./ips | xargs -i ./dell-switch.pl {} "show bridge address"

./ips | xargs -i ./dell-switch.pl {} "show interfaces status"

./ips | xargs -i ./dell-switch.pl {} "show running-config"

This will save all commands executed to git repository under log/

However, somethimes you just need to execute few commands but don't want
log output (if configuring switches in batch, for example). You can do
that by setting NO_LOG enviroment variable like this:

grep -A 1 sw-lib /etc/munin/munin.conf | grep 10.20 | awk '{ print $2 }' \
| NO_LOG=1 xargs -i ./dell-switch.pl 'snmp-server community public-or-not ro view Default' 'exit' 'copy running-config startup-config'


To use fans script first pull show system from all switches:

./ips | xargs -i ./dell-switch.pl {} "show system"


Backup switch configuration to tftp server:

./ips 1,2 | awk '{ print "./dell-switch.pl "$1" \"copy startup-config tftp://10.20.0.253/backups/"$2".config\"" }' | NO_LOG=1 sh -x


To use snmp* utils, create snmp.conf with:

COMMUNITY=my-comminity-or-public


# Find mac address on network

collect all mac addresses using snmp

dpavlin@black:~/dell-switch$ ./sw-mac-port.sh 

find interesting mac

dpavlin@black:~/dell-switch$ ./find-port-for-mac 00:1e:8c:0a:49:3c # eeepy eth0
sw-e300 1 00:1e:8c:0a:49:3c 23
sw-e300-2 1 00:1e:8c:0a:49:3c 21
# mac 00:1e:8c:0a:49:3c on 41 switches

dpavlin@black:~/dell-switch$ ./find-port-for-mac 00:80:c8:37:6d:76 # eeepy eth3
sw-e300 1 00:80:c8:37:6d:76 17
# mac 00:80:c8:37:6d:76 on 41 switches