TI Launchpad patch from Peter Lorenzen, edited to ease the mergequake.

[goodfet] / firmware / Makefile

diff --git a/firmware/Makefile b/firmware/Makefile
index 42adfc2..3dcd605 100644 (file)
--- a/firmware/Makefile
+++ b/firmware/Makefile
@@ -1,29 +1,47 @@
 
+
+#platform?=goodfet
+#platform?=telosb
+#platform?=z1
+#platform?=nhbadge
+#platform?=nhbadgeb
+#platofrm?=arduino
+#platform?=tilaunchpad
+platform?=goodfet
+
+
+ifeq ($(platform),tilaunchpad)
+mcu?=msp430x1612
+CFLAGS+=-DDEBUG_LEVEL=3 -DDEBUG_START=1 -DINBAND_DEBUG
+#CFLAGS+= -Werror
+endif
+
 #include `uname`.mak
-#GOODFET?=/dev/ttyUSB0
+GOODFET?=/dev/tty.usbser*
 
+#For Arduino,
+#BSL?=avrdude -V -F -c stk500v1 -p m328p -b 57600 -P /dev/tty.usbserial-* -U flash:w:blink.hex
 #For tos-bsl, use --invert-reset --invert-test
-BSL?=goodfet.bsl --speed=38400
+MSP430BSL?=goodfet.bsl --speed=38400
+JTAG=msp430-jtag
 
 #One of these should be defined explicitly.
 #Default removed because of confusion.
 
-#mcu=msp430x2274
-#mcu=msp430x2618
+#mcu?=msp430x2618
 #mcu?=msp430x1612
+#mcu?=atmega168
 mcu?=RUNCONFIG
 
-#platform=goodfet
-#platform=telosb
-#platform=z1
-platform?=goodfet
 
 #N.B., gcc WILL NOT BITCH if this file doesn't exist.
-#GCCINC=-T ldscripts/161x.x
-GCCINC=-T ldscripts/$(mcu).x
+GCCINC?=
 
-CCEXTRA?=
-CC=msp430-gcc -Wall -Os -g -mmcu=$(mcu) -D$(mcu) -D$(platform) -Dplatform=$(platform) -DGCC $(GCCINC) -I include $(CCEXTRA)
+#GCC?=avr-gcc
+GCC?=msp430-gcc -T ldscripts/$(mcu).x
+
+CCEXTRA?=  $(CFLAGS) -D$(mcu) -D$(platform) -Dplatform=$(platform) -DGCC $(GCCINC) -I include -I platforms
+CC=$(GCC) -Wall -Os -fno-strict-aliasing -g -mmcu=$(mcu)  $(CCEXTRA)
 
 # Available Applications
 # ======================
@@ -48,6 +66,7 @@ CC=msp430-gcc -Wall -Os -g -mmcu=$(mcu) -D$(mcu) -D$(platform) -Dplatform=$(plat
 # jtagarm7 -- ARM7TDMI JTAG
 # ejtag -- MIPS JTAG
 # jtagxscale -- XScale JTAG
+# openocd -- OpenOCD bitbang device
 
 #  Microcontrollers:
 # chipcon -- Chipcon radio 8051 debugging
@@ -85,15 +104,31 @@ CC=msp430-gcc -Wall -Os -g -mmcu=$(mcu) -D$(mcu) -D$(platform) -Dplatform=$(plat
 # config = monitor glitch
 
 # XScale PXA255 JTAG
-config = monitor jtagxscale
+# config = monitor jtagxscale
+
+# OpenOCD bit-bang device
+#config = monitor openocd
 
 # Old Default Config
-#config = monitor sbw glitch chipcon nrf ccspi spi jtagarm7 jtag430 jtag430x2 avr
+# config = monitor sbw  chipcon nrf ccspi spi jtagarm7 jtag430 jtag430x2 avr
 
+# New default.
+ifeq ($(platform),tilaunchpad)
+config ?= monitor chipcon i2c
+else
+config ?= monitor chipcon spi jtag430 jtag430x2 avr openocd ccspi
+endif
 
