# BRCM_VERSION=3
[bcm963xx.git] / kernel / linux / Documentation / isdn / README.fax
1
2 Fax with isdn4linux
3 ===================
4
5 When enabled during kernel configuration, the tty emulator
6 of the ISDN subsystem is capable of the Fax Class 2 commands.
7
8 This only makes sense under the following conditions :
9
10 - You need the commands as dummy, because you are using
11   hylafax (with patch) for AVM capi.
12 - You want to use the fax capabilities of your isdn-card.
13   (supported cards are listed below)
14
15
16 NOTE: This implementation does *not* support fax with passive
17       ISDN-cards (known as softfax). The low-level driver of
18       the ISDN-card and/or the card itself must support this.
19
20
21 Supported ISDN-Cards
22 --------------------
23
24 Eicon DIVA Server BRI/PCI
25         - full support with both B-channels.
26
27 Eicon DIVA Server 4BRI/PCI
28         - full support with all B-channels.
29
30 Eicon DIVA Server PRI/PCI
31         - full support on amount of B-channels
32                 depending on DSPs on board.
33
34
35
36 The command set is known as Class 2 (not Class 2.0) and
37 can be activated by AT+FCLASS=2
38
39
40 The interface between the link-level-module and the hardware-level driver
41 is described in the files INTERFACE.fax and INTERFACE.
42
43 Armin
44 mac@melware.de
45