-include config.mk
-#platform?=goodfet
-#platform?=telosb
-#platform?=z1
-#platform?=nhbadge
-#platform?=nhbadgeb
-#platofrm?=arduino
-#platform?=tilaunchpad
-platform?=goodfet
-
-# donb
-ifeq ($(platform),donbfet)
-GCC?=avr-gcc
-mcu?=atmega644p
-CFLAGS=$(DEBUG) -mmcu=$(mcu) -W -Os -mcall-prologues -Wall -Wextra -Wuninitialized -fpack-struct -fshort-enums -funsigned-bitfields
-endif
-ifeq ($(platform),tilaunchpad)
-mcu?=msp430x1612
-CFLAGS+=-DDEBUG_LEVEL=3 -DDEBUG_START=1 -DINBAND_DEBUG
-#CFLAGS+= -Werror
-endif
+platform?=goodfet
+mcu?=RUNCONFIG
#include `uname`.mak
GOODFET?=/dev/tty.usbser*
-#For Arduino,
-#BSL?=avrdude -V -F -c stk500v1 -p m328p -b 57600 -P /dev/tty.usbserial-* -U flash:w:blink.hex
#For tos-bsl, use --invert-reset --invert-test
MSP430BSL?=goodfet.bsl --speed=38400
JTAG=msp430-jtag
-#One of these should be defined explicitly.
-#Default removed because of confusion.
-#mcu?=msp430x2618
-#mcu?=msp430x1612
-#mcu?=atmega168
-mcu?=RUNCONFIG
-
-
-#N.B., gcc WILL NOT BITCH if this file doesn't exist.
GCCINC?=
-#GCC?=avr-gcc
-GCC?=msp430-gcc -T ldscripts/$(mcu).x
+#All of these are ?= in order ot allow overriding.
+GCC?=msp430-gcc -mmcu=$(mcu)
+LDFLAGS?=-mmcu=$(mcu) #-Wl,-dT ldscripts/$(mcu).x
-CCEXTRA?= $(CFLAGS) -D$(mcu) -D$(platform) -Dplatform=$(platform) -DGCC $(GCCINC) -I include -I platforms
-CC=$(GCC) -Wall -Os -fno-strict-aliasing -g -mmcu=$(mcu) $(CCEXTRA)
+CCEXTRA ?= $(CFLAGS) -D$(mcu) -D$(platform) -Dplatform=$(platform) -Dboard=$(board) $(GCCINC) -I include -I platforms
+CC =$(GCC) -Wall -O1 -fno-strict-aliasing -g $(CCEXTRA)
# Available Applications
# ======================
# Below is a list of available applications and their descriptions.
-# PRODUCTION:
+# PRODUCTION:
# None have made it to production grade quality
# BETA:
# Configurations
# ==============
-# This is what you need to customize to specify which apps you want in your
-# firmware. The "config" variable is just a space-delimited list of apps you
-# want included. The makefile will take the list of apps and include all of
-# the proper code needed to build your desired firmware.
-
-# bare minimum
-# config = monitor
-
-# basic JTAG adapter
-# config = monitor jtag
-
-# Chipcon hacking
-# config = monitor chipcon ccspi
-
-# Glitch research
-# config = monitor glitch
+# This is what you need to customize to specify which apps you want in
+# your firmware. The "config" variable is just a space-delimited list
+# of apps you want included. The makefile will take the list of apps
+# and include all of the proper code needed to build your desired
+# firmware. $(config) is generated by config.mk.
-# XScale PXA255 JTAG
-# config = monitor jtagxscale
-# OpenOCD bit-bang device
-#config = monitor openocd
-
-# Old Default Config
-# config = monitor sbw chipcon nrf ccspi spi jtagarm7 jtag430 jtag430x2 avr
-
-# New default.
-ifeq ($(platform),tilaunchpad)
-config ?= monitor chipcon i2c
-else
-config ?= monitor chipcon spi jtag430 jtag430x2 avr openocd ccspi
-endif
-
-# donb
-ifeq ($(platform),donbfet)
-config=monitor avr spi jscan
-endif
# Build the needed list of app and lib object files from the config
-apps=
+apps=
ifeq ($(platform),tilaunchpad)
libs= lib/$(platform).o lib/command.o lib/apps.o lib/msp430_serial.o
-#libs+=lib/setjmp.o
+#libs+=lib/setjmp.o
else
-libs= lib/$(mcu).o lib/command.o lib/dco_calib.o lib/apps.o lib/msp430.o lib/arduino.o
+libs= lib/$(mcu).o lib/command.o lib/dco_calib.o lib/apps.o lib/msp430.o lib/arduino.o $(extralibs)
endif
hdrs=
endif
endif
+# include MAX342x USB drivers.
+ifeq ($(filter maxusb, $(config)), maxusb)
+ ifneq ($(filter apps/usb/maxusb.o, $(apps)), apps/usb/maxusb.o)
+ apps+= apps/usb/maxusb.o
+ hdrs+= maxusb.h
+ endif
+endif
+
# include the sbw defs if they specified it
ifeq ($(filter sbw, $(config)), sbw)
# if they only specify sbw, include jtag
# include adc app
ifeq ($(filter adc, $(config)), adc)
- ifeq ($(mcu), msp430x2274)
+ ifeq ($(mcu), msp430f2274)
apps+= apps/adc/adc.o
hdrs+= adc.h
else
$(JTAG) -e $(app).hex
else
install: $(app).hex
- $(MSP430BSL) -e -p $(app).hex
+ $(MSP430BSL) -e -p $(app).hex
installinfo:
$(MSP430BSL) -P $(app).hex -p info.txt || true #MSP430F2xx targets only, inelegant.
verify:
$(MSP430BSL) -P $(app).hex -v $(app).hex
+erase:
+ $(MSP430BSL) -e
+
endif
dumpinfo:
$(MSP430BSL) --dumpinfo
-erase:
- $(MSP430BSL) -e
$(app).c: config builddate appsfiles err
-$(app): $(libs) $(apps)
-
+$(app): $(app).o $(libs) $(apps)
+armlink: $(app).o $(libs) $(apps) $(platformlibs)
+ arm-none-eabi-ld -v -Tlinkers/stm32f407.cmd -nostartfiles -o goodfet.elf $(app).o $(libs) $(apps)
+ arm-none-eabi-objcopy -Obinary goodfet.elf goodfet.bin
ifeq ($(platform),donbfet)
$(app).hex: $(app)
avr-objcopy -j .text -j .data -O ihex goodfet goodfet.hex
m4s: $(app).hex
msp430-objdump -D -m msp430 $(app).hex | m4s init
clean:
- rm -f $(app) $(app).hex $(libs) $(apps) lib/apps.c include/config.h include/builddate.h include/apps.h
+ rm -f *.o $(app) $(app).hex $(libs) $(apps) lib/apps.c include/config.h include/builddate.h include/apps.h
docs:
doxygen
pushdocs: docs
projects / goodfet / blobdiff