Standardizing Chipcon interface, bringing it into line with the NRF code.
[goodfet] / client / GoodFETNRF.py
index 74be559..3c780a5 100644 (file)
@@ -40,14 +40,22 @@ class GoodFETNRF(GoodFET):
         for i in range(0,bytes):
             toret=toret|(ord(self.data[i+1])<<(8*i));
         return toret;
-    def poke(self,reg,val,bytes=1):
+    def poke(self,reg,val,bytes=-1):
         """Write an NRF Register."""
         data=[reg];
+        
+        #Automatically calibrate the len.
+        if bytes==-1:
+            bytes=1;
+            if reg==0x0a or reg==0x0b or reg==0x10: bytes=5;
+        
         for i in range(0,bytes):
             data=data+[(val>>(8*i))&0xFF];
         self.writecmd(self.NRFAPP,0x03,len(data),data);
         if self.peek(reg,bytes)!=val and reg!=0x07:
-            print "Warning, failed to set register %02x." %reg;
+            print "Warning, failed to set r%02x=%02x, got %02x." %(reg,
+                                                                 val,
+                                                                 self.peek(reg,bytes));
         return;
     
     def status(self):
@@ -56,6 +64,34 @@ class GoodFETNRF(GoodFET):
         print "Status=%02x" % status;
     
     #Radio stuff begins here.
+    def RF_setenc(self,code="GFSK"):
+        """Set the encoding type."""
+        if code!=GFSK:
+            return "%s not supported by the NRF24L01.  Try GFSK."
+        return;
+    def RF_getenc(self):
+        """Get the encoding type."""
+        return "GFSK";
+    def RF_getrate(self):
+        rate=self.peek(0x06)&0x28;
+        if rate==0x28:
+            rate=250*10**3; #256kbps
+        elif rate==0x08:
+            rate=2*10**6;  #2Mbps
+        elif rate==0x00: 
+            rate=1*10**6;  #1Mbps
+        return rate;
+    def RF_setrate(self,rate=2*10**6):
+        r6=self.peek(0x06); #RF_SETUP register
+        r6=r6&(~0x28);   #Clear rate fields.
+        if rate==2*10**6:
+            r6=r6|0x08;
+        elif rate==1*10**6:
+            r6=r6;
+        elif rate==250*10**3:
+            r6=r6|0x20;
+        print "Setting r6=%02x." % r6;
+        self.poke(0x06,r6); #Write new rate.
     def RF_setfreq(self,frequency):
         """Set the frequency in Hz."""
         
@@ -64,6 +100,8 @@ class GoodFETNRF(GoodFET):
         
         chan=frequency/1000000-2400;
         self.poke(0x05,chan);
+
+
     def RF_getfreq(self):
         """Get the frequency in Hz."""
         
@@ -109,6 +147,24 @@ class GoodFETNRF(GoodFET):
             self.writecmd(self.NRFAPP,0x82,0,None); #Flush
             self.poke(0x07,0x40);#clear bit.
         return None;
+    def RF_txpacket(self,payload):
+        """Transmit a packet.  Untested."""
+        if self.peek(0x07) & 0x40:
+            #Packet has arrived.
+            self.writecmd(self.NRFAPP,0x81,0,None); #RX Packet
+            data=self.data;
+            self.poke(0x07,0x40);#clear bit.
+            return data;
+        elif self.peek(0x07)==0:
+            self.writecmd(self.NRFAPP,0x83,0,None); #Flush
+            self.poke(0x07,0x40);#clear bit.
+        return None;
+
+    def RF_carrier(self):
+        """Hold a carrier wave on the present frequency."""
+        # Set CONT_WAVE, PLL_LOCK, and 0dBm in RF_SETUP            
+        self.poke(0x06,8+10+4+2); 
+    
     packetlen=16;
     def RF_setpacketlen(self,len=16):
         """Set the number of bytes in the expected payload."""
@@ -122,7 +178,7 @@ class GoodFETNRF(GoodFET):
     maclen=5;
     def RF_getmaclen(self):
         """Get the number of bytes in the MAC address."""
-        choices=["illegal", 3, 4, 5];
+        choices=[0, 3, 4, 5];
         choice=self.peek(0x03)&3;
         self.maclen=choices[choice];
         return self.maclen;