Wireless -- SecureEasySetup(SES)

This page allows you to configure wireless security by SecureEasySetup technology. You may create a secured wireless (SES) network and add wireless clients to the secured network one at a time after SecureEasySetup is enabled.

SES:

Disabled Enabled

Current SSID:

Create SES network, add clients later:

Create SES network and add a client:

Add a client to the current SES network:

Reset to unsecured open network or abort the current registration:

SES has the following modes available:
Configurator mode: allow SES AP or SES client to retrieve security parameters from this device.
Configurator for SES Client: similar to Configurator mode, but allow only SES client.
Configurator for WDS only: similar to Configurator mode, but allow only SES AP.
Client mode: retrieve security parameters from an already configured SES AP to form a SES+WDS network.
Auto mode: automatically act as Configurator or Client.

To create WDS connection between 2 APs:
Long-Push on both APs to clean up their SES settings. Choose an AP to be the main AP, Short-Push on the main AP. Wait 2 minutes for the registration period to end. Another alternative is to use the "NewSESNW" button above. Now, short push on the main AP and the other AP in any order. This will create the secure WDS link between them.

SES Mode:

Configurator for SES Client Auto Configurator Configurator for WDS only Client

Join existing SES WDS network:

Reset to unsecured open network: