# * flash manipulation (probably need to get the specific chip for this one)
# * set security (chip-specific)
-import sys, binascii, struct, time
+import sys
+import time
+import struct
+
from GoodFET import GoodFET
from intelhex import IntelHex
PM_abt = 0b10111
PM_und = 0b11011
PM_sys = 0b11111
+
proc_modes = {
0: ("UNKNOWN, MESSED UP PROCESSOR MODE","fsck", "This should Never happen. MCU is in funky state!"),
PM_usr: ("User Processor Mode", "usr", "Normal program execution mode"),
def debugstr(strng):
print >>sys.stderr,(strng)
+
def PSRdecode(psrval):
output = [ "(%s mode)"%proc_modes[psrval&0x1f][1] ]
for x in xrange(5,32):
return " ".join(output)
fmt = [None, "B", "<H", None, "<L", None, None, None, "<Q"]
+
def chop(val,byts):
s = struct.pack(fmt[byts], val)
return [ord(b) for b in s ]
-class GoodFETARM(GoodFET):
+class GoodFETARM7(GoodFET):
"""A GoodFET variant for use with ARM7TDMI microprocessor."""
def __init__(self):
GoodFET.__init__(self)
self.current_dbgstate = 0xffffffff
self.flags = 0xffffffff
self.nothing = 0xffffffff
+ self.stored_regs = []
def __del__(self):
try:
if (self.ARMget_dbgstate()&9) == 9:
ver = (ident >> 28)
partno = (ident >> 12) & 0xffff
mfgid = (ident >> 1) & 0x7ff
- return "Chip IDCODE: 0x%x\n\tver: %x\n\tpartno: %x\n\tmfgid: %x\n" % (ident, ver, partno, mfgid);
+ return "Chip IDCODE: 0x%x\tver: %x\tpartno: %x\tmfgid: %x" % (ident, ver, partno, mfgid);
def ARMeice_write(self, reg, val):
data = chop(val,4)
data.extend([reg])
self.ARMset_register(0,r0)
return retval
def ARMcapture_system_state(self, pcoffset):
+ self.c0Data, self.flags, self.c0Addr = self.ARMchain0(0)
if self.ARMget_dbgstate() & DBG_TBIT:
pcoffset += 8
else:
pcoffset += 4
self.storedPC = self.ARMget_register(15) + pcoffset
self.last_dbg_state = self.ARMget_dbgstate()
- def ARMhaltcpu(self):
+ self.cpsr = self.ARMget_regCPSR()
+ print "ARMcapture_system_state: stored pc: 0x%x last_dbg_state: 0x%x" % (self.storedPC, self.last_dbg_state)
+
+ #def ARMhaltcpu(self):
+ def halt(self):
"""Halt the CPU."""
- if not(self.ARMget_dbgstate()&1):
- self.ARMset_dbgctrl(2)
- if (self.ARMwaitDBG() == 0):
- raise Exception("Timeout waiting to enter DEBUG mode on HALT")
- self.ARMset_dbgctrl(0)
- self.ARMcapture_system_state(PCOFF_DBGRQ)
- if self.last_dbg_state&0x10:
- self.storedPC = self.THUMBgetPC()
- else:
- self.storedPC = self.ARMget_register(15)
- self.storedPC, self.flags, self.nothing = self.ARMchain0(0)
+ if self.ARMget_dbgstate()&DBG_DBGACK:
+ if not len(self.stored_regs):
+ #print "stored regs: " + repr(self.stored_regs)
+ self.stored_regs = self.ARMget_registers()[:15]
+ print self.print_stored_registers()
+ return
+ print "halting cpu"
+ self.ARMset_dbgctrl(2)
+ if (self.ARMwaitDBG() == 0):
+ raise Exception("Timeout waiting to enter DEBUG mode on HALT")
+ self.ARMset_dbgctrl(0)
+
+ self.ARMcapture_system_state(PCOFF_DBGRQ)
+ print "storedPC: %x (%x) flags: %x nothing: %x" % (self.storedPC, self.c0Data, self.flags, self.c0Addr)
if self.ARMget_dbgstate() & DBG_TBIT:
self.ARMsetModeARM()
if self.storedPC ^ 4:
self.ARMset_register(15,self.storedPC&0xfffffffc)
+ self.stored_regs = self.ARMget_registers()[:15]
+ #print "stored regs: " + repr(self.stored_regs)
+ #print self.print_stored_registers()
print "CPSR: (%s) %s"%(self.ARMget_regCPSRstr())
- halt = ARMhaltcpu
+ #halt = ARMhaltcpu
- def ARMreleasecpu(self):
+ #def ARMreleasecpu(self):
+ def resume(self):
"""Resume the CPU."""
