#****************************************************************************
#
#  Copyright (c) 2001, 2002, 2003, 2004  Broadcom Corporation
#  All Rights Reserved
#  No portions of this material may be reproduced in any form without the
#  written permission of:
#          Broadcom Corporation
#          16251 Laguna Canyon Road
#          Irvine, California 92618
#  All information contained in this document is Broadcom Corporation
#  company private, proprietary, and trade secret.
#
#****************************************************************************

# Top-level Makefile for all commengine xDSL platforms

include version.make

BRCM_RELEASETAG=$(BRCM_VERSION).$(BRCM_RELEASE)L.$(BRCM_EXTRAVERSION)


###########################################
#
# Define Basic Variables
#
###########################################
BUILD_DIR = $(shell pwd)
KERNEL_VER = 2.6
ifeq ($(strip $(KERNEL_VER)),2.6)
INC_KERNEL_BASE = $(BUILD_DIR)/kernel
ORIGINAL_KERNEL = linuxmips.tar.bz2
endif
KERNEL_DIR = $(INC_KERNEL_BASE)/linux
BRCMDRIVERS_DIR = $(BUILD_DIR)/bcmdrivers
USERAPPS_DIR = $(BUILD_DIR)/userapps
LINUXDIR = $(INC_KERNEL_BASE)/linux
HOSTTOOLS_DIR = $(BUILD_DIR)/hostTools
IMAGES_DIR = $(BUILD_DIR)/images
TARGETS_DIR = $(BUILD_DIR)/targets
DEFAULTCFG_DIR = $(TARGETS_DIR)/defaultcfg
XCHANGE_DIR = $(BUILD_DIR)/xChange
FSSRC_DIR = $(TARGETS_DIR)/fs.src
BRCM_MODEL_NAME=$(PROFILE)
CONFIG_SHELL := $(shell if [ -x "$$BASH" ]; then echo $$BASH; \
          else if [ -x /bin/bash ]; then echo /bin/bash; \
          else echo sh; fi ; fi)
GENDEFCONFIG_CMD = $(HOSTTOOLS_DIR)/scripts/gendefconfig
RUN_NOISE=0



###########################################
#
# Import Build Profiles
#
###########################################
BRCM_BOARD=bcm963xx
LAST_PROFILE=$(shell find targets -name vmlinux | sed -e "s?targets/??" -e "s?/.*??" -e "q")
ifeq ($(strip $(PROFILE)),)
PROFILE=$(LAST_PROFILE)
export PROFILE
endif
ifneq ($(strip $(PROFILE)),)
include $(TARGETS_DIR)/$(PROFILE)/$(PROFILE)
export BRCM_CHIP
export BRCM_SDRAM_SIZE
export BRCM_FLASH_SIZE
export BRCM_FLASHPSI_SIZE
export BRCM_MODEL_NAME
export BRCM_DRIVER_WIRELESS_PCMCIA_DATASWAP BRCM_DRIVER_WIRELESS_EBI_DMA
export BRCM_DRIVER_USB BRCM_DRIVER_ETHERNET_CONFIG
export BRCM_KERNEL_NF_FIREWALL BRCM_KERNEL_NF_MANGLE BRCM_KERNEL_NF_NAT
export ODM_CFG_NO_BLOCK_DEVICE
endif


ifeq ($(strip $(PROFILE)),CL010)
CFE_FILE = $(TARGETS_DIR)/cfe/cfe6338_reset.bin
endif
ifeq ($(strip $(PROFILE)),CL010I)
CFE_FILE = $(TARGETS_DIR)/cfe/cfe6338_reset.bin
endif
ifeq ($(strip $(PROFILE)),CL040)
CFE_FILE = $(TARGETS_DIR)/cfe/cfe6338_reset.bin
endif
ifeq ($(strip $(PROFILE)),CL040I)
CFE_FILE = $(TARGETS_DIR)/cfe/cfe6338_reset.bin
endif
ifeq ($(strip $(PROFILE)),CL110)
CFE_FILE = $(TARGETS_DIR)/cfe/cfe6338_reset.bin
endif
ifeq ($(strip $(PROFILE)),CL110I)
CFE_FILE = $(TARGETS_DIR)/cfe/cfe6338_reset.bin
endif
ifeq ($(strip $(PROFILE)),SL2141)
CFE_FILE = $(TARGETS_DIR)/cfe/cfe6348_reset_16bitSDRAM.bin
endif
ifeq ($(strip $(PROFILE)),SL2141I)
CFE_FILE = $(TARGETS_DIR)/cfe/cfe6348_reset_16bitSDRAM.bin
endif
ifeq ($(strip $(PROFILE)),SLI5300_SIP_32M)
CFE_FILE = $(TARGETS_DIR)/cfe/cfe6348_reset_11g.bin
endif
ifeq ($(strip $(PROFILE)),SLI5300I_SIP_32M)
CFE_FILE = $(TARGETS_DIR)/cfe/cfe6348_reset_11g.bin
endif
###########################################
#
# Define Toolchain
#
###########################################
ifeq ($(strip $(BRCM_UCLIBC)),y)
NTC=1
ifeq ($(strip $(NTC)),1)
TOOLCHAIN=/opt/toolchains/uclibc-crosstools_gcc-3.4.2_uclibc-20050428
CROSS_COMPILE = $(TOOLCHAIN)/bin/mips-linux-uclibc-
else
TOOLCHAIN=/opt/toolchains/uclibc
CROSS_COMPILE = $(TOOLCHAIN)/bin/mips-uclibc-
endif
else
TOOLCHAIN=/usr/crossdev/mips
CROSS_COMPILE = $(TOOLCHAIN)/bin/mips-linux-
endif



AR              = $(CROSS_COMPILE)ar
AS              = $(CROSS_COMPILE)as
LD              = $(CROSS_COMPILE)ld
CC              = $(CROSS_COMPILE)gcc
CXX             = $(CROSS_COMPILE)g++
CPP             = $(CROSS_COMPILE)cpp
NM              = $(CROSS_COMPILE)nm
STRIP           = $(CROSS_COMPILE)strip
SSTRIP          = $(CROSS_COMPILE)sstrip
OBJCOPY         = $(CROSS_COMPILE)objcopy
OBJDUMP         = $(CROSS_COMPILE)objdump
RANLIB          = $(CROSS_COMPILE)ranlib

LIB_PATH        = $(TOOLCHAIN)/mips-linux/lib
LIBDIR          = $(TOOLCHAIN)/mips-linux/lib
LIBCDIR         = $(TOOLCHAIN)/mips-linux

###########################################
#
# Application-specific settings
#
###########################################
INSTALL_DIR = $(TARGETS_DIR)/fs.src
TARGET_FS = $(TARGETS_DIR)/$(PROFILE)/fs
TARGET_FS2 = $(TARGETS_DIR)/$(PROFILE)/fs2
PROFILE_DIR = $(TARGETS_DIR)/$(PROFILE)
PROFILE_PATH = $(TARGETS_DIR)/$(PROFILE)/$(PROFILE)
VENDOR_NAME = bcm
FS_KERNEL_IMAGE_NAME = $(VENDOR_NAME)$(PROFILE)_fs_kernel
CFE_FS_KERNEL_IMAGE_NAME = $(VENDOR_NAME)$(PROFILE)_cfe_fs_kernel
FLASH_IMAGE_NAME = $(VENDOR_NAME)$(PROFILE)_flash_image
INC_BRCMDRIVER_PUB_PATH=$(BRCMDRIVERS_DIR)/opensource/include
INC_BRCMDRIVER_PRIV_PATH=$(BRCMDRIVERS_DIR)/broadcom/include
INC_BRCMBOARDPARMS_PATH=$(TARGETS_DIR)/boardparms
INC_ENDPOINT_PATH=$(BRCMDRIVERS_DIR)/broadcom/char/endpoint/bcm9$(BRCM_CHIP)/inc
#INC_ADSLDRV_PATH=$(BRCMDRIVERS_DIR)/broadcom/char/adsl/bcm9$(BRCM_CHIP)
INC_ADSLDRV_PATH=$(BRCMDRIVERS_DIR)/broadcom/char/adsl/impl1
BROADCOM_CFM_DIR=$(BROADCOM_DIR)/cfm
INC_BRCMCFM_PATH=$(BROADCOM_CFM_DIR)/inc

