2 \author Travis Goodspeed
3 \brief Chipcon SPI Register Interface
5 Unfortunately, there is very little similarity between the CC2420
6 and the CC2500, to name just two of the myriad of Chipcon SPI
7 radios. Auto-detection will be a bit difficult, but more to the
8 point, all high level functionality must be moved into the client.
11 //Higher level left to client application.
23 //! Handles a Chipcon SPI command.
24 void ccspi_handle_fn( uint8_t const app,
28 // define the ccspi app's app_t
29 app_t const ccspi_app = {
41 "\tThe CCSPI app adds support for the Chipcon SPI register\n"
42 "\tinterface. Unfortunately, there is very little similarity\n"
43 "\tbetween the CC2420 and the CC2500, to name just two of the\n"
44 "\tmyriad of Chipcon SPI radios. Auto-detection will be a bit\n"
45 "\tdifficult, but more to the point, all high level functionality\n"
46 "\tmust be moved into the client.\n"
49 //! Set up the pins for CCSPI mode.
56 P4OUT|=BIT5; //activate CC2420 voltage regulator
63 //Begin a new transaction.
68 //! Read and write an CCSPI byte.
69 u8 ccspitrans8(u8 byte){
70 register unsigned int bit;
71 //This function came from the CCSPI Wikipedia article.
74 for (bit = 0; bit < 8; bit++) {
75 /* write MOSI on trailing edge of previous clock */
84 /* read MISO on trailing edge */
94 u8 ccspi_regwrite(u8 reg, const u8 *buf, int len){
105 u8 ccspi_regread(u8 reg, u8 *buf, int len){
108 reg=ccspitrans8(reg);
110 *buf++=ccspitrans8(0);
116 //! Handles a Chipcon SPI command.
117 void ccspi_handle_fn( uint8_t const app,
122 //debugstr("Chipcon SPI handler.");
126 cmddata[0]|=0x40; //Set the read bit.
131 CLRSS; //Drop !SS to begin transaction.
133 cmddata[i]=ccspitrans8(cmddata[i]);
134 SETSS; //Raise !SS to end transaction.
135 txdata(app,verb,len);
143 //Has there been an overflow?
145 debugstr("Clearing overflow");
147 ccspitrans8(0x08); //SFLUSHRX
153 //Wait for completion.
158 ccspitrans8(CCSPI_RXFIFO | 0x40);
159 //ccspitrans8(0x3F|0x40);
160 cmddata[0]=0xff; //to be replaced with length
161 for(i=0;i<cmddata[0]+2;i++)
162 cmddata[i]=ccspitrans8(0xde);
167 ccspitrans8(0x08); //SFLUSHRX
169 txdata(app,verb,cmddata[0]+2);
175 debugstr("Can't RX a packet with SFD and FIFOP definitions.");
182 ccspitrans8(CCSPI_SFLUSHRX);
188 debugstr("Coming soon.");
194 ccspitrans8(CCSPI_SFLUSHTX);
202 //Wait for last packet to TX.
203 //while(ccspi_status()&BIT3);
207 ccspitrans8(CCSPI_TXFIFO);
208 for(i=0;i<cmddata[0];i++)
209 ccspitrans8(cmddata[i]);
212 //Transmit the packet.
214 ccspitrans8(0x04); //STXON
217 //Wait for the pulse on SFD, after which the packet has been sent.
223 ccspitrans8(0x09); //SFLUSHTX
228 debugstr("Can't TX a packet with SFD and FIFOP definitions.");
233 debugstr("Not yet supported in CCSPI");