- # restore registers FIXME: DO THIS
- if self.ARMget_dbgstate()&1 == 0:
+ # FIXME: restore CPSR
+ # FIXME: true up PC to exactly where we left off...
+ if not self.ARMget_dbgstate()&DBG_DBGACK:
return
- currentPC, self.currentflags, nothing = self.ARMchain0(self.storedPC,self.flags)
+ print "resume"
+ if len(self.stored_regs):
+ #print self.print_stored_registers()
+ self.ARMset_registers(self.stored_regs, 0x7fff)
+ else:
+ print "skipping restore of stored registers due to empty list ? WTFO?"
+
+ currentPC, self.currentflags, nothing = self.ARMchain0(self.storedPC,self.flags, self.c0Addr)
if not(self.flags & F_TBIT): # need to be in arm mode
if self.currentflags & F_TBIT: # currently in thumb mode
self.ARMsetModeARM()
self.ARM_nop(1)
#print hex(self.storedPC)
#print hex(self.ARMget_register(15))
- print hex(self.ARMchain0(self.storedPC,self.flags)[0])
+ #print hex(self.ARMchain0(self.storedPC,self.flags)[0])
+ self.ARMchain0(self.storedPC,self.flags)[0]
self.ARMdebuginstr(THUMB_INSTR_B_IMM | (0x7fc07fc),0)
self.ARM_nop(0)
self.ARMrestart()
- resume = ARMreleasecpu
+ #print >>sys.stderr,"Debug Status:\t%s\n" % self.statusstr()
+ #print >>sys.stderr,"CPSR: (%s) %s"%(self.ARMget_regCPSRstr())
+
+ #resume = ARMreleasecpu
def resettap(self):
self.writecmd(0x13, RESETTAP, 0,[])
def ARMsetModeARM(self):
r0 = None
if ((self.current_dbgstate & DBG_TBIT)):
- debugstr("=== Switching to ARM mode ===")
+ #debugstr("=== Switching to ARM mode ===")
self.ARM_nop(0)
self.ARMdebuginstr(THUMB_INSTR_BX_PC,0)
self.ARM_nop(0)
def ARMsetModeThumb(self): # needs serious work and truing
self.resettap()
- debugstr("=== Switching to THUMB mode ===")
+ #debugstr("=== Switching to THUMB mode ===")
if ( not (self.current_dbgstate & DBG_TBIT)):
self.storedPC |= 1
r0 = self.ARMget_register(0)
#print out
return ''.join(out)
+ def ARMprintChunk(self, adr, wordcount, verbose=False, width=8):
+ for string in self.ARMreprChunk(adr, wordcount, verbose=False, width=8):
+ sys.stdout.write(string)
+
+ def ARMreprChunk(self, adr, wordcount, verbose=False, width=8):
+ adr &= 0xfffffffc
+ endva = adr + (4*wordcount)
+ output = [ "Dwords from 0x%x through 0x%x" % (adr, endva) ]
+ idx = 0
+ for data in self.ARMreadChunk(adr, wordcount, verbose):
+ if (idx % width) == 0:
+ yield ( "\n0x%.8x\t" % (adr + (4*idx)) )
+ yield ( "%.8x " % (data) )
+ idx += 1
+
+ yield("\n")
+
def ARMreadChunk(self, adr, wordcount, verbose=True):
""" Only works in ARM mode currently
WARNING: Addresses must be word-aligned!
"""
regs = self.ARMget_registers()
self.ARMset_registers([0xdeadbeef for x in xrange(14)], 0xe)
- #output = []
count = wordcount
while (wordcount > 0):
if (verbose and wordcount%64 == 0): sys.stderr.write(".")
