class GoodFETMAXUSBMass(GoodFETMAXUSBDevice):
"""This emulates a USB Mass Storage device."""
+ #Too much data to watch everything.
+ usbverbose=False;
+
def getSectorData(self,lba):
"""Overload this to return data from a given 512-byte sector."""
print "You forgot to overload getSectorData(). Returning something neighborly.";
return sector;
def putSectorData(self,lba,block):
"""Overload this to write data to a given 512-byte sector."""
-
+ print "You forgot to overload putSectorData(). Ignoring sector write.";
return;
+ def getSectorCount(self):
+ """Returns the number of viable Logical Block Addresses."""
+ print "You forgot to overload getSectorCount(). Guessing 0x200.";
+ return 0x200;
+
def massinit(self):
"""Initialize a USB Mass Storage device."""
self.usb_disconnect();
def massrun(self):
"""Main loop of the USB Mass Storage emulator."""
- print "Starting a Mass Storage device. This doesn't work yet.";
+ print "Starting a Mass Storage device.";
while 1:
+ sys.stdout.flush();
self.service_irqs();
def do_SETUP(self):
"""Handle USB Enumeration"""
def do_OUT1(self):
"""Handle an OUT1 output event."""
- print "Got an output event, printing the result.";
l=self.rreg(rEP1OUTBC);
frame=self.readbytes(rEP1OUTFIFO,l);
self.handleCBW(frame);
def handleCB(self,cb,cblen,dtlen,dtdir):
"""Handles a command block, then replies with a CSW."""
- print "\nGot command block 0x%02x, requesting 0x%02x bytes" % (
- ord(cb[0]), dtlen);
+ if self.usbverbose:
+ print "Got command block, type 0x%02x requesting 0x%02x bytes" % (
+ ord(cb[0]), dtlen);
verb=ord(cb[0]);
status=00; #good, set to 1 for bad.
if verb==0x00: # Test Unit Ready
elif verb==0x23: #Read Format Capacity
response=[
0x00, 0,0x00,0x08, #Capacity list length.
- 0,0x00,x10,0x00, # Number of sectors, implying 10MB.
+ 0,0x00,0x10,0x00, # Number of sectors, implying 10MB.
0x01,0x00, #reserved/desciptor code.
0x02,0x00 # 512 bytes/sector. Why is this twice?
];
self.wregAS(rEP3INBC,
len(response));
elif verb==0x25: #Read Capacity
+ lastlba=self.getSectorCount();
response=[
- 0x00, 0,0x0f,0xFF, # Last LBA; might have endianness backward.
+ #0x00, 0, 0x0f, 0xFF, # Last LBA
+ (lastlba>>24)&0xFF, (lastlba>>16)&0xFF, (lastlba>>8)&0xFF, lastlba&0xFF, # Last LBA
0x00,0x00,0x02,0x00 # Block length of 512 bytes.
];
self.writebytes(rEP3INFIFO,
);
count=dtlen/512;
print "Fetching %i blocks starting at LBA %i." % (count,baselba);
+ if count>32:
+ count=0;
+ status=1; #Fail if we're asked to read more than 32 blocks.
+ #Now we need to stall EP3. It's not acceptable to just forget to transmit.
+ self.wreg(rEPSTALLS,0x10);
for i in range(0,count):
- data=self.getSectorData(baselba+count);
+ data=self.getSectorData(baselba+i);
for j in range(0,8):
- print "Sending block fragment %i,%i" % (i,j);
+ #print "Sending block fragment %i,%i" % (i,j);
#Transmit each 64-byte block fragment, then wait for next.
while not(self.rreg(rEPIRQ)&bmIN3BAVIRQ): pass;
response=data[j*64:j*64+64];
#sys.exit();
elif verb==0x2A: #WRITE SECTOR
print "Haven't implemented WRITE SECTOR.";
- sys.exit();
+ #sys.exit();
else:
print "ERROR: Unknown SCSI command block verb %02x." % verb;
status=1; #Command Failed
return;
+
+class GoodFETMAXUSBMassFile(GoodFETMAXUSBMass):
+ """This emulates a USB Mass Storage Device, providing a file as
+ its image. Writes are not yet supported, and this is very slow.
+ Performance hacks will come after the code stabilizes."""
+
+ datafile=None;
+ datafilelen=None;
+ def openImage(self,filename):
+ """Opens an image for use. Call this *before* massinit()."""
+ self.datafile=open(filename,"rb");
+ print "Opened an image with %i blocks." % self.getSectorCount();
+ def putSectorData(self,lba,block):
+ """Writes a 512-byte sector to the lba address."""
+ print "Writes aren't yet supported.";
+ return;
+
+ def getSectorData(self,lba):
+ """Returns data from a 512-byte sector."""
+ toret="";
+
+ #Seek to the appropraite block.
+ #print "Seeking to position %i"% (lba*512)
+ self.datafile.seek(lba*512,0);
+ pos=self.datafile.tell();
+ if pos!=lba*512:
+ print "SEEK ERROR: Seeked to %i (lba=%i), but now I'm at %i (lba=%i)" % (
+ lba*512,lba,
+ pos,pos/512);
+ #sys.exit();
+
+ #Dump the data out, assuming no blocking and filling with nonsense.
+ toret=self.datafile.read(512);
+ if len(toret)<512:
+ print "Holy hell, I only have %i bytes of 512." % len(toret);
+
+ toretbytes=range(0,len(toret));
+ for b in range(0,len(toret)): toretbytes[b]=ord(toret[b]);
+ return toretbytes;
+
+ def getSectorCount(self):
+ """Returns the number of viable Logical Block Addresses."""
+
+ # Python must have a better way to read a file length, but for
+ # now we just read the whole damned thing and then throw it
+ # away. With present performance, we can't read anything
+ # large enough for this to be a problem.
+ if self.datafilelen==None:
+ self.datafile.seek(0);
+ self.datafilelen=len(self.datafile.read());
+ if self.datafilelen%512!=0:
+ print "ERROR: Image does not have an integer number of blocks!"
+ print "%i \% 512 == %i" % (self.datafilelen,
+ self.datafilelen%512);
+ sys.exit();
+ return self.datafilelen/512-1;
+if(len(sys.argv)==1):
+ print "Usage: %s disk.img\n" % sys.argv[0];
+ sys.exit();
+
+
#Initialize FET and set baud rate
-client=GoodFETMAXUSBMass();
+client=GoodFETMAXUSBMassFile();
client.serInit()
+client.openImage(sys.argv[1]);
+
client.MAXUSBsetup();
client.massinit();
projects / goodfet / blobdiff