackupPC.  An explicit value is necessary
-for taint mode.  Value shouldn't matter too much since
-all execs use explicit paths.  However, taint mode in perl
-will complain if this directory is world writable.
-
-=item $Conf{UmaskMode} = 027;
-
-Permission mask for directories and files created by BackupPC.
-Default value prevents any access from group other, and prevents
-group write.
-
-=item $Conf{WakeupSchedule} = [1..23];
-
-Times at which we wake up, check all the PCs, and schedule necessary
-backups.  Times are measured in hours since midnight.  Can be
-fractional if necessary (eg: 4.25 means 4:15am).
-
-If the hosts you are backing up are always connected to the network
-you might have only one or two wakeups each night.  This will keep
-the backup activity after hours.  On the other hand, if you are backing
-up laptops that are only intermittently connected to the network you
-will want to have frequent wakeups (eg: hourly) to maximized the chance
-that each laptop is backed up.
-
-Examples:
-
-    $Conf{WakeupSchedule} = [22.5];         # once per day at 10:30 pm.
-    $Conf{WakeupSchedule} = [1..23];        # every hour except midnight
-    $Conf{WakeupSchedule} = [2,4,6,8,10,12,14,16,18,20,22];  # every 2 hours
-
-The default value is every hour except midnight.
-
-=item $Conf{MaxBackups} = 4;
-
-Maximum number of simultaneous backups to run.  If there
-are no user backup requests then this is the maximum number
-of simultaneous backups.
-
-=item $Conf{MaxUserBackups} = 4;
-
-Additional number of simultaneous backups that users can run.
-As many as $Conf{MaxBackups} + $Conf{MaxUserBackups} requests can
-run at the same time.
-
-=item $Conf{MaxPendingCmds} = 10;
-
-Maximum number of pending link commands. New backups will only be
-started if there are no more than $Conf{MaxPendingCmds} plus
-$Conf{MaxBackups} number of pending link commands, plus running jobs.
-This limit is to make sure BackupPC doesn't fall too far behind in
-running BackupPC_link commands.
-
-=item $Conf{MaxOldLogFiles} = 14;
-
-Maximum number of log files we keep around in log directory.
-These files are aged nightly.  A setting of 14 means the log
-directory will contain about 2 weeks of old log files, in
-particular at most the files LOG, LOG.0, LOG.1, ... LOG.13
-(except today's LOG, these files will have a .z extension if
-compression is on).
-
-If you decrease this number after BackupPC has been running for a
-while you will have to manually remove the older log files.
-
-=item $Conf{DfPath} = '/bin/df';
-
-Full path to the df command.  Security caution: normal users
-should not allowed to write to this file or directory.
-
-=item $Conf{DfMaxUsagePct} = 95;
-
-Maximum threshold for disk utilization on the __TOPDIR__ filesystem.
-If the output from $Conf{DfPath} reports a percentage larger than
-this number then no new regularly scheduled backups will be run.
-However, user requested backups (which are usually incremental and
-tend to be small) are still performed, independent of disk usage.
-Also, currently running backups will not be terminated when the disk
-usage exceeds this number.
-
-=item $Conf{TrashCleanSleepSec} = 300;
-
-How long BackupPC_trashClean sleeps in seconds between each check
-of the trash directory.  Once every 5 minutes should be reasonable.
-
-=item $Conf{DHCPAddressRanges} = [];
-
-List of DHCP address ranges we search looking for PCs to backup.
-This is an array of hashes for each class C address range.
-
-Examples:
-
-   # to specify 192.10.10.20 to 192.10.10.250 as the DHCP address pool
-   $Conf{DHCPAddressRanges} = [
-       {
-           ipAddrBase => '192.10.10',
-           first => 20,
-           last  => 250,
-       },
-   ];
-   # to specify two pools (192.10.10.20-250 and 192.10.11.10-50)
-   $Conf{DHCPAddressRanges} = [
-       {
-           ipAddrBase => '192.10.10',
-           first => 20,
-           last  => 250,
-       },
-       {
-           ipAddrBase => '192.10.11',
-           first => 10,
-           last  => 50,
-       },
-   ];
-
-=item $Conf{BackupPCUser} = '';
-
-=item $Conf{CgiDir} = '';
-
-=item $Conf{InstallDir} = '';
-
-These configuration settings aren't used by BackupPC, but simply
-remember a few settings used by configure.pl during installation.
-These are used by configure.pl when upgrading to new versions of
-BackupPC.
-
-=item $Conf{BackupPCUserVerify} = 1;
-
-Whether BackupPC and the CGI script BackupPC_Admin verify that they
-are really running as user $Conf{BackupPCUser}.  If this flag is set
-and the effective user id (euid) differs from $Conf{BackupPCUser}
-then both scripts exit with an error.  This catches cases where
-BackupPC might be accidently started as root or the wrong user,
-or if the CGI script is not installed correctly.
-
-=back
-
-=head2 What to backup and when to do it
-
-=over 4
-
-=item $Conf{SmbShareName} = 'C$';
-
-Name of the host share that is backed up when using SMB.  This can be a
-string or an array of strings if there are multiple shares per host.
-Examples:
-
-
-  $Conf{SmbShareName} = 'c';          # backup 'c' share
-  $Conf{SmbShareName} = ['c', 'd'];   # backup 'c' and 'd' shares
-
-This setting only matters if $Conf{XferMethod} = 'smb'.
-
-=item $Conf{SmbShareUserName} = '';
-
-Smbclient share user name.  This is passed to smbclient's -U argument.
-
-This setting only matters if $Conf{XferMethod} = 'smb'.
-
-=item $Conf{SmbSharePasswd} = '';
-
-Smbclient share password.  This is passed to smbclient via the PASSWD
-environment variable.  There are several ways you can tell BackupPC
-the smb share password.  In each case you should be very careful about
-security.  If you put the password here, make sure that this file is
-not readable by regular users!  See the "Setting up config.pl" section
-in the documentation for more information.
-
-This setting only matters if $Conf{XferMethod} = 'smb'.
-
-=item $Conf{TarShareName} = '/';
-
-Which host directories to backup when using tar transport.  This can be a
-string or an array of strings if there are multiple directories to
-backup per host.  Examples:
-
-
-  $Conf{TarShareName} = '/';			# backup everything
-  $Conf{TarShareName} = '/home';		# only backup /home
-  $Conf{TarShareName} = ['/home', '/src'];	# backup /home and /src
-
-The fact this parameter is called 'TarShareName' is for historical
-consistency with the Smb transport options.  You can use any valid
-directory on the client: there is no need for it to correspond to
-any Smb share or device mount point.
-
-Note also that you can also use $Conf{BackupFilesOnly} to specify
-a specific list of directories to backup.  It's more efficient to
-use this option instead of $Conf{TarShareName} since a new tar is
-run for each entry in $Conf{TarShareName}.
-
-This setting only matters if $Conf{XferMethod} = 'tar'.
-
-=item $Conf{FullPeriod} = 6.97;
-
-Minimum period in days between full backups. A full dump will only be
-done if at least this much time has elapsed since the last full dump,
-and at least $Conf{IncrPeriod} days has elapsed since the last
-successful dump.
-
-Typically this is set slightly less than an integer number of days. The
-time taken for the backup, plus the granularity of $Conf{WakeupSchedule}
-will make the actual backup interval a bit longer.
-
-=item $Conf{IncrPeriod} = 0.97;
-
-Minimum period in days between incremental backups (a user requested
-incremental backup will be done anytime on demand).
-
-Typically this is set slightly less than an integer number of days. The
-time taken for the backup, plus the granularity of $Conf{WakeupSchedule}
-will make the actual backup interval a bit longer.
-
-=item $Conf{FullKeepCnt} = 1;
-
-Number of full backups to keep.  Must be >= 1.
-
-In the steady state, each time a full backup completes successfully
-the oldest one is removed.  If this number is decreased, the
-extra old backups will be removed.
-
-If filling of incremental dumps is off the oldest backup always
-has to be a full (ie: filled) dump.  This might mean an extra full
-dump is kept until the second oldest (incremental) dump expires.
-
-=item $Conf{FullKeepCntMin} = 1;
-
-=item $Conf{FullAgeMax} = 60;
-
-Very old full backups are removed after $Conf{FullAgeMax} days.  However,
-we keep at least $Conf{FullKeepCntMin} full backups no matter how old
-they are.
-
-=item $Conf{IncrKeepCnt} = 6;
-
-Number of incremental backups to keep.  Must be >= 1.
-
-In the steady state, each time an incr backup completes successfully
-the oldest one is removed.  If this number is decreased, the
-extra old backups will be removed.
-
-=item $Conf{IncrKeepCntMin} = 1;
-
-=item $Conf{IncrAgeMax} = 30;
-
-Very old incremental backups are removed after $Conf{IncrAgeMax} days.
-However, we keep at least $Conf{IncrKeepCntMin} incremental backups no
-matter how old they are.
-
-=item $Conf{IncrFill} = 0;
-
-Whether incremental backups are filled.  "Filling" means that the
-most recent full (or filled) dump is merged into the new incremental
-dump using hardlinks.  This makes an incremental dump look like a
-full dump.  Prior to v1.03 all incremental backups were filled.
-In v1.4.0 and later the default is off.
-
-BackupPC, and the cgi interface in particular, do the right thing on
-un-filled incremental backups.  It will correctly display the merged
-incremental backup with the most recent filled backup, giving the
-un-filled incremental backups a filled appearance.  That means it
-invisible to the user whether incremental dumps are filled or not.
-
-Filling backups takes a little extra disk space, and it does cost
-some extra disk activity for filling, and later removal.  Filling
-is no longer useful, since file mangling and compression doesn't
-make a filled backup very useful. It's likely the filling option
-will be removed from future versions: filling will be delegated to
-the display and extraction of backup data.
-
-If filling is off, BackupPC makes sure that the oldest backup is
-a full, otherwise the following incremental backups will be
-incomplete.  This might mean an extra full backup has to be
-kept until the following incremental backups expire.
-
-The default is off.  You can turn this on or off at any
-time without affecting existing backups.
-
-=item $Conf{RestoreInfoKeepCnt} = 10;
-
-Number of restore logs to keep.  BackupPC remembers information about
-each restore request.  This number per client will be kept around before
-the oldest ones are pruned.
-
-Note: files/dirs delivered via Zip or Tar downloads don't count as
-restores.  Only the first restore option (where the files and dirs
-are written to the host) count as restores that are logged.
-
-=item $Conf{BackupFilesOnly} = undef;
-
-List of directories or files to backup.  If this is defined, only these
-directories or files will be backed up.
-
-For Smb, only one of $Conf{BackupFilesExclude} and $Conf{BackupFilesOnly}
-can be specified per share. If both are set for a particular share, then
-$Conf{BackupFilesOnly} takes precedence and $Conf{BackupFilesExclude}
-is ignored.
-
-This can be set to a string, an array of strings, or, in the case
-of multiple shares, a hash of strings or arrays.  A hash is used
-to give a list of directories or files to backup for each share
-(the share name is the key).  If this is set to just a string or
-array, and $Conf{SmbShareName} contains multiple share names, then
-the setting is assumed to apply to only the first share name.
-
-Examples:
-
-   $Conf{BackupFilesOnly} = '/myFiles';
-   $Conf{BackupFilesOnly} = ['/myFiles'];     # same as first example
-   $Conf{BackupFilesOnly} = ['/myFiles', '/important'];
-   $Conf{BackupFilesOnly} = {
-      'c' => ['/myFiles', '/important'],      # these are for 'c' share
-      'd' => ['/moreFiles', '/archive'],      # these are for 'd' share
-   }
-
-=item $Conf{BackupFilesExclude} = undef;
-
-List of directories or files to exclude from the backup.  For Smb,
-only one of $Conf{BackupFilesExclude} and $Conf{BackupFilesOnly}
-can be specified per share.  If both are set for a particular share,
-then $Conf{BackupFilesOnly} takes precedence and
-$Conf{BackupFilesExclude} is ignored.
-
-This can be set to a string, an array of strings, or, in the case
-of multiple shares, a hash of strings or arrays.  A hash is used
-to give a list of directories or files to exclude for each share
-(the share name is the key).  If this is set to just a string or
-array, and $Conf{SmbShareName} contains multiple share names, then
-the setting is assumed to apply to only the first share name.
-
-The exact behavior is determined by the underlying transport program,
-smbclient or tar.  For smbclient the exlclude file list is passed into
-the X option.  Simple shell wild-cards using "*" or "?" are allowed.
-
-For tar, if the exclude file contains a "/" it is assumed to be anchored
-at the start of the string.  Since all the tar paths start with "./",
-BackupPC prepends a "." if the exclude file starts with a "/".  Note
-that GNU tar version >= 1.3.7 is required for the exclude option to
-work correctly.  For linux or unix machines it is recommended to add
-"/proc" to $Conf{BackupFilesExclude}.
-
-Examples:
-
-   $Conf{BackupFilesExclude} = '/temp';
-   $Conf{BackupFilesExclude} = ['/temp'];     # same as first example
-   $Conf{BackupFilesExclude} = ['/temp', '/winnt/tmp'];
-   $Conf{BackupFilesExclude} = {
-      'c' => ['/temp', '/winnt/tmp'],         # these are for 'c' share
-      'd' => ['/junk', '/dont_back_this_up'], # these are for 'd' share
-   }
-
-=item $Conf{BlackoutBadPingLimit} = 3;
-
-=item $Conf{BlackoutGoodCnt} = 7;
-
-PCs that are always or often on the network can be backed up after
-hours, to reduce PC, network and server load during working hours. For
-each PC a count of consecutive good pings is maintained. Once a PC has
-at least $Conf{BlackoutGoodCnt} consecutive good pings it is subject
-to "blackout" and not backed up during hours and days specified by
-$Conf{BlackoutWeekDays}, $Conf{BlackoutHourBegin} and
-$Conf{BlackoutHourEnd}.
-
-To allow for periodic rebooting of a PC or other brief periods when a
-PC is not on the network, a number of consecutive bad pings is allowed
-before the good ping count is reset. This parameter is
-$Conf{BlackoutBadPingLimit}.
-
-Note that bad and good pings don't occur with the same interval. If a
-machine is always on the network, it will only be pinged roughly once
-every $Conf{IncrPeriod} (eg: once per day). So a setting for
-$Conf{BlackoutGoodCnt} of 7 means it will take around 7 days for a
-machine to be subject to blackout. On the other hand, if a ping is
-failed, it will be retried roughly every time BackupPC wakes up, eg,
-every one or two hours. So a setting for $Conf{BlackoutBadPingLimit} of
-3 means that the PC will lose its blackout status after 3-6 hours of
-unavailability.
-
-To disable the blackout feature set $Conf{BlackoutGoodCnt} to a negative
-value.  A value of 0 will make all machines subject to blackout.  But
-if you don't want to do any backups during the day it would be easier
-to just set $Conf{WakeupSchedule} to a restricted schedule.
-
-=item $Conf{BlackoutHourBegin} = 7.0;
-
-=item $Conf{BlackoutHourEnd} = 19.5;
-
-=item $Conf{BlackoutWeekDays} = [1, 2, 3, 4, 5];
-
-The default settings specify the blackout period from 7:00am to
-7:30pm local time on Mon-Fri.  For $Conf{BlackoutWeekDays},
-0 is Sunday, 1 is Monday etc.
-
-=back
-
-=head2 General per-PC configuration settings
-
-=over 4
-
-=item $Conf{XferMethod} = 'smb';
-
-What transport method to use to backup each host.  If you have
-a mixed set of WinXX and linux/unix hosts you will need to override
-this in the per-PC config.pl.
-
-The valid values are:
-
-  - 'smb': use smbclient and the SMB protocol.  Only choice for WinXX.
-
-  - 'tar': use tar, tar over ssh, rsh or nfs.  Best choice for
-           linux/unix.
-
-A future version should support 'rsync' as a transport method for
-more efficient backup of linux/unix machines (and perhaps WinXX??).
-
-=item $Conf{SmbClientPath} = '/usr/bin/smbclient';
-
-Full path for smbclient. Security caution: normal users should not
-allowed to write to this file or directory.
-
-smbclient is from the Samba distribution. smbclient is used to
-actually extract the incremental or full dump of the share filesystem
-from the PC.
-
-This setting only matters if $Conf{XferMethod} = 'smb'.
-
-=item $Conf{SmbClientArgs} = '';
-
-Additional optional arguments to smbclient.
-
-Some users have reported that the -b option can be used to improve
-performance of smbclient.  The default value is 4096, and if you
-find smbclient has low throughput you might try a value of 2048, eg:
-
-    $Conf{SmbClientArgs} = '-b 2048';
-
-This setting only matters if $Conf{XferMethod} = 'smb'.
-
-=item $Conf{TarClientCmd} = '$sshPath -q -n -l root $host' ...
-
-Full command to run tar on the client.  GNU tar is required.  You will
-need to fill in the correct paths for ssh2 on the local host (server)
-and GNU tar on the client.  Security caution: normal users should not
-allowed to write to these executable files or directories.
-
-See the documentation for more information about setting up ssh2 keys.
-
-If you plan to use NFS then tar just runs locally and ssh2 is not needed.
-For example, assuming the client filesystem is mounted below /mnt/hostName,
-you could use something like:
-
-   $Conf{TarClientCmd} = '$tarPath -c -v -f - -C /mnt/$host/$shareName'
-                       . ' --totals';
-
-In the case of NFS or rsh you need to make sure BackupPC's privileges
-are sufficient to read all the files you want to backup.  Also, you
-will probably want to add "/proc" to $Conf{BackupFilesExclude}.
-
-Several variables are substituted at run-time.  The following variables
-are substituted at run-time:
-
-  $host        host name
-  $hostIP      host's IP address
-  $incrDate    newer-than date for incremental backups
-  $shareName   share name to backup (ie: top-level directory path)
-  $fileList    specific files to backup or exclude
-  $tarPath     same as $Conf{TarClientPath}
-  $sshPath     same as $Conf{SshPath}
-
-If a variable is followed by a "+" it is shell escaped.  This is
-necessary for the command part of ssh or rsh, since it ends up
-getting passed through the shell.
-
-This setting only matters if $Conf{XferMethod} = 'tar'.
-
-=item $Conf{TarFullArgs} = '$fileList+';
-
-Extra tar arguments for full backups.  Several variables are substituted at
-run-time.  See $Conf{TarClientCmd} for the list of variable substitutions.
-
-This setting only matters if $Conf{XferMethod} = 'tar'.
-
-=item $Conf{TarIncrArgs} = '--newer=$incrDate+ $fileList+';
-
-Extra tar arguments for incr backups.  Several variables are substituted at
-run-time.  See $Conf{TarClientCmd} for the list of variable substitutions.
-
-Note that GNU tar has several methods for specifying incremental backups,
-including:
-
-  --newer-mtime $incrDate+
-         This causes a file to be included if the modification time is
-         later than $incrDate (meaning its contents might have changed).
-         But changes in the ownership or modes will not qualify the
-         file to be included in an incremental.
-
-  --newer=$incrDate+
-         This causes the file to be included if any attribute of the
-         file is later than $incrDate, meaning either attributes or
-         the modification time.  This is the default method.  Do
-         not use --atime-preserve in $Conf{TarClientCmd} above,
-         otherwise resetting the atime (access time) counts as an
-         attribute change, meaning the file will always be included
-         in each new incremental dump.
-
-This setting only matters if $Conf{XferMethod} = 'tar'.
-
-=item $Conf{TarClientRestoreCmd} = '$sshPath -q -l root $host' ...
-
-Full command to run tar for restore on the client.  GNU tar is required.
-This can be the same as $Conf{TarClientCmd}, with tar's -c replaced by -x
-and ssh's -n removed.
-
-See $Conf{TarClientCmd} for full details.
-
-This setting only matters if $Conf{XferMethod} = "tar".
-
-=item $Conf{TarClientPath} = '/bin/tar';
-
-Full path for tar on the client. Security caution: normal users should not
-allowed to write to this file or directory.
-
-This setting only matters if $Conf{XferMethod} = 'tar'.
-
-=item $Conf{SshPath} = '/usr/bin/ssh';
-
-Full path for ssh. Security caution: normal users should not
-allowed to write to this file or directory.
-
-=item $Conf{NmbLookupPath} = '/usr/bin/nmblookup';
-
-Full path for nmblookup. Security caution: normal users should not
-allowed to write to this file or directory.
-
-nmblookup is from the Samba distribution. nmblookup is used to get the
-netbios name, necessary for DHCP hosts.
-
-=item $Conf{FixedIPNetBiosNameCheck} = 0;
-
-For fixed IP address hosts, BackupPC_dump can also verify the netbios
-name to ensure it matches the host name.  An error is generated if
-they do not match.  Typically this flag is off.  But if you are going
-to transition a bunch of machines from fixed host addresses to DHCP,
-setting this flag is a great way to verify that the machines have
-their netbios name set correctly before turning on DCHP.
-
-=item $Conf{PingPath} = '/bin/ping';
-
-Full path to the ping command.  Security caution: normal users
-should not be allowed to write to this file or directory.
-
-If you want to disable ping checking, set this to some program
-that exits with 0 status, eg:
-
-    $Conf{PingPath} = '/bin/echo';
-
-=item $Conf{PingArgs} = '-c 1 $host';
-
-Options for the ping command.
-
-=item $Conf{CompressLevel} = 0;
-
-Compression level to use on files.  0 means no compression.  Compression
-levels can be from 1 (least cpu time, slightly worse compression) to
-9 (most cpu time, slightly better compression).  The recommended value
-is 3.  Changing to 5, for example, will take maybe 20% more cpu time
-and will get another 2-3% additional compression. See the zlib
-documentation for more information about compression levels.
-
-Changing compression on or off after backups have already been done
-will require both compressed and uncompressed pool files to be stored.
-This will increase the pool storage requirements, at least until all
-the old backups expire and are deleted.
-
-It is ok to change the compression value (from one non-zero value to
-another non-zero value) after dumps are already done.  Since BackupPC
-matches pool files by comparing the uncompressed versions, it will still
-correctly match new incoming files against existing pool files.  The
-new compression level will take effect only for new files that are
-newly compressed and added to the pool.
-
-If compression was off and you are enabling compression for the first
-time you can use the BackupPC_compressPool utility to compress the
-pool.  This avoids having the pool grow to accommodate both compressed
-and uncompressed backups.  See the documentation for more information.
-
-Note: compression needs the Compress::Zlib perl library.  If the
-Compress::Zlib library can't be found then $Conf{CompressLevel} is
-forced to 0 (compression off).
-
-=item $Conf{PingMaxMsec} = 20;
-
-Maximum round-trip ping time in milliseconds.  This threshold is set
-to avoid backing up PCs that are remotely connected through WAN or
-dialup connections.  The output from ping -s (assuming it is supported
-on your system) is used to check the round-trip packet time.  On your
-local LAN round-trip times should be much less than 20msec.  On most
-WAN or dialup connections the round-trip time will be typically more
-than 20msec.  Tune if necessary.
-
-=item $Conf{SmbClientTimeout} = 7200;
-
-Timeout in seconds when listening for the transport program's
-(smbclient, tar etc) stdout. If no output is received during this
-time, then it is assumed that something has wedged during a backup,
-and the backup is terminated.
-
-Note that stdout buffering combined with huge files being backed up
-could cause longish delays in the output from smbclient that
-BackupPC_dump sees, so in rare cases you might want to increase
-this value.
-
-Despite the name, this parameter sets the timeout for all transport
-methods (tar, smb etc).
-
-=item $Conf{MaxOldPerPCLogFiles} = 12;
-
-Maximum number of log files we keep around in each PC's directory
-(ie: pc/$host).  These files are aged monthly.  A setting of 12
-means there will be at most the files LOG, LOG.0, LOG.1, ... LOG.11
-in the pc/$host directory (ie: about a years worth).  (Except this
-month's LOG, these files will have a .z extension if compression
-is on).
-
-If you decrease this number after BackupPC has been running for a
-while you will have to manually remove the older log files.
-
-=back
-
-=head2 Email reminders, status and messages
-
-=over 4
-
-=item $Conf{SendmailPath} = '/usr/sbin/sendmail';
-
-Full path to the sendmail command.  Security caution: normal users
-should not allowed to write to this file or directory.
-
-=item $Conf{EMailNotifyMinDays} = 2.5;
-
-Minimum period between consecutive emails to a single user.
-This tries to keep annoying email to users to a reasonable
-level.  Email checks are done nightly, so this number is effectively
-rounded up (ie: 2.5 means a user will never receive email more
-than once every 3 days).
-
-=item $Conf{EMailFromUserName} = '';
-
-Name to use as the "from" name for email.  Depending upon your mail
-handler this is either a plain name (eg: "admin") or a fully-qualified
-name (eg: "admin@mydomain.com").
-
-=item $Conf{EMailAdminUserName} = '';
-
-Destination address to an administrative user who will receive a
-nightly email with warnings and errors.  If there are no warnings
-or errors then no email will be sent.  Depending upon your mail
-handler this is either a plain name (eg: "admin") or a fully-qualified
-name (eg: "admin@mydomain.com").
-
-=item $Conf{EMailNoBackupEverMesg} = ...;
-
-This message is sent to a user if their PC has never been backed up.
-If your mailer needs a fully-qualified To name, then change "$user"
-to "$user@mydomain.com" in the template, eg:
-
-	To: $user@mydomain.com
-
-=item $Conf{EMailNotifyOldBackupDays} = 7.0;
-
-How old the most recent backup has to be before notifying user.
-When there have been no backups in this number of days the user
-is sent an email.
-
-=item $Conf{EMailNoBackupRecentMesg} = ...;
-
-This message is sent to a user if their PC has not recently been
-backed up (ie: more than $Conf{EMailNotifyOldBackupDays} days ago).
-
-If your mailer needs a fully-qualified To name, then change "$user"
-to "$user@mydomain.com" in the template, eg:
-
-	To: $user@mydomain.com
-
-=item $Conf{EMailNotifyOldOutlookDays} = 5.0;
-
-How old the most recent backup of Outlook files has to be before
-notifying user.
-
-=item $Conf{EMailOutlookBackupMesg} = ...;
-
-This message is sent to a user if their Outlook files have not
-recently been backed up (ie: more than $Conf{EMailNotifyOldOutlookDays}
-days ago).
-
-If your mailer needs a fully-qualified To name, then change "$user"
-to "$user@mydomain.com" in the template, eg:
-
-	To: $user@mydomain.com
-
-=back
-
-=head2 CGI user interface configuration settings
-
-=over 4
-
-=item $Conf{CgiAdminUserGroup} = '';
-
-=item $Conf{CgiAdminUsers} = '';
-
-Normal users can only access information specific to their host.
-They can start/stop/browse/restore backups.
-
-Administrative users have full access to all hosts, plus overall
-status and log information.
-
-The administrative users are the union of the unix/linux group
-$Conf{CgiAdminUserGroup} and the manual list of users, separated
-by spaces, in $Conf{CgiAdminUsers}. If you don't want a group or
-manual list of users set the corresponding configuration setting
-to undef or an empty string.
-
-If you want every user to have admin privileges (careful!), set
-$Conf{CgiAdminUsers} = '*'.
-
-Examples:
-
-   $Conf{CgiAdminUserGroup} = 'admin';
-   $Conf{CgiAdminUsers}     = 'craig celia';
-   --> administrative users are the union of group admin, plus
-     craig and celia.
-
-   $Conf{CgiAdminUserGroup} = '';
-   $Conf{CgiAdminUsers}     = 'craig celia';
-   --> administrative users are only craig and celia'.
-
-=item $Conf{CgiUserHomePageCheck} = '';
-
-=item $Conf{CgiUserUrlCreate} = 'mailto:%s';
-
-User names that are rendered by the CGI interface can be turned
-into links into their home page or other information about the
-user.  To set this up you need to create two sprintf() strings,
-that each contain a single '%s' that will be replaced by the user
-name.  The default is a mailto: link.
-
-$Conf{CgiUserHomePageCheck} should be an absolute file path that
-is used to check (via "-f") that the user has a valid home page.
-Set this to undef or an empty string to turn off this check.
-
-$Conf{CgiUserUrlCreate} should be a full URL that points to the
-user's home page.  Set this to undef or an empty string to turn
-off generation of URLs for user names.
-
-Example:
-
-   $Conf{CgiUserHomePageCheck} = '/var/www/html/users/%s.html';
-   $Conf{CgiUserUrlCreate}     = 'http://myhost/users/%s.html';
-   --> if /var/www/html/users/craig.html exists, then 'craig' will
-     be rendered as a link to http://myhost/users/craig.html.
-
-=item $Conf{CgiDateFormatMMDD} = 1;
-
-Date display format for CGI interface.  True for US-style dates (MM/DD)
-and zero for international dates (DD/MM).
-
-=item $Conf{CgiHeaderFontType} = 'arial';
-
-=item $Conf{CgiHeaderFontSize} = '3';
-
-Header font and size for CGI interface
-
-=item $Conf{CgiNavBarBgColor} = '#ddeeee';
-
-=item $Conf{CgiHeaderBgColor} = '#99cc33';
-
-Color scheme for CGI interface.  Default values give a very light blue
-for the background navigation color and green for the header background.
-(You call tell I'm a better programmer than graphical designer.)
-
-=item $Conf{CgiHeaders} = '';
-
-Additional CGI header text.  For example, if you wanted each CGI page
-to auto refresh every 900 seconds, you could add this text:
-
-      
-
-=item $Conf{CgiImageDir} = '';
-
-Directory where images are stored.  This directory should be below
-Apache's DocumentRoot.  This value isn't used by BackupPC but is
-used by configure.pl when you upgrade BackupPC.
-
-Example:
-
-    $Conf{CgiImageDir} = '/usr/local/apache/htdocs/BackupPC';
-
-=item $Conf{CgiImageDirURL} = '';
-
-URL (without the leading http://host) for BackupPC's image directory.
-The CGI script uses this value to serve up image files.
-
-Example:
-
-    $Conf{CgiImageDirURL} = '/BackupPC';
-
-=back
-
+__CONFIGPOD__
 
