import sys, time, string, cStringIO, struct, glob, serial, os;
+def getClient(name="GoodFET"):
+ import GoodFET, GoodFETCC, GoodFETAVR, GoodFETSPI, GoodFETMSP430;
+ if(name=="GoodFET" or name=="monitor"): return GoodFET.GoodFET();
+ elif name=="cc" or name=="chipcon": return GoodFETCC.GoodFETCC();
+ elif name=="avr": return GoodFETAVR.GoodFETAVR();
+ elif name=="spi": return GoodFETSPI.GoodFETSPI();
+ elif name=="msp430": return GoodFETSPI.GoodFETMSP430();
+
+ print "Unsupported target: %s" % name;
+ sys.exit(0);
+
class GoodFET:
"""GoodFET Client Library"""
def __init__(self, *args, **kargs):
self.data=[0];
+
+
+ def getConsole(self):
+ from GoodFETConsole import GoodFETConsole;
+ return GoodFETConsole(self);
def timeout(self):
print "timeout\n";
def serInit(self, port=None):
parity = serial.PARITY_NONE
)
- #Explicitly set RTS
+ #This might cause problems, but it makes failure graceful.
+ #self.serialport._timeout = 5;
+
+ #Explicitly set RTS and DTR to halt board.
self.serialport.setRTS(1);
+ self.serialport.setDTR(1);
#Drop DTR, which is !RST, low to begin the app.
self.serialport.setDTR(0);
self.serialport.flushInput()
#if data!=None:
# count=len(data); #Initial count ignored.
- #print "TX %02x %02x" % (app,verb);
+ #print "TX %02x %02x %04x" % (app,verb,count);
#little endian 16-bit length
self.serialport.write(chr(count&0xFF));
#print "count=%02x, len(data)=%04x" % (count,len(data));
if count!=0:
- for i in range(0,count):
+ if(isinstance(data,list)):
+ for i in range(0,count):
#print "Converting %02x at %i" % (data[i],i)
- data[i]=chr(data[i]);
+ data[i]=chr(data[i]);
+ #print type(data);
outstr=''.join(data);
- #outstr=data;
self.serialport.write(outstr);
if not self.besilent:
self.readcmd();
#Debugging string; print, but wait.
if self.app==0xFF and self.verb==0xFF:
print "# DEBUG %s" % self.serialport.read(self.count);
+ sys.stdout.flush();
else:
self.data=self.serialport.read(self.count);
return self.data;
#Glitching stuff.
- def glitchAPP(self,app):
+ def glitchApp(self,app):
"""Glitch into a device by its application."""
self.data=[app&0xff];
self.writecmd(self.GLITCHAPP,0x80,1,self.data);
#return ord(self.data[0]);
- def glitchVERB(self,app,verb, data):
- """Glitch during a transaction.."""
+ def glitchVerb(self,app,verb,data):
+ """Glitch during a transaction."""
+ if data==None: data=[];
self.data=[app&0xff, verb&0xFF]+data;
self.writecmd(self.GLITCHAPP,0x81,len(self.data),self.data);
#return ord(self.data[0]);
+ def glitchstart(self):
+ """Glitch into the AVR application."""
+ self.glitchVerb(self.APP,0x20,None);
+ def glitchstarttime(self):
+ """Measure the timer of the START verb."""
+ return self.glitchTime(self.APP,0x20,None);
+ def glitchTime(self,app,verb,data):
+ """Time the execution of a verb."""
+ if data==None: data=[];
+ self.data=[app&0xff, verb&0xFF]+data;
+ self.writecmd(self.GLITCHAPP,0x82,len(self.data),self.data);
+ return ord(self.data[0])+(ord(self.data[1])<<8);
def glitchVoltages(self,low=0x0880, high=0x0fff):
"""Set glitching voltages. (0x0fff is max.)"""
self.data=[low&0xff, (low>>8)&0xff,
def dir(self,byte):
"""Write a byte to P5DIR."""
self.writecmd(0,0xA0,1,[byte]);
+ def call(self,adr):
+ """Call to an address."""
+ self.writecmd(0,0x30,2,
+ [adr&0xFF,(adr>>8)&0xFF]);
+ def execute(self,code):
+ """Execute supplied code."""
+ self.writecmd(0,0x31,2,#len(code),
+ code);
def peekbyte(self,address):
"""Read a byte of memory from the monitor."""
self.data=[address&0xff,address>>8];
print "Self-test complete.";
+ # The following functions ought to be implemented in
+ # every client.
- def I2Csetup(self):
- """Move the FET into the I2C application."""
- self.writecmd(0x02,0x10,0,self.data); #SPI/SETUP
- def I2Cstart(self):
- """Start an I2C transaction."""
- self.writecmd(0x02,0x20,0,self.data); #SPI/SETUP
- def I2Cstop(self):
- """Stop an I2C transaction."""
- self.writecmd(0x02,0x21,0,self.data); #SPI/SETUP
- def I2Cread(self,len=1):
- """Read len bytes by I2C."""
- self.writecmd(0x02,0x00,1,[len]); #SPI/SETUP
- return self.data;
- def I2Cwrite(self,bytes):
- """Write bytes by I2C."""
- self.writecmd(0x02,0x01,len(bytes),bytes); #SPI/SETUP
- return ord(self.data[0]);
+ def infostring(self):
+ a=self.peekbyte(0xff0);
+ b=self.peekbyte(0xff1);
+ return "%02x%02x" % (a,b);
+ def lock(self):
+ print "Locking Unsupported.";
+ def erase(self):
+ print "Erasure Unsupported.";
+ def setup(self):
+ return;
+ def start(self):
+ return;
+ def test(self):
+ print "Unimplemented.";
+ return;
+ def status(self):
+ print "Unimplemented.";
+ return;
+ def halt(self):
+ print "Unimplemented.";
+ return;
+ def resume(self):
+ print "Unimplemented.";
+ return;
+ def getpc(self):
+ print "Unimplemented.";
+ return 0xdead;
+ def flash(self,file):
+ """Flash an intel hex file to code memory."""
+ print "Flash not implemented.";
+ def dump(self,file,start=0,stop=0xffff):
+ """Dump an intel hex file from code memory."""
+ print "Dump not implemented.";
+
+ def peek32(self,address, memory="vn"):
+ return (self.peek16(address,memory)+
+ (self.peek16(address+2,memory)<<16));
+ def peek16(self,address, memory="vn"):
+ return (self.peek8(address,memory)+
+ (self.peek8(address+1,memory)<<8));
+ def peek8(self,address, memory="vn"):
+ return 0xde;
projects / goodfet / blobdiff