git.rot13.org Git - goodfet/blob - firmware/apps/jtag/jtag430x2.c

   1 /*! \file jtag430x2.c
   2   \author Travis Goodspeed <travis at radiantmachines.com>
   3   \brief MSP430X2 JTAG (20-bit)
   4 */
   5
   6 #include "platform.h"
   7 #include "command.h"
   8 #include "jtag.h"
   9
  10 unsigned char jtagid;
  11
  12 //! Get the JTAG ID
  13 unsigned char jtag430x2_jtagid(){
  14   jtag430_resettap();
  15   return jtagid=jtag_ir_shift8(IR_BYPASS);
  16 }
  17 //! Start JTAG, take pins
  18 unsigned char jtag430x2_start(){
  19   jtagsetup();
  20
  21   //Known-good starting position.
  22   //Might be unnecessary.
  23   SETTST;
  24   SETRST;
  25
  26   delay(0xFFFF);
  27
  28   //Entry sequence from Page 67 of SLAU265A for 4-wire MSP430 JTAG
  29   CLRRST;
  30   delay(10);
  31   CLRTST;
  32
  33   delay(5);
  34   SETTST;
  35   msdelay(5);
  36   SETRST;
  37   P5DIR&=~RST;
  38
  39   delay(0xFFFF);
  40
  41   //Perform a reset and disable watchdog.
  42   return jtag430x2_jtagid();
  43 }
  44
  45 //! Grab the core ID.
  46 unsigned int jtag430_coreid(){
  47   jtag_ir_shift8(IR_COREIP_ID);
  48   return jtag_dr_shift16(0);
  49 }
  50
  51 //! Grab the device ID.
  52 unsigned long jtag430_deviceid(){
  53   jtag_ir_shift8(IR_DEVICE_ID);
  54   return jtag_dr_shift20(0);
  55 }
  56
  57
  58 //! Write data to address
  59 void jtag430x2_writemem(unsigned long adr,
  60                         unsigned int data){
  61   jtag_ir_shift8(IR_CNTRL_SIG_CAPTURE);
  62   if(jtag_dr_shift16(0) & 0x0301){
  63     CLRTCLK;
  64     jtag_ir_shift8(IR_CNTRL_SIG_16BIT);
  65     if(adr>=0x100)
  66       jtag_dr_shift16(0x0500);//word mode
  67     else
  68       jtag_dr_shift16(0x0510);//byte mode
  69     jtag_ir_shift8(IR_ADDR_16BIT);
  70     jtag_dr_shift20(adr);
  71
  72     SETTCLK;
  73
  74     jtag_ir_shift8(IR_DATA_TO_ADDR);
  75     jtag_dr_shift16(data);//16 word
  76
  77     CLRTCLK;
  78     jtag_ir_shift8(IR_CNTRL_SIG_16BIT);
  79     jtag_dr_shift16(0x0501);
  80     SETTCLK;
  81
  82     CLRTCLK;
  83     SETTCLK;
  84     //init state
  85   }else{
  86     while(1) P1OUT^=1; //loop if locked up
  87   }
  88 }
  89
  90 //! Read data from address
  91 unsigned int jtag430x2_readmem(unsigned long adr){
  92   unsigned int toret=0;
  93   //unsigned int tries=5;
  94
  95   while(1){
  96     do{
  97       jtag_ir_shift8(IR_CNTRL_SIG_CAPTURE);
  98     }while(!(jtag_dr_shift16(0) & 0x0301));
  99
 100     if(jtag_dr_shift16(0) & 0x0301){
 101       // Read Memory
 102       CLRTCLK;
 103       jtag_ir_shift8(IR_CNTRL_SIG_16BIT);
 104       if(adr>=0x100){
 105         jtag_dr_shift16(0x0501);//word read
 106       }else{
 107         jtag_dr_shift16(0x0511);//byte read
 108       }
 109
 110       jtag_ir_shift8(IR_ADDR_16BIT);
 111       jtag_dr_shift20(adr); //20
 112
 113       jtag_ir_shift8(IR_DATA_TO_ADDR);
 114       SETTCLK;
 115       CLRTCLK;
 116       toret = jtag_dr_shift16(0x0000);
 117
 118       SETTCLK;
 119
 120       //Cycle a bit.
 121       CLRTCLK;
 122       SETTCLK;
 123       return toret;
 124     }
 125   }
 126   //return toret;
 127 }
 128
 129 //! Syncs a POR.
 130 unsigned int jtag430x2_syncpor(){
 131   jtag_ir_shift8(IR_CNTRL_SIG_16BIT);
 132   jtag_dr_shift16(0x1501); //JTAG mode
 133   while(!(jtag_dr_shift16(0) & 0x200));
 134   return jtag430x2_por();
 135 }
 136
 137 //! Executes an MSP430X2 POR
 138 unsigned int jtag430x2_por(){
 139   unsigned int i = 0;
 140
 141   // tick
 142   CLRTCLK;
 143   SETTCLK;
 144
 145   jtag_ir_shift8(IR_CNTRL_SIG_16BIT);
 146   jtag_dr_shift16(0x0C01);
 147   jtag_dr_shift16(0x0401);
 148
 149   //cycle
 150   for (i = 0; i < 10; i++){
 151     CLRTCLK;
 152     SETTCLK;
 153   }
 154
 155   jtag_dr_shift16(0x0501);
 156
 157   // tick
 158   CLRTCLK;
 159   SETTCLK;
 160
 161
 162   // Disable WDT
 163   jtag430x2_writemem(0x015C, 0x5A80);
 164
 165   // check state
 166   jtag_ir_shift8(IR_CNTRL_SIG_CAPTURE);
 167   if(jtag_dr_shift16(0) & 0x0301)
 168     return(1);//ok
 169
 170   return 0;//error
 171 }
 172
 173
 174 //! Check the fuse.
 175 unsigned int jtag430x2_fusecheck(){
 176   int i;
 177   for(i=0;i<3;i++){
 178     jtag_ir_shift8(IR_CNTRL_SIG_CAPTURE);
 179     if(jtag_dr_shift16(0xAAAA)==0x5555)
 180       return 1;//blown
 181   }
 182   return 0;//unblown
 183 }
 184
 185
 186 //! Handles MSP430X2 JTAG commands.  Forwards others to JTAG.
 187 void jtag430x2handle(unsigned char app,
 188                      unsigned char verb,
 189                      unsigned char len){
 190   register char blocks;
 191
 192   unsigned int i,val;
 193   unsigned long at;
 194
 195   //jtag430_resettap();
 196
 197   switch(verb){
 198   case START:
 199     //Enter JTAG mode.
 200     //do
 201       cmddata[0]=jtag430x2_start();
 202     //while(cmddata[0]==00 || cmddata[0]==0xFF);
 203
 204     //MSP430 or MSP430X
 205     if(jtagid==MSP430JTAGID){
 206       jtag430mode=MSP430MODE;
 207       drwidth=16;
 208     }else if(jtagid==MSP430X2JTAGID){
 209       jtag430mode=MSP430X2MODE;
 210       drwidth=20;
 211     }else{
 212       txdata(app,NOK,1);
 213       return;
 214     }
 215
 216     jtag430x2_fusecheck();
 217
 218     jtag430x2_syncpor();
 219
 220     jtag430_resettap();
 221
 222     txdata(app,verb,1);
 223     break;
 224   case JTAG430_READMEM:
 225   case PEEK:
 226     blocks=(len>4?cmddata[4]:1);
 227     at=cmddatalong[0];
 228
 229     /*
 230     cmddataword[0]=jtag430x2_readmem(at);
 231     txdata(app,verb,2);
 232     break;
 233     */
 234
 235     len=0x80;
 236     serial_tx(app);
 237     serial_tx(verb);
 238     serial_tx(len);
 239
 240     while(blocks--){
 241       for(i=0;i<len;i+=2){
 242         jtag430_resettap();
 243         delay(10);
 244
 245         val=jtag430x2_readmem(at);
 246
 247         at+=2;
 248         serial_tx(val&0xFF);
 249         serial_tx((val&0xFF00)>>8);
 250       }
 251     }
 252
 253     break;
 254   case JTAG430_COREIP_ID:
 255     cmddataword[0]=jtag430_coreid();
 256     txdata(app,verb,2);
 257     break;
 258   case JTAG430_DEVICE_ID:
 259     cmddatalong[0]=jtag430_deviceid();
 260     txdata(app,verb,4);
 261     break;
 262
 263   case JTAG430_WRITEMEM:
 264   case POKE:
 265     jtag430x2_writemem(cmddatalong[0],
 266                        cmddataword[2]);
 267     cmddataword[0]=jtag430x2_readmem(cmddatalong[0]);
 268     txdata(app,verb,2);
 269     break;
 270
 271     //unimplemented functions
 272   case JTAG430_HALTCPU:
 273   case JTAG430_RELEASECPU:
 274   case JTAG430_SETINSTRFETCH:
 275   case JTAG430_WRITEFLASH:
 276   case JTAG430_ERASEFLASH:
 277   case JTAG430_SETPC:
 278     txdata(app,NOK,0);
 279     break;
 280   default:
 281     jtaghandle(app,verb,len);
 282   }
 283   jtag430_resettap();
 284 }