 =head1 Version Numbers
 
diff --git a/lib/BackupPC/Lang/en.pm b/lib/BackupPC/Lang/en.pm
new file mode 100644
index 0000000..065a888
--- /dev/null
+++ b/lib/BackupPC/Lang/en.pm
@@ -0,0 +1,906 @@
+#!/usr/bin/perl -w
+
+#my %lang;
+
+#use strict;
+
+# --------------------------------
+
+$Lang{Start_Full_Backup} = "Start Full Backup";
+$Lang{Start_Incr_Backup} = "Start Incr Backup";
+$Lang{Stop_Dequeue_Backup} = "Stop/Dequeue Backup";
+$Lang{Restore} = "Restore";
+
+# -----
+
+$Lang{H_BackupPC_Server_Status} = "BackupPC Server Status";
+
+$Lang{BackupPC_Server_Status}= <
+\${h2(\"General Server Information\")}
+
+
      
+
    •  The servers PID is \$Info{pid},  on host \$Conf{ServerHost},
+     version \$Info{Version}, started at \$serverStartTime.
+
    •  This status was generated at \$now.
+
    •  PCs will be next queued at \$nextWakeupTime.
+
    •  Other info:
+    
        
+        
      • \$numBgQueue pending backup requests from last scheduled wakeup,
+        
      • \$numUserQueue pending user backup requests,
+        
      • \$numCmdQueue pending command requests,
+        \$poolInfo
+        
      • Pool file system was recently at \$Info{DUlastValue}%
+            (\$DUlastTime), today\'s max is \$Info{DUDailyMax}% (\$DUmaxTime)
+            and yesterday\'s max was \$Info{DUDailyMaxPrev}%.
+    
      
+
    
+
+\${h2("Currently Running Jobs")}
+
    
+
+
+    
+    
+    
+    
+    
+    
+    \$tarPidHdr
+\$jobStr
+
     Host  Type  User  Start Time  Command  PID  Xfer PID 
    
+
    
+
+\${h2("Failures that need attention")}
+
    
+
+
+    
+    
+    
+    
+    
+    
+\$statusStr
+
     Host  Type  User  Last Try  Details  Error Time  Last error (other than no ping) 
    
+EOF
+
+# --------------------------------
+$Lang{BackupPC__Server_Summary} = "BackupPC: Server Summary";
+$Lang{BackupPC_Summary}=<
+This status was generated at \$now.
+
    
+
+\${h2("Hosts with good Backups")}
+
    
+There are \$hostCntGood hosts that have been backed up, for a total of:
+
      
+
    •  \$fullTot full backups of total size \${fullSizeTot}GB
+     (prior to pooling and compression),
+
    •  \$incrTot incr backups of total size \${incrSizeTot}GB
+     (prior to pooling and compression).
+
    
+
+
+    
+    
+    
+    
+    
+    
+    
+    
+    
+\$strGood
+
     Host  User  #Full  Full Age/days  Full Size/GB  Speed MB/sec  #Incr  Incr Age/days  State  Last attempt 
    
+
    
+
+\${h2("Hosts with no Backups")}
+
    
+There are \$hostCntNone hosts with no backups.
+
    
+
+
+    
+    
+    
+    
+    
+    
+    
+    
+    
+\$strNone
+
     Host  User  #Full  Full Age/days  Full Size/GB  Speed MB/sec  #Incr  Incr Age/days  Current State  Last backup attempt 
    
