Setting the default config in the Makefile so that it builds the exact same

[goodfet] / firmware / apps / jtag / jtag430x2.c

diff --git a/firmware/apps/jtag/jtag430x2.c b/firmware/apps/jtag/jtag430x2.c
index d2bb194..4df9629 100644 (file)
--- a/firmware/apps/jtag/jtag430x2.c
+++ b/firmware/apps/jtag/jtag430x2.c
@@ -5,7 +5,31 @@
 
 #include "platform.h"
 #include "command.h"
-#include "jtag.h"
+#include "jtag430.h"
+#include "jtag430x2.h"
+
+void jtag430x2_handle_fn( uint8_t const app,
+                                                 uint8_t const verb,
+                                                 uint32_t const len);
+
+
+// define the jtag430x2 app's app_t
+app_t const jtag430x2_app = {
+
+       /* app number */
+       JTAG430X2,
+
+       /* handle fn */
+       jtag430x2_handle_fn,
+
+       /* name */
+       "JTAG430X2",
+
+       /* desc */
+       "\tThe JTAG430X2 app extends the basic JTAG app with support\n"
+       "\tfor 20-bit MSP430 devices.\n"
+};
+
 
 unsigned char jtagid;
 
@@ -83,7 +107,7 @@ void jtag430x2_writemem(unsigned long adr,
     SETTCLK;
     //init state
   }else{
-    while(1) P1OUT^=1; //loop if locked up
+    while(1) PLEDOUT^=PLEDPIN; //loop if locked up
   }
 }
 
@@ -93,19 +117,20 @@ unsigned int jtag430x2_readmem(unsigned long adr){
   //unsigned int tries=5;
   
   while(1){
-    do{
-      jtag_ir_shift8(IR_CNTRL_SIG_CAPTURE);
-    }while(!(jtag_dr_shift16(0) & 0x0301));
+    //do{
+    jtag_ir_shift8(IR_CNTRL_SIG_CAPTURE);
+    //}while(!(jtag_dr_shift16(0) & 0x0301));
     
     if(jtag_dr_shift16(0) & 0x0301){
       // Read Memory
       CLRTCLK;
       jtag_ir_shift8(IR_CNTRL_SIG_16BIT);
-      if(adr>=0x100){
-       jtag_dr_shift16(0x0501);//word read
-      }else{
-       jtag_dr_shift16(0x0511);//byte read
-      }
+      
+      //if(adr>=0x100){
+      jtag_dr_shift16(0x0501);//word read
+      //}else{
+      //jtag_dr_shift16(0x0511);//byte read
+      //}
       
       jtag_ir_shift8(IR_ADDR_16BIT);
       jtag_dr_shift20(adr); //20
@@ -184,18 +209,19 @@ unsigned int jtag430x2_fusecheck(){
 
 
 //! Handles MSP430X2 JTAG commands.  Forwards others to JTAG.
-void jtag430x2handle(unsigned char app,
-                    unsigned char verb,
-                    unsigned long len){
+void jtag430x2_handle_fn( uint8_t const app,
+                                                 uint8_t const verb,
+                                                 uint32_t const len)
+{
   register char blocks;
   
   unsigned int i,val;
-  unsigned long at;
+  unsigned long at, l;
   
   //jtag430_resettap();
   
   if(verb!=START && jtag430mode==MSP430MODE){
-    jtag430handle(app,verb,len);
+    (*(jtag430_app.handle))(app,verb,len);
     return;
   }
   
@@ -209,7 +235,15 @@ void jtag430x2handle(unsigned char app,
     //MSP430 or MSP430X
     if(jtagid==MSP430JTAGID){ 
       jtag430mode=MSP430MODE;
-      drwidth=16;
+      
+      /* So the way this works is that a width of 20 does some
+        backward-compatibility finagling, causing the correct value
+        to be exchanged for addresses on 16-bit chips as well as the
+        new MSP430X chips.  (This has only been verified on the
+        MSP430F2xx family.  TODO verify for others.)
+       */
+
+      drwidth=20;
       
       //Perform a reset and disable watchdog.
       jtag430_por();
@@ -242,11 +276,11 @@ void jtag430x2handle(unsigned char app,
     blocks=(len>4?cmddata[4]:1);
     at=cmddatalong[0];
     
-    len=0x80;
-    txhead(app,verb,len);
+    l=0x80;
+    txhead(app,verb,l);
     
     while(blocks--){
-      for(i=0;i<len;i+=2){
+      for(i=0;i<l;i+=2){
        jtag430_resettap();
        delay(10);
        
@@ -267,7 +301,7 @@ void jtag430x2handle(unsigned char app,
     cmddatalong[0]=jtag430_deviceid();
     txdata(app,verb,4);
     break;
-
+  case JTAG430_WRITEFLASH:
   case JTAG430_WRITEMEM:
   case POKE:
     jtag430x2_writemem(cmddatalong[0],
@@ -280,13 +314,16 @@ void jtag430x2handle(unsigned char app,
   case JTAG430_HALTCPU:  
   case JTAG430_RELEASECPU:
   case JTAG430_SETINSTRFETCH:
-  case JTAG430_WRITEFLASH:
+
   case JTAG430_ERASEFLASH:
   case JTAG430_SETPC:
+    debugstr("This function is not yet implemented for MSP430X2.");
+    debughex(verb);
     txdata(app,NOK,0);
     break;
   default:
-    jtaghandle(app,verb,len);
+    (*(jtag_app.handle))(app,verb,len);
   }
   jtag430_resettap();
 }
+