# Michael: this save current config to default config should be enable for every model
export BRCM_CFG_XFER_TO_FACDEFLT=y

ifeq ($(strip $(BRCM_APP_PHONE)),sip)
export VOXXXLOAD=1
export VOIPLOAD=1
export SIPLOAD=1
export RVSIPLOAD=0
export ODM_ONLY_G729_G711A
export ODM_SIP_HASH2NUMBER
export ODM_RESERVE_OFF_HOOK
export ODM_PSTN_ONLY_PORT1_NO_FXO
export ODM_VOIP_NO_RELAY
export ODM_SWITCH_PORT1_PORT2
export BRCM_RETURN_ONE_CODEC
export ODM_IGNORE_FMTP_MAP
BRCM_RELEASETAG := $(BRCM_RELEASETAG).sip
endif

ifneq ($(findstring rvsip,$(BRCM_APP_PHONE)),)
export VOXXXLOAD=1
export VOIPLOAD=1
export SIPLOAD=0
export RVSIPLOAD=1
export ODM_ONLY_G729_G711A
export ODM_SIP_HASH2NUMBER
export SIP_SESSION_TIMER_ENABLE
export SIP_MIN_SE_ENABLE
export BBB_SPECIAL_FUNC_BY_PAD
export ODM_RESERVE_OFF_HOOK
export ODM_PSTN_ONLY_PORT1_NO_FXO
export ODM_VOIP_NO_RELAY
export ODM_SWITCH_PORT1_PORT2
export BRCM_RETURN_ONE_CODEC
export ODM_IGNORE_FMTP_MAP
BRCM_RELEASETAG := $(BRCM_RELEASETAG).sip
endif

ifeq ($(strip $(BRCM_APP_PHONE)),mgcp)
export VOXXXLOAD=1
export VOIPLOAD=1
export MGCPLOAD=1
export BRCM_HTTP_SECURITY_DIGEST
export BRCM_SUPPORT_BACKUP_CA
export BRCM_ENCRYPT_CA
export ODM_ONLY_G729_G711A
export ODM_SIP_HASH2NUMBER
export BBB_SPECIAL_FUNC_BY_PAD
export ODM_RESERVE_OFF_HOOK
export ODM_PSTN_ONLY_PORT1_NO_FXO
export ODM_SWITCH_PORT1_PORT2
export ODM_VOIP_NO_RELAY
export BRCM_RETURN_ONE_CODEC
export ODM_IGNORE_FMTP_MAP
export ODM_MGCP_AALN_ADD_ZERO
export BUILD_WAV2RTP
BRCM_RELEASETAG := $(BRCM_RELEASETAG).mgcp
endif

ifeq ($(strip $(BRCM_PROFILER_ENABLED)),y)
export BRCM_PROFILER_TOOL=1
else
export BRCM_PROFILER_TOOL=0
endif

ifneq ($(strip $(BUILD_VODSL)),)
export VOXXXLOAD=1
endif

ifeq ($(strip $(BRCM_VODSL_STUNC)),y)
	export BRCM_VODSL_STUN_CLIENT=1
endif

ifeq ($(strip $(BRCM_VODSL_CONFIG_MANAGER)),y)
	export BRCM_VODSL_CFGMGR=1
endif

BRCM_DSP_HAL := gw
BRCM_DSP_HAL_EXTENSION :=
XCHANGE_DSP_APP_EXTENSION :=
export XCHANGE_DSP_APP=$(BRCM_DSP_CODEC)

ifeq ($(strip $(BRCM_DSP_PCM)),y)
XCHANGE_DSP_APP := dspApp3341_tdm
BRCM_DSP_HAL_EXTENSION := _pcm
endif

ifeq ($(strip $(BRCM_DSP_HYBRID)),y)
XCHANGE_DSP_APP := dspApp3341_hybrid
BRCM_DSP_HAL_EXTENSION := _hybrid
endif

ifeq ($(strip $(BRCM_DSP_HYBRID_EXT)),y)
BRCM_DSP_HAL_EXTENSION := _hybrid
XCHANGE_DSP_APP := dspApp3341_hybrid
XCHANGE_DSP_APP_EXTENSION := _ext
endif

# APM application with FXO uses the hybrid HAL, as the FXO is provided by TDM port
ifeq ($(strip $(BRCM_DSP_APM_FXO)),y)
XCHANGE_DSP_APP := dspApp3341
BRCM_DSP_HAL_EXTENSION := _hybrid
XCHANGE_DSP_APP_EXTENSION := _fxo
endif

ifeq ($(strip $(BRCM_DSP_APM_FXO_EXT)),y)
XCHANGE_DSP_APP := dspApp3341
BRCM_DSP_HAL_EXTENSION := _hybrid
XCHANGE_DSP_APP_EXTENSION := _fxo_ext
endif

ifeq ($(strip $(BRCM_DSP_HYBRID_FXO)),y)
XCHANGE_DSP_APP := dspApp3341_hybrid
BRCM_DSP_HAL_EXTENSION := _hybrid
XCHANGE_DSP_APP_EXTENSION := _fxo
endif

ifeq ($(strip $(BRCM_DSP_HYBRID_FXO_EXT)),y)
XCHANGE_DSP_APP := dspApp3341_hybrid
BRCM_DSP_HAL_EXTENSION := _fxo
XCHANGE_DSP_APP_EXTENSION := _fxo_ext
endif

#
#  Warning here, we do re-assign some of the variables defined earlier:
#  BRCM_DSP_HAL and BRCM_DSP_HAL_EXTENSION for example, in order to pickup
#  the correct board HAL application.
#

#swda add,06/27/2005
ifeq ($(strip $(BRCM_SLIC_LE9502)),y)
export XCHANGE_BUILD_APP=Bcm$(BRCM_CHIP)_Le9502
BRCM_RELEASETAG := $(BRCM_RELEASETAG)._LE9502
BRCM_DSP_HAL := _Le9502
BRCM_DSP_HAL_EXTENSION :=
export BRCM_SLIC_LE9502
endif
#swda add end

ifeq ($(strip $(BRCM_DSP_FXO)),y)
ifeq ($(strip $(BRCM_SLIC_LE9502)),y)
export XCHANGE_BUILD_APP=Bcm$(BRCM_CHIP)_Le9502FXO
BRCM_RELEASETAG := $(BRCM_RELEASETAG)._LE9502
BRCM_DSP_HAL := _Le9502FXO
BRCM_DSP_HAL_EXTENSION :=
export BRCM_SLIC_LE9502
else
ifeq ($(strip $(BRCM_SLIC_LE9500)),y)
export XCHANGE_BUILD_APP=Bcm$(BRCM_CHIP)_Le9500FXO
BRCM_RELEASETAG := $(BRCM_RELEASETAG)._LE9500
BRCM_DSP_HAL := _Le9500FXO
BRCM_DSP_HAL_EXTENSION :=
export BRCM_SLIC_LE9500
endif
endif
endif