+EOF
+
+# -----------------------------------
+$Lang{Pool_Stat} = <Pool is \${poolSize}GB comprising \$info->{"\${name}FileCnt"} files
+            and \$info->{"\${name}DirCnt"} directories (as of \$poolTime),
+        
  • Pool hashing gives \$info->{"\${name}FileCntRep"} repeated
+            files with longest chain \$info->{"\${name}FileRepMax"},
+        
  • Nightly cleanup removed \$info->{"\${name}FileCntRm"} files of
+            size \${poolRmSize}GB (around \$poolTime),
+EOF
+
+# --------------------------------
+$Lang{BackupPC__Backup_Requested_on__host} = "BackupPC: Backup Requested on \$host";
+# --------------------------------
+$Lang{REPLY_FROM_SERVER} = <
+Reply from server was: \$reply
+
    
+Go back to \$host home page.
+EOF
+# --------------------------------
+$Lang{BackupPC__Start_Backup_Confirm_on__host} = "BackupPC: Start Backup Confirm on \$host";
+# --------------------------------
+$Lang{Are_you_sure_start} = <
+You are about to start a \$type backup on \$host.
+
+
    
+
+
+
+Do you really want to do this?
+
+
+
    
+EOF
+# --------------------------------
+$Lang{BackupPC__Stop_Backup_Confirm_on__host} = "BackupPC: Stop Backup Confirm on \$host";
+# --------------------------------
+$Lang{Are_you_sure_stop} = <
+You are about to stop/dequeue backups on \$host;
+
+
    
+
+
+Also, please don\'t start another backup for
+ hours.
+
    
+Do you really want to do this?
+
+
+
    
+
+EOF
+# --------------------------------
+$Lang{Only_privileged_users_can_view_queues_} = "Only privileged users can view queues.";
+# --------------------------------
+$Lang{BackupPC__Queue_Summary} = "BackupPC: Queue Summary";
+# --------------------------------
+$Lang{Backup_Queue_Summary} = <
+\${h2("User Queue Summary")}
+
    
+The following user requests are currently queued:
+
+
+    
+    
+\$strUser
+
     Host  Req Time  User 
    
+
    
+
+\${h2("Background Queue Summary")}
+
    
+The following background requests are currently queued:
+
+
+    
+    
+\$strBg
+
     Host  Req Time  User 
    
+
    
+
+\${h2("Command Queue Summary")}
+
    
+The following command requests are currently queued:
+
+
+    
+    
+    
+\$strCmd
+
     Host  Req Time  User  Command 
    
+EOF
+
+# --------------------------------
+$Lang{Backup_PC__Log_File__file} = "BackupPC: Log File \$file";
+$Lang{Log_File__file__comment} = <
+EOF
+# --------------------------------
+$Lang{Contents_of_log_file} = <\$file, modified \$mtimeStr \$comment
+EOF
+
+# --------------------------------
+$Lang{skipped__skipped_lines} = "[ skipped \$skipped lines ]\n";
+# --------------------------------
+$Lang{_pre___Can_t_open_log_file__file} = "
    \nCan\'t open log file \$file\n";
+
+# --------------------------------
+$Lang{BackupPC__Log_File_History} = "BackupPC: Log File History";
+$Lang{Log_File_History__hdr} = <
+
+
+    
+    
+\$str
+
     File  Size  Modification time 
    
+EOF
+
+# -------------------------------
+$Lang{Recent_Email_Summary} = <
+
+
+    
+    
+    
+\$str
+
     Recipient  Host  Time  Subject 
    
+EOF
+ 
+
+# ------------------------------
+$Lang{Browse_backup__num_for__host} = "BackupPC: Browse backup \$num for \$host";
+
+# ------------------------------
+$Lang{Restore_Options_for__host} = "BackupPC: Restore Options for \$host";
+$Lang{Restore_Options_for__host2} = <
+You have selected the following files/directories from
+share \$share, backup number #\$num:
+
      
+\$fileListStr
+
    
+
    
+You have three choices for restoring these files/directories.
+Please select one of the following options.
+
    
+\${h2("Option 1: Direct Restore")}
+
    
+You can start a restore that will restore these files directly onto
+\$host.
+
    
+Warning: any existing files that match the ones you have
+selected will be overwritten!
+
+
    
+
+
+
+\$hiddenStr
+
+
+
+    
+    
+
+    
+    
+
+    
+    
+
+    
+
    Restore the files to host
    Restore the files to share
    Restore the files below dir
    (relative to share)
    
+
    
+EOF
+
+# ------------------------------
+$Lang{Option_2__Download_Zip_archive} = <
+You can download a Zip archive containing all the files/directories you have
+selected.  You can then use a local application, such as WinZip,
+to view or extract any of the files.
+
    
+Warning: depending upon which files/directories you have selected,
+this archive might be very very large.  It might take many minutes to
+create and transfer the archive, and you will need enough local disk
+space to store it.
+
    
+
    
+
+
+
+\$hiddenStr
+
+ Make archive relative
+to \${EscapeHTML(\$pathHdr eq "" ? "/" : \$pathHdr)}
+(otherwise archive will contain full paths).
+
    
+Compression (0=off, 1=fast,...,9=best)
+
+
    
+
+
    
+EOF
+
+# ------------------------------
+
+$Lang{Option_2__Download_Zip_archive2} = <
+You could download a zip archive, but Archive::Zip is not installed.
+Please ask your system adminstrator to install Archive::Zip from
+www.cpan.org.
+
    
+EOF
+
+
+# ------------------------------
+$Lang{Option_3__Download_Zip_archive} = <
+You can download a Tar archive containing all the files/directories you
+have selected.  You can then use a local application, such as tar or
+WinZip to view or extract any of the files.
+
    
+Warning: depending upon which files/directories you have selected,
+this archive might be very very large.  It might take many minutes to
+create and transfer the archive, and you will need enough local disk
+space to store it.
+
    
+
    
+
+
+
+\$hiddenStr
+
+ Make archive relative
+to \${EscapeHTML(\$pathHdr eq "" ? "/" : \$pathHdr)}
+(otherwise archive will contain full paths).
+
    
+
+
    
+EOF
+
+
+# ------------------------------
+$Lang{Restore_Confirm_on__host} = "BackupPC: Restore Confirm on \$host";
+
+$Lang{Are_you_sure} = <
+You are about to start a restore directly to the machine \$In{hostDest}.
+The following files will be restored to share \$In{shareDest}, from
+backup number \$num:
+
    
+
+
+\$fileListStr
+
    Original file/dirWill be restored to
    
+
+
    
+
+
+
+
+
+
+\$hiddenStr
+Do you really want to do this?
+
+
+
    
+EOF
+
+
+# --------------------------
+$Lang{Restore_Requested_on__hostDest} = "BackupPC: Restore Requested on \$hostDest";
+$Lang{Reply_from_server_was___reply} = <
+Reply from server was: \$reply
+
    
+Go back to \$hostDest home page.
+EOF
+
+# -------------------------
+$Lang{Host__host_Backup_Summary} = "BackupPC: Host \$host Backup Summary";
+
+$Lang{Host__host_Backup_Summary2} = <
+\$warnStr
+
      
+\$statusStr
+
    
+
+\${h2("User Actions")}
+
    
+
    
+
+\$startIncrStr
+
+
+
    
+
+\${h2("Backup Summary")}
+
    
+Click on the backup number to browse and restore backup files.
+
+
+    
+    
+    
+    
+    
+    
+
+\$str
+
     Backup#  Type  Filled  Start Date  Duration/mins  Age/days  Server Backup Path 
    
+
    
+
+\$restoreStr
+
+\${h2("Xfer Error Summary")}
+
    
+
+
+    
+    
+    
+    
+    
+    
+
+\$errStr
+
     Backup#  Type  View  #Xfer errs  #bad files  #bad share  #tar errs 
    
+
    
+
+\${h2("File Size/Count Reuse Summary")}
+
    
+Existing files are those already in the pool; new files are those added
+to the pool.
+Empty files and SMB errors aren\'t counted in the reuse and new counts.
+
+
+    
+    
+    
+
+
+    
+    
+    
+    
+    
+    
+    
+    
+    
+
+\$sizeStr
+
     Totals  Existing Files  New Files 
     Backup#  Type  #Files  Size/MB  MB/sec  #Files  Size/MB  #Files  Size/MB 
    
+
    
+
+\${h2("Compression Summary")}
+
    
+Compression performance for files already in the pool and newly
+compressed files.
+
+
+    
+    
+
+
+    
+    
+    
+    
+    
+    
+    
+    
+
+\$compStr
+
     Existing Files  New Files 
     Backup#  Type  Comp Level  Size/MB  Comp/MB  Comp  Size/MB  Comp/MB  Comp 
    
+
    
+EOF
+
+# -------------------------
+$Lang{Error} = "BackupPC: Error";
+$Lang{Error____head} = <\$mesg
    
+EOF
+
+# -------------------------
+$Lang{NavSectionTitle_} = "Server";
+
+# -------------------------
+$Lang{Backup_browse_for__host} = <
+
+
+
+
      
+
    •  You are browsing backup #\$num, which started around \$backupTime
+        (\$backupAge days ago),
+\$filledBackup
+
    •  Click on a directory below to navigate into that directory,
+
    •  Click on a file below to restore that file.
+
    
+
+\${h2("Contents of \${EscapeHTML(\$dirDisplay)}")}
+
    
+
+
+
+
+
    
+
+
    
+    
+    
    
+    \$dirStr
+    
    
+    		
+
+    
+    
    
+    
    
+        
+        \$fileHeader
+        \$topCheckAll
+        \$fileStr
+        \$checkAll
+        
    
+    
    
+
    
+
+
    
+
    
+EOF
+
+# ------------------------------
+$Lang{Restore___num_details_for__host} = "BackupPC: Restore #\$num details for \$host";
+
+$Lang{Restore___num_details_for__host2 } = <
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
     Number  \$Restores[\$i]{num} 
     Requested by  \$RestoreReq{user} 
     Request time  \$reqTime 
     Result  \$Restores[\$i]{result} 
     Error Message  \$Restores[\$i]{errorMsg} 
     Source host  \$RestoreReq{hostSrc} 
     Source backup num  \$RestoreReq{num} 
     Source share  \$RestoreReq{shareSrc} 
     Destination host  \$RestoreReq{hostDest} 
     Destination share  \$RestoreReq{shareDest} 
     Start time  \$startTime 
     Duration  \$duration min 
     Number of files  \$Restores[\$i]{nFiles} 
     Total size  \${MB} MB 
     Transfer rate  \$MBperSec MB/sec 
     TarCreate errors  \$Restores[\$i]{tarCreateErrs} 
     Xfer errors  \$Restores[\$i]{xferErrs} 
     Xfer log file 
+View,
+Errors
+
    
