JTAGARM7 is back up and running, folks! Tested Halt/Release, Get/Set Registers,...
[goodfet] / client / GoodFETMCPCAN.py
index b75c034..7182d37 100644 (file)
@@ -30,10 +30,15 @@ class GoodFETMCPCAN(GoodFETSPI):
         
         # If we don't enable promiscous mode, we'll miss a lot of
         # packets.  It can be manually disabled later.
-        self.poke8(0x60,0xFF); #TODO Does this have any unpleasant side effects?
+        #self.poke8(0x60,0xFF); #TODO Does this have any unpleasant side effects?
+        self.poke8(0x60,0x66); #Wanted FF, but some bits are reserved.
         
-        #Set the default rate of 125kHz.
-        self.MCPsetrate(125);
+        #Set the default rate.
+        self.MCPsetrate();
+    
+    #Array of supported rates.
+    MCPrates=[83.3, 100, 125,
+              250, 500, 1000];
     
     def MCPsetrate(self,rate=125):
         """Sets the data rate in kHz."""
@@ -72,25 +77,35 @@ class GoodFETMCPCAN(GoodFETSPI):
         #           );
         
         
-        #These are the new examples.
+        print "Setting rate of %i kHz." % rate;
         
+        #These are the new examples.
         if rate==125:
             #125 kHz, 16 TQ, not quite as worked out above.
             CNF1=0x04;
             CNF2=0xB8;
             CNF3=0x05;
-        elif rate==500:
-            #500 kHz, 20 TQ
-            CNF1=0x00;
-            CNF2=0xBA;
-            CNF3=0x07;
-            pass;
         elif rate==100:
             #100 kHz, 20 TQ
             CNF1=0x04;
             CNF2=0xBA;
             CNF3=0x07;
-            pass;
+        elif rate>83 and rate<83.5:
+            #83+1/3 kHz, 8 TQ
+            # 0.04% error from 83.30
+            CNF1=0x0E;
+            CNF2=0x90;
+            CNF3=0x02;
+        elif rate==250:
+            #256 kHz, 20 TQ
+            CNF1=0x01;
+            CNF2=0xBA;
+            CNF3=0x07;
+        elif rate==500:
+            #500 kHz, 20 TQ
+            CNF1=0x00;
+            CNF2=0xBA;
+            CNF3=0x07;
         elif rate==1000:
             #1,000 kHz, 10 TQ
             CNF1=0x00;
@@ -98,7 +113,7 @@ class GoodFETMCPCAN(GoodFETSPI):
             CNF3=0x02;
             print "WARNING: Because of chip errata, this probably won't work."
         else:
-            print "Given unsupported rate of %i kHz.";
+            print "Given unsupported rate of %i kHz." % rate;
             print "Defaulting to 125kHz.";
             CNF1=0x04;
             CNF2=0xB8;
@@ -210,4 +225,8 @@ class GoodFETMCPCAN(GoodFETSPI):
     def poke8(self,adr,val):
         """Poke a value into RAM.  Untested"""
         self.SPItrans([0x02,adr&0xFF,val&0xFF]);
+        newval=self.peek8(adr);
+        if newval!=val:
+            print "Failed to poke %02x to %02x.  Got %02x." % (adr,val,newval);
+            print "Are you not in idle mode?";
         return val;