-mcu = undef
-ifneq (,$(findstring $(board),goodfet20))
-mcu := msp430x1612
+##################################
+## These are production boards.
+##################################
+
+#Unset by default, but can be explicitly overwritten.
+config ?= undef
+
+ifneq (,$(findstring $(board),apimote1 apimote))
+mcu ?= msp430f2618
+platform := apimote
+config := monitor spi ccspi
+MSP430BSL?=goodfet.bsl --speed=38400 --swap-reset-test
+CFLAGS += -Duseuart1 -Dapimote
+endif
+
+ifneq (,$(findstring $(board),goodthopter01 goodthopter10 goodthopter11))
+mcu ?= msp430f2274
+platform := goodfet
+config := monitor spi
+endif
+
+ifneq (,$(findstring $(board),goodfet20 goodfet10 goodfet11))
+mcu ?= msp430f1611
+platform := goodfet
+endif
+
+ifneq (,$(findstring $(board),goodfet21,goodfet22))
+mcu ?= msp430f2618
+platform := goodfet
endif
ifneq (,$(findstring $(board),goodfet30 goodfet31))
-mcu := msp430x2274
+mcu ?= msp430f2274
+platform := goodfet
+# This will link to fit in a '2254, so unneeded packages should be omited.
+CONFIG_ccspi = n
+CONFIG_nrf = y
+endif
+
+ifneq (,$(findstring $(board),goodfet40 goodfet41 goodfet42))
+mcu ?= msp430f2618
+platform := goodfet
+CONFIG_nrf = y
+CONFIG_ccspi = y
+endif
+
+ifneq (,$(findstring $(board),stm32f4discovery))
+
+periph ?= /opt/STM32F4xx_StdPeriph_Driver
+discovery ?= /opt/STM32F4-Discovery_FW_V1.1.0
+
+usbcore ?= $(discovery)/Libraries/STM32_USB_Device_Library/Core
+usbsrc ?= $(usbcore)/src
+otginc ?= /opt/STM32F4-Discovery_FW_V1.1.0/Libraries/STM32_USB_OTG_Driver/inc
+otgsrc ?= /opt/STM32F4-Discovery_FW_V1.1.0/Libraries/STM32_USB_OTG_Driver/src
+
+pincs ?= -I$(periph)/inc -I$(usbcore)/inc -I$(otginc) -I$(discovery)/Libraries/CMSIS/ST/STM32F4xx/Include -I$(discovery)/Libraries/CMSIS/Include -Dassert_param\(x\)= -DUSE_USB_OTG_FS -I/opt/STM32F4-Discovery_FW_V1.1.0/Utilities/STM32F4-Discovery
+psrc ?= /opt/STM32F4xx_StdPeriph_Driver/src
+
+
+GCC = arm-none-eabi-gcc
+CC = arm-none-eabi-gcc
+LD = arm-none-eabi-ld -v
+AR = arm-none-eabi-ar
+AS = arm-none-eabi-as
+CP = arm-none-eabi-objcopy
+OD = arm-none-eabi-objdump
+CFLAGS = -c -fno-common -O1 -g -mcpu=cortex-m3 -mthumb $(pincs)
+AFLAGS = -ahls -mapcs-32
+LFLAGS = -Ttmplink.cmd -nostartfiles
+CPFLAGS = -Obinary
+ODFLAGS = -S
+LDFLAGS =
+
+
+mcu ?= stm32f407
+platform := stm32f4discovery
+config = monitor
+
+# This is a pain.
+#usblibs = $(usbsrc)/usbd_core.o $(usbsrc)/usbd_req.o $(usbsrc)/usbd_ioreq.o $(usbsrc)/usbd_core.o $(otgsrc)/usb_dcd.o $(otgsrc)/usb_dcd_int.o $(otgsrc)/usb_hcd.o $(otgsrc)/usb_hcd_int.o $(otgsrc)/usb_otg.o
+extralibs = lib/cortexm3.o lib/system_stm32f4xx.o lib/stm32f4xx_rcc.o $(psrc)/stm32f4xx_gpio.o $(psrc)/stm32f4xx_usart.o $(usblibs)
+
+endif
+
+ifneq (,$(findstring $(board),facedancer10 facedancer11 facedancer20 facedancer21))
+mcu ?= msp430f2618
+platform := goodfet
+config = monitor spi maxusb
+endif
+
+ifeq ($(board),z1)
+mcu ?= msp430f2617
+platform := z1
+config = monitor spi ccspi
+MSP430BSL?=goodfet.bsl --z1 --speed=38400
+endif
+
+ifneq (,$(findstring $(board),goodfet24))
+mcu ?= msp430f2618
+platform := goodfet
+CONFIG_glitch = y
+CONFIG_nrf = y
+endif
+
+ifneq (,$(findstring $(board),nhb12b))
+mcu ?= msp430f2618
+CONFIG_nrf = y
+platform := nhb12b
endif
-ifneq (,$(findstring $(board),goodfet40 goodfet41))
-mcu := msp430x2618
+ifneq (,$(findstring $(board),nhb12))
+mcu ?= msp430f2618
+CONFIG_nrf = y
+platform := nhb12
endif
ifneq (,$(findstring $(board),goodfet50 goodfet51))
-mcu := msp430x5510
+mcu ?= msp430f5510
+platform := goodfet
+endif
+
+ifeq ($(board),telosb)
+mcu ?= msp430f1611
+platform := telosb
+config := monitor spi ccspi
+CFLAGS += -Duseuart1
+endif
+
+ifeq ($(board),telosbbt)
+mcu ?=msp430f1612
+platform := telosb
+config := monitor spi ccspi
+endif
+
+
+
+
+##################################
+## These are experimental boards.
+##################################
+
+ifneq (,$(findstring $(board),donbfet))
+GCC := avr-gcc
+CC := avr-gcc
+mcu ?= atmega644p
+platform = donbfet
+CFLAGS=$(DEBUG) -Iinclude -mmcu=$(mcu) -W -Os -mcall-prologues -Wall -Wextra -Wuninitialized -fpack-struct -fshort-enums -funsigned-bitfields
+config := monitor avr spi jscan
endif
+ifneq (,$(findstring $(board),zigduino))
+GCC := avr-gcc
+CC := avr-gcc
+mcu ?= atmega128rfa1
+platform = zigduino
+CFLAGS=$(DEBUG) -Iinclude -mmcu=$(mcu) -W -Os -mcall-prologues -Wall -Wextra -Wuninitialized -fpack-struct -fshort-enums -funsigned-bitfields
+config := monitor atmel_radio #avr spi
+AVR_PLATFORM := m128rfa1
+endif
+
+
+ifneq (,$(findstring $(board),arduino))
+GCC := avr-gcc
+mcu ?= atmega168
+#BSL := avrdude -V -F -c stk500v1 -p m328p -b 57600 -P /dev/tty.usbserial-* -U flash:w:blink.hex
+LDFLAGS :=
+config := monitor
+endif
+
+ifneq (,$(findstring $(board),tilaunchpad))
+mcu ?=msp430f1612
+CFLAGS := -DDEBUG_LEVEL=3 -DDEBUG_START=1 -DINBAND_DEBUG
+CFLAGS+= -Wall
+config := monitor chipcon i2c
+endif
+
+
+
+mcu ?= undef
ifeq ($(mcu),undef)
$(error Please define board, as explained in the README)
endif
+#platform := $(board)
-AVAILABLE_APPS = monitor spi jtag sbw jtag430 jtag430x2 i2c jtagarm7 ejtag jtagxscale openocd chipcon avr pic adc nrf ccspi glitch smartcard ps2
-
-CONFIG_sbw = y
+AVAILABLE_APPS = monitor spi jtag sbw jtag430 jtag430x2 i2c jtagarm7 ejtag jtagxscale openocd chipcon avr pic adc nrf ccspi glitch smartcard ps2 slc2 maxusb atmel_radio cc2500
# defaults
CONFIG_monitor ?= y
CONFIG_spi ?= y
+CONFIG_maxusb ?= y
CONFIG_jtag ?= n
CONFIG_sbw ?= n
CONFIG_jtag430 ?= y
CONFIG_jtag430x2 ?= y
CONFIG_i2c ?= n
-CONFIG_jtagarm7 ?= n
+CONFIG_jtagarm7 ?= y
CONFIG_ejtag ?= n
CONFIG_jtagxscale ?= n
CONFIG_openocd ?= y
CONFIG_pic ?= n
CONFIG_adc ?= n
CONFIG_nrf ?= n
-CONFIG_ccspi ?= y
+CONFIG_ccspi ?= n
+CONFIG_cc2500 ?= y
CONFIG_glitch ?= n
CONFIG_smartcard ?= n
CONFIG_ps2 ?= n
+CONFIG_slc2 ?= n
+CONFIG_atmel_radio ?=n
-
-config := $(foreach app,$(AVAILABLE_APPS),$(if $(findstring $(CONFIG_$(app)),y yes t true Y YES T TRUE),$(app)))
-
+#The CONFIG_foo vars are only interpreted if $(config) is "unset".
+ifeq ($(config),undef)
+config += $(foreach app,$(AVAILABLE_APPS),$(if $(findstring $(CONFIG_$(app)),y yes t true Y YES T TRUE),$(app)))
+endif
projects / goodfet / blobdiff