#
# DSP codec flags definition.  To be used throughout the application (for configuration and vodsl)
#

BRCM_DSP_CODEC_DEFINES := -DXCFG_G711_SUPPORT=1

ifeq ($(strip $(BRCM_DSP_CODEC_G723)),y)
BRCM_DSP_CODEC_DEFINES += -DXCFG_G7231_SUPPORT=1
endif

ifeq ($(strip $(BRCM_DSP_CODEC_G726)),y)
BRCM_DSP_CODEC_DEFINES += -DXCFG_G726_SUPPORT=1
endif

ifeq ($(strip $(BRCM_DSP_CODEC_G729)),y)
BRCM_DSP_CODEC_DEFINES += -DXCFG_G729_SUPPORT=1
endif

ifeq ($(strip $(BRCM_DSP_CODEC_G7xx)),y)
BRCM_DSP_CODEC_DEFINES += -DXCFG_G7231_SUPPORT=1
BRCM_DSP_CODEC_DEFINES += -DXCFG_G726_SUPPORT=1
BRCM_DSP_CODEC_DEFINES += -DXCFG_G729_SUPPORT=1
endif

ifeq ($(strip $(BRCM_DSP_PCM)),y)
BRCM_DSP_CODEC_DEFINES += -DXCFG_G729_SUPPORT=1
endif

ifeq ($(strip $(BRCM_DSP_HYBRID)),y)
BRCM_DSP_CODEC_DEFINES += -DXCFG_G729_SUPPORT=1
endif

ifeq ($(strip $(BRCM_DSP_HYBRID_EXT)),y)
BRCM_DSP_CODEC_DEFINES += -DXCFG_G7231_SUPPORT=1
BRCM_DSP_CODEC_DEFINES += -DXCFG_G726_SUPPORT=1
BRCM_DSP_CODEC_DEFINES += -DXCFG_G729_SUPPORT=1
endif

ifeq ($(strip $(BRCM_DSP_HYBRID_FXO_EXT)),y)
BRCM_DSP_CODEC_DEFINES += -DXCFG_G7231_SUPPORT=1
BRCM_DSP_CODEC_DEFINES += -DXCFG_G726_SUPPORT=1
BRCM_DSP_CODEC_DEFINES += -DXCFG_G729_SUPPORT=1
endif

ifeq ($(strip $(BRCM_DSP_IOM2_APM)),y)
BRCM_DSP_CODEC_DEFINES += -DXCFG_G729_SUPPORT=1
BRCM_DSP_CODEC_DEFINES += -DXCFG_G7231_SUPPORT=1
BRCM_DSP_CODEC_DEFINES += -DXCFG_G726_SUPPORT=1
BRCM_DSP_CODEC_DEFINES += -DXCFG_HYBRID_LOAD=1
endif

ifeq ($(strip $(BRCM_DSP_IOM2)),y)
BRCM_DSP_CODEC_DEFINES += -DXCFG_G729_SUPPORT=1
BRCM_DSP_CODEC_DEFINES += -DXCFG_G7231_SUPPORT=1
BRCM_DSP_CODEC_DEFINES += -DXCFG_G726_SUPPORT=1
endif

ifeq ($(strip $(BRCM_DSP_CODEC_T38_EXT)),y)
BRCM_DSP_CODEC_DEFINES += -DXCFG_G726_SUPPORT=1
BRCM_DSP_CODEC_DEFINES += -DXCFG_G729_SUPPORT=1
BRCM_DSP_CODEC_DEFINES += -DXCFG_FAX_SUPPORT=1
endif

ifeq ($(strip $(BRCM_DSP_CODEC_T38_INT)),y)
BRCM_DSP_CODEC_DEFINES += -DXCFG_FAX_SUPPORT=1
endif

ifeq ($(strip $(BRCM_DSP_APM_FXO_EXT)),y)
BRCM_DSP_CODEC_DEFINES += -DXCFG_G729_SUPPORT=1
BRCM_DSP_CODEC_DEFINES += -DXCFG_G7231_SUPPORT=1
BRCM_DSP_CODEC_DEFINES += -DXCFG_G726_SUPPORT=1
endif

ifeq ($(strip $(BRCM_DSP_APM_FXO)),y)
BRCM_DSP_CODEC_DEFINES += -DXCFG_G729_SUPPORT=1
endif

ifeq ($(strip $(BRCM_DSP_HYBRID_FXO_EXT)),y)
BRCM_DSP_CODEC_DEFINES += -DXCFG_G729_SUPPORT=1
BRCM_DSP_CODEC_DEFINES += -DXCFG_G7231_SUPPORT=1
BRCM_DSP_CODEC_DEFINES += -DXCFG_G726_SUPPORT=1
endif

ifeq ($(strip $(BRCM_DSP_HYBRID_FXO)),y)
BRCM_DSP_CODEC_DEFINES += -DXCFG_G729_SUPPORT=1
BRCM_DSP_CODEC_DEFINES += -DXCFG_G7231_SUPPORT=1
BRCM_DSP_CODEC_DEFINES += -DXCFG_G726_SUPPORT=1
endif


#
#  Definition of the number of voice channels supported based on the specific
#  application being created.
#

ifeq ($(strip $(BRCM_DSP_HYBRID)), y)
BRCM_DSP_CHAN_DEFINES = -DNUM_APM_VOICE_CHANNELS=2 -DNUM_TDM_VOICE_CHANNELS=1 -DNUM_FXO_CHANNELS=0
else
ifeq ($(strip $(BRCM_DSP_HYBRID_EXT)), y)
BRCM_DSP_CHAN_DEFINES = -DNUM_APM_VOICE_CHANNELS=2 -DNUM_TDM_VOICE_CHANNELS=1 -DNUM_FXO_CHANNELS=0
else
ifeq ($(strip $(BRCM_DSP_APM_FXO)), y)
BRCM_DSP_CHAN_DEFINES = -DNUM_APM_VOICE_CHANNELS=2 -DNUM_TDM_VOICE_CHANNELS=0 -DNUM_FXO_CHANNELS=1
else
ifeq ($(strip $(BRCM_DSP_APM_FXO_EXT)), y)
BRCM_DSP_CHAN_DEFINES = -DNUM_APM_VOICE_CHANNELS=2 -DNUM_TDM_VOICE_CHANNELS=0 -DNUM_FXO_CHANNELS=1
else
ifeq ($(strip $(BRCM_DSP_HYBRID_FXO)), y)
BRCM_DSP_CHAN_DEFINES = -DNUM_APM_VOICE_CHANNELS=2 -DNUM_TDM_VOICE_CHANNELS=1 -DNUM_FXO_CHANNELS=1
else
ifeq ($(strip $(BRCM_DSP_HYBRID_FXO_EXT)), y)
BRCM_DSP_CHAN_DEFINES = -DNUM_APM_VOICE_CHANNELS=2 -DNUM_TDM_VOICE_CHANNELS=1 -DNUM_FXO_CHANNELS=1
else
BRCM_DSP_CHAN_DEFINES = -DNUM_APM_VOICE_CHANNELS=0 -DNUM_TDM_VOICE_CHANNELS=0 -DNUM_FXO_CHANNELS=0
endif
endif
endif
endif
endif
endif

export BRCM_DSP_CODEC_DEFINES
export BRCM_DSP_CHAN_DEFINES
export BRCM_DSP_FXO
export XCHANGE_BUILD_APP=Bcm$(BRCM_CHIP)$(BRCM_DSP_HAL)$(BRCM_DSP_HAL_EXTENSION)
export XCHANGE_DSP_APP_EXTENSION
export BRCM_DSP_HAL_EXTENSION
BRCM_RELEASETAG := $(BRCM_RELEASETAG).$(XCHANGE_DSP_APP)

# If no codec is selected, build G.711 load.
# Any XCHANGE_BUILD_APP directory would be OK
# because G.711 is included with all the voice DSP images.
ifneq ($(strip $(BUILD_VODSL)),)
ifeq ($(strip $(XCHANGE_DSP_APP)),)
export XCHANGE_BUILD_APP=Bcm$(BRCM_CHIP)gw
export XCHANGE_DSP_APP=g711
BRCM_RELEASETAG := $(BRCM_RELEASETAG).g711
endif
endif
                                                                                
ifeq ($(strip $(BRCM_MIPS_ONLY_BUILD)),y)
export XCHANGE_BUILD_APP=Bcm$(BRCM_CHIP)lv
BRCM_DSP_HAL := lv
BRCM_DSP_HAL_EXTENSION :=
XCHANGE_DSP_APP_EXTENSION=
endif
                                                                                
ifeq ($(strip $(BRCM_VODSL_DUAL_3341)),y)
BRCM_RELEASETAG := $(BRCM_RELEASETAG).dual3341
endif
                                                                                
#Set up ADSL standard
export ADSL=$(BRCM_ADSL_STANDARD)

#swda add,04/07/2005
#Set up ADSL supporting line modes
export BRCM_DSL_MODE_GDMT
export BRCM_DSL_MODE_GLITE
export BRCM_DSL_MODE_T1413
export BRCM_DSL_MODE_ADSL2
export BRCM_DSL_MODE_READSL2
export BRCM_DSL_MODE_ADSL2PLUS
export BRCM_DSL_MODE_ANNEXM
export BRCM_DSL_MODE_BITSWAP
export BRCM_DSL_MODE_SRA

