from GoodFETMAXUSB import *;
+def zeros(length):
+ """Returns a list of zeroes of the specified length."""
+ l=range(0,length);
+ for foo in l:
+ l[foo]=0;
+ return l;
+
class GoodFETMAXUSBMass(GoodFETMAXUSBDevice):
"""This emulates a USB Mass Storage device."""
+
+ #Too much data to watch everything.
+ usbverbose=False;
+
+ def getSectorData(self,lba):
+ """Overload this to return data from a given 512-byte sector."""
+ print "You forgot to overload getSectorData(). Returning something neighborly.";
+ sector=[
+ 0xE9, 0x86, 0x00, 0x0A, 0x47, 0x6F, 0x6F, 0x64, 0x44, 0x69, 0x73, 0x6B, 0x20, 0x30, 0x2E, 0x30,
+ 0x31, 0x0A, 0x0D, 0x62, 0x79, 0x20, 0x54, 0x72, 0x61, 0x76, 0x69, 0x73, 0x20, 0x47, 0x6F, 0x6F,
+ 0x64, 0x73, 0x70, 0x65, 0x65, 0x64, 0x0A, 0x0A, 0x0D, 0x00, 0x59, 0x6F, 0x75, 0x20, 0x68, 0x61,
+ 0x76, 0x65, 0x20, 0x62, 0x65, 0x65, 0x6E, 0x20, 0x65, 0x61, 0x74, 0x65, 0x6E, 0x20, 0x62, 0x79,
+ 0x20, 0x61, 0x20, 0x67, 0x72, 0x75, 0x65, 0x2E, 0x20, 0x20, 0x53, 0x6F, 0x72, 0x72, 0x79, 0x2E,
+ 0x0A, 0x0D, 0x00, 0x31, 0x29, 0x20, 0x52, 0x65, 0x61, 0x64, 0x69, 0x6E, 0x67, 0x20, 0x6B, 0x65,
+ 0x72, 0x6E, 0x65, 0x6C, 0x20, 0x66, 0x72, 0x6F, 0x6D, 0x20, 0x64, 0x69, 0x73, 0x6B, 0x2E, 0x0A,
+ 0x0D, 0x00, 0x32, 0x29, 0x20, 0x45, 0x78, 0x65, 0x63, 0x75, 0x74, 0x69, 0x6E, 0x67, 0x20, 0x6B,
+ 0x65, 0x72, 0x6E, 0x65, 0x6C, 0x2E, 0x0A, 0x0D, 0x00, 0xBE, 0x03, 0x7C, 0xE8, 0x41, 0x00, 0xE8,
+ 0x7B, 0x00, 0x31, 0xC0, 0x30, 0xD2, 0xCD, 0x13, 0x0F, 0x82, 0xE8, 0x00, 0xBE, 0x53, 0x7C, 0xE8,
+ 0x2E, 0x00, 0xB8, 0xE0, 0x07, 0x8E, 0xC0, 0x31, 0xDB, 0xB8, 0x10, 0x02, 0xB5, 0x00, 0xB1, 0x02,
+ 0xB6, 0x00, 0xB2, 0x00, 0xCD, 0x13, 0x0F, 0x82, 0xCA, 0x00, 0xB8, 0x00, 0x7E, 0x89, 0xC6, 0xE8,
+ 0x7C, 0x00, 0xBE, 0x72, 0x7C, 0xE8, 0x08, 0x00, 0xEA, 0x00, 0x00, 0xE0, 0x07, 0xE8, 0xB4, 0x00,
+ 0xAC, 0x3C, 0x00, 0x74, 0x06, 0xB4, 0x0E, 0xCD, 0x10, 0xEB, 0xF5, 0xC3, 0x30, 0x78, 0x00, 0x20,
+ 0x62, 0x79, 0x74, 0x65, 0x73, 0x20, 0x6F, 0x66, 0x20, 0x6D, 0x65, 0x6D, 0x6F, 0x72, 0x79, 0x20,
+ 0x64, 0x65, 0x74, 0x65, 0x63, 0x74, 0x65, 0x64, 0x2E, 0x0A, 0x0D, 0x00, 0x53, 0x65, 0x67, 0x6D,
+ 0x65, 0x6E, 0x74, 0x73, 0x3A, 0x20, 0x00, 0x2C, 0x20, 0x00, 0x0A, 0x0D, 0x00, 0xBE, 0xDC, 0x7C,
+ 0xE8, 0xBD, 0xFF, 0xE8, 0x63, 0x00, 0xE8, 0x07, 0x00, 0xBE, 0xDF, 0x7C, 0xE8, 0xB1, 0xFF, 0xC3,
+ 0x89, 0xC3, 0xC1, 0xE8, 0x0C, 0xE8, 0x39, 0x00, 0x89, 0xD8, 0xC1, 0xE8, 0x08, 0xE8, 0x31, 0x00,
+ 0x89, 0xD8, 0xC1, 0xE8, 0x04, 0xE8, 0x29, 0x00, 0x89, 0xD8, 0xE8, 0x24, 0x00, 0xC3, 0x31, 0xC9,
+ 0xAD, 0xE8, 0xDC, 0xFF, 0xE8, 0x2C, 0x00, 0x83, 0xC1, 0x02, 0x81, 0xF9, 0x00, 0x02, 0x75, 0xF0,
+ 0xC3, 0x30, 0x31, 0x32, 0x33, 0x34, 0x35, 0x36, 0x37, 0x38, 0x39, 0x41, 0x42, 0x43, 0x44, 0x45,
+ 0x46, 0x50, 0x56, 0x83, 0xE0, 0x0F, 0x05, 0x51, 0x7D, 0x89, 0xC6, 0xAC, 0xB4, 0x0E, 0xCD, 0x10,
