Beginnings of info flash support. It isn't very good.

[goodfet] / firmware / apps / avr / avr.c

diff --git a/firmware/apps/avr/avr.c b/firmware/apps/avr/avr.c
index a8d9d34..9531563 100644 (file)
--- a/firmware/apps/avr/avr.c
+++ b/firmware/apps/avr/avr.c
@@ -11,6 +11,7 @@
 #include <iomacros.h>
 
 #include "avr.h"
+//#include "glitch.h"
 
 //! Setup the AVR pins.
 void avrsetup(){
@@ -20,25 +21,29 @@ void avrsetup(){
 //! Initialized an attached AVR.
 void avrconnect(){
   //set I/O pins
-  avrsetup();
+  avrsetup(); //Cut this?
+  
+  SETSS;
+  //delay(50);
   
   //Pulse !RST (SS) at least twice while CLK is low.
   CLRCLK;
   CLRSS;
+  //delay(5);
 
   SETSS;
   CLRCLK;
-  delay(500);
+  //delay(5);
   CLRSS;
-  delay(500);
+  //delay(5);
   
   //Enable programming
   avr_prgen();
 }
 
 //! Read and write an SPI byte with delays.
-unsigned char avrtrans8(unsigned char byte){
-  register unsigned int bit;
+u8 avrtrans8(u8 byte){
+  register u16 bit;
   //This function came from the SPI Wikipedia article.
   //Minor alterations.
   
@@ -67,7 +72,7 @@ u8 avrexchange(u8 a, u8 b, u8 c, u8 d){
   avrtrans8(a);
   avrtrans8(b);
   if(avrtrans8(c)!=b){
-    debugstr("AVR sync error, b not returned as c.");
+    //debugstr("AVR sync error, b not returned as c.");
     //Reconnect here?
   }
   return avrtrans8(d);
@@ -101,6 +106,11 @@ void avr_erase(){
 u8 avr_lockbits(){
   return avrexchange(0x58, 0, 0, 0);
 }
+//! Write lock bits.
+void avr_setlock(u8 bits){
+  avrexchange(0xAC,0xE0,0x00,
+             bits);
+}
 
 //! Read a byte of EEPROM.
 u8 avr_peekeeprom(u16 adr){
@@ -127,10 +137,11 @@ void avrhandle(unsigned char app,
               unsigned long len){
   unsigned long i;
   unsigned int at;
-  static u8 connected=0;
   
+  /*
   if(!avr_isready() && connected)
     debugstr("AVR is not yet ready.");
+  */
   
   switch(verb){
   case READ:
@@ -143,9 +154,10 @@ void avrhandle(unsigned char app,
     avrsetup();
     txdata(app,verb,0);
     break;
-  case START://returns device code
+  case START:
     avrconnect();
-    //no break here
+    txdata(app,verb,0);
+    break;//Used to fall through here.
   case AVR_PEEKSIG:
     for(i=0;i<4;i++)
       cmddata[i]=avr_sig(i);
@@ -159,7 +171,10 @@ void avrhandle(unsigned char app,
     cmddata[0]=avr_lockbits();
     txdata(app,verb,1);
     break;
-
+  case AVR_POKELOCK:
+    avr_setlock(cmddata[0]);
+    txdata(app,verb,0);
+    break;
   case AVR_POKEEEPROM:
     avr_pokeeeprom(cmddataword[0], cmddata[2]);
     //no break here.