Minor cleanup.

[goodfet] / firmware / config.mk

diff --git a/firmware/config.mk b/firmware/config.mk
index 86b6d5e..71cac4b 100644 (file)
--- a/firmware/config.mk
+++ b/firmware/config.mk
@@ -2,8 +2,22 @@
 ## These are production boards.
 ##################################
 
-#Unset by default, but can be explicitly set later.
-config=undef
+#Unset by default, but can be explicitly overwritten.
+config ?= undef
+
+ifneq (,$(findstring $(board),apimote1 apimote))
+mcu ?= msp430f2618
+platform := apimote
+config := monitor spi ccspi
+MSP430BSL?=goodfet.bsl --speed=38400 --swap-reset-test
+CFLAGS += -Duseuart1 -Dapimote
+endif
+
+ifneq (,$(findstring $(board),goodthopter01 goodthopter10))
+mcu ?= msp430f2274
+platform := goodfet
+config := monitor spi
+endif
 
 ifneq (,$(findstring $(board),goodfet20 goodfet10 goodfet11))
 mcu ?= msp430f1612
@@ -33,7 +47,13 @@ ifneq (,$(findstring $(board),stm32f4discovery))
 
 periph ?= /opt/STM32F4xx_StdPeriph_Driver
 discovery ?= /opt/STM32F4-Discovery_FW_V1.1.0
-pincs ?=  -I$(periph)/inc -I$(discovery)/Libraries/CMSIS/ST/STM32F4xx/Include -I$(discovery)/Libraries/CMSIS/Include -Dassert_param\(x\)
+
+usbcore ?= $(discovery)/Libraries/STM32_USB_Device_Library/Core
+usbsrc ?= $(usbcore)/src
+otginc ?= /opt/STM32F4-Discovery_FW_V1.1.0/Libraries/STM32_USB_OTG_Driver/inc
+otgsrc ?= /opt/STM32F4-Discovery_FW_V1.1.0/Libraries/STM32_USB_OTG_Driver/src
+
+pincs ?=  -I$(periph)/inc -I$(usbcore)/inc -I$(otginc) -I$(discovery)/Libraries/CMSIS/ST/STM32F4xx/Include  -I$(discovery)/Libraries/CMSIS/Include -Dassert_param\(x\)= -DUSE_USB_OTG_FS -I/opt/STM32F4-Discovery_FW_V1.1.0/Utilities/STM32F4-Discovery
 psrc ?=  /opt/STM32F4xx_StdPeriph_Driver/src
 
 
@@ -55,11 +75,14 @@ LDFLAGS =
 mcu ?= stm32f407
 platform := stm32f4discovery
 config = monitor
-extralibs = lib/cortexm3.o lib/system_stm32f4xx.o $(psrc)/stm32f4xx_rcc.o $(psrc)/stm32f4xx_gpio.o
+
+# This is a pain.
+#usblibs =  $(usbsrc)/usbd_core.o $(usbsrc)/usbd_req.o $(usbsrc)/usbd_ioreq.o $(usbsrc)/usbd_core.o $(otgsrc)/usb_dcd.o $(otgsrc)/usb_dcd_int.o $(otgsrc)/usb_hcd.o $(otgsrc)/usb_hcd_int.o $(otgsrc)/usb_otg.o
+extralibs = lib/cortexm3.o lib/system_stm32f4xx.o lib/stm32f4xx_rcc.o $(psrc)/stm32f4xx_gpio.o $(psrc)/stm32f4xx_usart.o $(usblibs) 
 
 endif
 
-ifneq (,$(findstring $(board),facedancer10))
+ifneq (,$(findstring $(board),facedancer10 facedancer11))
 mcu ?= msp430f2618
 platform := goodfet
 config = monitor spi maxusb
@@ -135,7 +158,7 @@ endif
 ifneq (,$(findstring $(board),tilaunchpad))
 mcu ?=msp430f1612
 CFLAGS := -DDEBUG_LEVEL=3 -DDEBUG_START=1 -DINBAND_DEBUG
-CFLAGS+= -Werror -Wall
+CFLAGS+= -Wall
 config := monitor chipcon i2c
 endif