class GoodFETMAXUSB(GoodFET):
MAXUSBAPP=0x40;
+ usbverbose=True;
+ def service_irqs(self):
+ """Handle USB interrupt events."""
+ epirq=self.rreg(rEPIRQ);
+ usbirq=self.rreg(rUSBIRQ);
+
+
+ #Are we being asked for setup data?
+ if(epirq&bmSUDAVIRQ): #Setup Data Requested
+ self.wreg(rEPIRQ,bmSUDAVIRQ); #Clear the bit
+ self.do_SETUP();
+ if(epirq&bmOUT1DAVIRQ): #OUT1-OUT packet
+ self.do_OUT1();
+ self.wreg(rEPIRQ,bmOUT1DAVIRQ); #Clear the bit *AFTER* servicing.
+ if(epirq&bmIN3BAVIRQ): #IN3-IN packet
+ self.do_IN3();
+ #self.wreg(rEPIRQ,bmIN3BAVIRQ); #Clear the bit
+ if(epirq&bmIN2BAVIRQ): #IN2 packet
+ self.do_IN2();
+ #self.wreg(rEPIRQ,bmIN2BAVIRQ); #Clear the bit
+ #else:
+ # print "No idea how to service this IRQ: %02x" % epirq;
+ def do_IN2(self):
+ """Overload this."""
+ def do_IN3(self):
+ """Overload this."""
+ def do_OUT1(self):
+ """Overload this."""
+ if self.usbverbose: print "Ignoring an OUT1 interrupt.";
def setup2str(self,SUD):
"""Converts the header of a setup packet to a string."""
return "bmRequestType=0x%02x, bRequest=0x%02x, wValue=0x%04x, wIndex=0x%04x, wLength=0x%04x" % (
ashex="";
for foo in toret:
ashex=ashex+(" %02x"%ord(foo));
- print "GET %02x==%s" % (reg,ashex);
+ if self.usbverbose: print "GET %02x==%s" % (reg,ashex);
return toret;
def readbytesAS(self,reg,length):
"""Peek some bytes from a register, acking prior transfer."""
ashex="";
for foo in toret:
ashex=ashex+(" %02x"%ord(foo));
- print "GET %02x==%s" % (reg,ashex);
+ if self.usbverbose: print "GETAS %02x==%s" % (reg,ashex);
return toret;
+ def fifo_ep3in_tx(self,data):
+ """Sends the data out of EP3 in 64-byte chunks."""
+ #Wait for the buffer to be free before starting.
+ while not(self.rreg(rEPIRQ)&bmIN3BAVIRQ): pass;
+
+ count=len(data);
+ pos=0;
+ while count>0:
+ #Send 64-byte chunks or the remainder.
+ c=min(count,64);
+ self.writebytes(rEP3INFIFO,
+ data[pos:pos+c]);
+ self.wregAS(rEP3INBC,c);
+ count=count-c;
+ pos=pos+c;
+
+ #Wait for the buffer to be free before continuing.
+ while not(self.rreg(rEPIRQ)&bmIN3BAVIRQ): pass;
+
+ return;
+
def ctl_write_nd(self,request):
"""Control Write with no data stage. Assumes PERADDR is set
and the SUDFIFO contains the 8 setup bytes. Returns with
data="";
if type(tosend)==str:
data=chr((reg<<3)|3)+tosend;
- print "PUT %02x:=%s (0x%02x bytes)" % (reg,tosend,len(data))
+ if self.usbverbose: print "PUT %02x:=%s (0x%02x bytes)" % (reg,tosend,len(data))
else:
data=[(reg<<3)|3]+tosend;
ashex="";
for foo in tosend:
ashex=ashex+(" %02x"%foo);
- print "PUT %02x:=%s (0x%02x bytes)" % (reg,ashex,len(data))
+ if self.usbverbose: print "PUT %02x:=%s (0x%02x bytes)" % (reg,ashex,len(data))
self.writecmd(self.MAXUSBAPP,0x00,len(data),data);
def usb_connect(self):
"""Connect the USB port."""
for c in self.xfrdata[2:len(self.xfrdata)]:
if c>0: toret=toret+chr(c);
return toret;
+class GoodFETMAXUSBDevice(GoodFETMAXUSB):
+
+ def send_descriptor(self,SUD):
+ """Send the USB descriptors based upon the setup data."""
+ desclen=0;
+ reqlen=ord(SUD[wLengthL])+256*ord(SUD[wLengthH]); #16-bit length
+ desctype=ord(SUD[wValueH]);
-class GoodFETMAXUSBHID(GoodFETMAXUSB):
+ if desctype==GD_DEVICE:
+ desclen=self.DD[0];
+ ddata=self.DD;
+ elif desctype==GD_CONFIGURATION:
+ desclen=self.CD[2];
+ ddata=self.CD;
+ elif desctype==GD_STRING:
+ desclen=ord(self.strDesc[ord(SUD[wValueL])][0]);
+ ddata=self.strDesc[ord(SUD[wValueL])];
+ elif desctype==GD_HID:
+ #Don't know how to do this yet.