+
    
+\${h1("File/Directory list")}
+
    
+
+
+\$fileListStr
+
    Original file/dirRestored to
    
+EOF
+
+# -----------------------------------
+$Lang{Email_Summary} = "BackupPC: Email Summary";
+
+# -----------------------------------
+#  !! ERROR messages !!
+# -----------------------------------
+$Lang{BackupPC__Lib__new_failed__check_apache_error_log} = "BackupPC::Lib->new failed: check apache error_log\n";
+$Lang{Wrong_user__my_userid_is___} =  
+              "Wrong user: my userid is \$>, instead of \$uid"
+            . "(\$Conf{BackupPCUser})\n";
+$Lang{Only_privileged_users_can_view_PC_summaries} = "Only privileged users can view PC summaries.";
+$Lang{Only_privileged_users_can_stop_or_start_backups} = 
+                  "Only privileged users can stop or start backups on"
+		. " \${EscapeHTML(\$host)}.";
+$Lang{Invalid_number__num} = "Invalid number \$num";
+$Lang{Unable_to_open__file__configuration_problem} = "Unable to open \$file: configuration problem?";
+$Lang{Only_privileged_users_can_view_log_or_config_files} = "Only privileged users can view log or config files.";
+$Lang{Only_privileged_users_can_view_log_files} = "Only privileged users can view log files.";
+$Lang{Only_privileged_users_can_view_email_summaries} = "Only privileged users can view email summaries.";
+$Lang{Only_privileged_users_can_browse_backup_files} = "Only privileged users can browse backup files"
+                . " for host \${EscapeHTML(\$In{host})}.";
+$Lang{Empty_host_name} = "Empty host name.";
+$Lang{Can_t_browse_bad_directory_name} = "Can\'t browse bad directory name"
+	            . " \${EscapeHTML(\"\$TopDir/pc/\$host/\$num\")}";
+$Lang{Directory___EscapeHTML} = "Directory \${EscapeHTML(\"\$TopDir/pc/\$host/\$num\")}"
+		    . " is empty";
+$Lang{Can_t_browse_bad_directory_name2} = "Can\'t browse bad directory name"
+	            . " \${EscapeHTML(\$fullDir)}";
+$Lang{Only_privileged_users_can_restore_backup_files} = "Only privileged users can restore backup files"
+                . " for host \${EscapeHTML(\$In{host})}.";
+$Lang{Bad_host_name} = "Bad host name \${EscapeHTML(\$host)}";
+$Lang{You_haven_t_selected_any_files__please_go_Back_to} = "You haven\'t selected any files; please go Back to"
+                . " select some files.";
+$Lang{Nice_try__but_you_can_t_put} = "Nice try, but you can\'t put \'..\' in any of the file names";
+$Lang{Can_t_fork_for_tar_restore} = "Can\'t fork for tar restore";
+$Lang{Can_t_fork_for_zip_restore} = "Can\'t fork for zip restore";
+$Lang{Host__doesn_t_exist} = "Host \${EscapeHTML(\$In{hostDest})} doesn\'t exist";
+$Lang{You_don_t_have_permission_to_restore_onto_host} = "You don\'t have permission to restore onto host"
+		    . " \${EscapeHTML(\$In{hostDest})}";
+$Lang{Can_t_open_create} = "Can\'t open/create "
+                    . "\${EscapeHTML(\"\$TopDir/pc/\$hostDest/\$reqFileName\")}";
+$Lang{Only_privileged_users_can_restore_backup_files2} = "Only privileged users can restore backup files"
+                . " for host \${EscapeHTML(\$host)}.";
+$Lang{Empty_host_name} = "Empty host name";
+$Lang{Can_t_restore_bad_file} = "Can\'t restore bad file \${EscapeHTML(\$fullPath)}";
+$Lang{Unknown_host_or_user} = "Unknown host or user \${EscapeHTML(\$host)}";
+$Lang{Only_privileged_users_can_view_information_about} = "Only privileged users can view information about"
+                . " host \${EscapeHTML(\$host)}." ;
+$Lang{Only_privileged_users_can_view_restore_information} = "Only privileged users can view restore information.";
+$Lang{Restore_number__num_for_host__does_not_exist} = "Restore number \$num for host \${EscapeHTML(\$host)} does"
+	        . " not exist.";
+
+$Lang{Unable_to_connect_to_BackupPC_server} = "Unable to connect to BackupPC server",
+            "This CGI script (\$MyURL) is unable to connect to the BackupPC"
+          . " server on \$Conf{ServerHost} port \$Conf{ServerPort}.  The error"
+          . " was: \$err.",
+            "Perhaps the BackupPC server is not running or there is a "
+          . " configuration error.  Please report this to your Sys Admin.";
+
+$Lang{Can_t_find_IP_address_for} = "Can\'t find IP address for \${EscapeHTML(\$host)}";
+
+$Lang{host_is_a_DHCP_host} = <
+Until I see \$host at a particular DHCP address, you can only
+start this request from the client machine itself.
+EOF
+
+# ------------------------------------
+# !! Server Mesg !!
+# ------------------------------------
+
+# do not translate the firsts, used by server
+$Lang{backup__In_hostIP___host} = "backup \$In{hostIP} \$host"
+                                . " \$User \$doFull";
+$Lang{backup__host__host__User__doFull} = "backup \$host \$host \$User \$doFull";
+$Lang{restore__ipAddr} = "restore \$ipAddr"
+                       . " \$hostDest \$User \$reqFileName";
+$Lang{stop__host__User__In_backoff} = "stop \$host \$User \$In{backoff}";
+
+########################
+# ok you can do it then
+########################
+
+$Lang{Backup_requested_on_DHCP__host} = "Backup requested on DHCP \$host (\$In{hostIP}) by"
+		                      . " \$User from \$ENV{REMOTE_ADDR}";
+
+$Lang{Backup_requested_on__host_by__User} = "Backup requested on \$host by \$User";
+$Lang{Backup_stopped_dequeued_on__host_by__User} = "Backup stopped/dequeued on \$host by \$User";
+$Lang{log_Can_t_fork_for_tar_restore_request_by__User} = "log Can\'t fork for tar restore request by \$User";
+$Lang{log_User__User_downloaded_tar_archive_for__host} = "log User \$User downloaded tar archive for \$host,"
+                           . " backup \$num; files were: "
+			   . " \${join(\", \", \@fileListTrim)}";
+
+$Lang{log_Can_t_fork_for_zip_restore_request_by__User} = "log Can\'t fork for zip restore request by \$User";
+
+$Lang{log_User__User_downloaded_zip_archive_for__host}= "log User \$User downloaded zip archive for \$host,"
+                           . " backup \$num; files were: "
+                           . "\${join(\", \", \@fileListTrim)}";
+
+$Lang{Restore_requested_to_host__hostDest__backup___num} = "Restore requested to host \$hostDest, backup #\$num,"
+	     . " by \$User from \$ENV{REMOTE_ADDR}";
+
+# -------------------------------------------------
+# ------- Stuff that was forgotten ----------------
+# -------------------------------------------------
+
+$Lang{Status} = "Status";
+$Lang{PC_Summary} = "PC Summary";
+$Lang{LOG_file} = "LOG file";
+$Lang{Old_LOGs} = "Old LOGs";
+$Lang{Email_summary} = "Email summary";
+$Lang{Config_file} = "Config file";
+$Lang{Hosts_file} = "Hosts file";
+$Lang{Current_queues} = "Current queues";
+$Lang{Documentation} = "Documentation";
+
+$Lang{Host_or_User_name} = "Host or User name:";
+$Lang{Go} = "Go";
+$Lang{Hosts} = "Hosts";
+
+$Lang{This_PC_has_never_been_backed_up} = "
     This PC has never been backed up!! 
    \n";
+$Lang{This_PC_is_used_by} = "
  • This PC is used by \${UserLink(\$user)}";
+
+# ------------
+$Lang{Last_email_sent_to__was_at___subject} = <Last email sent to \${UserLink(\$user)} was at \$mailTime, subject "\$subj".
+EOF
+# ------------
+$Lang{The_command_cmd_is_currently_running_for_started} = <The command \$cmd is currently running for \$host, started \$startTime.
+EOF
+
+# -----------
+$Lang{Host_host_is_queued_on_the_background_queue_will_be_backed_up_soon} = <Host \$host is queued on the background queue (will be backed up soon).
+EOF
+
+# ----------
+$Lang{Host_host_is_queued_on_the_user_queue__will_be_backed_up_soon} = <Host \$host is queued on the user queue (will be backed up soon).
+EOF
+
+# ---------
+$Lang{A_command_for_host_is_on_the_command_queue_will_run_soon} = <A command for \$host is on the command queue (will run soon).
+EOF
+
+# --------
+$Lang{Last_status_is_state_StatusHost_state_reason_as_of_startTime} = <Last status is state \"\$StatusHost{state}\"\$reason
+    as of \$startTime.
+EOF
+
+# --------
+$Lang{Last_error_is____EscapeHTML_StatusHost_error} = <Last error is \"\${EscapeHTML(\$StatusHost{error})}\"
+EOF
+
+# ------
+$Lang{Pings_to_host_have_failed_StatusHost_deadCnt__consecutive_times} = <Pings to \$host have failed \$StatusHost{deadCnt} consecutive times.
+EOF
+
+# -----
+$Lang{Prior_to_that__pings} = "Prior to that, pings";
+
+# -----
+$Lang{priorStr_to_host_have_succeeded_StatusHostaliveCnt_consecutive_times} = <\$priorStr to \$host have succeeded \$StatusHost{aliveCnt}
+        consecutive times.
+EOF
+
+$Lang{Because__host_has_been_on_the_network_at_least__Conf_BlackoutGoodCnt_consecutive_times___} = <Because \$host has been on the network at least \$Conf{BlackoutGoodCnt}
+consecutive times, it will not be backed up from \$t0 to \$t1 on \$days.
+EOF
+
+$Lang{Backups_are_deferred_for_hours_hours_change_this_number} = <Backups are deferred for \$hours hours
+(change this number).
+EOF
+
+$Lang{info_jobs_hosts_queueLen} = "info jobs hosts queueLen";
+
+$Lang{tryIP} = " and \$StatusHost{dhcpHostIP}";
+
+$Lang{Host_Inhost} = "Host \$In{host}";
+
+$Lang{checkAll} = <
+ Select all
+
+
+
+EOF
+
+$Lang{fileHeader} = < Name
+        Type
+        Mode
+        Size
+        Mod time
+    
+EOF
+
+$Lang{Home} = "Home";
+$Lang{Last_bad_XferLOG} = "Last bad XferLOG";
+$Lang{Last_bad_XferLOG_errors_only} = "Last bad XferLOG (errors only)";
+
+$Lang{This_display_is_merged_with_backup} = < This display is merged with backup #\$numF, the most recent prior
+     filled (full) dump.
+EOF
+
+$Lang{Restore_Summary} = <
+Click on the restore number for more details.
+
+
+    
+    
+    
+    
+    
+    
+    
+
+\$restoreStr
+
     Restore#  Result  Start Date Dur/mins #files  MB  #tar errs  #xferErrs 
    
+
    
+EOF
+
+$Lang{BackupPC__Documentation} = "BackupPC: Documentation";
+
+$Lang{No} = "no";
+$Lang{Yes} = "yes";
+
+$Lang{The_directory_is_empty} = <The directory \${EscapeHTML(\$dirDisplay)} is empty
+
+EOF
+
+$Lang{on} = "on";
+$Lang{off} = "off";
+
+$Lang{full} = "full";
+$Lang{incremental} = "incr";
+
+$Lang{failed} = "failed";
+$Lang{success} = "success";
+$Lang{and} = "and";
+
+#end of lang_en.pm
diff --git a/lib/BackupPC/Lang/fr.pm b/lib/BackupPC/Lang/fr.pm
new file mode 100644
index 0000000..e0afdda
--- /dev/null
+++ b/lib/BackupPC/Lang/fr.pm
@@ -0,0 +1,932 @@
+#!/usr/bin/perl -w
+
+#my %lang;
+#use strict;
+
+# --------------------------------
+
+$Lang{Start_Full_Backup} = "Démarrer sauvegarde complète";
+$Lang{Start_Incr_Backup} = "Départ de la sauvegarde incrémentale";
+$Lang{Stop_Dequeue_Backup} = "Arrêter/annuler sauvegarde";
+$Lang{Restore} = "Restore";
+
+# -----
+
+$Lang{H_BackupPC_Server_Status} = "Status du serveur BackupPC";
+$Lang{BackupPC_Server_Status}= <
+\${h2(\"Informations Générales du serveur\")}
+
+
      
