# find new disk

megacli -PDList -aALL | less

root@lib26:/home/dpavlin# megacli -PDList -aALL | grep -B 17 -A 6 Unconfigured

Enclosure Device ID: 32
Slot Number: 6
Enclosure position: 1
Device Id: 6
WWN: 5002538d41e987b9
Sequence Number: 7
Media Error Count: 0
Other Error Count: 6
Predictive Failure Count: 0
Last Predictive Failure Event Seq Number: 0
PD Type: SATA

Raw Size: 238.474 GB [0x1dcf32b0 Sectors]
Non Coerced Size: 237.974 GB [0x1dbf32b0 Sectors]
Coerced Size: 237.875 GB [0x1dbc0000 Sectors]
Sector Size:  0
Firmware state: Unconfigured(good), Spun Up
Device Firmware Level: 3B6Q
Shield Counter: 0
Successful diagnostics completion on :  N/A
SAS Address(0): 0x4433221102000000
Connected Port Number: 2(path0)
Inquiry Data: S39KNB0J416517P     Samsung SSD 850 PRO 256GB               EXM03B6Q

# remember enclouser id 32 and slot 6 and verify it:

root@lib26:/srv/gnt-info# megacli -PdInfo -PhysDrv[32:6] -a 0


# check if JBOD is enabled on adapter

root@lib26:/home/dpavlin# megacli -AdpGetProp EnableJBOD -a0

Adapter 0: JBOD: Enabled

Exit Code: 0x00


# verify that there is foreign disk

root@lib26:/home/dpavlin# megacli -CfgForeign -Scan -aALL 
                                     
There are 1 foreign configuration(s) on controller 0.

Exit Code: 0x00


# verify that it's new drive

root@lib26:/home/dpavlin# megacli -CfgForeign -Dsply 0 -a0


# clear foreign on drive

root@lib26:/home/dpavlin# megacli -CfgForeign -Clear 0 -a0

Foreign configuration 0 is cleared on controller 0.

Exit Code: 0x00


# turn disk to JBOD

root@lib26:/home/dpavlin# megacli -PDMakeJBOD -PhysDrv[32:6] -a0

Adapter: 0: EnclId-32 SlotId-6 state changed to JBOD.

Exit Code: 0x00