+ pass;
+ elif desctype==GD_REPORT:
+ desclen=self.CD[25];
+ ddata=self.RepD;
+ #TODO Configuration, String, Hid, and Report
+
+ if desclen>0:
+ #Reduce desclen if asked for fewer bytes.
+ desclen=min(reqlen,desclen);
+ #Send those bytes.
+ self.writebytes(rEP0FIFO,ddata[0:desclen]);
+ self.wregAS(rEP0BC,desclen);
+ else:
+ print "Stalling in send_descriptor() for lack of handler for %02x." % desctype;
+ self.STALL_EP0(SUD);
+ def set_configuration(self,SUD):
+ """Set the configuration."""
+ bmSUSPIE=0x10;
+ configval=ord(SUD[wValueL]);
+ if(configval>0):
+ self.SETBIT(rUSBIEN,bmSUSPIE);
+ self.rregAS(rFNADDR);
+class GoodFETMAXUSBHID(GoodFETMAXUSBDevice):
"""This is an example HID keyboard driver, loosely based on the
MAX3420 examples."""
def hidinit(self):
"""Handles a standard setup request."""
setuptype=ord(SUD[bRequest]);
if setuptype==SR_GET_DESCRIPTOR: self.send_descriptor(SUD);
- #elif setuptype==SR_SET_FEATURE: self.feature(1);
+ #elif setuptype==SR_SET_FEATURE:
+ # self.rregAS(rFNADDR);
+ # # self.feature(1);
elif setuptype==SR_SET_CONFIGURATION: self.set_configuration(SUD);
elif setuptype==SR_GET_STATUS: self.get_status(SUD);
elif setuptype==SR_SET_ADDRESS: self.rregAS(rFNADDR);
elif setuptype==SR_GET_INTERFACE: self.get_interface(SUD);
else:
print "Stalling Unknown standard setup request type %02x" % setuptype;
-
self.STALL_EP0(SUD);
def get_interface(self,SUD):
# 'M',0,'a',0,'x',0,'i',0,'m',0 # text in Unicode
# ],
# STRING descriptor 2 - Product ID
-"\x18\x03M\x00A\x00X\x003\x004\x002\x000\x00E\x00 \x00%\x00s\x00%\x00n\x00 \x00C\x00o\x00d\x00e\x00",
+"\x18\x03M\x00A\x00X\x003\x004\x002\x000\x00E\x00 \x00E\x00n\x00u\x00m\x00 \x00C\x00o\x00d\x00e\x00",
# [ 24, # bLength
# 0x03, # bDescriptorType = string
# 'M',0,'A',0,'X',0,'3',0,'4',0,'2',0,'0',0,'E',0,' ',0,
0x95,0x01, # Report Count = 1
0x81,0x00, # Input(Data,Variable,Array)
0xC0]
- def send_descriptor(self,SUD):
- """Send the USB descriptors based upon the setup data."""
- desclen=0;
- reqlen=ord(SUD[wLengthL])+256*ord(SUD[wLengthH]); #16-bit length
- desctype=ord(SUD[wValueH]);
-
- if desctype==GD_DEVICE:
- desclen=self.DD[0];
- ddata=self.DD;
- elif desctype==GD_CONFIGURATION:
- desclen=self.CD[2];
- ddata=self.CD;
- elif desctype==GD_STRING:
- desclen=self.strDesc[ord(SUD[wValueL])][0];
- ddata=self.strDesc[ord(SUD[wValueL])];
- elif desctype==GD_REPORT:
- desclen=self.CD[25];
- ddata=self.RepD;
-
- #TODO Configuration, String, Hid, and Report
-
- if desclen>0:
- sendlen=min(reqlen,desclen);
- self.writebytes(rEP0FIFO,ddata);
- self.wregAS(rEP0BC,sendlen);
- else:
- print "Stalling in send_descriptor() for lack of handler for %02x." % desctype;
- self.STALL_EP0(SUD);
- def set_configuration(self,SUD):
- """Set the configuration."""
- bmSUSPIE=0x10;
- configval=ord(SUD[wValueL]);
- if(configval>0):
- self.SETBIT(rUSBIEN,bmSUSPIE);
- self.rregAS(rFNADDR);
+
def get_status(self,SUD):
"""Get the USB Setup Status."""
testbyte=ord(SUD[bmRequestType])
self.STALL_EP0(SUD);
else:
self.STALL_EP0(SUD);
- def service_irqs(self):
- """Handle USB interrupt events."""
-
- epirq=self.rreg(rEPIRQ);
- usbirq=self.rreg(rUSBIRQ);
-
- #Are we being asked for setup data?
- if(epirq&bmSUDAVIRQ): #Setup Data Requested
- self.wreg(rEPIRQ,bmSUDAVIRQ); #Clear the bit
- self.do_SETUP();
- if(epirq&bmIN3BAVIRQ): #EN3-IN packet
- self.do_IN3();
-
+
+
typephase=0;
typestring=" Python does USB HID!";
projects / goodfet / blobdiff