#include "command.h"
#include "jtag.h"
+#define JTAG_APP
+
+//! Handles a monitor command.
+void jtag_handle_fn(uint8_t const app,
+ uint8_t const verb,
+ uint32_t const len);
+
+// define the jtag app's app_t
+app_t const jtag_app = {
+
+ /* app number */
+ JTAG,
+
+ /* handle fn */
+ jtag_handle_fn,
+
+ /* name */
+ "JTAG",
+
+ /* desc */
+ "\tThe JTAG app handles basic JTAG operations such as\n"
+ "\tresetting the TAP, resetting the target, detecting\n"
+ "\tthe instruction register width, shifting bits into\n"
+ "\tboth the instruction and data registers.\n"
+};
+
//! Set up the pins for JTAG mode.
void jtagsetup(){
int savedtclk=0;
-// NOTE: important: THIS MODULE REVOLVES AROUND RETURNING TO RUNTEST/IDLE, OR THE FUNCTIONAL EQUIVALENT
-//! Shift N bits over TDI/TDO. May choose LSB or MSB, and select whether to terminate (TMS-high on last bit) and whether to return to RUNTEST/IDLE
+// NOTE: important: THIS MODULE REVOLVES AROUND RETURNING TO RUNTEST/IDLE, OR
+// THE FUNCTIONAL EQUIVALENT
+//! Shift N bits over TDI/TDO. May choose LSB or MSB, and select whether to
+// terminate (TMS-high on last bit) and whether to return to RUNTEST/IDLE
// flags should be 0 for most uses.
// for the extreme case, flags should be (NOEND|NORETDLE|LSB)
// other edge cases can involve a combination of those three flags
//
// the max bit-size that can be be shifted is 32-bits.
-// for longer shifts, use the NOEND flag (which infers NORETIDLE so the additional flag is unnecessary)
+// for longer shifts, use the NOEND flag (which infers NORETIDLE so the
+// additional flag is unnecessary)
//
-// NORETIDLE is used for special cases where (as with arm) the debug subsystem does not want to
-// return to the RUN-TEST/IDLE state between setting IR and DR
-unsigned long jtagtransn(unsigned long word, unsigned char bitcount, unsigned char flags){
+// NORETIDLE is used for special cases where (as with arm) the debug
+// subsystem does not want to return to the RUN-TEST/IDLE state between
+// setting IR and DR
+unsigned long jtagtransn(unsigned long word,
+ unsigned char bitcount,
+ unsigned char flags) {
unsigned char bit;
unsigned long high = 1L;
unsigned long mask;
}
//! Handles a monitor command.
-void jtaghandle(unsigned char app,
- unsigned char verb,
- unsigned long len){
- switch(verb){
- //START handled by specific JTAG
- case STOP:
- jtag_stop();
- txdata(app,verb,0);
- break;
- case SETUP:
- jtagsetup();
- txdata(app,verb,0);
- break;
- case JTAG_IR_SHIFT:
- cmddata[0]=jtag_ir_shift8(cmddata[0]);
- txdata(app,verb,1);
- break;
- case JTAG_DR_SHIFT:
- cmddataword[0]=jtag_dr_shift16(cmddataword[0]);
- txdata(app,verb,2);
- break;
- case JTAG_RESETTAP:
- jtag_resettap();
- txdata(app,verb,0);
- break;
- default:
- txdata(app,NOK,0);
- }
+void jtag_handle_fn(uint8_t const app,
+ uint8_t const verb,
+ uint32_t const len)
+{
+ switch(verb)
+ {
+ //START handled by specific JTAG
+ case STOP:
+ jtag_stop();
+ txdata(app,verb,0);
+ break;
+
+ case SETUP:
+ jtagsetup();
+ txdata(app,verb,0);
+ break;
+
+ case JTAG_IR_SHIFT:
+ cmddata[0]=jtag_ir_shift8(cmddata[0]);
+ txdata(app,verb,1);
+ break;
+
+ case JTAG_DR_SHIFT:
+ cmddataword[0]=jtag_dr_shift16(cmddataword[0]);
+ txdata(app,verb,2);
+ break;
+
+ case JTAG_RESETTAP:
+ jtag_resettap();
+ txdata(app,verb,0);
+ break;
+
+ default:
+ txdata(app,NOK,0);
+ }
}