#print hex(adr)
# FIXME: handle the rest of the wordcount here.
self.ARMset_registers(regs,0xe)
- #return output
-
+
+ '''def ARMreadStream(self, adr, bytecount):
+ #data = [struct.unpack("<L", x) for x in self.ARMreadChunk(adr, (bytecount-1/4)+1)]
+ diff = adr % 4
+ address = adr - diff
+ data = [ struct.pack("<L", x) for x in self.ARMreadChunk(address, (bytecount-1/4)+1) ]
+ return "".join(data)[diff:bytecount]'''
+
ARMreadMem = ARMreadChunk
peek = ARMreadMem
- '''def ARMreadStream(self, adr, bytecount):
- data = [struct.unpack("<L", x) for x in self.ARMreadChunk(adr, (bytecount-1/4)+1)]
- return "".join(data)[:bytecount]
- '''
+
def ARMwriteChunk(self, adr, wordarray):
""" Only works in ARM mode currently
WARNING: Addresses must be word-aligned!
d1,b1,a1 = struct.unpack("<LQL",self.data)
return (a1,b1,d1)
- def start(self):
+ def start(self, ident=False):
"""Start debugging."""
self.writecmd(0x13,START,0,self.data)
- print >>sys.stderr,"Identifying Target:"
- ident=self.ARMidentstr()
- print >>sys.stderr,ident
- print >>sys.stderr,"Debug Status:\t%s\n" % self.statusstr()
+ if ident:
+ print >>sys.stderr,"Identifying Target:"
+ print >>sys.stderr, self.ARMidentstr()
+ print >>sys.stderr,"Debug Status:\t%s\n" % self.statusstr()
def stop(self):
"""Stop debugging."""
# print "Flashing buffer to 0x%06x" % adr
# self.writecmd(0x13,MASS_FLASH_PAGE,4,data)
+ def print_registers(self):
+ return [ hex(x) for x in self.ARMget_registers() ]
+
+ def print_stored_registers(self):
+ return [ hex(x) for x in self.stored_regs ]
+
+
+
+######### command line stuff #########
+from intelhex import IntelHex16bit, IntelHex
+
+def arm7_syntax():
+ print "Usage: %s verb [objects]\n" % sys.argv[0]
+ print "%s info" % sys.argv[0]
+ print "%s dump $foo.hex [0x$start 0x$stop]" % sys.argv[0]
+ print "%s erase" % sys.argv[0]
+ print "%s eraseinfo" % sys.argv[0]
+ print "%s flash $foo.hex [0x$start 0x$stop]" % sys.argv[0]
+ print "%s verify $foo.hex [0x$start 0x$stop]" % sys.argv[0]
+ print "%s poke 0x$adr 0x$val" % sys.argv[0]
+ print "%s peek 0x$start [0x$stop]" % sys.argv[0]
+ print "%s reset" % sys.argv[0]
+ sys.exit()
+
+def arm7_main():
+ ''' this function should be called from command line app '''
+
+ #Initialize FET and set baud rate
+ client=GoodFETARM7()
+ client.serInit()
+
+ client.setup()
+ client.start()
+
+ arm7_cli_handler(client, sys.argv)
+
+def arm7_cli_handler(client, argv):
+ if(argv[1]=="info"):
+ client.halt()
+ print >>sys.stderr,"Identifying Target:"
+ print >>sys.stderr, self.ARMidentstr()
+ print >>sys.stderr,"Debug Status:\t%s\n" % self.statusstr()
+ client.resume()
+
+
+ if(argv[1]=="dump"):
+ f = sys.argv[2]
+ start=0x00000000
+ stop=0xFFFFFFFF
+ if(len(sys.argv)>3):
+ start=int(sys.argv[3],16)
+ if(len(sys.argv)>4):
+ stop=int(sys.argv[4],16)
+
+ print "Dumping from %04x to %04x as %s." % (start,stop,f)
+ #h = IntelHex16bit(None)
+ # FIXME: get mcu state and return it to that state
+ client.halt()
+
+ try:
+ h = IntelHex(None)
+ i=start
+ while i<=stop:
+ #data=client.ARMreadMem(i, 48)
+ data=client.ARMreadChunk(i, 48, verbose=0)
+ print "Dumped %06x."%i
+ for dword in data:
+ if i<=stop and dword != 0xdeadbeef:
+ h.puts( i, struct.pack("<I", dword) )
+ i+=4
+ # FIXME: get mcu state and return it to that state
+ except:
+ print "Unknown error during read. Writing results to output file."
