Added LED test into monitor, supporting increased LEDs on the apimote and telosb...

[goodfet] / firmware / config.mk

diff --git a/firmware/config.mk b/firmware/config.mk
index 554e79a..2657336 100644 (file)
--- a/firmware/config.mk
+++ b/firmware/config.mk
@@ -5,6 +5,14 @@
 #Unset by default, but can be explicitly set later.
 config=undef
 
+ifneq (,$(findstring $(board),apimote1))
+mcu ?= msp430f2618
+platform := apimote1
+config := monitor spi ccspi
+MSP430BSL?=goodfet.bsl --speed=38400 --swap-reset-test
+CFLAGS += -Duseuart1 -Dapimote
+endif
+
 ifneq (,$(findstring $(board),goodfet20 goodfet10 goodfet11))
 mcu ?= msp430f1612
 platform := goodfet
@@ -30,6 +38,19 @@ CONFIG_nrf = y
 endif
 
 ifneq (,$(findstring $(board),stm32f4discovery))
+
+periph ?= /opt/STM32F4xx_StdPeriph_Driver
+discovery ?= /opt/STM32F4-Discovery_FW_V1.1.0
+
+usbcore ?= $(discovery)/Libraries/STM32_USB_Device_Library/Core
+usbsrc ?= $(usbcore)/src
+otginc ?= /opt/STM32F4-Discovery_FW_V1.1.0/Libraries/STM32_USB_OTG_Driver/inc
+otgsrc ?= /opt/STM32F4-Discovery_FW_V1.1.0/Libraries/STM32_USB_OTG_Driver/src
+
+pincs ?=  -I$(periph)/inc -I$(usbcore)/inc -I$(otginc) -I$(discovery)/Libraries/CMSIS/ST/STM32F4xx/Include  -I$(discovery)/Libraries/CMSIS/Include -Dassert_param\(x\)= -DUSE_USB_OTG_FS -I/opt/STM32F4-Discovery_FW_V1.1.0/Utilities/STM32F4-Discovery
+psrc ?=  /opt/STM32F4xx_StdPeriph_Driver/src
+
+
 GCC     = arm-none-eabi-gcc
 CC      = arm-none-eabi-gcc
 LD      = arm-none-eabi-ld -v
@@ -37,19 +58,25 @@ AR      = arm-none-eabi-ar
 AS      = arm-none-eabi-as
 CP      = arm-none-eabi-objcopy
 OD     = arm-none-eabi-objdump
-CFLAGS  =  -I./ -Iinclude/ -c -fno-common -O1 -g -mcpu=cortex-m3 -mthumb 
+CFLAGS  = -c -fno-common -O1 -g -mcpu=cortex-m3 -mthumb $(pincs)
 AFLAGS  = -ahls -mapcs-32
 LFLAGS  = -Ttmplink.cmd -nostartfiles
 CPFLAGS = -Obinary
 ODFLAGS        = -S
 LDFLAGS = 
 
+
 mcu ?= stm32f407
 platform := stm32f4discovery
 config = monitor
+
+# This is a pain.
+#usblibs =  $(usbsrc)/usbd_core.o $(usbsrc)/usbd_req.o $(usbsrc)/usbd_ioreq.o $(usbsrc)/usbd_core.o $(otgsrc)/usb_dcd.o $(otgsrc)/usb_dcd_int.o $(otgsrc)/usb_hcd.o $(otgsrc)/usb_hcd_int.o $(otgsrc)/usb_otg.o
+extralibs = lib/cortexm3.o lib/system_stm32f4xx.o lib/stm32f4xx_rcc.o $(psrc)/stm32f4xx_gpio.o $(psrc)/stm32f4xx_usart.o $(usblibs) 
+
 endif
 
-ifneq (,$(findstring $(board),facedancer10))
+ifneq (,$(findstring $(board),facedancer10 facedancer11))
 mcu ?= msp430f2618
 platform := goodfet
 config = monitor spi maxusb