#Set up ADSL version
export ADSL_VERSION=$(BRCM_ADSL_VERSION)

export DSL_START_IN_KERNEL
export WAN_LED_BLINKING
export CHT_PPP_AS_WAN_LED
export ODM_PPP_AS_PSTN_LED
export ODM_PSTN_LED
export Comtest_Lab_Only
export Impulse_Test_Telestra_Approval
export POWER_SAVING_DG
export CHT_OAM_RES_WAIT_TIME_6
export CHT_EOC
export CHANGE_ADSL_OEM_EOC_VERSION
export MODEL_NAME_EOC

export DEFAULT_WLAN_SSID=$(BRCM_Default_WLAN_SSID)
export BRCM_BACKUP_SPROM_4306
export DEFAULT_WLAN_WEP128
export DEFAULT_WLAN_FRAMEBURST
export DEFAULT_WLAN_AFTERBURNER
export WIRELESS_MAIN_ANTENNA
export COUNTRY_ISRAEL
export WLAN_ENABLE_CTRL_BUTTON
export WLAN_DISABLE_FEM
export SERIAL_NUMBER
export AAA_TEST_LED
export WESTELL_GPIO
export BBB_AAA_INTERNET_LED
export DAA_OFFHOOK_CMD
export CONFIG_ATM_EOP_MONITORING
export UK_BBB_440_523_Dialtone_Stutterdial
export VOICE_SYS_CLOCK_50MHZ
export NEWZEALAND_FXO
export VOICECTL_APP
export FXO_GAIN_CMD
#swda add end

#michael add
#Use chipId to decide what the ADSL config option on html
export CHIP_ADSL_VERSION=$(BRCM_ADSL_DRIVER)

#Set up ADSL_PHY_MODE  {file | obj}
ifeq ($(DSL_START_IN_KERNEL),y)
export ADSL_PHY_MODE=obj
else
export ADSL_PHY_MODE=file
endif

#Set up ADSL_SELF_TEST
export ADSL_SELF_TEST=$(BRCM_ADSL_SELF_TEST)

###########################################
#
# Complete list of applications
#
###########################################
export OPENSOURCE_DIR=$(USERAPPS_DIR)/opensource
SUBDIRS_OPENSOURCE = $(OPENSOURCE_DIR)/atm2684/pvc2684ctl \
        $(OPENSOURCE_DIR)/bridge-utils \
        $(OPENSOURCE_DIR)/ppp/pppoe \
        $(OPENSOURCE_DIR)/udhcp \
        $(OPENSOURCE_DIR)/iptables \
        $(OPENSOURCE_DIR)/ebtables \
        $(OPENSOURCE_DIR)/reaim  \
        $(OPENSOURCE_DIR)/iproute2  \
        $(OPENSOURCE_DIR)/gdbserver  \
        $(OPENSOURCE_DIR)/libosip2 \
        $(OPENSOURCE_DIR)/siproxd \
        $(OPENSOURCE_DIR)/zebra  \
        $(OPENSOURCE_DIR)/net-snmp  \
        $(OPENSOURCE_DIR)/ftpd \
        $(OPENSOURCE_DIR)/libcreduction \
        $(OPENSOURCE_DIR)/busybox \
        $(OPENSOURCE_DIR)/dproxy \
		$(OPENSOURCE_DIR)/httpc	\
		$(OPENSOURCE_DIR)/mpd

#In future, we need to add soap when it
#is decoupled from cli

# Andy porting from 2.21.5, 2005/04/14
export BROADCOM_DIR=$(USERAPPS_DIR)/broadcom
NEED_MOVE = "1"
NEED_CHG_ACCESSREMOTE = "0"
ifneq ($(strip $(BRCM_LANG_EN)),)
	NEED_CHG_ACCESSREMOTE = "1"
endif
	HTML_DIR = $(BROADCOM_DIR)/cfm/html
	NEED_MOVE = "0"

NEED_MOVE_CH = "0"

export HTML_DIR NEED_MOVE NEED_CHG_ACCESSREMOTE NEED_MOVE_CH
export	LOGO_DIR = $(BROADCOM_DIR)/cfm/logo
export  WEB_LOGO_CHOICE = $(BRCM_WEB_LOGO_CHOICE)
# End Andy porting, 2005/04/14

export BROADCOM_DIR=$(USERAPPS_DIR)/broadcom
SUBDIRS_BROADCOM = $(BROADCOM_DIR)/cfm \
	$(BROADCOM_DIR)/upnp/router/upnp \
	$(BROADCOM_DIR)/nas \
	$(BROADCOM_DIR)/wlctl \
	$(BROADCOM_DIR)/wlenablectrl \
	$(BROADCOM_DIR)/voicectl \
	$(BROADCOM_DIR)/atmctl \
	$(BROADCOM_DIR)/adslctl \
	$(BROADCOM_DIR)/netctl \
	$(BROADCOM_DIR)/igmp \
	$(BROADCOM_DIR)/dhcpr \
	$(BROADCOM_DIR)/sntp \
	$(BROADCOM_DIR)/ddnsd \
	$(BROADCOM_DIR)/ethctl \
	$(BROADCOM_DIR)/hotplug \
	$(BROADCOM_DIR)/epittcp \
	$(BROADCOM_DIR)/snmp

SUBDIRS_APP = $(SUBDIRS_BROADCOM) $(SUBDIRS_OPENSOURCE)
SUBDIRS = $(foreach dir, $(SUBDIRS_APP), $(shell if [ -d "$(dir)" ]; then echo $(dir); fi))

OPENSOURCE_APPS = pvc2684ctl pvc2684d brctl pppd udhcp iptables ebtables httpc mpd \
                  reaim libosip2 siproxd snmp zebra bftpd busybox dproxy iproute2 gdbserver

BROADCOM_APPS = cfm  upnp nas wlctl wlenablectrl voicectl atmctl adslctl netctl\
                igmp dhcpr diagapp sntp ddnsd ilmi hotplug ethctl epittcp

ifneq ($(findstring rvsip,$(BRCM_APP_PHONE)),)
    SUBDIRS_BROADCOM += $(BROADCOM_DIR)/rvsip
    BROADCOM_APPS += rvsip
else
  ifneq ($(strip $(BUILD_VODSL)),)
    SUBDIRS_BROADCOM += $(BROADCOM_DIR)/vodsl
    BROADCOM_APPS += vodsl
  endif
endif

ifneq ($(strip $(BUILD_SIGNATURE)),)
   export BUILD_SIGNATURE
endif

ifneq ($(strip $(BUILD_SIGNATURE_RSA)),)
   export BUILD_SIGNATURE_RSA
endif

LIBC_OPTIMIZATION = libcreduction

ifneq ($(strip $(BUILD_PPP_AUTH_LIMIT)),)
   export BUILD_PPP_AUTH_LIMIT
endif

ifneq ($(strip $(ODM_MULTI_LANG)),)
ifneq ($(strip $(MULTI_LANG_EN)),)
  export MULTI_LANG_EN=y
endif
ifneq ($(strip $(MULTI_LANG_DE)),)
  export MULTI_LANG_DE=y
endif
ifneq ($(strip $(MULTI_LANG_TR)),)
  export MULTI_LANG_TR=y
endif
endif

BUSYBOX_DIR = $(OPENSOURCE_DIR)/busybox

BRCMAPPS = $(BROADCOM_APPS) $(OPENSOURCE_APPS) $(LIBC_OPTIMIZATION)

all: sanity_check profile_check kernelbuild modbuild app hosttools buildimage

menuconfig:
	@cd $(INC_KERNEL_BASE); \
	if [ ! -e linux/CREDITS ]; then \
	  echo Untarring original Linux kernel source...; \
	  (tar xkfj $(ORIGINAL_KERNEL) 2> /dev/null || true); \
	fi
	$(MAKE) -C $(KERNEL_DIR)/scripts/lxdialog HOSTCC=gcc
	$(CONFIG_SHELL) $(HOSTTOOLS_DIR)/scripts/Menuconfig $(TARGETS_DIR)/config.in

sanity_check:
	@if [ "$(PROFILE)" = "" ]; then \
          echo You need to specify build profile name from $(TARGETS_DIR) using 'make PROFILE=<profile name>...'; exit 1; \
	fi

profile_check:
	@if [ "$(LAST_PROFILE)" != "" ] && [ "$(LAST_PROFILE)" != "$(PROFILE)" ]; then \
		echo "The specified profile, $(PROFILE), differs from the last one built, $(LAST_PROFILE)."; \
		echo "The entire image must be rebuilt."; \
		read -p "Press ENTER to rebuild the entire image or CTRL-C to abort. " ; \
		$(MAKE) PROFILE=$(LAST_PROFILE) clean; \
		$(MAKE) PROFILE=$(PROFILE); \
		echo "Ignore the make exit error, Error 1"; \
		exit 1; \
	fi