+ print "Rename file with last address dumped %06x."%i
+ pass
+
+ client.resume()
+ h.write_hex_file(f)
+
+ '''
+ if(sys.argv[1]=="erase"):
+ print "Erasing main flash memory."
+ client.ARMmasserase()
+
+ if(sys.argv[1]=="eraseinfo"):
+ print "Erasing info memory."
+ client.ARMinfoerase()
+
+
+ '''
+ if(sys.argv[1]=="ivt"):
+ client.halt()
+ client.ARMprintChunk(0x0,0x20)
+ client.resume()
+
+ if(sys.argv[1]=="regs"):
+ client.halt()
+ for i in range(0,16):
+ print "r%i=%04x" % (i,client.ARMget_register(i))
+ client.resume()
+
+ if(sys.argv[1]=="flash"):
+ f=sys.argv[2]
+ start=0
+ stop=0x10000
+ if(len(sys.argv)>3):
+ start=int(sys.argv[3],16)
+ if(len(sys.argv)>4):
+ stop=int(sys.argv[4],16)
+
+ client.halt()
+ h = IntelHex16bit(f)
+
+ #Should this be default?
+ #Makes flashing multiple images inconvenient.
+ #client.ARMmasserase()
+
+ count=0; #Bytes in commit.
+ first=0
+ vals=[]
+ last=0; #Last address committed.
+ for i in h._buf.keys():
+ if((count>0x40 or last+2!=i) and count>0 and i&1==0):
+ #print "%i, %x, %x" % (len(vals), last, i)
+ client.ARMpokeflashblock(first,vals)
+ count=0
+ first=0
+ last=0
+ vals=[]
+ if(i>=start and i<stop and i&1==0):
+ val=h[i>>1]
+ if(count==0):
+ first=i
+ last=i
+ count+=2
+ vals+=[val&0xff,(val&0xff00)>>8]
+ if(i%0x100==0):
+ print "%04x" % i
+ if count>0: #last commit, ivt
+ client.ARMpokeflashblock(first,vals)
+ client.resume()
+
+ if(sys.argv[1]=="verify"):
+ f=sys.argv[2]
+ start=0
+ stop=0xFFFF
+ if(len(sys.argv)>3):
+ start=int(sys.argv[3],16)
+ if(len(sys.argv)>4):
+ stop=int(sys.argv[4],16)
+
+ client.halt()
+ h = IntelHex16bit(f)
+ for i in h._buf.keys():
+ if(i>=start and i<stop and i&1==0):
+ peek=client.peek(i)
+ if(h[i>>1]!=peek):
+ print "ERROR at %04x, found %04x not %04x"%(i,peek,h[i>>1])
+ if(i%0x100==0):
+ print "%04x" % i
+ client.resume()
+
+
+ if(sys.argv[1]=="peek"):
+ start = 0x0000
+ if(len(sys.argv)>2):
+ start=int(sys.argv[2],16)
+
+ stop = start+4
+ if(len(sys.argv)>3):
+ stop=int(sys.argv[3],16)
+
+ print "Peeking from %04x to %04x." % (start,stop)
+ client.halt()
+ for dword in client.ARMreadChunk(start, (stop-start)/4, verbose=0):
+ print "%.4x: %.8x" % (start, dword)
+ start += 4
+ client.resume()
+
+ if(sys.argv[1]=="poke"):
+ start=0x0000
+ val=0x00
+ if(len(sys.argv)>2):
+ start=int(sys.argv[2],16)
+ if(len(sys.argv)>3):
+ val=int(sys.argv[3],16)
+
+ print "Poking %06x to become %04x." % (start,val)
+ client.halt()
+ #???while client.ARMreadMem(start)[0]&(~val)>0:
+ client.ARMwriteChunk(start, [val])
+ print "Poked to %.8x" % client.ARMreadMem(start)[0]
+ client.resume()
+
+
+ if(sys.argv[1]=="reset"):
+ #Set PC to RESET vector's value.
+
+ #client.ARMsetPC(0x00000000)
+ #client.ARMset_regCPSR(0)
+ #client.ARMreleasecpu()
+ client.ARMresettarget(1000)
+
+ #client.ARMreleasecpu()
+ #client.ARMstop()
projects / goodfet / blobdiff