+ 0x5E, 0x58, 0xC3, 0xB8, 0x20, 0x0E, 0xCD, 0x10, 0xC3, 0x31, 0xC0, 0xCD, 0x12, 0x72, 0x05, 0x85,
+ 0xC0, 0x74, 0x01, 0xC3, 0xBE, 0x2A, 0x7C, 0xE8, 0x46, 0xFF, 0xEB, 0xFE, 0xEA, 0x00, 0x00, 0xFF,
+ 0xFF, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x55, 0xAA
+ ];
+ return sector;
+ def putSectorData(self,lba,block):
+ """Overload this to write data to a given 512-byte sector."""
+ print "You forgot to overload putSectorData(). Ignoring sector write.";
+ return;
+
+ def getSectorCount(self):
+ """Returns the number of viable Logical Block Addresses."""
+ print "You forgot to overload getSectorCount(). Guessing 0x200.";
+ return 0x200;
+
def massinit(self):
"""Initialize a USB Mass Storage device."""
self.usb_disconnect();
def massrun(self):
"""Main loop of the USB Mass Storage emulator."""
- print "Starting a Mass Storage device. This doesn't work yet.";
+ print "Starting a Mass Storage device.";
while 1:
+ sys.stdout.flush();
self.service_irqs();
def do_SETUP(self):
"""Handle USB Enumeration"""
def do_OUT1(self):
"""Handle an OUT1 output event."""
- print "Got an output event, printing the result.";
l=self.rreg(rEP1OUTBC);
frame=self.readbytes(rEP1OUTFIFO,l);
self.handleCBW(frame);
def handleCB(self,cb,cblen,dtlen,dtdir):
"""Handles a command block, then replies with a CSW."""
- print "\nGot command block 0x%02x, requesting 0x%02x bytes" % (
- ord(cb[0]), dtlen);
+ if self.usbverbose:
+ print "Got command block, type 0x%02x requesting 0x%02x bytes" % (
+ ord(cb[0]), dtlen);
verb=ord(cb[0]);
status=00; #good, set to 1 for bad.
if verb==0x00: # Test Unit Ready
status=0x00;
elif verb==0x1A: #Mode Sense (6)
# I should probably send six bytes here.
+ print "Mode Sense (6) requesting %i byte Page Code %02x" % (
+ dtlen,ord(cb[2])&0x3F);
+ #This is completely wrong.
response=[0x12,0,0,0, 0,0,0,0x1C];
- self.writebytes(rEP3INFIFO,
- response);
- self.wregAS(rEP3INBC,
- len(response));
+ self.fifo_ep3in_tx(response);
+ elif verb==0x5A: #Mode Sense (10)
+ # I should probably send ten bytes here.
+ print "Mode Sense (10) requesting %i byte Page Code %02x" % (
+ dtlen,ord(cb[2])&0x3F);
+ #This is completely wrong.
+ response=[0x12,0x00,0,0, 0,0,0,0x1C]
+ self.fifo_ep3in_tx(response);
elif verb==0x23: #Read Format Capacity
response=[
0x00, 0,0x00,0x08, #Capacity list length.
- 0,0x00,x10,0x00, # Number of sectors, implying 10MB.
+ 0,0x00,0x10,0x00, # Number of sectors, implying 10MB.
0x01,0x00, #reserved/desciptor code.
0x02,0x00 # 512 bytes/sector. Why is this twice?
];
self.wregAS(rEP3INBC,
len(response));
elif verb==0x25: #Read Capacity
+ lastlba=self.getSectorCount();
response=[
- 0x00, 0,0x0f,0xFF, # Last LBA; might have endianness backward.
