class GoodFETMAXUSB(GoodFET):
MAXUSBAPP=0x40;
+ usbverbose=True;
def service_irqs(self):
"""Handle USB interrupt events."""
usbirq=self.rreg(rUSBIRQ);
- # Note *very* well that these interrupts are handled in order.
- # You might need to alter the order or swap the elif
- # statements for if statements.
-
#Are we being asked for setup data?
if(epirq&bmSUDAVIRQ): #Setup Data Requested
self.wreg(rEPIRQ,bmSUDAVIRQ); #Clear the bit
self.do_SETUP();
if(epirq&bmOUT1DAVIRQ): #OUT1-OUT packet
self.do_OUT1();
- self.wregAS(rEPIRQ,bmOUT1DAVIRQ); #Clear the bit *AFTER* servicing.
+ self.wreg(rEPIRQ,bmOUT1DAVIRQ); #Clear the bit *AFTER* servicing.
if(epirq&bmIN3BAVIRQ): #IN3-IN packet
self.do_IN3();
- self.wreg(rEPIRQ,bmIN3BAVIRQ); #Clear the bit
+ #self.wreg(rEPIRQ,bmIN3BAVIRQ); #Clear the bit
if(epirq&bmIN2BAVIRQ): #IN2 packet
self.do_IN2();
- self.wreg(rEPIRQ,bmIN2BAVIRQ); #Clear the bit
+ #self.wreg(rEPIRQ,bmIN2BAVIRQ); #Clear the bit
#else:
# print "No idea how to service this IRQ: %02x" % epirq;
def do_IN2(self):
"""Overload this."""
def do_OUT1(self):
"""Overload this."""
- print "Ignoring an OUT1 interrupt.";
+ if self.usbverbose: print "Ignoring an OUT1 interrupt.";
def setup2str(self,SUD):
"""Converts the header of a setup packet to a string."""
return "bmRequestType=0x%02x, bRequest=0x%02x, wValue=0x%04x, wIndex=0x%04x, wLength=0x%04x" % (
ashex="";
for foo in toret:
ashex=ashex+(" %02x"%ord(foo));
- print "GET %02x==%s" % (reg,ashex);
+ if self.usbverbose: print "GET %02x==%s" % (reg,ashex);
return toret;
def readbytesAS(self,reg,length):
"""Peek some bytes from a register, acking prior transfer."""
ashex="";
for foo in toret:
ashex=ashex+(" %02x"%ord(foo));
- print "GET %02x==%s" % (reg,ashex);
+ if self.usbverbose: print "GETAS %02x==%s" % (reg,ashex);
return toret;
def ctl_write_nd(self,request):
"""Control Write with no data stage. Assumes PERADDR is set
data="";
if type(tosend)==str:
data=chr((reg<<3)|3)+tosend;
- print "PUT %02x:=%s (0x%02x bytes)" % (reg,tosend,len(data))
+ if self.usbverbose: print "PUT %02x:=%s (0x%02x bytes)" % (reg,tosend,len(data))
else:
data=[(reg<<3)|3]+tosend;
ashex="";
for foo in tosend:
ashex=ashex+(" %02x"%foo);
- print "PUT %02x:=%s (0x%02x bytes)" % (reg,ashex,len(data))
+ if self.usbverbose: print "PUT %02x:=%s (0x%02x bytes)" % (reg,ashex,len(data))
self.writecmd(self.MAXUSBAPP,0x00,len(data),data);
def usb_connect(self):
"""Connect the USB port."""
for c in self.xfrdata[2:len(self.xfrdata)]:
if c>0: toret=toret+chr(c);
return toret;
+class GoodFETMAXUSBDevice(GoodFETMAXUSB):
+
+ def send_descriptor(self,SUD):
+ """Send the USB descriptors based upon the setup data."""
+ desclen=0;
+ reqlen=ord(SUD[wLengthL])+256*ord(SUD[wLengthH]); #16-bit length
+ desctype=ord(SUD[wValueH]);
+
+ if desctype==GD_DEVICE:
+ desclen=self.DD[0];
+ ddata=self.DD;
+ elif desctype==GD_CONFIGURATION:
+ desclen=self.CD[2];
+ ddata=self.CD;
+ elif desctype==GD_STRING:
+ desclen=ord(self.strDesc[ord(SUD[wValueL])][0]);
+ ddata=self.strDesc[ord(SUD[wValueL])];
+ elif desctype==GD_HID:
+ #Don't know how to do this yet.
+ pass;
+ elif desctype==GD_REPORT:
+ desclen=self.CD[25];
+ ddata=self.RepD;
+ #TODO Configuration, String, Hid, and Report
-class GoodFETMAXUSBHID(GoodFETMAXUSB):
+ if desclen>0:
+ #Reduce desclen if asked for fewer bytes.
+ desclen=min(reqlen,desclen);
+ #Send those bytes.
+ self.writebytes(rEP0FIFO,ddata[0:desclen]);
+ self.wregAS(rEP0BC,desclen);
+ else:
+ print "Stalling in send_descriptor() for lack of handler for %02x." % desctype;
+ self.STALL_EP0(SUD);
+ def set_configuration(self,SUD):
+ """Set the configuration."""
+ bmSUSPIE=0x10;
+ configval=ord(SUD[wValueL]);
+ if(configval>0):
+ self.SETBIT(rUSBIEN,bmSUSPIE);
+ self.rregAS(rFNADDR);
+class GoodFETMAXUSBHID(GoodFETMAXUSBDevice):
"""This is an example HID keyboard driver, loosely based on the
MAX3420 examples."""
def hidinit(self):
0x95,0x01, # Report Count = 1
0x81,0x00, # Input(Data,Variable,Array)
0xC0]
- def send_descriptor(self,SUD):
- """Send the USB descriptors based upon the setup data."""
- desclen=0;
- reqlen=ord(SUD[wLengthL])+256*ord(SUD[wLengthH]); #16-bit length
- desctype=ord(SUD[wValueH]);
-
- if desctype==GD_DEVICE:
- desclen=self.DD[0];
- ddata=self.DD;
- elif desctype==GD_CONFIGURATION:
- desclen=self.CD[2];
- ddata=self.CD;
- elif desctype==GD_STRING:
- desclen=self.strDesc[ord(SUD[wValueL])][0];
- ddata=self.strDesc[ord(SUD[wValueL])];
- elif desctype==GD_REPORT:
- desclen=self.CD[25];
- ddata=self.RepD;
-
- #TODO Configuration, String, Hid, and Report
-
- if desclen>0:
- sendlen=min(reqlen,desclen);
- self.writebytes(rEP0FIFO,ddata);
- self.wregAS(rEP0BC,sendlen);
- else:
- print "Stalling in send_descriptor() for lack of handler for %02x." % desctype;
- self.STALL_EP0(SUD);
- def set_configuration(self,SUD):
- """Set the configuration."""
- bmSUSPIE=0x10;
- configval=ord(SUD[wValueL]);
- if(configval>0):
- self.SETBIT(rUSBIEN,bmSUSPIE);
- self.rregAS(rFNADDR);
+
def get_status(self,SUD):
"""Get the USB Setup Status."""
testbyte=ord(SUD[bmRequestType])
projects / goodfet / blobdiff