Moved board definition from apimote to apimote1 for versioning support.

[goodfet] / firmware / Makefile

diff --git a/firmware/Makefile b/firmware/Makefile
index 2a0ad6f..51633a9 100644 (file)
--- a/firmware/Makefile
+++ b/firmware/Makefile
@@ -14,15 +14,12 @@ JTAG=msp430-jtag
 
 GCCINC?=
 
-#GCC?=avr-gcc
-# We use -Wl,-dT because gcc adds the msp430mcu definitions at the
-# very end of the command line, so they only have an effect for a
-# default linker script
-GCC?=msp430-gcc
+#All of these are ?= in order ot allow overriding.
+GCC?=msp430-gcc -mmcu=$(mcu)
 LDFLAGS?=-mmcu=$(mcu) #-Wl,-dT ldscripts/$(mcu).x
 
-CCEXTRA?=  $(CFLAGS) -D$(mcu) -D$(platform) -Dplatform=$(platform) -Dboard=$(board) $(GCCINC) -I include -I platforms
-CC=$(GCC) -Wall -O1 -fno-strict-aliasing -g -mmcu=$(mcu)  $(CCEXTRA)
+CCEXTRA ?=  $(CFLAGS) -D$(mcu) -D$(platform) -Dplatform=$(platform) -Dboard=$(board) $(GCCINC) -I include -I platforms
+CC =$(GCC) -Wall -O1 -fno-strict-aliasing -g   $(CCEXTRA)
 
 # Available Applications
 # ======================
@@ -67,38 +64,12 @@ CC=$(GCC) -Wall -O1 -fno-strict-aliasing -g -mmcu=$(mcu)  $(CCEXTRA)
 
 # Configurations
 # ==============
-# This is what you need to customize to specify which apps you want in your
-# firmware.  The "config" variable is just a space-delimited list of apps you
-# want included.  The makefile will take the list of apps and include all of
-# the proper code needed to build your desired firmware.
+# This is what you need to customize to specify which apps you want in
+# your firmware.  The "config" variable is just a space-delimited list
+# of apps you want included.  The makefile will take the list of apps
+# and include all of the proper code needed to build your desired
+# firmware.  $(config) is generated by config.mk.
 
-# bare minimum
-# config = monitor
-
-# basic JTAG adapter
-# config = monitor jtag
-
-# Chipcon hacking
-# config = monitor chipcon ccspi
-
-# Glitch research
-# config = monitor glitch
-
-# XScale PXA255 JTAG
-# config = monitor jtagxscale
-
-# OpenOCD bit-bang device
-#config = monitor openocd
-
-# Old Default Config
-# config = monitor sbw  chipcon nrf ccspi spi jtagarm7 jtag430 jtag430x2 avr
-
-# New default.
-ifeq ($(platform),tilaunchpad)
-config ?= monitor chipcon i2c
-else
-config ?= monitor chipcon spi jtag430 jtag430x2 avr openocd ccspi maxusb
-endif
 
 
 # Build the needed list of app and lib object files from the config
@@ -108,7 +79,7 @@ ifeq ($(platform),tilaunchpad)
 libs= lib/$(platform).o lib/command.o lib/apps.o lib/msp430_serial.o
 #libs+=lib/setjmp.o
 else
-libs= lib/$(mcu).o lib/command.o lib/dco_calib.o lib/apps.o lib/msp430.o lib/arduino.o
+libs= lib/$(mcu).o lib/command.o lib/dco_calib.o lib/apps.o lib/msp430.o lib/arduino.o $(extralibs)
 endif
 
 hdrs=
@@ -368,8 +339,10 @@ endif
 dumpinfo:
        $(MSP430BSL) --dumpinfo
 $(app).c: config builddate appsfiles err
-$(app): $(libs) $(apps)
-
+$(app): $(app).o $(libs) $(apps) 
+armlink: $(app).o $(libs) $(apps) $(platformlibs)
+       arm-none-eabi-ld -v -Tlinkers/stm32f407.cmd -nostartfiles -o goodfet.elf $(app).o $(libs) $(apps)
+       arm-none-eabi-objcopy -Obinary goodfet.elf goodfet.bin
 ifeq ($(platform),donbfet)
 $(app).hex: $(app)
        avr-objcopy -j .text -j .data -O ihex goodfet goodfet.hex
@@ -380,7 +353,7 @@ endif
 m4s: $(app).hex
        msp430-objdump -D -m msp430 $(app).hex | m4s init
 clean:
-       rm -f $(app) $(app).hex $(libs) $(apps) lib/apps.c include/config.h include/builddate.h include/apps.h
+       rm -f *.o $(app) $(app).hex $(libs) $(apps) lib/apps.c include/config.h include/builddate.h include/apps.h
 docs:
        doxygen
 pushdocs: docs