 # Build the needed list of app and lib object files from the config
 apps= 
-libs= lib/$(mcu).o lib/command.o lib/dco_calib.o lib/apps.o
+
+ifeq ($(platform),tilaunchpad)
+libs= lib/$(platform).o lib/command.o lib/apps.o lib/msp430_serial.o
+#libs+=lib/setjmp.o 
+else
+libs= lib/$(mcu).o lib/command.o lib/dco_calib.o lib/apps.o lib/msp430.o lib/arduino.o
+endif
+
 hdrs=
 ERR=
 
@@ -153,6 +188,10 @@ ifeq ($(filter jtag430x2, $(config)), jtag430x2)
        # add in the jtag430asm code if needed
        ifneq ($(filter jtag430asm.o, $(libs)), jtag430asm.o)
                libs+= apps/jtag/jtag430asm.o
+       endif
+       #add in the jtag430 app if not already
+       ifneq ($(filter apps/jtag/jtag430.o, $(apps)), apps/jtag/jtag430.0)
+               apps+= apps/jtag/jtag430.o
                hdrs+= jtag430.h
        endif
        apps+= apps/jtag/jtag430x2.o
@@ -209,6 +248,17 @@ ifeq ($(filter jtagxscale, $(config)), jtagxscale)
        hdrs+= jtagxscale.h
 endif
 
+# include openocd app
+ifeq ($(filter openocd, $(config)), openocd)
+       # add in base jtag code if not already
+       ifneq ($(filter apps/jtag/jtag.o, $(apps)), apps/jtag/jtag.o)
+               apps+= apps/jtag/jtag.o
+               hdrs+= jtag.h
+       endif
+       apps+= apps/jtag/openocd.o
+       hdrs+= openocd.h
+endif
+
 # include chipcon app
 ifeq ($(filter chipcon, $(config)), chipcon)
        apps+= apps/chipcon/chipcon.o
@@ -291,23 +341,37 @@ goodfet.hex: goodfet
 run:
        ../client/goodfet.msp430 test
 
+avrinstall: $(app).hex
+       #to be merged
+       avrdude -V -F -c stk500v1 -p m328p -b 57600 -P $(GOODFET) -U flash:w:$(app).hex
+
+ifeq ($(platform),tilaunchpad)
+install: $(app).hex
+       $(JTAG) -e -p $(app).hex
+verify:
+       $(JTAG) -v $(app).hex
+erase:
+       $(JTAG) -e $(app).hex
+else
 install: $(app).hex
-       $(BSL) -e -p $(app).hex 
-       #ls info.txt && $(BSL) -P $(app).hex -p info.txt || true  #MSP430F2xx targets only, inelegant.
+       $(MSP430BSL) -e -p $(app).hex 
+installinfo:
+       $(MSP430BSL) -P $(app).hex -p info.txt || true  #MSP430F2xx targets only, inelegant.
 verify:
-       $(BSL) -P $(app).hex -v $(app).hex
+       $(MSP430BSL) -P $(app).hex -v $(app).hex
+endif
 dumpinfo:
-       $(BSL) --dumpinfo
+       $(MSP430BSL) --dumpinfo
+erase:
+       $(MSP430BSL) -e 
 $(app).c: config builddate appsfiles err
-$(app): $(app).c $(libs) $(apps)
+$(app): $(libs) $(apps)
 $(app).hex: $(app)
        msp430-objcopy goodfet -O ihex goodfet.hex
 m4s: $(app).hex
        msp430-objdump -D -m msp430 $(app).hex | m4s init
-erase:
-       $(BSL) -e 
 clean:
-       rm -f $(app) $(app).hex $(libs) $(apps) include/config.h include/builddate.h include/apps.h
+       rm -f $(app) $(app).hex $(libs) $(apps) lib/apps.c include/config.h include/builddate.h include/apps.h
 docs:
        doxygen
 pushdocs: docs