+
    •  Le PID du serveur est \$Info{pid}, sur l\'hôte \$Conf{ServerHost},
+     version \$Info{Version}, démarré le \$serverStartTime.
+
    •  Ce rapport à été généré le \$now.
+
    •  La prochaine file d\'attente sera remplie le \$nextWakeupTime.
+
    •  Autres info:
+    
        
+        
      • \$numBgQueue demandes de sauvegardes en attente depuis le dernier réveil automatique,
+        
      • \$numUserQueue requêtes de sauvegardes utilisateur en attente,
+        
      • \$numCmdQueue requêtes de commandes en attente,
+        \$poolInfo
+        
      • L\'espace de stockage a été récemment rempli à \$Info{DUlastValue}%
+            (\$DUlastTime), le maximum d\'aujourd\'hui est \$Info{DUDailyMax}% (\$DUmaxTime)
+            et hier le maximum était \$Info{DUDailyMaxPrev}%.
+    
      
+
    
+
+\${h2("Travaux en cours d'exécution")}
+
    
+
+
+    
+    
+    
+    
+    
+    
+    \$tarPidHdr
+\$jobStr
+
     Hôte  Type  Utilisateur  Date de départ  Commande  PID  Xfer PID 
    
+
    
+
+\${h2("Échecs qui demandent de l'attention")}
+
    
+
+
+    
+    
+    
+    
+    
+    
+\$statusStr
+
     Hôte  Type  Utilisateur  Dernier essai  Détails  Date d\'erreur  Dernière erreur (autre que pas de ping) 
    
+EOF
+
+# --------------------------------
+$Lang{BackupPC__Server_Summary} = "BackupPC: Résumé du serveur";
+$Lang{BackupPC_Summary}=<
+Ce statut a été généré le \$now.
+
    
+
+\${h2("Hôtes avec de bonnes sauvegardes")}
+
    
+Il y a \$hostCntGood hôtes ayant été sauvegardés, avec un total de :
+
      
+
    •  \$fullTot sauvegardes complètes de tailles cumulées \${fullSizeTot} Go
+     (précédant le hachage et la compression),
+
    •  \$incrTot sauvegardes incrémentales de tailles cumulées \${incrSizeTot} Go
+     (précédant le hachage et la compression).
+
    
+
+
+    
+    
+    
+    
+    
+    
+    
+    
+    
+\$strGood
+
     Hôte  Utilisateur  nb complètes  complètes Âge/Jours  complètes Taille/Go  Vitesse Mo/sec  nb incrémentales  Incr Age/Jours  État actuel Dernière tentative 
    
+
    
+
+\${h2("Hôtes sans sauvegardes")}
+
    
+Il y a \$hostCntNone hôtes sans sauvegardes.
+
    
+
+
+    
+    
+    
+    
+    
+    
+    
+    
+    
+\$strNone
+
     Hôte  Utilisateur  Nb complètes  Complètes Age/jour  Complètes Taille/Go  Vitesse Mo/sec  Nb incrémentales  Incrémentales Age/jours  État actuel  Dernière tentative 
    
+EOF
+
+# -----------------------------------
+$Lang{Pool_Stat} = <Le disque dispose de \${poolSize} Go avec \$info->{"\${name}FileCnt"} fichiers
+            et \$info->{"\${name}DirCnt"} repertoires (depuis le \$poolTime),
+        
  • Le hachage des fichiers donne \$info->{"\${name}FileCntRep"} fichiers répétés
+            avec comme plus longue chaîne \$info->{"\${name}FileRepMax"},
+        
  • Le nettoyage nocturne a effacé \$info->{"\${name}FileCntRm"} fichiers, soit
+            \${poolRmSize} Go (vers \$poolTime),
+EOF
+
+# -----------------------------------
+$Lang{BackupPC__Backup_Requested_on__host} = "BackupPC: Sauvegarde demandée sur \$host";
+# --------------------------------
+$Lang{REPLY_FROM_SERVER} = <
+La réponse du serveur a été: \$reply
+
    
+Retourner à la page d\'accueil de \$host.
+EOF
+# --------------------------------
+$Lang{BackupPC__Start_Backup_Confirm_on__host} = "BackupPC: Confirmation du départ de la sauvegarde de \$host";
+# --------------------------------
+$Lang{Are_you_sure_start} = <
+Vous allez bientôt démarrer une sauvegarde \$type depuis \$host.
+
+
    
+
+
+
+Voulez vous vraiment le faire ?
+
+
+
    
+EOF
+# --------------------------------
+$Lang{BackupPC__Stop_Backup_Confirm_on__host} = "BackupPC: Confirmer l\'arrêt de la sauvegarde sur \$host";
+# --------------------------------
+$Lang{Are_you_sure_stop} = <
+Vous êtes sur le point d\'arrêter/supprimer de la file les sauvegardes de \$host;
+
+
    
+
+
+En outre, prière de ne pas démarrer d\'autres sauvegarde avant
+ heures.
+
    
+Voulez vous vraiment le faire ?
+
+
+
    
+
+EOF
+# --------------------------------
+$Lang{Only_privileged_users_can_view_queues_} = "Seuls les utilisateurs privilégiés peuvent voir les files.";
+# --------------------------------
+$Lang{BackupPC__Queue_Summary} = "BackupPC: Résumé de la file";
+# --------------------------------
+$Lang{Backup_Queue_Summary} = <
+\${h2("Résumé des files des utilisateurs")}
+
    
+Les demandes utilisateurs suivantes sont actuellement en attente :
+
+
+    
+    
+\$strUser
+
     Hôte  Temps Requis  Utilisateur 
    
+
    
+
+\${h2("Résumé de la file en arrière plan")}
+
    
+Les demandes en arrière plan suivantes sont actuellement en attente :
+
+
+    
+    
+\$strBg
+
     Hôte  Temps requis  Utilisateur 
    
+
    
+
+\${h2("Résumé de la file d\'attente des commandes")}
+
    
+Les demandes de commande suivantes sont actuellement en attente :
+
+
+    
+    
+    
+\$strCmd
+
     Hôtes  Temps Requis  Utilisateur  Commande 
    
+EOF
+# --------------------------------
+$Lang{Backup_PC__Log_File__file} = "BackupPC: Fichier de log \$file";
+$Lang{Log_File__file__comment} = <
+EOF
+# --------------------------------
+$Lang{Contents_of_log_file} = <\$file, modifié le \$mtimeStr \$comment
+EOF
+
+# --------------------------------
+$Lang{skipped__skipped_lines} = "[ \$skipped lignes sautées ]\n";
+# --------------------------------
+$Lang{_pre___Can_t_open_log_file__file} = "
    \nNe peut pas ouvrir le fichier de log \$file\n";
+
+# --------------------------------
+$Lang{BackupPC__Log_File_History} = "BackupPC: Historique du fichier de log";
+$Lang{Log_File_History__hdr} = <
+
+
+    
+    
+\$str
+
     Fichier  Taille  Date de modification 
    
+EOF
+
+# -------------------------------
+$Lang{Recent_Email_Summary} = <
+
+
+    
+    
+    
+\$str
+
     Recipient   Hôte  Date  Sujet 
    
+EOF
+
+
+# ------------------------------
+$Lang{Browse_backup__num_for__host} = "BackupPC: Navigation dans la sauvegarde \$num de \$host";
+
+# ------------------------------
+$Lang{Restore_Options_for__host} = "BackupPC: Options de restauration sur \$host";
+$Lang{Restore_Options_for__host2} = <
+Vous avez sélectionné les fichiers/repertoires suivants depuis le partage 
+\$share, sauvegarde numéro \$num:
+
      
+\$fileListStr
+
    
+
    
+Vous avez trois choix pour restaurer ces fichiers/repertoires.
+Veuillez sélectionner une des options suivantes.
+
    
+\${h2("Option 1: Restauration directe")}
+
    
+Vous pouvez démarrer une restauration qui va restaurer ces fichiers 
+directement sur \$host.
+
    
+Attention:
+tout les fichiers correspondant à ceux que vous avez sélectionnés vont être effacés !
+
+
    
+
+
+
+\$hiddenStr
+
+
+
+    
+    
+
+    
+    
+
+    
+    
+
+    
+
    Restaurer les fichiers vers l\'hôte
    Restaurer les fichiers vers le partage
    Restaurer les fichiers du répertoire
    (relatif au partage)
    
+
    
+EOF
+
+
+# ------------------------------
+$Lang{Option_2__Download_Zip_archive} = <
+Vous pouvez télécharger une archive zippée contenant tous les fichiers/répertoires que vous 
+avez sélectionnés. Vous pouvez utiliser une application locale, comme Winzip, pour 
+voir ou extraire n\'importe quel fichier.
+
    
+Attention: en fonction de quels fichiers/répertoires vous avez sélectionné,
+cette archive peut devenir très très large.  Cela peut prendre plusieurs minutes pour créer
+et transférer cette archive, et vous aurez besoin d\'assez d\'espace disque pour le stocker.
+
    
+
    
+
+
+
+\$hiddenStr
+
+ Faire l\'archive relative à
+\${EscapeHTML(\$pathHdr eq "" ? "/" : \$pathHdr)}
+(Autrement l\'archive contiendra les chemins complets).
+
    
+Compression (0=désactivée, 1=rapide,...,9=meilleure)
+
+
    
+
+
    
+EOF
+
+
+# ------------------------------
+
+$Lang{Option_2__Download_Zip_archive2} = <
+Vous pouvez télécharger une archive zippée, mais Archive::Zip n\'est pas
+installé. Vous pouvez demander à votre administrateur système d\'installer 
+Archive::Zip depuis www.cpan.org.
+
    
+EOF
+
+
+# ------------------------------
+$Lang{Option_3__Download_Zip_archive} = <
+
+Vous pouvez télécharger une archive Tar contenant tous les fichiers/répertoires 
+que vous avez sélectionnés. Vous pouvez alors utiliser une application locale, 
+comme tar ou winzip pour voir ou extraire n\'importe quel fichier.
+
    
+Attention: en fonction des fichiers/répertoires que vous avez sélectionnés,
+cette archive peut devenir très très large.  Cela peut prendre beaucoup de temps 
+(plusieurs minutes) pour créer et transfèrer l\'archive, et vous aurez besoin de beaucoup
+d\'espace disque local pour le stocker.
+
    
+
    
+
+
+
+\$hiddenStr
+
+ Faire l\'archive relative à
+\${EscapeHTML(\$pathHdr eq "" ? "/" : \$pathHdr)}
+(Autrement l\'archive contiendra des chemins absolus).
+
    
+
+
    
+EOF
+
+
+
+# ------------------------------
+$Lang{Restore_Confirm_on__host} = "BackupPC: Confirmation de restauration sur \$host";
+
+$Lang{Are_you_sure} = <
+Vous êtes sur le point de démarrer une restauration directement sur la machine 
+\$In{hostDest}.
+Les fichiers suivants vont être restaurés dans le partage \$In{shareDest}, depuis
+la sauvegarde numéro \$num:
+
    
+
+
+\$fileListStr
+
    Fichier/Répertoire originalVa être restauré à
    
+
+
    
+
+
+
+
+
+
+\$hiddenStr
+Voulez-vous vraiment le faire ?
+
+
+
    
+EOF
+
+# --------------------------
+$Lang{Restore_Requested_on__hostDest} = "BackupPC: Restauration demandée sur \$hostDest";
+$Lang{Reply_from_server_was___reply} = <
+La réponse du serveur est: \$reply
+
    
+Retourner à la page d\'acceuil de \$hostDest .
+EOF
+
+
+# -------------------------
+$Lang{Host__host_Backup_Summary} = "BackupPC: Résumé de la sauvegarde de l\'hôte \$host ";
+
+$Lang{Host__host_Backup_Summary2} = <
+\$warnStr
+
      
+\$statusStr
+
    
+
+\${h2("Actions de l\'utilisateur")}
+
    
+
    
+
+\$startIncrStr
+
+
+
    
+
+\${h2("Résumé de la sauvegarde")}
+
    
+Cliquer sur le numéro de l\'archive pour naviguer et restaurer les fichiers de sauvegarde.
+
+
+    
+     
+    
+    
+    
+    
+
+\$str
+
     Sauvegarde n°  Type  terminée  Date de démarrage  Durée/mins  Age/jours  Chemin d\'accès sauvegarde sur serveur 
    
+
    
+
+\$restoreStr
+
+\${h2("Résumé des erreurs de transfert")}
+
    
+
+
+    
+    
+    
+    
+    
+    
+
+\$errStr
+
     Nb sauvegarde  Type  View   Nb erreurs transfert  Nb mauvais fichiers  Nb mauvais partages  Nb erreurs tar 
    
+
    
+
+\${h2("Résumé de Taille fichier/Nombre de réutilisations")}
+
    
+    Les fichiers existants sont ceux qui sont déjà sur le serveur; 
+Les nouveaux fichiers sont ceux qui ont été ajoutés au serveur.
+Les fichiers vides et les erreurs de SMB ne sont pas comptabilisés parmis
+les nouveaux et les réutilisés.
+
+
+
+    
+    
+    
+
+
+    
+    
+    
+    
+    
+    
+    
+    
+    
+
+\$sizeStr
+
     Totaux  Fichiers existants  Nouveaux fichiers 
     Nb de sauvegarde   Type  Nb de Fichiers  Taille/Mo  Mo/sec  Nb de Fichiers  Taille/MB  Nb de Fichiers  Taille/Mo 
    
+
    
+
+\${h2("Résumé de la compression")}
+
    
+
+Performance de compression pour les fichiers déjà sur le serveur et
+récemment compressés.
+
+
+
+    
+    
+
+
+    
+    
+    
+    
+    
+    
+    
+    
+
+\$compStr
+
     Fichiers existants  Nouveaux fichiers 
     Nb de sauvegardes  Type  Niveau de Compression  Taille/Mo  Comp/Mo  Comp  Taille/Mo  Comp/Mo  Compression 
    
+
    
+EOF
+
+# -------------------------
+$Lang{Error} = "BackupPC: Erreur";
+$Lang{Error____head} = <\$mesg
    
+EOF
+
+# -------------------------
+$Lang{NavSectionTitle_} = "Serveur";
+
+
+# -------------------------
+$Lang{Backup_browse_for__host} = <
+
+
+
+
      
+
    •  Vous naviguez dans la sauvegarde n°\$num, qui a commencé vers \$backupTime
+        (il y a \$backupAge jours),
+\$filledBackup
+
    •  Cliquer dans un répertoire ci-dessous pour naviguer dedans,
+
    •  Cliquer dans un fichier ci-dessous pour le restaurer..
+
    
+
+\${h2("Contenu de \${EscapeHTML(\$dirDisplay)}")}
+
    
+
+
+
+
+
    
+
+
    
+    
+    
    
+    \$dirStr
+    
    
+    		
+
+    
+    
    
+    
    
+        
+        \$fileHeader
+        \$topCheckAll
+        \$fileStr
+        \$checkAll
+        
    
+    
    
+
    
+
+
    
+
    
+EOF
+
+
+# ------------------------------
+
+# FIXME
+$Lang{Restore___num_details_for__host} = "BackupPC: Restore #\$num details for \$host"; 
+
+$Lang{Restore___num_details_for__host2 } = <
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
     Number  \$Restores[\$i]{num} 
     Requested by  \$RestoreReq{user} 
     Request time  \$reqTime 
     Result  \$Restores[\$i]{result} 
     Error Message  \$Restores[\$i]{errorMsg} 
     Source host  \$RestoreReq{hostSrc} 
     Source backup num  \$RestoreReq{num} 
     Source share  \$RestoreReq{shareSrc} 
     Destination host  \$RestoreReq{hostDest} 
     Destination share  \$RestoreReq{shareDest} 
     Start time  \$startTime 
     Duration  \$duration min 
     Number of files  \$Restores[\$i]{nFiles} 
     Total size  \${MB} Mo 
     Transfer rate  \$MBperSec Mo/sec 
     TarCreate errors  \$Restores[\$i]{tarCreateErrs} 
     Xfer errors  \$Restores[\$i]{xferErrs} 
     Xfer log file 
+View, 
+Erreurs
+
    