$(KERNEL_DIR)/vmlinux:
	$(GENDEFCONFIG_CMD) $(PROFILE_PATH)
	cd $(KERNEL_DIR); \
	cp -f $(KERNEL_DIR)/arch/mips/defconfig $(KERNEL_DIR)/.config; \
	$(MAKE) oldconfig; $(MAKE); $(MAKE) modules_install

kernelbuild:
ifeq ($(wildcard $(KERNEL_DIR)/vmlinux),)
	@cd $(INC_KERNEL_BASE); \
	if [ ! -e linux/CREDITS ]; then \
	  echo Untarring original Linux kernel source...; \
	  (tar xkfj $(ORIGINAL_KERNEL) 2> /dev/null || true); \
	fi
	$(GENDEFCONFIG_CMD) $(PROFILE_PATH)
	cd $(KERNEL_DIR); \
	cp -f $(KERNEL_DIR)/arch/mips/defconfig $(KERNEL_DIR)/.config; \
	$(MAKE) oldconfig; $(MAKE)
else
	cd $(KERNEL_DIR); $(MAKE)
endif

kernel: profile_check kernelbuild hosttools buildimage

ifeq ($(strip $(VOXXXLOAD)),1)
modbuild: touch_voice_files
	cd $(KERNEL_DIR); $(MAKE) modules && $(MAKE) modules_install
else
modbuild:
	cd $(KERNEL_DIR); $(MAKE) modules && $(MAKE) modules_install
endif

modules: profile_check modbuild hosttools buildimage

app: profile_check prebuild $(BRCMAPPS) hosttools buildimage

prebuild:
	mkdir -p $(INSTALL_DIR)/bin $(INSTALL_DIR)/lib

# touch_voice_files doesn't clean up voice, just enables incremental build of voice code
touch_voice_files:
	find bcmdrivers/broadcom/char/endpoint/ \( -name '*.o' -o -name '*.a' -o -name '*.lib' -o -name '*.ko' -o -name '*.cmd' -o -name '.*.cmd' -o -name '*.c' -o -name '*.mod' \) -print -exec rm -f "{}" ";"
	rm -rf kernel/linux/.tmp_versions/endpointdd.mod
	rm -rf kernel/linux/arch/mips/defconfig
	rm -rf kernel/linux/include/config/bcm/endpoint/
	rm -rf kernel/linux/include/asm-mips/offset.h
	rm -rf kernel/linux/include/asm-mips/reg.h
	find kernel/linux/lib/ -name '*.o' -print -exec rm -f "{}" ";"
	find kernel/linux/lib/ -name '*.lib' -print -exec rm -f "{}" ";"

# Build user applications depending on if they are
# specified in the profile
ifneq ($(strip $(BUILD_PVC2684CTL)),)
export BUILD_PVC2684D=$(BUILD_PVC2684CTL)
pvc2684d:
pvc2684ctl:
	$(MAKE) -C $(OPENSOURCE_DIR)/atm2684/pvc2684ctl $(BUILD_PVC2684CTL)
else
pvc2684ctl:
endif

ifneq ($(strip $(BUILD_BRCTL)),)
brctl:
	cd $(OPENSOURCE_DIR);   (tar xkfj bridge-utils.tar.bz2 2> /dev/null || true)
	$(MAKE) -C $(OPENSOURCE_DIR)/bridge-utils $(BUILD_BRCTL)
else
brctl:
endif

ifneq ($(strip $(BUILD_VCONFIG)),)
export BUILD_VCONFIG=y
endif

ifneq ($(strip $(BUILD_CFM)),)

ifneq ($(strip $(BUILD_CFM_MENU)),)
export BUILD_CFM_MENU=y
endif

cfm:
ifneq ($(strip $(BUILD_SIGNATURE_RSA)),)
	$(MAKE) -C $(BROADCOM_DIR)/cfm/web/sigmak
endif
	$(MAKE) -C $(BROADCOM_DIR)/cfm $(BUILD_CFM)
else
cfm:
endif

# iptables is dependent on kernel netfilter modules
ifneq ($(strip $(BRCM_KERNEL_NETFILTER)),)
ifneq ($(strip $(BUILD_IPTABLES)),)
iptables:
	cd $(OPENSOURCE_DIR);   (tar xkfj iptables.tar.bz2 2> /dev/null || true)
	$(MAKE) -C $(OPENSOURCE_DIR)/iptables $(BUILD_IPTABLES)
iptables-build:
	cd $(OPENSOURCE_DIR);   (tar xkfj iptables.tar.bz2 2> /dev/null || true)
	$(MAKE) -C $(OPENSOURCE_DIR)/iptables static
else
iptables:
endif
else
iptables:
	@echo Warning: You need to enable netfilter in the kernel !!!!!
endif

ifneq ($(strip $(BUILD_EBTABLES)),)
ebtables:
	cd $(OPENSOURCE_DIR);   (tar xkfj ebtables.tar.bz2 2> /dev/null || true)
	$(MAKE) -C $(OPENSOURCE_DIR)/ebtables $(BUILD_EBTABLES)
else
ebtables:
endif

ifneq ($(strip $(BUILD_PPPD)),)
pppd:
	$(MAKE) -C $(OPENSOURCE_DIR)/ppp/pppoe $(BUILD_PPPD)
else
pppd:
endif

ifneq ($(strip $(BUILD_REAIM)),)
reaim:
	cd $(OPENSOURCE_DIR);   (tar xkfj reaim.tar.bz2 2> /dev/null || true)
	$(MAKE) -C $(OPENSOURCE_DIR)/reaim $(BUILD_REAIM)
else
reaim:
endif

ifneq ($(strip $(BRCM_KERNEL_NETQOS)),)
iproute2:
	cd $(OPENSOURCE_DIR);   (tar xkfj iproute2.tar.bz2 2> /dev/null || true)
	$(MAKE) -C $(OPENSOURCE_DIR)/iproute2 dynamic
else

ifneq ($(strip $(BRCM_KERNEL_DN_IPQOS)),)
iproute2:
	cd $(OPENSOURCE_DIR);   (tar xkfj iproute2.tar.bz2 2> /dev/null || true)
	$(MAKE) -C $(OPENSOURCE_DIR)/iproute2 dynamic
else

ifneq ($(strip $(BUILD_POLICY_ROUTING)),)
iproute2:
	cd $(OPENSOURCE_DIR);   (tar xkfj iproute2.tar.bz2 2> /dev/null || true)
	$(MAKE) -C $(OPENSOURCE_DIR)/iproute2 dynamic
else
iproute2:
endif#BUILD_POLICY_ROUTING

endif#BRCM_KERNEL_DN_IPQOS

endif#BRCM_KERNEL_NETQOS

ifneq ($(strip $(BUILD_GDBSERVER)),)
gdbserver:
	install -m 755 $(TOOLCHAIN)/mips-linux-uclibc/target-apps/usr/bin/gdbserver $(INSTALL_DIR)/bin 
	$(STRIP) $(INSTALL_DIR)/bin/gdbserver
else
gdbserver:
endif

ifneq ($(strip $(BUILD_ETHWAN)),)
export BUILD_ETHWAN=y
endif

ifneq ($(strip $(BUILD_UDHCP)),)
udhcp:
	$(MAKE) -C $(OPENSOURCE_DIR)/udhcp $(BUILD_UDHCP)
else
udhcp:
endif

