TI Launchpad patch from Peter Lorenzen, edited to ease the mergequake.

[goodfet] / firmware / Makefile

diff --git a/firmware/Makefile b/firmware/Makefile
index 11eaddb..3dcd605 100644 (file)
--- a/firmware/Makefile
+++ b/firmware/Makefile
@@ -1,31 +1,46 @@
 
+
+#platform?=goodfet
+#platform?=telosb
+#platform?=z1
+#platform?=nhbadge
+#platform?=nhbadgeb
+#platofrm?=arduino
+#platform?=tilaunchpad
+platform?=goodfet
+
+
+ifeq ($(platform),tilaunchpad)
+mcu?=msp430x1612
+CFLAGS+=-DDEBUG_LEVEL=3 -DDEBUG_START=1 -DINBAND_DEBUG
+#CFLAGS+= -Werror
+endif
+
 #include `uname`.mak
-GOODFET?=/dev/ttyUSB0
+GOODFET?=/dev/tty.usbser*
 
+#For Arduino,
+#BSL?=avrdude -V -F -c stk500v1 -p m328p -b 57600 -P /dev/tty.usbserial-* -U flash:w:blink.hex
 #For tos-bsl, use --invert-reset --invert-test
-BSL?=goodfet.bsl --speed=38400
+MSP430BSL?=goodfet.bsl --speed=38400
+JTAG=msp430-jtag
 
 #One of these should be defined explicitly.
 #Default removed because of confusion.
 
-#mcu?=msp430x2274
 #mcu?=msp430x2618
 #mcu?=msp430x1612
+#mcu?=atmega168
 mcu?=RUNCONFIG
 
-#platform=goodfet
-#platform=telosb
-#platform=z1
-#platform=nhbadge
-#platform=nhbadgeb
-platform?=goodfet
 
 #N.B., gcc WILL NOT BITCH if this file doesn't exist.
-#GCCINC=-T ldscripts/161x.x
-GCCINC=-T ldscripts/$(mcu).x
+GCCINC?=
+
+#GCC?=avr-gcc
+GCC?=msp430-gcc -T ldscripts/$(mcu).x
 
-CCEXTRA?=  -D$(mcu) -D$(platform) -Dplatform=$(platform) -DGCC $(GCCINC) -I include -I platforms
-GCC?=msp430-gcc
+CCEXTRA?=  $(CFLAGS) -D$(mcu) -D$(platform) -Dplatform=$(platform) -DGCC $(GCCINC) -I include -I platforms
 CC=$(GCC) -Wall -Os -fno-strict-aliasing -g -mmcu=$(mcu)  $(CCEXTRA)
 
 # Available Applications
@@ -98,11 +113,22 @@ CC=$(GCC) -Wall -Os -fno-strict-aliasing -g -mmcu=$(mcu)  $(CCEXTRA)
 # config = monitor sbw  chipcon nrf ccspi spi jtagarm7 jtag430 jtag430x2 avr
 
 # New default.
+ifeq ($(platform),tilaunchpad)
+config ?= monitor chipcon i2c
+else
 config ?= monitor chipcon spi jtag430 jtag430x2 avr openocd ccspi
+endif
 
 # Build the needed list of app and lib object files from the config
 apps= 
-libs= lib/$(mcu).o lib/command.o lib/dco_calib.o lib/apps.o
+
+ifeq ($(platform),tilaunchpad)
+libs= lib/$(platform).o lib/command.o lib/apps.o lib/msp430_serial.o
+#libs+=lib/setjmp.o 
+else
+libs= lib/$(mcu).o lib/command.o lib/dco_calib.o lib/apps.o lib/msp430.o lib/arduino.o
+endif
+
 hdrs=
 ERR=
 
@@ -315,22 +341,35 @@ goodfet.hex: goodfet
 run:
        ../client/goodfet.msp430 test
 
+avrinstall: $(app).hex
+       #to be merged
+       avrdude -V -F -c stk500v1 -p m328p -b 57600 -P $(GOODFET) -U flash:w:$(app).hex
+
+ifeq ($(platform),tilaunchpad)
 install: $(app).hex
-       $(BSL) -e -p $(app).hex 
+       $(JTAG) -e -p $(app).hex
+verify:
+       $(JTAG) -v $(app).hex
+erase:
+       $(JTAG) -e $(app).hex
+else
+install: $(app).hex
+       $(MSP430BSL) -e -p $(app).hex 
 installinfo:
-       $(BSL) -P $(app).hex -p info.txt || true  #MSP430F2xx targets only, inelegant.
+       $(MSP430BSL) -P $(app).hex -p info.txt || true  #MSP430F2xx targets only, inelegant.
 verify:
-       $(BSL) -P $(app).hex -v $(app).hex
+       $(MSP430BSL) -P $(app).hex -v $(app).hex
+endif
 dumpinfo:
-       $(BSL) --dumpinfo
+       $(MSP430BSL) --dumpinfo
+erase:
+       $(MSP430BSL) -e 
 $(app).c: config builddate appsfiles err
 $(app): $(libs) $(apps)
 $(app).hex: $(app)
        msp430-objcopy goodfet -O ihex goodfet.hex
 m4s: $(app).hex
        msp430-objdump -D -m msp430 $(app).hex | m4s init
-erase:
-       $(BSL) -e 
 clean:
        rm -f $(app) $(app).hex $(libs) $(apps) lib/apps.c include/config.h include/builddate.h include/apps.h
 docs: