READ command only returns a byte if it is supposed to by the command structure.

[goodfet] / firmware / apps / chipcon / chipcon.c

diff --git a/firmware/apps/chipcon/chipcon.c b/firmware/apps/chipcon/chipcon.c
index c585594..92542fc 100644 (file)
--- a/firmware/apps/chipcon/chipcon.c
+++ b/firmware/apps/chipcon/chipcon.c
@@ -132,16 +132,27 @@ void cchandle(unsigned char app,
   
   switch(verb){
     //CC_PEEK and CC_POKE will come later.
+  case PEEK:
+    cmddata[0]=cc_peekirambyte(cmddata[0]);
+    txdata(app,verb,1);
+    break;
+  case POKE:
+    cmddata[0]=cc_pokeirambyte(cmddata[0],cmddata[1]);
+    txdata(app,verb,0);
+    break;
   case READ:  //Write a command and return 1-byte reply.
     cccmd(len);
-    ccread(1);
+    if(cmddata[0]&0x4)
+      ccread(1);
     txdata(app,verb,1);
+    
     break;
   case WRITE: //Write a command with no reply.
     cccmd(len);
     txdata(app,verb,0);
     break;
   case START://enter debugger
+    ccsetup();
     ccdebuginit();
     txdata(app,verb,0);
     break;
@@ -174,6 +185,9 @@ void cchandle(unsigned char app,
     cc_get_pc();
     txdata(app,verb,2);
     break;
+  case CC_LOCKCHIP:
+    cc_lockchip();
+    //no break, return status
   case CC_READ_STATUS:
     cc_read_status();
     txdata(app,verb,1);
@@ -264,6 +278,28 @@ void cc_wr_config(unsigned char config){
   cccmd(2);
   ccread(1);
 }
+
+//! Locks the chip.
+void cc_lockchip(){
+  register int i;
+  
+  debugstr("Locking chip.");
+  cc_wr_config(1);//Select Info Flash 
+  if(!(cc_rd_config()&1))
+    debugstr("Config forgotten!");
+  
+  //Clear config page.
+  for(i=0;i<2048;i++)
+    cc_pokedatabyte(0xf000+i,0);
+  cc_write_flash_page(0);
+  if(cc_peekcodebyte(0))
+    debugstr("Failed to clear info flash byte.");
+  
+  cc_wr_config(0);  
+  if(cc_rd_config()&1)
+    debugstr("Stuck in info flash mode!");
+}
+
 //! Read the configuration byte.
 unsigned char cc_rd_config(){
   cmddata[0]=CCCMD_RD_CONFIG; //0x24
@@ -349,6 +385,7 @@ const u8 flash_routine[] = {
   0xA5                                                       //                 DB 0xA5; 
 }; 
 
+
 //! Copies flash buffer to flash.
 void cc_write_flash_page(u32 adr){
   //Assumes that page has already been written to XDATA 0xF000
@@ -375,18 +412,20 @@ void cc_write_flash_page(u32 adr){
   cmddata[1]=0xc7;
   cmddata[2]=0x51;
   cc_debug_instr(3);
-  //debugstr("Loaded bank info.");
+  debugstr("Loaded bank info.");
   
   cc_set_pc(0xf000+FLASHPAGE_SIZE);//execute code fragment
   cc_resume();
-  //debugstr("Executing.");
+  
+  debugstr("Executing.");
   
   
   while(!(cc_read_status()&CC_STATUS_CPUHALTED)){
     P1OUT^=1;//blink LED while flashing
   }
   
-  //debugstr("Done flashing.");
+  
+  debugstr("Done flashing.");
   
   P1OUT&=~1;//clear LED
 }
@@ -454,11 +493,11 @@ unsigned char cc_debug(unsigned char len,
   unsigned char cmd=CCCMD_DEBUG_INSTR+(len&0x3);//0x54+len
   CCWRITE;
   cctrans8(cmd);
-  if(len--)
+  if(len>0)
     cctrans8(a);
-  if(len--)
+  if(len>1)
     cctrans8(b);
-  if(len--)
+  if(len>2)
     cctrans8(c);
   CCREAD;
   return cctrans8(0x00);
@@ -519,21 +558,31 @@ for (n = 0; n < count; n++) {
 unsigned char cc_peekdatabyte(unsigned int adr){
   unsigned char
     hb=(adr&0xFF00)>>8,
-    lb=adr&0xFF,
-    toret;
-
+    lb=adr&0xFF;
+  
   //MOV DPTR, adr
   cc_debug(3, 0x90, hb, lb);
   //MOVX A, @DPTR
   //Must be 2, perhaps for clocking?
-  toret=cc_debug(3, 0xE0, 0, 0);
-  return toret;
-  
-    /*
-DEBUG_INSTR(IN: 0x90, HIBYTE(address), LOBYTE(address), OUT: Discard);
-for (n = 0; n < count; n++) {
-    DEBUG_INSTR(IN: 0xE0, OUT: outputArray[n]);
-    DEBUG_INSTR(IN: 0xA3, OUT: Discard);
+  return cc_debug(3, 0xE0, 0, 0);
 }
-  */
+
+
+//! Fetch a byte of IRAM.
+u8 cc_peekirambyte(u8 adr){
+  //CLR A
+  cc_debug(2, 0xE4, 0, 0);
+  //MOV A, #iram
+  return cc_debug(3, 0xE5, adr, 0);
+}
+
+//! Write a byte of IRAM.
+u8 cc_pokeirambyte(u8 adr, u8 val){
+  //CLR A
+  cc_debug(2, 0xE4, 0, 0);
+  //MOV #iram, #val
+  return cc_debug(3, 0x75, adr, val);
+  //return cc_debug(3, 0x75, val, adr);
 }
+
+