# UPNP is dependent on iptables
ifneq ($(strip $(BUILD_IPTABLES)),)
ifneq ($(strip $(BUILD_UPNP)),)
upnp: iptables-build
	$(MAKE) -C $(BROADCOM_DIR)/upnp/router/upnp  $(BUILD_UPNP)
else
upnp:
endif
else
upnp:
	@echo Warning: You need to build iptables first !!!!!
endif


ifneq ($(strip $(BUILD_SIPROXD)),)
siproxd:
	cd $(OPENSOURCE_DIR);   (tar xkfj siproxd.tar.bz2 2> /dev/null || true)
	$(MAKE) -C $(OPENSOURCE_DIR)/siproxd $(BUILD_SIPROXD)
libosip2:
	cd $(OPENSOURCE_DIR);   (tar xkfj libosip2.tar.bz2 2> /dev/null || true)
	$(MAKE) -C $(OPENSOURCE_DIR)/libosip2
else
siproxd:
libosip2:
endif

ifneq ($(strip $(BUILD_SNMP)),)

ifneq ($(strip $(BUILD_SNMP_SET)),)
export BUILD_SNMP_SET=1
else
export BUILD_SNMP_SET=0
endif

ifneq ($(strip $(BUILD_SNMP_ADSL_MIB)),)
export BUILD_SNMP_ADSL_MIB=1
else
export BUILD_SNMP_ADSL_MIB=0
endif

ifneq ($(strip $(BUILD_SNMP_ATM_MIB)),)
export BUILD_SNMP_ATM_MIB=1
else
export BUILD_SNMP_ATM_MIB=0
endif

ifneq ($(strip $(BUILD_SNMP_AT_MIB)),)
export BUILD_SNMP_AT_MIB=1
else
export BUILD_SNMP_AT_MIB=0
endif

ifneq ($(strip $(BUILD_SNMP_SYSOR_MIB)),)
export BUILD_SNMP_SYSOR_MIB=1
else
export BUILD_SNMP_SYSOR_MIB=0
endif

ifneq ($(strip $(BUILD_SNMP_TCP_MIB)),)
export BUILD_SNMP_TCP_MIB=1
else
export BUILD_SNMP_TCP_MIB=0
endif

ifneq ($(strip $(BUILD_SNMP_UDP_MIB)),)
export BUILD_SNMP_UDP_MIB=1
else
export BUILD_SNMP_UDP_MIB=0
endif

ifneq ($(strip $(BUILD_SNMP_IP_MIB)),)
export BUILD_SNMP_IP_MIB=1
else
export BUILD_SNMP_IP_MIB=0
endif

ifneq ($(strip $(BUILD_SNMP_ICMP_MIB)),)
export BUILD_SNMP_ICMP_MIB=1
else
export BUILD_SNMP_ICMP_MIB=0
endif

ifneq ($(strip $(BUILD_SNMP_SNMP_MIB)),)
export BUILD_SNMP_SNMP_MIB=1
else
export BUILD_SNMP_SNMP_MIB=0
endif

ifneq ($(strip $(BUILD_SNMP_ATMFORUM_MIB)),)
export BUILD_SNMP_ATMFORUM_MIB=1
else
export BUILD_SNMP_ATMFORUM_MIB=0
endif

ifneq ($(strip $(BRCM_SNMP)),)
export BUILD_SNMP_CHINA_TELECOM_CPE_MIB=0
endif

snmp:
ifneq ($(strip $(BRCM_SNMP)),)
##	$(MAKE) -C $(BROADCOM_DIR)/snmp $(BUILD_SNMP)
else
	cd $(OPENSOURCE_DIR);   (tar xkfj net-snmp.tar.bz2 2> /dev/null || true)
	$(MAKE) -C $(OPENSOURCE_DIR)/net-snmp $(BUILD_SNMP)
endif
else
snmp:
endif

ifneq ($(strip $(BUILD_ILMI)),)
ilmi:
	cd $(OPENSOURCE_DIR);   (tar xkfj net-snmp.tar.bz2 2> /dev/null || true)
	$(MAKE) -C $(BROADCOM_DIR)/ilmi $(BUILD_ILMI)
else
ilmi:
endif

ifneq ($(findstring rvsip,$(BRCM_APP_PHONE)),)
rvsip:
	$(MAKE) -C $(BROADCOM_DIR)/rvsip all install
else
vodsl:
  ifneq ($(strip $(BUILD_VODSL)),)
	$(MAKE) -C $(BROADCOM_DIR)/vodsl $(BUILD_VODSL)
  endif
endif

# Leave it for the future when soap server is decoupled from cfm
ifneq ($(strip $(BUILD_SOAP)),)
ifeq ($(strip $(BUILD_SOAP_VER)),2)
soapserver:
	$(MAKE) -C $(BROADCOM_DIR)/SoapToolkit/SoapServer $(BUILD_SOAP)
else
soap:
	$(MAKE) -C $(BROADCOM_DIR)/soap $(BUILD_SOAP)
endif
else
soap:
endif

ifneq ($(strip $(BUILD_NAS)),)
export WIRELESS=1
nas:
	$(MAKE) -C $(BROADCOM_DIR)/nas $(BUILD_NAS)

#add hotplug here, for nas use only
hotplug:
	$(MAKE) -C $(BROADCOM_DIR)/hotplug $(BUILD_NAS)
	
else
export WIRELESS=0
nas:
#add hotplug here, for nas use only
hotplug:
endif

ifneq ($(strip $(BUILD_WLCTL)),)
export WIRELESS=1
wlctl:
	$(MAKE) -C $(BROADCOM_DIR)/wlctl $(BUILD_WLCTL)
else
export WIRELESS=0
wlctl:
endif

ifneq ($(strip $(WLAN_ENABLE_CTRL_BUTTON)),)
wlenablectrl:
	$(MAKE) -C $(BROADCOM_DIR)/wlenablectrl dynamic
else
wlenablectrl:
endif

ifneq ($(strip $(VOICECTL_APP)),)
voicectl:
	$(MAKE) -C $(BROADCOM_DIR)/voicectl dynamic
else
voicectl:
endif

#Always compile Ethernet control utility
ethctl:
	$(MAKE) -C $(BROADCOM_DIR)/ethctl dynamic

ifneq ($(strip $(BUILD_IGMP)),)
igmp:
	$(MAKE) -C $(BROADCOM_DIR)/igmp $(BUILD_IGMP)
else
igmp:
endif

ifneq ($(strip $(BUILD_DHCPR)),)
dhcpr:
	$(MAKE) -C $(BROADCOM_DIR)/dhcpr $(BUILD_DHCPR)
else
dhcpr:
endif

ifneq ($(strip $(BUILD_ZEBRA)),)
zebra:
	cd $(OPENSOURCE_DIR);   (tar xkfj zebra.tar.bz2 2> /dev/null || true)
	$(MAKE) -C $(OPENSOURCE_DIR)/zebra $(BUILD_ZEBRA)
else
zebra:
endif

ifneq ($(strip $(BUILD_ATMCTL)),)
atmctl:
	$(MAKE) -C $(BROADCOM_DIR)/atmctl $(BUILD_ATMCTL)
else
atmctl:
endif

ifneq ($(strip $(BUILD_ADSLCTL)),)
adslctl:
	$(MAKE) -C $(BROADCOM_DIR)/adslctl $(BUILD_ADSLCTL)
else
adslctl:
endif

ifeq ($(strip $(BUILD_CFM_CLI)),y)
ifneq ($(strip $(BUILD_NETCTL)),)
netctl:
	$(MAKE) -C $(BROADCOM_DIR)/netctl $(BUILD_NETCTL)
else
netctl:
endif
else
netctl:
endif

ifneq ($(strip $(BUILD_BUSYBOX)),)
busybox:
	cd $(OPENSOURCE_DIR); (tar xkfj busybox.tar.bz2 2> /dev/null || true)
#	$(MAKE) -C $(OPENSOURCE_DIR)/busybox $(BUILD_BUSYBOX)
	cd $(OPENSOURCE_DIR)/busybox; cp -f brcm.config .config
	$(MAKE) -C $(OPENSOURCE_DIR)/busybox install
else
busybox:
endif