+
    
+\${h1("Liste Fichiers/Répertoires")}
+
    
+
+
+\$fileListStr
+
    Fichier/répertoire originalRestauré vers
    
+EOF
+
+
+# -----------------------------------
+$Lang{Email_Summary} = "BackupPC: Résumé du courrier électronique";
+
+# -----------------------------------
+#  !! ERROR messages !!
+# -----------------------------------
+
+$Lang{BackupPC__Lib__new_failed__check_apache_error_log} = "BackupPC::Lib->new a échoué: regardez le "
+    ."fichier error_log d\'apache\n";
+$Lang{Wrong_user__my_userid_is___} =  
+              "Mauvais utilisateur: mon userid est \$>, à la place de \$uid"
+            . "(\$Conf{BackupPCUser})\n";
+$Lang{Only_privileged_users_can_view_PC_summaries} = "Seuls les utilisateurs privilégiés peuvent "
+    . "voir les résumés des PC.";
+$Lang{Only_privileged_users_can_stop_or_start_backups} = 
+                  "Seuls les utilisateurs privilégiés peuvent arrêter ou démarrer des sauvegardes sur"
+		. " \${EscapeHTML(\$host)}.";
+$Lang{Invalid_number__num} = "Numéro invalide \$num";
+$Lang{Unable_to_open__file__configuration_problem} = "Impossible d\'ouvrir \$file: un problème de configuration ?";
+$Lang{Only_privileged_users_can_view_log_or_config_files} = "Seuls les utilisateurs privilégiés peuvent voir "
+    ."les log ou les fichiers de configuration.";
+$Lang{Only_privileged_users_can_view_log_files} = "Seuls les utilisateurs privilégiés peuvent voir les fichiers de log.";
+$Lang{Only_privileged_users_can_view_email_summaries} = "Seuls les utilisateurs privilégiés peuvent "
+    ."voir les compte-rendu des courriers électroniques.";
+$Lang{Only_privileged_users_can_browse_backup_files} = "Seuls les utilisateurs privilégiés peuvent parcourir "
+                . "les fichiers de sauvegarde pour l'hôte \${EscapeHTML(\$In{host})}.";
+$Lang{Empty_host_name} = "Nom d\'hôte vide.";
+$Lang{Can_t_browse_bad_directory_name} = "Ne peut pas parcourir " 
+	            . " \${EscapeHTML(\"\$TopDir/pc/\$host/\$num\")}:"
+                    . " mauvais nom de répertoire";
+$Lang{Directory___EscapeHTML} = "Le répertoire \${EscapeHTML(\"\$TopDir/pc/\$host/\$num\")}"
+		    . " est vide";
+$Lang{Can_t_browse_bad_directory_name2} = "Ne peut pas parcourir "
+	            . " \${EscapeHTML(\$fullDir)}:"
+                    . " mauvais nom de répertoire";
+$Lang{Only_privileged_users_can_restore_backup_files} = "Seuls les utilisateurs privilégiés peuvent restaurer "
+                . " des fichiers de sauvegarde"
+                . " pour l\'hôte \${EscapeHTML(\$In{host})}.";
+$Lang{Bad_host_name} = "Mauvais nom d\'hôte \${EscapeHTML(\$host)}";
+$Lang{You_haven_t_selected_any_files__please_go_Back_to} = "Vous n'avez sélectionné aucun fichier; "
+    . "vous pouvez revenir en arrière pour sélectionner des fichiers.";
+$Lang{Nice_try__but_you_can_t_put} = "Bien tenté, mais vous ne pouvez pas mettre \'..\' dans"
+                                   . " n\'importe quel nom de fichier.";
+$Lang{Can_t_fork_for_tar_restore} = "Ne peut pas se dupliquer (fork) pour la restauration par tar";
+$Lang{Can_t_fork_for_zip_restore} = "Ne peut pas se dupliquer (fork) pour la restauration par zip";
+$Lang{Host__doesn_t_exist} = "L'hôte \${EscapeHTML(\$In{hostDest})} n\'existe pas.";
+$Lang{You_don_t_have_permission_to_restore_onto_host} = "Vous n\'avez pas la permission de restaurer sur l\'hôte"
+		    . " \${EscapeHTML(\$In{hostDest})}";
+$Lang{Can_t_open_create} = "Ne peut pas ouvrir/créer "
+                    . "\${EscapeHTML(\"\$TopDir/pc/\$hostDest/\$reqFileName\")}";
+$Lang{Only_privileged_users_can_restore_backup_files2} = "Seuls les utilisateurs privilégiés peuvent restaurer"
+                . " des fichiers de sauvegarde"
+                . " pour l\'hôte \${EscapeHTML(\$host)}.";
+$Lang{Empty_host_name} = "Nom d\'hôte vide";
+$Lang{Can_t_restore_bad_file} = "Ne peut pas restaurer le fichier corrompu \${EscapeHTML(\$fullPath)}";
+$Lang{Unknown_host_or_user} = "\${EscapeHTML(\$host)}, hôte ou utilisateur inconnu.";
+$Lang{Only_privileged_users_can_view_information_about} = "Seuls les utilisateurs privilégiés peuvent accéder aux "
+                . " informations sur l\'hôte \${EscapeHTML(\$host)}." ;
+$Lang{Only_privileged_users_can_view_restore_information} = "Seuls les utilisateurs privilégiés peuvent restaurer "
+    ."des informations.";
+$Lang{Restore_number__num_for_host__does_not_exist} = "Restauration numéro \$num de l\'hôte \${EscapeHTML(\$host)} n\'"
+    . "existe pas";
+
+$Lang{Unable_to_connect_to_BackupPC_server} = "Impossible de se connecter au server BackupPC."
+          . "Ce script CGI (\$MyURL) ne peut pas se connecter au serveur  BackupPC"
+          . " sur \$Conf{ServerHost} via le port \$Conf{ServerPort}.  L\'erreur est la"
+          . " suivante: \$err.",
+            "Peut être BackupPC n\'a pas été lancé ou il y a une erreur "
+          . " de configuration. Vous pouvez faire suivre ce message à votre administrateur système.";
+
+$Lang{Can_t_find_IP_address_for} = "Ne peut pas trouver d\'adresse IP pour \${EscapeHTML(\$host)}";
+
+$Lang{host_is_a_DHCP_host} = <
+Tant que je ne verrai pas \$host à une adresse DHCP particulière, vous 
+ne pourrez démarrer cette requête que depuis la machine elle même.
+EOF
+
+
+# ------------------------------------
+# !! Server Mesg !!
+# ------------------------------------
+
+# Ne pas mélanger $reply et $str cf vers ligne: 248
+
+$Lang{Backup_requested_on_DHCP__host} = "Demande de sauvegarde sur l\'hôte \$host (\$In{hostIP}) par"
+		                      . " \$User depuis \$ENV{REMOTE_ADDR}";
+$Lang{Backup_requested_on__host_by__User} = "Sauvegarde demandée sur \$host par \$User";
+$Lang{Backup_stopped_dequeued_on__host_by__User} = "Sauvegarde Arrêtée/déprogrammée pour \$host par \$User";
+
+$Lang{log_Can_t_fork_for_tar_restore_request_by__User} = "log Ne peut pas se dupliquer (fork)"
+    . " pour la restauration tar demandée par \$User";
+$Lang{log_User__User_downloaded_tar_archive_for__host} = "log L\'utilisateur \$User a téléchargé "
+                           . "l\'archive tar pour \$host,"
+                           . " sauvegarde \$num; Les fichiers étaient: "
+			   . " \${join(\", \", \@fileListTrim)}";
+$Lang{log_Can_t_fork_for_zip_restore_request_by__User} = "log Ne peut pas se dupliquer (fork)"
+    . "pour la restauration zip demandée par \$User";
+$Lang{log_User__User_downloaded_zip_archive_for__host}= "log L\'utilisateur \$User a téléchargé "
+                           . "l\'archive zip pour \$host,"
+                           . " Sauvegarde \$num; Les fichiers étaient: "
+                           . "\${join(\", \", \@fileListTrim)}";
+$Lang{Restore_requested_to_host__hostDest__backup___num} = "Restauration demandée pour l\'hôte \$hostDest, "
+             . "sauvegarde n° \$num,"
+	     . " par \$User depuis \$ENV{REMOTE_ADDR}";
+
+##########################
+##########################
+
+#$Lang{backup__In_hostIP___host} = "Sauvegarde \$In{hostIP} \$host"
+#                                . " \$User \$doFull";
+#
+#$Lang{backup__host__host__User__doFull} = "backup \$host \$host \$User \$doFull";
+#$Lang{restore__ipAddr} = "Restauration \$ipAddr"
+#                       . " \$hostDest \$User \$reqFileName";
+#$Lang{stop__host__User__In_backoff} = "Arrêt \$host \$User \$In{backoff}";
+
+
+# -------------------------------------------------
+# ------- Stuff that was forgotten ----------------
+# -------------------------------------------------
+
+$Lang{Status} = "Status";
+$Lang{PC_Summary} = "Bilan du PC";
+$Lang{LOG_file} = "Fichier de LOG";
+$Lang{Old_LOGs} = "Vieux LOGs";
+$Lang{Email_summary} = "Résumé des emails";
+$Lang{Config_file} = "Fichier de configuration";
+$Lang{Hosts_file} = "Fichiers des hôtes";
+$Lang{Current_queues} = "Files actuelles";
+$Lang{Documentation} = "Documentation";
+
+$Lang{Host_or_User_name} = "Hôte ou Nom d\'utilisateur:";
+$Lang{Go} = "Chercher";
+$Lang{Hosts} = "Hôtes";
+
+$Lang{This_PC_has_never_been_backed_up} = "
     Ce PC n'a jamais été sauvegardé !! 
    \n";
+$Lang{This_PC_is_used_by} = "
  • Ce PC est utilisé par \${UserLink(\$user)}";
+
+# ------------
+$Lang{Last_email_sent_to__was_at___subject} = <Dernier email envoyé à \${UserLink(\$user)} le \$mailTime, avait comme sujet "\$subj".
+EOF
+# ------------
+$Lang{The_command_cmd_is_currently_running_for_started} = <La commande \$cmd s\'exécute actuellement sur \$host, démarrée le \$startTime.
+EOF
+
+# -----------
+$Lang{Host_host_is_queued_on_the_background_queue_will_be_backed_up_soon} = <L\'hôte \$host se trouve dans la liste d\'attente d\'arrière plan (sera sauvegardé bientôt).
+EOF
+
+# ----------
+$Lang{Host_host_is_queued_on_the_user_queue__will_be_backed_up_soon} = <L\'hôte \$host se trouve dans la liste d\'attente utilisateur (sera sauvegardé bientôt).
+EOF
+
+# ---------
+$Lang{A_command_for_host_is_on_the_command_queue_will_run_soon} = <Une commande pour l\'hôte \$host est dans la liste d\'attente des commandes (sera lancé bientôt).
+EOF
+
+# --------
+$Lang{Last_status_is_state_StatusHost_state_reason_as_of_startTime} = <L\'état courant est \"\$StatusHost{state}\"\$reason 
+    à compter du \$startTime.
+EOF
+
+# --------
+$Lang{Last_error_is____EscapeHTML_StatusHost_error} = <La dernière erreur est \"\${EscapeHTML(\$StatusHost{error})}\"
+EOF
+
+# ------
+$Lang{Pings_to_host_have_failed_StatusHost_deadCnt__consecutive_times} = <Les pings vers \$host ont échoués \$StatusHost{deadCnt} fois consécutives.
+EOF
+
+# -----
+$Lang{Prior_to_that__pings} = "Avant cela, pings";
+
+# -----
+$Lang{priorStr_to_host_have_succeeded_StatusHostaliveCnt_consecutive_times} = <Les \$priorStr vers \$host ont réussi \$StatusHost{aliveCnt} fois consécutives.
+EOF
+
+$Lang{Because__host_has_been_on_the_network_at_least__Conf_BlackoutGoodCnt_consecutive_times___} = <Du fait que \$host a été présent sur le réseau au moins \$Conf{BlackoutGoodCnt}
+fois consécutives, il ne sera pas sauvegardé de \$t0 à \$t1 pendant \$days.
+EOF
+
+$Lang{Backups_are_deferred_for_hours_hours_change_this_number} = <Les sauvegardes sont reportées pour \$hours heures
+(changer ce nombre).
+EOF
+
+$Lang{info_jobs_hosts_queueLen} = "info tâches hôtes queueLen";  # FIXME
+
+$Lang{tryIP} = " et \$StatusHost{dhcpHostIP}";
+
+$Lang{Host_Inhost} = "Hôte \$In{host}";
+
+$Lang{checkAll} = <
+ Tout sélectionner
+
+
+
+EOF
+
+$Lang{fileHeader} = < Nom
+        Type
+        Mode
+        Taille
+        Date modification
+    
+EOF
+
+$Lang{Home} = "Accueil";
+$Lang{Last_bad_XferLOG} = "Dernier bilan transmissions échouées";
+$Lang{Last_bad_XferLOG_errors_only} = "Dernier bilan transmissions échouées (erreurs seulement)";
+
+$Lang{This_display_is_merged_with_backup} = < Cet affichage est regroupé avec la sauvegarde n°\$numF, la plus récente copie intégrale.
+EOF
+
+$Lang{Restore_Summary} = <
+Cliquer sur le numéro de restauration pour plus de détails.
+
+
+    
+    
+    
+    
+    
+    
+    
+
+\$restoreStr
+
     Sauvegarde n°  Résultat  Date de départ Durée/mins Nb fichiers  Mo  Nb errs tar  Nb errs trans 
    
+
    
+EOF
+
+$Lang{BackupPC__Documentation} = "BackupPC: Documentation";
+
+$Lang{No} = "non";
+$Lang{Yes} = "oui";
+
+$Lang{The_directory_is_empty} = <Le repertoire \${EscapeHTML(\$dirDisplay)} est vide
+
+EOF
+
+$Lang{on} = "actif";
+$Lang{off} = "inactif";
+
+$Lang{full} = "complet";
+$Lang{incremental} = "incrémental";
+
+$Lang{failed} = "échec";
+$Lang{success} = "succès";
+$Lang{and} = "et";
+
+#end of lang_fr.pm
diff --git a/lib/BackupPC/Lib.pm b/lib/BackupPC/Lib.pm
index b77c778..02177a0 100644
--- a/lib/BackupPC/Lib.pm
+++ b/lib/BackupPC/Lib.pm
@@ -39,7 +39,7 @@ package BackupPC::Lib;
 
 use strict;
 
-use vars qw(%Conf);
+use vars qw(%Conf %Lang);
 use Fcntl qw/:flock/;
 use Carp;
 use DirHandle ();
@@ -54,8 +54,9 @@ sub new
     my $class = shift;
     my($topDir) = @_;
     my $self = bless {
-        TopDir  => $topDir || '__TOPDIR__',
-        BinDir  => '__INSTALLDIR__/bin',
+        TopDir  => $topDir || '/data/BackupPC',
+        BinDir  => '/usr/local/BackupPC/bin',
+        LibDir  => '/usr/local/BackupPC/lib',
         Version => '1.5.0',
         BackupFields => [qw(
                     num type startTime endTime
@@ -106,6 +107,12 @@ sub Conf
     return %{$self->{Conf}};
 }
 
+sub Lang
+{
+    my($self) = @_;
+    return $self->{Lang};
+}
+
 sub adminJob
 {
     return " admin ";
@@ -248,6 +255,14 @@ sub ConfigRead
         }
         %{$self->{Conf}} = ( %{$self->{Conf} || {}}, %Conf );
     }
+    my $langFile = "$self->{LibDir}/BackupPC/Lang/$self->{Conf}{Language}.pm";
+    if ( !defined($ret = do $langFile) && ($! || $@) ) {
+	$mesg = "Couldn't open language file $langFile: $!" if ( $! );
+	$mesg = "Couldn't execute language file $langFile: $@" if ( $@ );
+	$mesg =~ s/[\n\r]+//;
+	return $mesg;
+    }
+    $self->{Lang} = \%Lang;
     return;
 }
 
@@ -276,17 +291,19 @@ sub HostInfoRead
     if ( !open(HOST_INFO, "$self->{TopDir}/conf/hosts") ) {
         print(STDERR $self->timeStamp,
                      "Can't open $self->{TopDir}/conf/hosts\n");
-        return;
+        return {};
     }
     while (  ) {
         s/[\n\r]+//;
         s/#.*//;
+        s/\s+$//;
         next if ( /^\s*$/ || !/^([\w\.-]+\s+.*)/ );
         @fld = split(/\s+/, $1);
         if ( @hdr ) {
             if ( defined($host) ) {
                 next if ( lc($fld[0]) ne $host );
                 @{$hosts{lc($fld[0])}}{@hdr} = @fld;
+		close(HOST_INFO);
                 return \%hosts;
             } else {
                 @{$hosts{lc($fld[0])}}{@hdr} = @fld;
diff --git a/makeDist b/makeDist
index 96998e7..d4d5c81 100755
--- a/makeDist
+++ b/makeDist
@@ -30,6 +30,8 @@ my @PerlSrc = qw(
     lib/BackupPC/Attrib.pm
     lib/BackupPC/FileZIO.pm
     lib/BackupPC/Lib.pm
+    lib/BackupPC/Lang/en.pm
+    lib/BackupPC/Lang/fr.pm
     lib/BackupPC/PoolWrite.pm
     lib/BackupPC/Xfer/Smb.pm
     lib/BackupPC/Xfer/Tar.pm
-- 
2.20.1