+ #0x00, 0, 0x0f, 0xFF, # Last LBA
+ (lastlba>>24)&0xFF, (lastlba>>16)&0xFF, (lastlba>>8)&0xFF, lastlba&0xFF, # Last LBA
0x00,0x00,0x02,0x00 # Block length of 512 bytes.
];
self.writebytes(rEP3INFIFO,
self.wregAS(rEP3INBC,
len(response));
elif verb==0x28: #READ SECTOR
- print "Haven't implemented READ SECTOR.";
- sys.exit();
+ cbw=self.lastCBW;
+ baselba=(
+ ord(cbw[20]) |
+ (ord(cbw[19])<<8) |
+ (ord(cbw[18])<<16) |
+ (ord(cbw[17])<<24)
+ );
+ count=dtlen/512;
+ print "Fetching %i blocks starting at LBA %i." % (count,baselba);
+ if count>32:
+ count=0;
+ status=1; #Fail if we're asked to read more than 32 blocks.
+ #Now we need to stall EP3. It's not acceptable to just forget to transmit.
+ self.wreg(rEPSTALLS,0x10);
+ for i in range(0,count):
+ data=self.getSectorData(baselba+i);
+ for j in range(0,8):
+ #print "Sending block fragment %i,%i" % (i,j);
+ #Transmit each 64-byte block fragment, then wait for next.
+ while not(self.rreg(rEPIRQ)&bmIN3BAVIRQ): pass;
+ response=data[j*64:j*64+64];
+ self.writebytes(rEP3INFIFO,
+ response);
+ self.wregAS(rEP3INBC,
+ 64);
+ #sys.exit();
elif verb==0x2A: #WRITE SECTOR
print "Haven't implemented WRITE SECTOR.";
- sys.exit();
+ #sys.exit();
else:
print "ERROR: Unknown SCSI command block verb %02x." % verb;
status=1; #Command Failed
if dtlen>0:
- print "Perhaps I should send %i bytes of dummy data here." % dtlen;
- sys.exit(1);
+ print "Sending %i bytes of dummy data here." % dtlen;
+ self.fifo_ep3in_tx(zeros(dtlen));
+ #sys.exit(1);
cbw=self.lastCBW;
#Now we need to send the CSW.
return;
+
+class GoodFETMAXUSBMassFile(GoodFETMAXUSBMass):
+ """This emulates a USB Mass Storage Device, providing a file as
+ its image. Writes are not yet supported, and this is very slow.
+ Performance hacks will come after the code stabilizes."""
+
+ datafile=None;
+ datafilelen=None;
+ def openImage(self,filename):
+ """Opens an image for use. Call this *before* massinit()."""
+ self.datafile=open(filename,"rb");
+ print "Opened an image with %i blocks." % self.getSectorCount();
+ def putSectorData(self,lba,block):
+ """Writes a 512-byte sector to the lba address."""
+ print "Writes aren't yet supported.";
+ return;
+
+ def getSectorData(self,lba):
+ """Returns data from a 512-byte sector."""
+ toret="";
+
+ #Seek to the appropraite block.
+ #print "Seeking to position %i"% (lba*512)
+ self.datafile.seek(lba*512,0);
+ pos=self.datafile.tell();
+ if pos!=lba*512:
+ print "SEEK ERROR: Seeked to %i (lba=%i), but now I'm at %i (lba=%i)" % (
+ lba*512,lba,
+ pos,pos/512);
+ #sys.exit();
+
+ #Dump the data out, assuming no blocking and filling with nonsense.
+ toret=self.datafile.read(512);
+ if len(toret)<512:
+ print "Holy hell, I only have %i bytes of 512." % len(toret);
+
+ toretbytes=range(0,len(toret));
+ for b in range(0,len(toret)): toretbytes[b]=ord(toret[b]);
+ return toretbytes;
+
+ def getSectorCount(self):
+ """Returns the number of viable Logical Block Addresses."""
+
+ # Python must have a better way to read a file length, but for
+ # now we just read the whole damned thing and then throw it
+ # away. With present performance, we can't read anything
+ # large enough for this to be a problem.
+ if self.datafilelen==None:
+ self.datafile.seek(0);
+ self.datafilelen=len(self.datafile.read());
+ if self.datafilelen%512!=0:
+ print "ERROR: Image does not have an integer number of blocks!"
+ print "%i \% 512 == %i" % (self.datafilelen,
+ self.datafilelen%512);
+ sys.exit();
+ return self.datafilelen/512-1;
+if(len(sys.argv)==1):
+ print "Usage: %s disk.img\n" % sys.argv[0];
+ sys.exit();
+
+
#Initialize FET and set baud rate
-client=GoodFETMAXUSBMass();
+client=GoodFETMAXUSBMassFile();
client.serInit()
+client.openImage(sys.argv[1]);
+
client.MAXUSBsetup();
client.massinit();
projects / goodfet / blobdiff