ifneq ($(strip $(BUILD_LIBCREDUCTION)),)
libcreduction:
	$(MAKE) -C $(OPENSOURCE_DIR)/libcreduction install
else
libcreduction:
endif

ifneq ($(strip $(BUILD_DIAGAPP)),)
diagapp:
	$(MAKE) -C $(BROADCOM_DIR)/diagapp $(BUILD_DIAGAPP)
else
diagapp:
endif

ifneq ($(strip $(BUILD_FTPD)),)
bftpd:
	cd $(OPENSOURCE_DIR);   (tar xkfj ftpd.tar.bz2 2> /dev/null || true)
	$(MAKE) -C $(OPENSOURCE_DIR)/ftpd $(BUILD_FTPD)
else
bftpd:
endif

ifneq ($(strip $(BUILD_HTTPC)),)
httpc:
	$(MAKE) -C $(OPENSOURCE_DIR)/httpc $(BUILD_HTTPC)
else
httpc:
endif

ifneq ($(strip $(BUILD_MPD)),)
mpd:
	$(MAKE) -C $(OPENSOURCE_DIR)/mpd $(BUILD_MPD)
else
mpd:
endif


ifneq ($(strip $(BUILD_DDNSD)),)
ddnsd:
	$(MAKE) -C $(BROADCOM_DIR)/ddnsd $(BUILD_DDNSD)
else
ddnsd:
endif

ifneq ($(strip $(BUILD_SNTP)),)
sntp:
	$(MAKE) -C $(BROADCOM_DIR)/sntp $(BUILD_SNTP)
else
sntp:
endif

ifneq ($(strip $(BUILD_EPITTCP)),)
epittcp:
	$(MAKE) -C $(BROADCOM_DIR)/epittcp $(BUILD_EPITTCP)
else
epittcp:
endif

# Start: Andy porting from 2.21.5, 2005/04/14
ifneq ($(strip $(BUILD_DPROXY)),)
dproxy:
	$(MAKE) -C $(OPENSOURCE_DIR)/dproxy $(BUILD_DPROXY)
else
dproxy:
endif
# End: Andy porting from 2.21.5, 2005/04/14

hosttools:
ifneq ($(strip $(BUILD_SIGNATURE_RSA)),)
	$(MAKE) -C $(HOSTTOOLS_DIR)/sigmak
endif
	$(MAKE) -C $(HOSTTOOLS_DIR)


buildimage: $(KERNEL_DIR)/vmlinux
	su --command="cd $(TARGETS_DIR); ./buildFS"
#	find $(TARGET_FS) -name CVS | xargs rm -rf
ifeq ($(strip $(BRCM_KERNEL_ROOTFS)),squashfs)
	#$(HOSTTOOLS_DIR)/mksquashfs $(TARGET_FS) $(PROFILE_DIR)/rootfs.img -noappend -be -always-use-fragments -gzip
	$(HOSTTOOLS_DIR)/mksquashfs $(TARGET_FS) $(PROFILE_DIR)/rootfs.img -noappend -be -lzma -no-fragments -noI
else
 ifeq ($(strip $(BRCM_KERNEL_ROOTFS)),cramfs)
#	$(HOSTTOOLS_DIR)/mkcramfs -r -g $(TARGET_FS) $(PROFILE_DIR)/rootfs.img
	$(HOSTTOOLS_DIR)/mkcramfs -r $(TARGET_FS) $(PROFILE_DIR)/rootfs.img
 else
  ifeq ($(strip $(BRCM_KERNEL_ROOTFS)),jffs2)
	$(HOSTTOOLS_DIR)/mkfs.jffs2 -b -p -e $(BRCM_FLASHBLK_SIZE) -r $(TARGET_FS) -o $(PROFILE_DIR)/rootfs.img
  endif
 endif
endif

ifneq ($(strip $(BRCM_KERNEL_ROOTFS)),nfs)
	cd $(PROFILE_DIR); \
	cp $(KERNEL_DIR)/vmlinux . ; \
	$(STRIP) --remove-section=.note --remove-section=.comment vmlinux; \
	$(OBJCOPY) -O binary vmlinux vmlinux.bin; \
	$(HOSTTOOLS_DIR)/cmplzma -k -2 vmlinux vmlinux.bin vmlinux.lz;\
	$(HOSTTOOLS_DIR)/bcmImageBuilder --output $(FS_KERNEL_IMAGE_NAME) --board $(BRCM_BOARD_ID) --blocksize $(BRCM_FLASHBLK_SIZE) --cfefile $(CFE_FILE) --rootfsfile rootfs.img --kernelfile vmlinux.lz; \
	$(HOSTTOOLS_DIR)/bcmImageBuilder --output $(CFE_FS_KERNEL_IMAGE_NAME) --board $(BRCM_BOARD_ID) --blocksize $(BRCM_FLASHBLK_SIZE) --cfefile $(CFE_FILE) --rootfsfile rootfs.img --kernelfile vmlinux.lz --include-cfe; \
	mkdir -p $(IMAGES_DIR)
	cp $(PROFILE_DIR)/$(FS_KERNEL_IMAGE_NAME) $(IMAGES_DIR)/$(FS_KERNEL_IMAGE_NAME)_$(BRCM_RELEASETAG)-$(shell date '+%y%m%d_%H%M')
	echo
	echo -e "Done! Image $(PROFILE) has been built in $(IMAGES_DIR)."
else
	cd $(PROFILE_DIR); \
	cp $(KERNEL_DIR)/vmlinux . ; \
	$(STRIP) --remove-section=.note --remove-section=.comment vmlinux
	@echo
	@echo -e "\t=== Following the below steps to start your NFS root file system on host ==="
	@echo -e "Step 1: Copy $(PROFILE_DIR)/vmlinux to your TFTP server boot directory, such as /tftpboot"
	@echo -e "Step 2: Add \"$(PROFILE_DIR)/fs *(rw,no_root_squash)\" to /etc/exports"
	@echo -e "Step 3: Become root and restart your nfs server, such as \"service nfs restart\""
	@echo -e "Step 4: Reboot your board and break into CFE bootloader, choose h on \"Run from flash/host\" and vmlinux on \"Default host run file name\""
endif


###########################################
#
# System code clean-up
#
###########################################	
	
subdirs: $(patsubst %, _dir_%, $(SUBDIRS))

$(patsubst %, _dir_%, $(SUBDIRS)) :
	$(MAKE) -C $(patsubst _dir_%, %, $@) $(TGT)

clean: target_clean app_clean kernel_clean hosttools_clean
	rm -f .tmpconfig*

fssrc_clean:
	rm -fr $(INSTALL_DIR)/bin
	rm -fr $(INSTALL_DIR)/sbin
	rm -fr $(INSTALL_DIR)/lib
	rm -fr $(INSTALL_DIR)/upnp
	rm -fr $(INSTALL_DIR)/docs
	rm -fr $(INSTALL_DIR)/webs
	rm -fr $(INSTALL_DIR)/usr
	rm -fr $(INSTALL_DIR)/linuxrc

kernel_clean: sanity_check
	$(MAKE) -C $(KERNEL_DIR) mrproper
	rm -f $(KERNEL_DIR)/arch/mips/defconfig
	rm -f $(HOSTTOOLS_DIR)/lzma/decompress/*.o
	rm -f $(TARGETS_DIR)/*.o $(TARGETS_DIR)/.*.flags $(TARGETS_DIR)/.depend
	rm -rf $(XCHANGE_DIR)/dslx/lib/LinuxKernel
	rm -rf $(XCHANGE_DIR)/dslx/obj/LinuxKernel

app_clean: sanity_check fssrc_clean
	$(MAKE) subdirs TGT=clean
	rm -rf $(XCHANGE_DIR)/dslx/lib/LinuxUser
	rm -rf $(XCHANGE_DIR)/dslx/obj/LinuxUser

target_clean: sanity_check
	rm -f $(PROFILE_DIR)/rootfs.img
	rm -f $(PROFILE_DIR)/vmlinux
	rm -f $(PROFILE_DIR)/vmlinux.bin
	rm -f $(PROFILE_DIR)/vmlinux.lz
	rm -f $(PROFILE_DIR)/$(FS_KERNEL_IMAGE_NAME)
	rm -f $(PROFILE_DIR)/$(CFE_FS_KERNEL_IMAGE_NAME)
	rm -f $(PROFILE_DIR)/$(FLASH_IMAGE_NAME)
	rm -fr $(PROFILE_DIR)/modules
	find targets -name vmlinux -print -exec rm -f "{}" ";"
	su --command="rm -fr $(TARGET_FS)"

hosttools_clean:
	$(MAKE) -C $(HOSTTOOLS_DIR) clean
	
###########################################
#
# System-wide exported variables
#
###########################################	

export  BRCM_VERSION BRCM_RELEASE BRCM_EXTRAVERSION BRCM_RELEASETAG BRCM_BOARD RUN_NOISE \
	INC_KERNEL_BASE KERNEL_DIR BRCMDRIVERS_DIR USERAPPS_DIR HOSTTOOLS_DIR TARGETS_DIR DEFAULTCFG_DIR XCHANGE_DIR FSSRC_DIR BUSYBOX_DIR \
	PROFILE_DIR INSTALL_DIR LINUXDIR INC_BRCMDRIVER_PUB_PATH INC_BRCMDRIVER_PRIV_PATH INC_BRCMBOARDPARMS_PATH INC_ENDPOINT_PATH INC_ADSLDRV_PATH BROADCOM_CFM_DIR INC_BRCMCFM_PATH BRCM_KERNEL_ROOTFS BRCMAPPS BRCM_MIPS_ONLY_BUILD \
	BRCM_UCLIBC CROSS_COMPILE TOOLCHAIN AS LD CC CXX AR NM STRIP SSTRIP OBJCOPY OBJDUMP RANLIB LIB_PATH LIBCDIR LIBDIR BBB_VOIP_DIAL_PLAN SUPPORT_MULTIPLE_VOIP_PROVIDERS\
	BUILD_BR2684CTL BUILD_PVC2684CTL BUILD_RT2684D BUILD_BRCTL BUILD_CFM BUILD_CFM_CLI BUILD_IPTABLES BUILD_EBTABLES BUILD_VODSL BUILD_SIPROXD \
	BRCM_APP_PHONE BUILD_SOAP BUILD_SOAP_VER BRCM_DSP_CODEC_G711 BRCM_DSP_CODEC_G723 BRCM_DSP_CODEC_G726 BRCM_DSP_CODEC_G729 BRCM_MIPS_ONLY_BUILD \
	DEFAULT_USB_PID BRCM_DSP_CODEC_G7xx BRCM_DSP_PCM BRCM_DSP_HYBRID BRCM_DSP_HYBRID_EXT BRCM_DSP_APM_FXO BRCM_DSP_APM_FXO_EXT BRCM_DSP_HYBRID_FXO \
	BRCM_DSP_HYBRID_FXO_EXT BRCM_DSP_CODEC_T38_EXT BRCM_DSP_CODEC_T38_INT BRCM_DSP_HAL BRCM_DSP_HAL_EXTENSION  XCHANGE_DSP_APP_EXTENSION BRCM_VOICE_COUNTRY_JAPAN BRCM_VOICE_GLOBAL_CFLAGS \
	BUILD_PPPD BUILD_REAIM BRCM_KERNEL_NETQOS BUILD_GDBSERVER BUILD_UDHCP ODM_KILL_DHCPD BUILD_DHCPR BUILD_UPNP \
	BUILD_SNMP BUILD_NAS BUILD_WLCTL BUILD_BUSYBOX BUILD_DNSPROBE BUILD_SLACTEST BUILD_VCONFIG BUILD_ETHWAN BUILD_PPP_DOMAIN_SUFFIX \
	BUILD_ZEBRA BUILD_ATMCTL BUILD_ADSLCTL BUILD_NETCTL BUILD_IGMP BRCM_PTHREADS BUILD_DIAGAPP \
	BUILD_CFM_TELNETD BUILD_CFM_SSHD BUILD_SSHD_MIPS_GENKEY BUILD_FTPD BRCM_DRIVER_PCI \
	BRCM_PSI_VERSION WEB_POPUP BUILD_DIR BUILD_DDNSD BUILD_SNTP BUILD_TOD BUILD_IPPD BUILD_VCONFIG JTAG_KERNEL_DEBUG \
	BUILD_EPITTCP BRCM_DRIVER_WIRELESS BUILD_DPROXY BUILD_PPPDEFAULT_GW BUILD_MTU_LAN_PPP ODM_VOICE_QOS \
	BRCM_LANG_MMM BRCM_DEFAULT_HOST_NAME DEFAULT_WLAN_ESSID BUILD_PPP_IPEXTENSION BRCM_DRIVER_PHONE \
	BUILD_EPITTCP BUILD_NVRAM BUILD_SES BUILD_BRCM_VLAN BRCM_SNMP BRCM_LDX_APP BUILD_HTTPC BUILD_STATIC_DNS \
	BRCM_VODSL_DUAL_3341 BUILD_DOMAIN_LOCK DISABLE_IGMP_SNOOPING_OPTION BUILD_PARTCONF BUILD_USER_ACCOUNT BRCM_KERNEL_ATMQOS \
	BRCM_KERNEL_DN_IPQOS ODM_WANIP_GWNAME SUPPORT_IDLE_TIMER_IPEXTENSION

export CONFIG_NET_SCH_CBQ CONFIG_NET_SCH_CSZ CONFIG_NET_SCH_HPFQ CONFIG_NET_SCH_HFCS CONFIG_NET_SCH_ATM \
	CONFIG_NET_SCH_PRIO CONFIG_NET_SCH_RED CONFIG_NET_SCH_SFQ CONFIG_NET_SCH_TEQL CONFIG_NET_SCH_TBF \
	CONFIG_NET_SCH_GRED CONFIG_NET_SCH_DSMARK CONFIG_NET_SCH_INGRESS CONFIG_NET_QOS CONFIG_NET_ESTIMATOR \
	CONFIG_NET_CLS CONFIG_NET_CLS_TCINDEX CONFIG_NET_CLS_ROUTE4 CONFIG_NET_CLS_ROUTE CONFIG_NET_CLS_FW \
	CONFIG_NET_CLS_U32 CONFIG_NET_CLS_RSVP CONFIG_NET_CLS_RSVP6 CONFIG_NET_CLS_POLICE ODM_LANG_NNN NNN_NAT_GUI_SUPPORT \
	ODM_MULTI_LANG BUILD_BLOCK_MULTICAST_FLOOD BUILD_MPD NNN_POT

export BRCM_KERNEL_NF_NAT_ALG_SIP BUILD_NSASOFT_TRAFFIC_EMULATOR BUILD_AUTO_PROVISION_ON_WAN ODM_AUTO_PROVISION_LAN BUILD_SYS_ALG BUILD_SYS_VPN_ALG BUILD_SYS_SIP_ALG
export SIP_PROXY_FAIL_RECOVER SIP_RTP_MONITOR BBB_ALCATEL_SIP SUPPORT_XML_API SUPPORT_XML_API_FOR_SIEMENS 
export FIND_TRANSACTION_WITHOUT_VIA_BRANCH
export ODM_TELSTRA_APPROVAL SIEMENS_HANSENET_STATUS_ONLY BUILD_REMOVE_PPPOE_PASS_THROUGH BUILD_PPP_ALWAYS_RETRY BUILD_MERDEFAULT_GW STRIP_USERNAME_PASSWORD BUILD_SIP_REALM
export BUILD_AUTO_DETECT_DEFAULT_PVC VOIP_INTER_DIGIT_TIMER VOIP_DIAL_MAP_TIMER 
export SUPPORT_MULTIPLE_VOIP_PROVIDERS SIP_SUPPORT_PROVIDERLIST_SIEMENS
export SUPPORT_SERVICE_MODE SIP_SUPPORT_VMWI SIP_SUPPORT_CFW SIP_SUPPORT_DNS_SRV_RR BBB_VOIP_FULL_BASIC_SETUP_GUI
export VOICE_QUALITY_CONTROL_BY_ATM BUILD_BBB_PPP_ALWAYSON_RETRY30 BUILD_POLICY_ROUTING BUILD_SUPPORT_PPPDBG_SYSLOG BUILD_BBB_SYSLOG